scholarly journals Study on Modeling the Spectral Solar Radiation Absorption Characteristics in Determining the surface Temperature of a Ground Object

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Teresa Palomar ◽  
Miguel Silva ◽  
Marcia Vilarigues ◽  
Isabel Pombo Cardoso ◽  
David Giovannacci

Abstract This work presents the results of the evaluation of two Art Nouveau glass windows from the Casa-Museu Dr. Anastácio Gonçalves (Lisbon, Portugal) with IR-thermography during the summer solstice. According to the measurements, the surface temperature of glass depended on the outdoor environmental temperature and, mainly, on the direct solar radiation. Colored glasses presented a higher surface temperature due to the absorption of their chromophores at near-IR wavelengths. Enamels and grisailles showed higher surface temperatures than their support glasses due to both their chemical composition and color. The protective glazing, with small slits in one of the window panels, induced a hot-air pocket in its upper part due to the insufficient ventilation.


Land ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 483
Author(s):  
Nikola Žižlavská ◽  
Tomáš Mikita ◽  
Zdeněk Patočka

The article is on the effects of woody vegetation growing on the roadside on the temperature of the surface of cycle paths. The main hypothesis of the study is that vegetation has the effect of lowering the temperature of the surroundings in its shadow and thus improves the comfort of users of cycle paths in the summer months. The second hypothesis is to find out which type of road surface is most suitable for the thermal well-being of users. This goal was achieved by measuring the temperature of selected locations on cycle paths with different types of construction surfaces with nearby woody vegetation using a contactless thermometer over several days at regular intervals. The positions of the selected locations were measured using GNSS and the whole locality of interest was photographed using an unmanned aerial vehicle (UAV), or drone, and subsequently a digital surface model (DSM) of the area was created using a Structure from Motion (SfM) algorithm. This model served for the calculation of incident solar radiation during the selected days using the Solar Area Graphics tool with ArcGIS software. Subsequently, the effect of the shade of the surrounding vegetation on the temperature during the day was analysed and statistically evaluated. The results are presented in many graphs and their interpretation used to evaluate the effects of nearby woody vegetation and the type of road surface on the surrounding air temperature and the comfort of users of these routes. The results demonstrate the benefits of using UAVs for the purpose of modelling the course of solar radiation during the day, showing the effect of roadside vegetation on reducing the surface temperature of the earth’s surface and thus confirming the need for planting and maintaining such vegetation.


2019 ◽  
Vol 1 ◽  
pp. 1-2
Author(s):  
Vladimír Sedlák ◽  
Katarína Onačillová ◽  
Michal Gallay ◽  
Jaroslav Hofierka ◽  
Ján Kaňuk ◽  
...  

<p><strong>Abstract.</strong> Current climate changes on a global scale require an optimal estimate of heat transfer in a complex urban environment as a part of the requirements for optimal urban planning in the conditions of a smart city. Urban greenery has a considerable impact on the cooling of the urban environment during thermal waves. Sentinel-2 as an Earth observation mission developed by the European Space Agency as part of the Copernicus Programme to perform terrestrial observations in support of various services could become a potential means also for quantified assessment of different urban scenarios where vegetation plays an essential role. The Sentinel-2 data provide higher spatial and temporal resolution than other similar missions allow.</p><p>The presented research study is aimed at exploiting the potential of Sentinel-2 in simulating the cooling effect of urban greenery as part of smart city mapping in assessing the quality of life of its inhabitants. The main objective of the research study is to define a methodical approach for spatial surface temperature modelling in selected urban areas based on the solar radiation modelling and parameterization of the land cover properties from the Sentinel-2 data. While solar irradiation can be accurately calculated at a fine scale using virtual 3D city models, it is difficult to find other important parameters for ground surface modelling such as surface thermal emissivity, broadband albedo and evapotranspiration. The research study was tested and verified in 4&amp;thinsp;sq.&amp;thinsp;km urban area in the selected central parts of the city of Košice in Slovakia (Figure 1). For a detailed survey, four sites (site 1 &amp;ndash; Moyzesova Street, site 2 &amp;ndash; Historical centre, site 3 &amp;ndash; City park, site 4 &amp;ndash; Hvozdíkov park) were chosen in the central city area. The virtual 3D urban model was created from the airborne LiDAR (Light Detection And Ranging, hereinafter referred to as the lidar) and photogrammetric data obtained in a single mission.</p><p>The aim of the research study was to assess the feasibility of using virtual 3D city models and multispectral satellite images to approximate surface temperature dynamics by modelling of the spatial distribution of solar radiation and land surface characteristics in a complex urban environment. A time-series of the Sentinel-2 data was collected for comparison with the reference time series of the terrestrial lidar (TLS &amp;ndash; Terrestrial Laser Scanning) data on urban greenery on four selected urban areas of the city of Košice. Between the vegetation metrics, the statistical linear relationship derived from the Sentinel-2 and TLS data was defined. Based on terrain mapping, a geobotanic database of urban trees was created. The algorithmic structure of a toolbox for the land surface temperature modelling in the open-source GRASS GIS was developed based on the Stefan-Boltzmann law and Kirchhoff rule.</p><p>This research study has highlighted how the Sentinel-2 data can be used to estimate of the broad-band albedo, surface emission, and solar transmittance to the vegetation of urban greenery. The main benefit of the research study is the developed algorithm for estimation of the land surface temperature in a GIS environment that provides a unique platform for integrating different types of data-sets to become usable in urban planning and for exploitation of the Sentinel-2 data in mitigation of a negative impact of the urban extreme heat islands on the quality of life of inhabitants. The resulting LST (Land Surface Temperature) was calculated for four scenarios using the detail of the study area of the site 1 (Figure 2) and whole study are (Figure 3) demonstrate. These figures also show the cooling effect of urban trees and shrubs.</p>


2007 ◽  
Vol 152 (2) ◽  
pp. 351-361 ◽  
Author(s):  
Stefano Goffredo ◽  
Erik Caroselli ◽  
Elettra Pignotti ◽  
Guido Mattioli ◽  
Francesco Zaccanti

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2758 ◽  
Author(s):  
Joseph Gonzales ◽  
Daiki Kurihara ◽  
Tetsuro Maeda ◽  
Masafumi Yamazaki ◽  
Takahito Saruhashi ◽  
...  

Ice accretion is detrimental to numerous industries, including infrastructure, power generation, and aviation applications. Currently, some of the leading de-icing technologies utilize a heating source coupled with a superhydrophobic surface. This superhydrophobic surface reduces the power consumption by the heating element. Further power consumption reduction in these systems can be achieved through an increase in passive heat generation through absorption of solar radiation. In this work, a superhydrophobic surface with increased solar radiation absorption is proposed and characterized. An existing icephobic surface based on a polytetrafluoroethylene (PTFE) microstructure was modified through the addition of graphite microparticles. The proposed surface maintains hydrophobic performance nearly identical to the original superhydrophobic coating as demonstrated by contact and roll-off angles within 2.5% of the original. The proposed graphite coating also has an absorptivity coefficient under exposure to solar radiation 35% greater than typical PTFE-based coatings. The proposed coating was subsequently tested in an icing wind tunnel, and showed an 8.5% and 50% decrease in melting time for rime and glaze ice conditions, respectively.


Author(s):  
Mohamed R. Eid ◽  
O.D. Makinde

Abstract The combined impact of solar radiation, chemical reaction, Joule heating, viscous dissipation and magnetic field on flow of an electrically conducting nanofluid over a convectively heated stretching sheet embedded in a saturated porous medium is simulated. By using appropriate similarity transformation, the governing nonlinear equations are converted into ODEs and numerical shooting technique with (RK45) method is employed to tackle the problem. The effects of various thermo-physical parameters on the entire flow structure with heat and mass transfer are presented graphically and discussed quantitatively. Special cases of our results are benchmarked with some of those obtained earlier in the literature and are found to be in excellent agreement. It is found that both the temperature and surface concentration gradients are increasing functions of the non-Darcy porous medium parameter. One describing result is the incident solar radiation absorption and its transmission into the working nanofluid by convection.


Sign in / Sign up

Export Citation Format

Share Document