scholarly journals ADSORPTION STUDIES ON THE REMOVAL OF NAPHTOL-AS DYE USING IRON FILINGS AS ADSORBENT

2021 ◽  
Vol 46 (2) ◽  
Author(s):  
C. M. Ngwu ◽  
O. K. Amadi ◽  
M. O. Mac-Kalunta ◽  
J. Onyeuwaoma
Keyword(s):  
Experimental Data ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Processes ◽  
Pseudo Second Order ◽  
Controlled Adsorption

This study investigated the potential of iron filings as low cost and environmentally friendly adsorbent for removing Naphthol AS dye from aqueous solutions. The batch-adsorption experiments were performed as a function of pH, temperature, concentration, contact time as well as dynamics of the process. The Langmuir, Freundlich and Dubinin-Raduskevich isotherm models for the adsorption processes were tested but Freundlich isotherm provided the best description for adsorption of the dye solution onto the iron filings, suggesting a physisorption controlled adsorption. The adsorption process was highly pH-dependent and the result indicates that the optimum pH for adsorption of Naphthol AS onto the adsorbent occurred at 4.0 having a maximum removal efficiency of 88 % respectively. Pseudo first-order and second-order as well as the intra-particle diffusivity kinetic models were applied to the experimental data and results showed that the pseudo second-order provided best fit for the experimental data. Kinetic studies also showed that the adsorption transport mechanism was particle-diffusion controlled.

scholarly journals Parametric, equilibrium and kinetic studies on the removal of mercury using ion exchange resin

2017 ◽  
Vol 12 (2) ◽  
pp. 305-313 ◽  
Author(s):  
N. Rajamohan ◽  
M. Rajasimman
Keyword(s):  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Strong Acid ◽  
Ion Exchange Resin ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Acid Cation ◽  
Pseudo Second Order ◽  
Langmuir Constants

This experimental research was an investigation into removal of mercury by using a strong acid cation resin, 001 × 7. Parametric experiments were conducted to determine the optimum pH, resin dosage, agitation speed and the effect of change in concentration in the range of 50–200 mg/L. High resin dosages favoured better removal efficiency but resulted in lower uptakes. Equilibrium experiments were performed and fitted to Langmuir and Freundlich isotherm models. Langmuir model suited well to this study confirming the homogeneity of the resin surface. The Langmuir constants were estimated as qmax = 110.619 mg/g and KL = 0.070 L/g at 308 K. Kinetic experiments were modeled using Pseudo second order model and higher values of R2 (>0.97) were obtained. The Pseudo second order kinetic constants, namely, equilibrium uptake (qe) and rate constant (k2), were evaluated as 59.17 mg/g and 40.2 × 10−4 g mg−1 min−1 at an initial mercury concentration of 100 mg/L and temperature of 308 K.

scholarly journals Prediction of adsorption efficiency for the removal malachite green and acid blue 161 dyes by marble sludge dust using ANN

2014 ◽  
Vol 16 (4) ◽  
pp. 676-689 ◽  
Keyword(s):  
Experimental Data ◽  
Malachite Green ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Ann Model ◽  
Marble Dust ◽  
Pseudo Second Order ◽  
Acid Blue

<div> <p>In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were analyzed by Langmuir, Freundlich and Temkin adsorption isotherm models. The Langmuir and Freundlich adsorption models agree well with experimental data. The pseudo-second order, intraparticle intraparticle diffusion and Elovich kinetic models were applied to the experimental data in order to describe the removal mechanism of dye ions by waste marble dust. The pseudo-second order kinetic was the best fit kinetic model for the experimental data. Thermodynamics parameters such as Δ<em>G</em>, Δ<em>H</em> and Δ<em>S </em>were also calculated for the adsorption processes. The experimental data were used to construct an artificial neural network (ANN) model to predict removal of malachite green and acid blue 161 dyes by waste marble dust. A three-layer ANN, an input layer with four neurons, a hidden layer with 12 neurons, and an output layer with one neuron is constructed. Different training algorithms were tested on the model to obtain the proper weights and bias values for ANN model. The results show that waste marble dust is an efficient sorbent for malachite green dye and ANN network, which is easy to implement and is able to model the batch experimental system.</p> </div> <p>&nbsp;</p>

scholarly journals Biosorption of cationic and anionic dyes using the biomass of Aspergillus parasiticus CBS 100926T

2021 ◽  
Author(s):  
Hadj Daoud Bouras ◽  
Ahmed RédaYeddou ◽  
Noureddine Bouras ◽  
Abdelmalek Chergui ◽  
Lidia Favier ◽  
...  
Keyword(s):  
Aspergillus Parasiticus ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Isotherm Models ◽  
Phenol Red ◽  
Order Kinetic ◽  
Acid Dyes ◽  
Anionic Dyes ◽  
Adsorption Processes ◽  
Pseudo Second Order

Aspergillus parasiticus (A. parasiticus) CBS 100926T was used as a biosorbent for the removal of Methylene Blue (MB), Congo Red (CR), Sudan Black (SB), Malachite Green Oxalate (MGO), Basic Fuchsin (BF) and Phenol Red (PR) from aqueous solutions. The batch biosorption studies were carried out as a function of dye concentration and contact time. The biosorption process followed the pseudo-first-order and the pseudo-second-order kinetic models and the Freundlich and Langmuir isotherm models. The resulting biosorbent was characterized by Scanning Electron Microscopy (SEM), X-Ray Diffractometer and Fourier Transformer Infrared Spectroscopy (FTIR) techniques. The results of the present investigation suggest that A. parasiticus can be used as an environmentally benign and low cost biomaterial for the removal of basic and acid dyes from aqueous solution. HIGHLIGHTS Micro-fungi Aspergillus parasiticus CBS100926T was employed as a new biosorbent for the biosorption of six dyes. The maximum dye capacity was found to be 131.58 mg/g. Adsorption processes can reach equilibrium within 120 min. Adsorption processes follow the pseudo-second-order rate equation. The results of equilibrium sorption were described through Freundlich isotherm.

The Removal of Heavy Metals from Aqueous Solution by Utilizing Modified β-Cyclodextrin Microspheres

2010 ◽  
Vol 113-116 ◽  
pp. 632-638
Author(s):  
Feng Yu Li ◽  
Xiao Mei Sun ◽  
Bu Hai Li
Keyword(s):  
Heavy Metals ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Heavy Metal Concentration ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order

Batch adsorption experiments were carried out to remove heavy metals Cu(II)and Ni(II) by pyromellitic dianhydride (PMDA) grafted β-Cyclodextrin (β-CD). The effects concerning the pH of the solution, contact time and initial heavy metal concentration were studied and discussed. The adsorption values increased significantly after a large number of carboxyl groups were gragfted on the microspheres surface. In order to investigate the mechanism of sorption, adsorption data were modeled using the pseudo-first-order and pseudo-second-order kinetic equation. It was found that kinetic studies showed good correlation coefficients for a pseudo-second-order kinetic model, confirming that the sorption rate was controlled by chemical adsorption. The equilibrium process was better described by the Langmuir isotherm than the Freundlich isotherm. XPS analysis further confirmed that the carboxyl group which grafted on the surface of the β-CD microspheres play a very important role in the removal of heavy metals.

scholarly journals Study of the Digestate as an Innovative and Low-Cost Adsorbent for the Removal of Dyes in Wastewater

Processes ◽  
2020 ◽  
Vol 8 (7) ◽  
pp. 852
Author(s):  
Sicong Yao ◽  
Massimiliano Fabbricino ◽  
Marco Race ◽  
Alberto Ferraro ◽  
Ludovico Pontoni ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Removal Rate ◽  
Low Cost ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Diffusion Kinetic ◽  
Pseudo Second Order

Digestate, as an urban solid waste, was considered as an innovative adsorbent for colorant polluted wastewater. Batch adsorption experiments were carried out using digestate as an adsorbent material to remove various dyes belonging to different categories. The removal rate and adsorption capacity of dyes were evaluated and the dose of digestate, contact time, and initial dye concentration were studied. The maximum removal rate was approximately 96% for Methylene Blue. The equilibrium time for the Methylene Blue was 4 h, while for other dyes, a longer contact time was required to reach the equilibrium. The suspicion of colloidal matter release into the solution from solid fraction of the digestate led to the investigation of the consequence of a washing step of the digestate adsorbent upstream the adsorption experiment. Washed and not washed adsorbents were tested and the differences between them in terms of dye removal were compared. Moreover, experimental data were fitted by pseudo-first order, pseudo-second order, and intra-partial diffusion kinetic models as well as Langmuir, Freundlich, and Sips isotherm models. The results from fitted models showed that the adsorption of various dyes onto the digestate was mostly well fitted by the Langmuir isotherm and pseudo-second-order kinetic model.

scholarly journals Removal of Carcinogenic Dyes Congo red (CR) and Bismarck brown Y (BBY) by Adsorption onto Reusable Hydrogels Derived from Acrylamide

2021 ◽  
Vol 2063 (1) ◽  
pp. 012011
Author(s):  
Huda S Al-Niaeem ◽  
Ali A Abdulwahid ◽  
Whidad S Hanoosh
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Congo Red ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Sulphonic Acid ◽  
Isotherm Models ◽  
Anionic Dyes ◽  
Best Fitting ◽  
Pseudo Second Order

Abstract Hydrogels of acrylamide (AM), acrylamide\ 2-acrylamido-2-methyl-1-propane sulphonic acid (AMS), and acrylamide\ 2-acrylamido-2-methyl-1-propane sulphonic acid\graphene oxide (AMSGO) were prepared as adsorbents to remove carcinogenic dyes Congo red (CR) and Bismarck brown Y (BBY) from aqueous solutions. Hydrogels were characterized using FSEM and XRD analyses. For both dyes, the synthesized hydrogels demonstrated high adsorption capability at near-neutral pH. Experimental adsorption data were analyzed using the Langmuir and Freundlich isotherm models. It was found that the Langmuir model was more suitable for the experimental data. Kinetic studies found that the pseudo-second-order model demonstrated the best fitting to the experimental data. In addition, thermodynamic studies suggest that the adsorption process was spontaneous and endothermic. The prepared hydrogels were regenerated and reused in four consecutive cycles and it could be applied to remove anionic dyes from aqueous solutions as an effective adsorbent.

Removal of Reactive Black 5 from wastewater using natural clinoptilolite modified with apolaccase

Clay Minerals ◽  
2015 ◽  
Vol 50 (1) ◽  
pp. 65-76 ◽  
Author(s):  
Hayrunnisa Nadaroglu ◽  
Ekrem Kalkan ◽  
Neslihan Celebi ◽  
Esen Tasgin
Keyword(s):  
Thermodynamic Parameters ◽  
Contact Time ◽  
Low Cost ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Isotherm Models ◽  
Reactive Black 5 ◽  
Pseudo Second Order ◽  
Natural Clinoptilolite

AbstractIn this study, a clinoptilolite modified with apolaccase was used to adsorb Reactive Black 5 (RB5) dye from aqueous solution using the batch procedure. The influences of pH, contact time, temperature and absorbent dosage on the adsorption were investigated. The optimum adsorption was obtained at pH = 6, contact time = 60 min, temperature = 25ºC and adsorbent dosages of 1.62 and 1.59 mg/50 mL per gram of clinoptilolite and of apolaccase-modified clinoptilolite (LMC), respectively). The adsorption experimental data fitted both the Langmuir and Freundlich isotherm models well. In addition, pseudo-first-order and pseudo-second-order kinetics were used to study the kinetics of RB5 dye adsorption onto natural clinoptilolite and LMC. Adsorption appears to follow pseudo-second-order kinetics with a high correlation coefficient. Thermodynamic parameters such as changes in the free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) of adsorption were calculated. The thermodynamic parameters indicate that the adsorption of RB5 dye onto LMC was less spontaneous, feasible and endothermic. The LMC can be used as an alternative low-cost adsorbent for the dye removal from aqueous solutions.

Isotherms and kinetic studies on adsorption of Hg(II) ions onto Ziziphus spina-christi L. from aqueous solutions

2016 ◽  
Vol 5 (2) ◽  
Author(s):  
Ali Hashem ◽  
Alaauddin Al-Anwar ◽  
Negma M. Nagy ◽  
Doaa M. Hussein ◽  
Sara Eisa
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Kinetic Studies ◽  
Plant Residue ◽  
Batch Adsorption ◽  
Pseudo First Order Reaction ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Pseudo Second Order

AbstractL. (ZscL) is a plant residue that has been used as adsorbent for the removal of Hg(II) ions from an aqueous solution. The ability of ZscL to adsorb Hg(II) ions was investigated by using the batch adsorption procedure. It was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) to support the adsorption of Hg(II) ions. The effects of various parameters on the adsorption process, such as contact time, adsorbent concentration, solution pH and initial concentrations of metal ions were studied to optimize the conditions for maximum adsorption. Experimental equilibrium data were fitted to the Freundlich, Langmuir, Dubinin-Radushkevich, Halsey and Temkin (two parameter models), Redlich-Peterson, Sips, Khan, Hill, Radke-Prausnitz, Langmuir-Freundlich and Toth (three parameter models), Fritz-Schlunder and Baudu (four parameter models) and Fritz-Schlunder (five parameter model) at 30°C by using nonlinear regression analysis. The examination of error analysis methods showed that the Halsey model provides the best fit for experimental data compared with the other isotherms. Various kinetic models have been applied to the experimental data to predict the adsorption kinetics. It was found that pseudo-second-order rate was better obeyed than pseudo-first-order reaction, supporting that the chemisorption process was involved. The obtained results show that ZscL can be used as an effective and natural low-cost adsorbent for the removal of Hg(II) ions from aqueous solutions.

scholarly journals Kinetics and adsorption studies of lead (II) onto activated carbon using low cost adsorbents

2018 ◽  
Vol 20 (2) ◽  
pp. 381-388 ◽  
Keyword(s):  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Rate Limiting Step ◽  
Bambusa Vulgaris ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Fagopyrum Esculentum Moench

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch adsorption technique. All the Adsorption isotherm models fitted well with the adsorption data. However, Freundlich isotherm displayed a better fitting model than the other two isotherm models due to high correlation coefficient (R2). This indicates the applicability of multilayer coverage of the Pb (II) on the surface of adsorbent. The adsorption kinetics was studied using four simplified models and it was found to follow the pseudo-second-order kinetic model which confirmed the applicability of the model. The adsorption mechanism was found to be chemisorption and the rate-limiting step was mainly surface adsorption.

scholarly journals Batch Adsorption of Safranin Dye from an Aqueous Solution of Balanites aegyptiaca Seed Coats

2020 ◽  
pp. 48-54
Author(s):  
Buhari Magaji ◽  
Aisha U. Maigari ◽  
Usman A. Abubakar ◽  
Mukhtar M. Sani ◽  
Amina U. Maigari
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficient ◽  
Low Cost ◽  
Kinetic Studies ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Seed Coats

This study was aimed at using Balanite aegyptiaca seed coats activated carbon (BAAC) as a potential adsorbent to remove safranin dye from aqueous solution. BAAC was prepared from Balanite aegyptiaca seed coats using a one-step procedure with 67.27% yield, 3.23% ash content, 695 m2/g surface area and 203 mg/g iodine number. The FTIR spectroscopy revealed O-H, N-H, C-H, C=C, C-O-H stretching vibrations. The influences of agitation time, initial dye concentration and adsorbent dose were studied in batch experiments at room temperature. The adsorptions were rapid at the first 15 minutes of agitation, with the uptake of 2.746 mg/kg. The adsorption equilibrium was achieved at 90 minutes of agitation. Kinetic studies showed good correlation coefficient for both pseudo-first order and pseudo-second-order kinetics model but fitted well into pseudo-second order kinetic model. The adsorption data fitted well into Langmuir isotherm with correlation coefficient (R2) very close to unity and Langmuir maximum adsorption constant, qm  1.00. Thus, the fitting into Langmuir indicates monolayer coverage on the adsorbents. The results showed that BAAC has the potential to be applied as alternative low-cost adsorbents in the remediation of dye contamination in wastewater.

Sign in / Sign up

Export Citation Format

Share Document