scholarly journals Performance of gerbera varieties under naturally ventilated polyhouse

2021 ◽  
Vol 23 (3) ◽  
pp. 351-355
Author(s):  
M. VIJAYALAXMI ◽  
Keyword(s):  
Leaf Area ◽  
Chlorophyll Content ◽  
Plant Height ◽  
Growth Parameters ◽  
Flower Stalk ◽  
Disc Diameter ◽  
Stalk Diameter ◽  
Flower Diameter ◽  
Number Of Leaves ◽  
Ray Florets

An experiment was conducted to evaluate ten varieties of gerbera under polyhouse conditions in Hyderabad. Vegetative, flowering and flower characters varied significantly among the cultivars and variations in different growth parameters were prominent. Mean performance of the cultivars revealed that cv. Helix recorded maximum plant height, flower diameter, flower stalk diameter and ray florets. The same cultivar Helix also produced maximum number of suckers per plant, number of flowers per plant, Fresh weight of flower, dry weight of flower and possessed longest field life which was at par with cv. Goliath. The cv. Goliath found superior with respect to maximum chlorophyll content, minimum days required for commence of first-flower and days taken for 50% flowering.Maximum disc diameter and number of leaves were produced by cv. balance. While cv. Savannah had significantly maximum leaf area and length of the flower stalk. However, the cv. ‘Montenegro recorded least mean value in terms of plant height, number of leaves per plant, leaf length, leaf breadth, leaf area, number of suckers, chlorophyll content, flower diameter, flower stalk diameter, ray florets, disc diameter, number of flowers per plant and took maximum days for first flower opening, 50 % flowering and which was late in inducing flowering had lesser duration of flowering. Cultivar Helix exerted best performance on various growth and flower characters along with the cultivars Goliath, Danaellen, Balance and Savannah.

scholarly journals Heritability Analysis and Phenotypic Characterization of Spider Plant (Cleome gynandra L.) for Yield

2018 ◽  
Vol 2018 ◽  
pp. 1-11
Author(s):  
Ann Kangai Munene ◽  
Felister Nzuve ◽  
Jane Ambuko ◽  
Damaris Odeny
Keyword(s):  
Genetic Variation ◽  
Leaf Area ◽  
Chlorophyll Content ◽  
Plant Height ◽  
Single Leaf ◽  
High Heritability ◽  
Number Of Leaves ◽  
Stem Colour ◽  
Spider Plant

Knowledge on phenotypic diversity among existing spider plant accessions is a milestone in the improvement of spider plant, which is a highly nutritious indigenous vegetable in Kenya. A study involving agronomic and morphological characterization of 49 spider plant accessions assembled from East and South Africa was carried out at the University of Nairobi Field Station for two seasons in a randomized complete block design with three replications. Phenotypic data was collected on growth habit, flower, petiole, leaf and stem colour, petiole, leaf and stem hairiness, number of leaves per plant, plant height, number of primary branches, leaf length and width, single leaf area, and chlorophyll content according to FAO descriptors with modifications. Data was analyzed using both DARwin software V6 and Genstat Version 14. We observed significant differences among the traits implying great genetic variability among the evaluated spider plant accessions. The high genetic variation was further validated using the Unweighted Pair Group Method with Arithmetic mean (UPGMA) clustering method with stem and flower colour as key traits. The 49-spider plant accessions were clustered into 2 major groups, each consisting of Kenyan and South African accessions. Stepwise regression revealed that plant height had the most influence on yield in terms of number of leaves per plant. We also observed high heritability for several traits including days to flowering (91%), number of leaves per plant (99%), plant height (99%), number of primary branches (94%), chlorophyll content (94%), and single leaf area (87%). Our results reveal the high genetic variation between different spider plant accessions, especially from different regions of Africa that could be further exploited to improve productivity in the plant. The high heritability of most of the yield related traits is promising for improving yield in the crop through direct selection.

scholarly journals Pengaruh konsentrasi zpt giberalin dan lama penyinaran terhadap pertumbuhan dan hasil tanaman krisan (Chrysanthemum morifolium)

2019 ◽  
Vol 3 (1) ◽  
pp. 84
Author(s):  
Dian Rifalasna ◽  
Sumarsono Sumarsono ◽  
Budi Adi Kristanto
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Irradiation Time ◽  
Chrysanthemum Morifolium ◽  
Stem Diameter ◽  
Growth And Yield ◽  
Cut Flowers ◽  
Central Java ◽  
Flower Diameter ◽  
Number Of Leaves

ABSTRACT               This study aims to examine the effect of giberalin ZPT concentration and duration of irradiation on the growth and yield of chrysanthemum (Chrysanthemum morifolium) cut flowers. The study took place in February - June 2018. The study was conducted in Mendongan Village, Sumowono District, Semarang Regency, Central Java.  ABSTRACT  This study aimed to examine the effect of giberalin concentration and duration of irradiation on the growth and yield of chrysanthemum (Chrysanthemum morifolium) cut flowers. The study took place in February - June 2018. The study was conducted in Mendongan Village, Sumowono District, Semarang Regency, Central Java. The design used in the study was a Completely Randomized Factorial 4x4 Design. The first factor was gibberallin treatment consisted of G1: GA 0 ppm, G2: GA 10 ppm, G3: GA 20 ppm, G4: GA 30 ppm. The second factor was the irradiation time consisted of R1: 1 hour irradiation time, R2: 2 hours irradiation time, R3: 3 hours irradiation time, and R4: 4 hours irradiation time. Parameters observed were plant height, stem diameter, number of leaves, leaf area, number of flowers, flower diameter, flowering age and flower harvesting age.The results showed that the treatment of giberalin concentration significantly affected the parameters of the amount of interest. While the irradiation treatment time significantly affected the parameters of plant height, number of leaves, flower diameter, stem diameter, age of flowering, and leaf area. Keywords: Giberalin, Chrysanthemum, Irradiation Period ABSTRAK  Penelitian ini bertujuan untuk mengkaji pengaruh konsentrasi ZPT giberalin dan lama penyinaran terhadap pertumbuhan dan hasil bunga potong tanaman krisan (Chrysanthemum morifolium). Penelitian berlangsung pada bulan Februari - Juni 2018. Penelitian dilakukan di Desa Mendongan, Kecamatan Sumowono, Kabupaten Semarang, Jawa Tengah. Rancangan yang digunakan dalam penelitian adalah Percobaan Faktorial 4x4 Rancangan Acak Lengkap (RAL). Faktor pertama yaitu perlakuan giberalin sebanyak 4 taraf yaitu G1 : GA 0 ppm, G2 : GA 10 ppm, G3 : GA 20 ppm, G4 : GA 30 ppm. Faktor kedua adalah lama penyinaran dengan 4 taraf yaitu R1 : lama penyinaran 1 jam, R2 : lama penyinaran 2 jam, R3 : lama penyinaran 3 jam, dan R4 : lama penyinaran 4 jam. Parameter yang diamati adalah tinggi tanaman, diameter batang, jumlah daun, luas daun, jumlah bunga, diameter bunga, umur berbunga dan umur panen bunga. Hasil penelitian menunjukkan bahwa konsentrasi giberalin berpengaruh nyata terhadap peningkatan jumlah bunga yang bertambah banyak. Sedangkan lama penyinaran berpengaruh nyata terhadap peningkatan tinggi tanaman, jumlah daun, diameter bunga, diameter batang, umur berbunga, dan luas daun. Kata Kunci :Giberalin, Krisan, Lama Penyinaran

scholarly journals Effects of Moringa Leaf Extract and Poultry Manure on the Growth Parameters of Sweet Maize

2021 ◽  
Vol 11 (1) ◽  
pp. 10-18
Author(s):  
Alubiagba D.O ◽  
Ovharhe O.J ◽  
Akparobi S.O
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Leaf Extract ◽  
Growth Parameters ◽  
Block Design ◽  
Poultry Manure ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Plant Stem ◽  
Moringa Leaf Extract

This study examined the effects of moringa leaf extract (MLE) and poultry manure (PM) on the growth parameters of sweet maize. The experiment was a Randomized Complete Block Design involving nine treatments: control (no extract), 3% MLE, 6% MLE, 9% MLE, 3% MLE + 15 t/ha–1 PM, 6% MLE + 15 t/ha–1 PM, 9% MLE + 15 t/ha–1 PM, 15 t/ha–1 PM, and 30 t/ha–1 PM. Data on growth parameters including plant height, number of leaves per plant, stem girth, and leaf area were collected and analyzed. The results of the study show that there were significant differences (P = 0.05) among the treatments because plots that received 30 t/ha–1 PM performed best on plant height (193.6 and 152.8 cm) number of leaves (13.1 and 10.2), stem girth (3.75 and 3.22 cm), and leaf area (584.9 and 402.9 cm2) in both early and late season. This was followed by plots that received 9% MLE and 15 t/ha–1 PM, with values of 189.0 and 152.2 cm; 12.5 and 10.0; 3.58 3.15 cm; and 546.2 and 392.2 cm2, respectively. The study concluded that 30 t/ha–1 PM can be used to yield effective growth parameters in sweet maize and is hereby recommended to extension workers for dissemination to farmers

scholarly journals Effects of Individual and Combined Application of Organic Plus NPK (15:15:15) Fertilizers on the Growth Parameters of Tomato (Lycopersicon esculentum. Mill)

2019 ◽  
Vol 2 (1) ◽  
Keyword(s):  
Lycopersicon Esculentum ◽  
Leaf Area ◽  
Plant Height ◽  
Root Length ◽  
Growth Parameters ◽  
Organic Fertilizer ◽  
Loamy Sand ◽  
Lycopersicon Esculentum Mill ◽  
Combined Application ◽  
Number Of Leaves

Research was carried out to evaluate the effects of individual and combined application of organic, NPK (15:15:15), organic plus NPK (15:15:15), fertilizers on the growth parameters of tomato (Lycopersicon esculentum. Mill) in the greenhouse condition of The Oke – Ogun Polytechnic, Saki (Derived savannah), Oyo State, Nigeria. Study was conducted in complete randomized design (CRD). Treatments were at four levels and replicated three times. The soil used was loamy sand. Results showed that the highest average number of leaves (140), number of roots (136), root girth (19.3 cm) and root length (40.8 cm) were achieved in organic plus NPK, highest average plant height (78.4 cm) and stem girth (7.6 cm) was achieved at 50 gm level of NPK (15:15:15) fertilizer treatment, while the highest average leaf area (45.6 cm2) was achieved at 50 gm level of organic fertilizer, the control values were far reduced compared to other levels of treatments. The analysis of variance indicated that organic fertilizer, organic plus NPK (15:15:15) fertilizers had significant (p ≤ 0.05) effects on number of roots, plant height, stem girth, root girth, leaf area, root length and number of leaves. NPK (15:15:15) fertilizer had significant (p ≤ 0.05) effect on number of leaves, plant height and leaf area and no significant (p ≤ 0.05) effects on number of roots, stem girth, root girth and root length, however, 50 gm level of treatment of organic fertilizer had distinct improved significant (p ≤ 0.05) effects on four (4) growth parameters; number of leaves, stem girth, root girth and root length when compared with other levels of treatments for NPK (15:15:15), organic plus NPK (15:15:15) fertilizers, therefore, 50 gm level of organic fertilizer could be applied for better production of Tomato (Lycopersicon esculentum. Mill) in a loamy sand soil.

scholarly journals Influence of Substrate Composition and Container Size on the Growth of Tissue Culture Propagated Apple Rootstock Plants

Agronomy ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2450
Author(s):  
Jae Kyung Kim ◽  
Md. Rayhan Ahmed Shawon ◽  
Jin Hee An ◽  
Yeo Jong Yun ◽  
Soo Jeong Park ◽  
...  
Keyword(s):  
Tissue Culture ◽  
Leaf Area ◽  
Chlorophyll Content ◽  
Plant Height ◽  
Peat Moss ◽  
Initial Growth ◽  
Fresh Weight ◽  
Apple Rootstock ◽  
Substrate Composition ◽  
Number Of Leaves

Substrate composition and container size are considered crucial for apple rootstock grown in a plug seedling system. This study investigated the effect of substrate material’s proportion and different container volumes on the growth of apple rootstock (M-9) plants propagated by tissue culture. In substrate composition, three different ratios of peat moss (PM): vermiculite (VL): perlite (PL) at 1:1:1 (S1), 1:2:3 (S2), 3:1:2 (S3) were used. For container size, plants were grown in 1000 mL (C1), 500 mL (C2), and 300 mL (C3) containers filled by 1:1:1 mixture of PM, VL and PL. In both cases, plants were treated eleven weeks in a green house. Our results demonstrate that the plant height, number of leaves, leaf area, shoot fresh weight and root fresh weight of apple rootstock were significantly higher in substrate composition S3 compared with S1 composition. However, chlorophyll content (SPAD) and photosynthesis rate were unaffected by variation of substrate composition. Furthermore, rootstock grown in C1 container showed plant height, number of leaves, leaf area, number of nodes, root length, shoot and root’s fresh and dry weight were significantly higher than those grown in C2 and C3 volume containers. The chlorophyll content and transpiration rate were not significantly affected by the different container volumes. These results suggest that the substrate ratio 3:1:2 of PM:VL:PL and container size 1000 mL were more favorable than other treatments for initial growth and development of the tissue culture propagated apple rootstock plants.

scholarly journals Growth Response of Local Cassava to Cutting Models and the Number of Buds

2021 ◽  
Vol 36 (2) ◽  
pp. 379
Author(s):  
Tri Mulya Hartati ◽  
Chumidach Roini ◽  
Indah Rodianawati
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Growth Parameters ◽  
Block Design ◽  
Stem Diameter ◽  
Food Sources ◽  
Local Varieties ◽  
Average Value ◽  
Randomized Block Design ◽  
Number Of Leaves

Cassava is one of the local food sources that are widely available in almost every region. Cuttings are used to plant cassava, and these cuttings will produce a number of roots and buds. The main purpose of this study was to evaluate the effect of cuttings slices model and the number of buds on the growth of Tobelo local varieties of cassava. This study employed a factorial Randomized Block Design (RBD), with the cuttings slices model as the first factor, consisting of three levels, namely: flat slice, one-sided slice and two-sided slice. The second factor is the number of buds, which is divided into three levels, 1 bud, 2 buds and 3 buds. The observation parameters in this study include plant height, number of leaves, stem diameter and leaf area. The results have revealed that the model of two-sided sliced cuttings combined with the number of one bud is the most effective treatment in improving the growth of cassava plants of Tobelo local varieties. The models of one-sided and two-sided oblique cuttings slices yield the highest average value for the parameters of plant height, stem diameter and leaf area, while the treatment with one bud tends to give the best results for the growth parameters.

scholarly journals Application of Taxonomic Classification in Soil Fertility Management Using Maize (Zea mays L.) as Test Crop in Alfisols of Makurdi, Benue State

2020 ◽  
Vol 10 ◽  
pp. 15-22
Author(s):  
Jacob Usman ◽  
S. Idoga ◽  
O.J. Ogbu
Keyword(s):  
Grain Yield ◽  
Leaf Area ◽  
Plant Height ◽  
Growth Parameters ◽  
Application Rate ◽  
Stem Diameter ◽  
Soil Fertility Management ◽  
Area Index ◽  
Significant Difference ◽  
Number Of Leaves

The Alfisols of Makurdi Local Government Area of Benue State was studied with the aim to characterize and classify the soils and determine the optimum fertilizer rate for maize production on the selected soil type of the study area. The soils were formed on Makurdi sand stone, deep (141 cm) and well drained. They were coarse-textured and moderately acidic in reaction (pH 6.6 – 7.0). They had low organic carbon contents ranging from 3.36 to 3.78 % and high base saturation of 58.6 % to 77.4 %. Based on the physical and chemical characteristics, the soils were classified as Eutric Ochrustalfs/Eutric Luvisols. In terms of growth parameters; plant height and number of leaves were not significantly different while leaf area, leaf area index and the stem diameter were significantly different. The highest (130.60 cm, 12.30 and 79.88 mm) plant height, number of leaves and stem diameter were observed at the rate of NPK 150:75:75 kg/ha of fertilizer. In terms of yield parameters, ear weight and grain yield were not statistically significant whereas, ear length and ear diameter were statistically significant. However, NPK 60:30:30 kg/ha showed the highest (178 g) ear weight while application of NPK 150:75:75 kg/ha gave the highest (2.82 kg) grain yield. Since there was no significant difference between the fertilizer rates, it could be concluded that the minimum application rate (NPK 60:30:30 kg/ha) should be used in cultivating maize in Alfisols of Makurdi instead of the highest or the blanket recommendation which involved higher cost.

scholarly journals Discontinuous hydration improves germination and drought tolerance in Annona squamosa seedlings

2021 ◽  
Vol 10 (3) ◽  
pp. e56710313706
Author(s):  
José Laurindo dos Santos Júnior ◽  
Rafael Silva Freitas ◽  
Elizamar Ciríaco da Silva
Keyword(s):  
Drought Tolerance ◽  
Leaf Area ◽  
Plant Height ◽  
Water Deficit ◽  
Growth Parameters ◽  
Stem Diameter ◽  
The Other ◽  
Water Suppression ◽  
Root Shoot Ratio ◽  
Number Of Leaves

The aim of this work was to determine if the discontinuous hydration of A. squamosa seeds benefit its seed germination and if the seedlings from these seeds have a greater tolerance to water deficit through the analysis of growth parameters. The experimental design was a completely randomized, in a 4x3 factorial, with four HD cycles in seeds (zero, one, two and three) and three water treatments (control with daily watering, and cycles of five and ten-intervals days between watering). Plant height, stem diameter, number of leaves, dry biomass, root/shoot ratio, leaf area, specific leaf area, and leaf area ratio were evaluated. Discontinuous hydration treatments benefited germination and promoted a better growth of the seedlings under water deficit cycles. The application of three HD cycles increased plant height, stem diameter, number of leaves, leaf area and dry matter of the seedlings compared to the other cycles. On the other hand, water suppression caused a reduction in the growth of A. squamosa, especially at ten-day intervals between watering. HD cycles in the seeds improved drought tolerance in the seedlings, mainly when three HD cycles are applied to the seeds, suggesting this is a good technique to produce seedlings better tolerant to environments with reduced water availability.

scholarly journals Effects of Rhizome Length and Planting Depth on the Emergence and Growth of Alepidea amatymbica Eckl. & Zeyh

Plants ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 732
Author(s):  
Ramatsobane Maureen Mangoale ◽  
Anthony Jide Afolayan
Keyword(s):  
Weight Gain ◽  
Leaf Area ◽  
Plant Height ◽  
Fragment Length ◽  
Growth Parameters ◽  
Block Design ◽  
Burial Depth ◽  
Planting Depth ◽  
Number Of Leaves ◽  
Length Gain

Alepidea amatymbica is used as a herbal medicine for the treatment of various diseases. As a result of its high medicinal value, this plant is being overexploited by herbal traders with little attention being paid to its conservation, which could lead to its extinction. Cultivation of Alepidea amatymbica was conducted to determine the appropriate planting depth and rhizome fragment length for the growth of this plant. The experiment was laid out in a Complete Randomized Block Design (CRBD) with two factors in a 6 × 3 factorial design. There were six levels of fragment length (1, 2, 3, 4, 5 and 6 cm) and three levels of burial depth (2.5, 5 and 7.5 cm). Emergence rate, number of leaves, leaf area, and plant height, number of florets, rhizome length gain, rhizome weight gain, shoot moisture, and rhizome moisture were measured as growth parameters. The best overall yield in terms of plant height, shoot emergence, rhizome weight gain, number of florets and number of leaves was observed in 7.5 cm planting depth at 6 cm rhizome length. Four- centimetre rhizome length had the highest leaf area of 111.9 ± 3.5 cm2, 101.3 ± 3.5 cm2, 105 ± 3.5 cm2 at 2.5, 5, 7.5 cm planting depth respectively. Shorter fragment lengths showed high potential for vegetative propagation in terms of rhizome length gain at all burial depths. These results suggest that A. amatymbica can regenerate from buried rhizomes and they may contribute to the establishment of a protocol for propagation that could help in conservation of this plant to avoid its extinction

scholarly journals Assessment of Growth Characteristics of Medicinal Plants Ocimum tenuiflorum L. and Plectranthus amboinicus (Lour.) Spreng. Under Shade Net and Open Conditions

2020 ◽  
pp. 1-8
Author(s):  
J. Ambujavalli ◽  
K. Santhiya ◽  
K. Rohini ◽  
V. Kumaresan
Keyword(s):  
Medicinal Plants ◽  
Leaf Area ◽  
Plant Height ◽  
Growth Characteristics ◽  
Similar Type ◽  
Potted Plants ◽  
Ocimum Tenuiflorum ◽  
Number Of Leaves ◽  
Plectranthus Amboinicus ◽  
Microclimate Conditions

Aim: To study the effect of shade net on the growth characteristics of two medicinal plants viz., Tulsi and Indian Borage in terms of plant height, number of leaves, leaf area and flowering in relation to open condition. Place and Duration of Study: Lawspet, Puducherry, India between June 2018 and October 2018. Methodology: Tulsi and Indian Borage plants were grown in similar type of soil. The potted plants were kept in open, 35% and 75% shade net conditions and studied for 3 months. The plant height, number of leaves, and leaf area were measured including number of inflorescence branches for Tulsi. Results: The average air temperature was lower under shade net. Relative humidity was more in shade net conditions with maximum in 75% shade and least in open conditions. The number of leaves of Tulsi and Indian Borage recorded was maximum when grown under 35% shade and least in open conditions. Plant height was maximum in 75% shade for Tulsi and 35% shade in Indian Borage and least in open conditions on both the cases. Leaf area was maximum for both Tulsi and Indian Borage in 75% shade. Conclusion: Growth of the two medicinal plants was influenced by the microclimate conditions. The present study shows that the medicinal plants can be grown in shade net conditions to increase the yield of medicinally useful parts.

Sign in / Sign up

Export Citation Format

Share Document