scholarly journals Spatial Variation of Trace Metals between Industrial and Rural Dwelling Birds of India

2021 ◽  
Vol 20 (5) ◽  
Author(s):  
M. Bala ◽  
A. Sharma ◽  
G. Sharma
Keyword(s):  
Trace Metals ◽  
Columba Livia ◽  
Fecal Pellets ◽  
Metal Concentrations ◽  
Industrial Region ◽  
Pollution Levels ◽  
Metal Levels ◽  
Rock Pigeon ◽  
Industrial Regions ◽  
Contamination Levels

A large quantity of trace metals has been continuously polluting the environment as a result of increasing urbanization and industrial processes. In 2016-2017, the metal (Cd, Cu, Cr, Ni, Pb, and Zn) levels were determined in fecal pellets of Blue Rock Pigeon (Columba livia) at Bais Godam (industrial location) in Jaipur and Chittora (rural location) in Rajasthan, India. Fecal pellets in industrial regions which are under higher anthropogenic influence exhibited higher metal concentrations when compared with the fecal pellets of the same species in rural area which have minimal anthropogenic input, with statistically significant industrial-rural differences in the metal concentrations except for Ni. Results obtained in this study, as well as the comparison with literature data, indicated that concentrations of Cr and Cu were high in fecal pellets of Blue Rock Pigeon in the industrial region of the present study. Furthermore, many significant correlations were also observed between metal levels in the industrial region which could be attributed to a similar source. Moreover, contamination levels of pigeon excrement serve as one of the most compelling indicators in terrestrial systems for the monitoring of metal pollution levels.

Rock Pigeon (Columba livia)

2014 ◽  
Author(s):  
Peter E. Lowther ◽  
Richard F. Johnston
Keyword(s):  
Columba Livia ◽  
Rock Pigeon

scholarly journals Significance of building and plumbing specifics on trace metal concentrations in drinking water

1991 ◽  
Vol 18 (6) ◽  
pp. 893-903 ◽  
Author(s):  
Inderjit Singh ◽  
Donald S. Mavinic
Keyword(s):  
Drinking Water ◽  
Trace Metals ◽  
Trace Metal ◽  
Water Samples ◽  
First Flush ◽  
Single Family ◽  
Metal Concentrations ◽  
Building Height ◽  
High Rise ◽  
Family House

Samples were taken from 72 high-rise apartment suites (6 suites in 12 individual high-rise towers) and 60 single-family houses located within the Greater Vancouver Regional District. The influence of the following factors on trace metal concentrations in 1-L first-flush drinking water samples and “running” hot water samples was investigated: building height, location, plumbing age, type of plumbing, and type of building. Results of this survey show that with the exception of building height, all factors had a correlation with one or more of the trace metals investigated. The trace metals examined were lead, copper, iron, and zinc. Lead was influenced primarily by building type, copper by plumbing age and type of plumbing, and iron by location. Elevated lead levels were associated with high-rise samples. New copper plumbing systems resulted in high copper levels. Highest iron levels in the drinking water were measured in the East Vancouver location. Zinc did not show a distinct correlation with any of the factors investigated. Brass faucets were the primary source of zinc in tap water. They also contributed substantially to the lead detected in the 1-L first-flush sample. Metal concentrations measured in the high-rise and house samples were compared with the U.S. Environmental Protection Agency's (USEPA) maximum contaminant levels (MCLs) and the proposed “no-action” level for lead. In high-rise samples, the 0.01 mg/L “no-action” level proposed for lead was exceeded in 43% of the samples, and 62% of the samples exceeded the current 1.0 mg/L MCL standard for copper. In single-family house samples, these values were 47% and 73%, respectively. The average lead concentrations were 0.020 mg/L for all high-rise samples and 0.013 mg/L for house samples. Regulatory levels stated above would still be exceeded in 6% of the cases for lead and 9% of the cases for copper, even after prolonged flushing of the tap in a high-rise building. In all cases associated with single-family houses, flushing the cold water tap for 5 minutes was successful in achieving compliance levels. Key words: aggressive water, compliance, corrosive, drinking water, first-flush, GVRD, high-rise, single-family house, trace metals, USEPA.

scholarly journals Evaluation of Trace Metal Levels in Tissues of Two Commercial Fish Species in Kapar and Mersing Coastal Waters, Peninsular Malaysia

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Fathi Alhashmi Bashir ◽  
Mohammad Shuhaimi-Othman ◽  
A. G. Mazlan
Keyword(s):  
Trace Metal ◽  
Fish Species ◽  
Coastal Waters ◽  
Positive Association ◽  
Peninsular Malaysia ◽  
International Standards ◽  
Metal Concentrations ◽  
Commercial Fish ◽  
Metal Levels ◽  
The Relationship

This study is focused on evaluating the trace metal levels in water and tissues of two commercial fish species Arius thalassinus and Pennahia anea that were collected from Kapar and Mersing coastal waters. The concentrations of Fe, Zn, Al, As, Cd and Pb in these coastal waters and muscle, liver and gills tissues of the fishes were quantified. The relationship among the metal concentrations and the height and weight of the two species were also examined. Generally, the iron has the highest concentrations in both water and the fish species. However, Cd in both coastal waters showed high levels exceeding the international standards. The metal level concentration in the sample fishes are in the descending order livers > gills > muscles. A positive association between the trace metal concentrations and weight and length of the sample fishes was investigated. Fortunately the level of these metal concentrations in fish has not exceeded the permitted level of Malaysian and international standards.

Spatial variability of trace metals in Podzols of northern forest ecosystems: Sampling implications

2003 ◽  
Vol 83 (5) ◽  
pp. 581-587 ◽  
Author(s):  
J. D. MacDonald ◽  
W. H. Hendershot
Keyword(s):  
Trace Metals ◽  
Spatial Variability ◽  
Point Source ◽  
Forest Ecosystems ◽  
Physical Factors ◽  
Individual Plant ◽  
Forest Site ◽  
Organic Carbon Content ◽  
Metal Concentrations ◽  
Northern Forest

The concentrations of metals in soils are spatially heterogeneous and soil sampling carried out when studying metals in forest ecosystems is often inadequate. We examined the spatial variability of Cd, Cu, Mn, Ni, Pb and Zn in northern forest ecosystems on a transect with distance from two point source emitters with the goal of providing basic information about the distribution and variability of metals in these soils. Samples were taken under six sampling points at four depths from three experimental sites on each of the two transects. Soils were analysed for acid digestible metals, pH and organic carbon content. Standard deviation, coefficients of variation, mean and medians were analysed for each horizon of each site. It was observed that Cu and Mn variability is higher in closer proximity to the point source while the variability of Zn increased with decreasing soil pH. In Sudbury, emitted metals Ni and Cu accumulate together in soils, whereas in Rouyn-Noranda, with the exception of Cd and Zn, metal concentrations were not related in forest floors. Observations suggest that physical factors influencing where metals are deposited as well as the inherent variability in soil chemical characteristics, and the distance from the point source can all act together to result in high variability in soil metal concentrations in a single forest site. Sampling in the interest of relating vegetation metal concentrations or response to soil metals should be carried out on an individual plant basis with multiple samples taken for each individual. Soil samples taken at intervals of 1 to 1.7 m will provide relative error in estimating soil concentrations of 10% or 20%, respectively. Key words: Spatial variability, trace metals, podzolic soils, smelter emissions

scholarly journals Trace Metal Contamination Characteristics and Health Risks Assessment ofCommelina africanaL. and Psammitic Sandflats in the Niger Delta, Nigeria

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Nsikak U. Benson ◽  
Paul A. Enyong ◽  
Omowunmi H. Fred-Ahmadu
Keyword(s):  
Trace Metal ◽  
Niger Delta ◽  
Anthropogenic Activities ◽  
Hazard Quotient ◽  
Risk Index ◽  
Sediment Quality ◽  
Hazard Index ◽  
Adult Males ◽  
Metal Concentrations ◽  
Metal Levels

The purpose of this study was to investigate and quantify trace metal concentrations inCommelina africanaL. and psammitic sandflats from an intertidal coastal ecosystem in Niger Delta, Nigeria, and to evaluate their spatial distribution, degree of contamination, and source apportionment. The environmental risks associated with soil contamination were elaborately assessed using potential ecological risk index, sediment quality guidelines, and enrichment relative to background levels. The mean concentrations of Cd, Cr, Ni, Pb, and Zn in sandflat soil samples are0.76±9.0×10-2,7.39±8.7×10-1,2.28±0.35,0.024±4.0×10-3, and74.51±2.55 mg/kg, respectively. Metal levels indicate strong variability with sampling sites. The order of trace metal concentrations in theCommelina africanaL. samples isZn>Ni>Cr>Pb>Cd. The concentrations varied with the sample locations; and the levels of Pb (0.05 to 0.08 mg/kg) at all locations are found to be significantly below permissible level of 0.3 mg/kg. Potential sources of metal loadings may be associated with localised or diffused anthropogenic activities. The average carcinogenic risks are below1.0×10-6threshold values, and the sandflat soils are not considered to pose significant health effects to children and adult males and females. However, the carcinogenicity and noncarcinogenicity risks ranking decrease following the orderchildren>adult  males>adult  females. Comparatively, the hazard quotient and hazard index indicate that the psammitic sandflats might pose a health risk to children in future.

scholarly journals Atmospheric trace metals measured at a regional background site (Welgegund) in South Africa

2017 ◽  
Vol 17 (6) ◽  
pp. 4251-4263 ◽  
Author(s):  
Andrew D. Venter ◽  
Pieter G. van Zyl ◽  
Johan P. Beukes ◽  
Micky Josipovic ◽  
Johan Hendriks ◽  
...  
Keyword(s):  
South Africa ◽  
Trace Metals ◽  
Trace Metal ◽  
Size Fraction ◽  
Abundant Species ◽  
Metal Species ◽  
Metal Concentrations ◽  
Igneous Complex ◽  
Size Fractions ◽  
Bushveld Igneous Complex

Abstract. Atmospheric trace metals can cause a variety of health-related and environmental problems. Only a few studies on atmospheric trace metal concentrations have been conducted in South Africa. Therefore the aim of this study was to determine trace metal concentrations in aerosols collected at a regional background site, i.e. Welgegund, South Africa. PM1, PM1–2. 5 and PM2. 5–10 samples were collected for 13 months, and 31 atmospheric trace metal species were detected. Atmospheric iron (Fe) had the highest concentrations in all three size fractions, while calcium (Ca) was the second-most-abundant species. Chromium (Cr) and sodium (Na) concentrations were the third- and fourth-most-abundant species, respectively. The concentrations of the trace metal species in all three size ranges were similar, with the exception of Fe, which had higher concentrations in the PM1 size fraction. With the exception of titanium (Ti), aluminium (Al) and manganese (Mg), 70 % or more of the trace metal species detected were in the smaller size fractions, which indicated the influence of industrial activities. However, the large influence of wind-blown dust was reflected by 30 % or more of trace metals being present in the PM2. 5–10 size fraction. Comparison of trace metals determined at Welgegund to those in the western Bushveld Igneous Complex indicated that at both locations similar species were observed, with Fe being the most abundant. However, concentrations of these trace metal species were significantly higher in the western Bushveld Igneous Complex. Fe concentrations at the Vaal Triangle were similar to levels thereof at Welgegund, while concentrations of species associated with pyrometallurgical smelting were lower. Annual average Ni was 4 times higher, and annual average As was marginally higher than their respective European standard values, which could be attributed to regional influence of pyrometallurgical industries in the western Bushveld Igneous Complex. All three size fractions indicated elevated trace metal concentrations coinciding with the end of the dry season, which could partially be attributed to decreased wet removal and increases in wind generation of particulates. Principal component factor analysis (PCFA) revealed four meaningful factors in the PM1 size fraction, i.e. crustal, pyrometallurgical-related and Au slimes dams. No meaningful factors were determined for the PM1–2. 5 and PM2. 5–10 size fractions, which was attributed to the large influence of wind-blown dust on atmospheric trace metals determined at Welgegund. Pollution roses confirmed the influence of wind-blown dust on trace metal concentrations measured at Welgegund, while the impact of industrial activities was also substantiated.

scholarly journals External fixation to correct tarsal-metatarsal fracture in rock pigeon (Columba livia)

Revista CERES ◽  
2017 ◽  
Vol 64 (1) ◽  
pp. 25-30
Author(s):  
Leandro Almeida Rui ◽  
Diego Carvalho Viana ◽  
Adriano Barile Dora ◽  
Paula Fratini
Keyword(s):  
Gold Standard ◽  
Minimal Invasive Surgery ◽  
Surgical Repair ◽  
Bone Fractures ◽  
Columba Livia ◽  
Minimal Invasive ◽  
External Fixators ◽  
Post Surgery ◽  
Metatarsal Fracture ◽  
Rock Pigeon

ABSTRACT Orthopedic conditions, such as bone fractures, are very common in avian medicine. External fixators have been considered the gold standard for birds, since they allow early movement of the limbs and minimal invasive surgery. Fractures in several bones have been successfully treated in pigeons. However, to the best of our knowledge, this case represents the first report of successful surgical repair of tarsal-metatarsal fracture in rock pigeon. External fixator was made with four 24G catheters, being inserted manually proximal and distal to the fracture and connected with polymerizable acrylic. Radiographic consolidation of fracture was observed 60 days post-surgery and anti-inflammatory and antibiotic protocols were successful on avoiding pain and infection during surgery and bone healing.

Intellectual Capital of Technological Transformation of Economy of Industrial Region

2021 ◽  
Vol 20 (4) ◽  
pp. 641-665
Author(s):  
A.A. Chursin ◽  
◽  
A.V. Yudin ◽  
P.Yu. Grosheva ◽  
◽  
...  
Keyword(s):  
Intellectual Capital ◽  
Industrial Development ◽  
Technological Development ◽  
Practical Significance ◽  
High Tech ◽  
Time Interval ◽  
Technological Transformation ◽  
Industrial Region ◽  
Technological Structure ◽  
Industrial Regions

The relevance of the research topic is due to the need to strengthen and expand the technological transformation of the Russian economy, which should contribute to the growth of high-tech products production and increase the competitiveness of domestic manufacturers in the world market. The hypothesis of the study is that the component features of the intellectual capital of the industrial region determine the predisposition/absence of predisposition of its economy to make a transition to a new dominant technological structure. The purpose of the scientific research is to identify the types of intellectual capital and which of them form the predisposition of regions to the technological transformation of their economies. During the study, the following tasks were solved: structural elements of intellectual capital that affect the innovative and technological development of the region, namely: education, are justified; innovative competencies; innovative skills; altruism; cognitive and non-cognitive competencies; sensitivity to change and adaptation to technological changes. Extractive, mono-inclusive and multi-inclusive type of intellectual capital of industrial regions, corresponding to the fourth, fifth and sixth technological framework, respectively, is disclosed. A methodology for estimating intellectual capital, which determines the dominant technological structure of the economy of the industrial region, has been developed on the basis of the use of the matrix method and Frobenius norms, which make it possible to conduct research over a long-time interval taking into account the dynamic trends of the main capital elements. The testing of the author's methodology revealed that such territories as Kemerovo Region, Nizhny Novgorod Region, Perm Territory, Republic of Bashkortostan, Republic of Tatarstan, Sverdlovsk Region, Udmurt Republic, Chelyabinsk Region, Chuvash Republic and Yaroslavl Region have intellectual capital for further technological development of the region's economy. The novelty of the obtained results lies in the development of a typology of regions, which enables one to identify the territories most prone to further technological transformation of the economy in the context of types of intellectual capital. The practical significance of the results obtained lies in the possibility of their use by authorities as a tool for developing a strategy for industrial development and structural adjustment of the economy of industrial regions.

Sign in / Sign up

Export Citation Format

Share Document