scholarly journals Three-dimensional Ultrasound in the Fertility Clinic

Author(s):  
Shilpa Deb ◽  
Zeina Haoula ◽  
Nick Raine-Fenning

Abstract The management of subfertility involves a detailed assessment of the couple to identify factors that may affect or predict the outcome of treatment. Three-dimensional imaging is one of the recent advances in the field of ultrasound which has several obvious benefits that relate to an improved spatial orientation and the demonstration of additional image planes such as the coronal plane. Many clinicians remain unconvinced by its reputed advantages and three-dimensional ultrasound is not without disadvantages. These mainly relate to the cost involved and training requirements. Threedimensional ultrasound imaging is still at a relatively early stage in terms of its role as a day-to-day imaging modality in gynecology and reproductive medicine. Other than its application in the assessment and differentiation of uterine anomalies there is little evidence that three-dimensional ultrasound results in clinically-relevant benefit or negates the need for further investigation. Future work should ensure that three-dimensional ultrasound is compared to conventional imaging in randomized trials where the observer is blinded to the outcome such that its role in reproductive medicine can be truly evaluated in an evidence-based manner.

2017 ◽  
Vol 19 (2) ◽  
pp. 216 ◽  
Author(s):  
Paulo Sergio Cossi ◽  
Heron Werner ◽  
Alberto Borges Peixoto ◽  
Wellington P Martins ◽  
Edward Araujo Júnior

Endometrial pathology is frequent in premenopausal women and the diagnostic hysteroscopy is considered the gold standard for assessing endometrial cavity and congenital uterine anomalies. However it is an invasive and uncomfortable procedure. Saline contrast hysterosalgingography and hysterosalpingo-contrast sonography allow detailed assessment of the uterine cavity. We propose a virtual hysteroscopy from three-dimensional saline and three-dimensional hysterosalpingo-contrast sonography scan data to generate a virtual reality as a new noninvasive procedure for assessing the uterine cavity in uterine congenital anomaly and endometrial pathology cases as well.


Author(s):  
Po Mui Lam ◽  
Christopher Haines

Abstract This article reviews the merits of three-dimensional (3D) ultrasound and thereby establishes its clinical and research role in reproductive medicine. Its main clinical applications include the assessment for uterine anomalies and intrauterine pathology, especially, if combined with the procedure of saline infusion into the uterine cavity. Moreover, 3D color Doppler sonography is an exciting research tool for the evaluation of endometrial receptivity, ovarian reserve, and polycystic ovaries.


2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Annarita Perillo ◽  
Valeria Landoni ◽  
Alessia Farneti ◽  
Giuseppe Sanguineti

Abstract Purpose The purpose of this study is to evaluate inter- and intra-fraction organ motion as well as to quantify clinical target volume (CTV) to planning target volume (PTV) margins to be adopted in the stereotactic treatment of early stage glottic cancer. Methods and materials Stereotactic body radiotherapy (SBRT) to 36 Gy in 3 fractions was administered to 23 patients with early glottic cancer T1N0M0. Patients were irradiated with a volumetric intensity modulated arc technique delivered with 6 MV FFF energy. Each patient underwent a pre-treatment cone beam computed tomography (CBCT) to correct the setup based on the thyroid cartilage position. Imaging was repeated if displacement exceeded 2 mm in any direction. CBCT imaging was also performed after each treatment arc as well as at the end of the delivery. Swallowing was allowed only during the beam-off time between arcs. CBCT images were reviewed to evaluate inter- and intra-fraction organ motion. The relationships between selected treatment characteristics, both beam-on and delivery times as well as organ motion were investigated. Results For the population systematic (Ʃ) and random (σ) inter-fraction errors were 0.9, 1.3 and 0.6 mm and 1.1, 1.3 and 0.7 mm in the left-right (X), cranio-caudal (Y) and antero-posterior (Z) directions, respectively. From the analysis of CBCT images acquired after treatment, systematic (Ʃ) and random (σ) intra-fraction errors resulted 0.7, 1.6 and 0.7 mm and 1.0, 1.5 and 0.6 mm in the X, Y and Z directions, respectively. Margins calculated from the intra-fraction errors were 2.4, 5.1 and 2.2 mm in the X, Y and Z directions respectively. A statistically significant difference was found for the displacement in the Z direction between patients irradiated with > 2 arcs versus ≤ 2 arcs, (MW test, p = 0.038). When analyzing mean data from CBCT images for the whole treatment, a significant correlation was found between the time of delivery and the three dimensional displacement vector (r = 0.489, p = 0.055), the displacement in the Y direction (r = 0.553, p = 0.026) and the subsequent margins to be adopted (r = 0.626, p = 0.009). Finally, displacements and the subsequent margins to be adopted in Y direction were significantly greater for treatments with more than 2 arcs (MW test p = 0.037 and p = 0.019, respectively). Conclusions In the setting of controlled swallowing during treatment delivery, intra-fraction motion still needs to be taken into account when planning with estimated CTV to PTV margins of 3, 5 and 3 mm in the X, Y and Z directions, respectively. Selected treatments may require additional margins.


2020 ◽  
Vol 4 (1) ◽  
pp. e000780
Author(s):  
Anna Rosala-Hallas ◽  
Ashley P Jones ◽  
Emma Bedson ◽  
Vanessa Compton ◽  
Ricardo M Fernandes ◽  
...  

BackgroundBronchiolitis is a major cause of admission to hospital in children. Non-invasive ventilation (NIV) support with continuous positive airway pressure (CPAP) or high-flow nasal cannula (HFNC) oxygen is routinely used for infants in the UK with bronchiolitis.ObjectiveTo establish UK paediatric practice regarding management of bronchiolitis, and to explore issues pertinent to the design of a potential future randomised controlled trial of NIV.DesignScreening logs were completed in hospitals in England capturing information on paediatric bronchiolitis admissions. An online national survey of clinical practice was disseminated to healthcare professionals (HCPs) across the UK to ascertain current management strategies.ResultsScreening logs captured data on 393 infants from 8 hospitals. Reasons for admission were most commonly respiratory distress and/or poor fluid intake. Oxygen was administered for 54% of admissions. Respiratory (CPAP and HFNC) and non-respiratory support administered varied considerably. The national survey was completed by 111 HCPs from 76 hospitals. Data were obtained on criteria used to commence and wean NIV, responsibilities for altering NIV settings, minimum training requirements for staff managing a child on NIV, and numbers of trained staff. Most centres were interested in and capable of running a trial of NIV, even out of normal office hours.ConclusionsRespiratory and non-respiratory management of bronchiolitis in UK centres varies widely. A trial of HFNC oxygen therapy in this group of patients is feasible and HCPs would be willing to randomise patients into such a trial. Future work should focus on defining trial eligibility criteria.


2021 ◽  
Vol 7 (21) ◽  
pp. eabg3032
Author(s):  
Jana Petrović ◽  
Alf Göök ◽  
Bo Cederwall

We introduce a neutron-gamma emission tomography (NGET) technique for rapid detection, three-dimensional imaging, and characterization of special nuclear materials like weapons-grade plutonium and uranium. The technique is adapted from fundamental nuclear physics research and represents a previously unexplored approach to the detection and imaging of small quantities of these materials. The method is demonstrated on a radiation portal monitor prototype system based on fast organic scintillators, measuring the characteristic fast time and energy correlations between particles emitted in nuclear fission processes. The use of these correlations in real time in conjunction with modern machine learning techniques provides unprecedented imaging efficiency and high spatial resolution. This imaging modality addresses global security threats from terrorism and the proliferation of nuclear weapons. It also provides enhanced capabilities for addressing different nuclear accident scenarios and for environmental radiological surveying.


2010 ◽  
Vol 36 (S1) ◽  
pp. 210-210
Author(s):  
B. Graupera ◽  
M. Pascual ◽  
B. Úbeda ◽  
L. Hereter ◽  
C. Pedrero ◽  
...  

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Sebastian Draack ◽  
Meinhard Schilling ◽  
Thilo Viereck

Abstract Magnetic particle imaging (MPI) is a young imaging modality for biomedical applications. It uses magnetic nanoparticles as a tracer material to produce three-dimensional images of the spatial tracer distribution in the field-of-view. Since the tracer magnetization dynamics are tied to the hydrodynamic mobility via the Brownian relaxation mechanism, MPI is also capable of mapping the local environment during the imaging process. Since the influence of viscosity or temperature on the harmonic spectrum is very complicated, we used magnetic particle spectroscopy (MPS) as an integral measurement technique to investigate the relationships. We studied MPS spectra as function of both viscosity and temperature on model particle systems. With multispectral MPS, we also developed an empirical tool for treating more complex scenarios via a calibration approach. We demonstrate that MPS/MPI are powerful methods for studying particle-matrix interactions in complex media.


2014 ◽  
Vol 22 (3) ◽  
Author(s):  
Caifang Wang

Abstract.Diffuse optical tomography (DOT) is an optical imaging modality, which provides the spatial distribution of the optical parameters inside a random medium. A propagation back-propagation method named EM-like reconstruction method for stationary DOT problem has been proposed yet. This method is really time consuming. Hence the ordered-subsets (OS) technique for this reconstruction method is studied in this paper. The boundary measurements of DOT are grouped into nonoverlapping and overlapping ordered sequence of subsets with random partition, sequential partition and periodic partition, respectively. The performance of OS methods is compared with the standard EM-like reconstruction method with two-dimensional and three-dimensional numerical experiments. The numerical experiments indicate that reconstruction of nonoverlapping subsets with periodic partition, overlapping subsets with periodic partition and standard EM-like method provide very similar acceptable reconstruction results. However, reconstruction of nonoverlapping subsets with periodic partition spends a minimum of time to get proper results.


Author(s):  
Sam E. Calisch ◽  
Neil A. Gershenfeld

Honeycomb sandwich panels are widely used for high performance parts subject to bending loads, but their manufacturing costs remain high. In particular, for parts with non-flat, non-uniform geometry, honeycombs must be machined or thermoformed with great care and expense. The ability to produce shaped honeycombs would allow sandwich panels to replace monolithic parts in a number of high performance, space-constrained applications, while also providing new areas of research for structural optimization, distributed sensing and actuation, and on-site production of infrastructure. Previous work has shown methods of directly producing shaped honeycombs by cutting and folding flat sheets of material. This research extends these methods by demonstrating work towards a continuous process for the cutting and folding steps of this process. An algorithm for producing a manufacturable cut-and-fold pattern from a three-dimensional volume is designed, and a machine for automatically performing the required cutting and parallel folding is proposed and prototyped. The accuracy of the creases placed by this machine is characterized and the impact of creasing order is demonstrated. Finally, a prototype part is produced and future work is sketched towards full process automation.


Sign in / Sign up

Export Citation Format

Share Document