scholarly journals The impact of embedded valleys on daytime pollution transport over a mountain range

2015 ◽  
Vol 15 (10) ◽  
pp. 14315-14356 ◽  
Author(s):  
M. N. Lang ◽  
A. Gohm ◽  
J. S. Wagner
Keyword(s):  
Boundary Layer ◽  
Complex Terrain ◽  
Mountain Range ◽  
Topographic Effects ◽  
Pollution Transport ◽  
Vertical Exchange ◽  
Boundary Layer Height ◽  
Thermally Driven ◽  
Definition Of ◽  
The Impact

Abstract. Idealized large-eddy simulations were performed to investigate the impact of different mountain geometries on daytime pollution transport by thermally driven winds. The main objective was to determine interactions between plain-to-mountain and slope wind systems, and their influence on the pollution distribution over complex terrain. For this purpose, tracer analyses were conducted over a quasi-two-dimensional mountain range with embedded valleys and a flat foreland in cross-mountain direction. The valley depth was varied systematically. It was found that different flow regimes develop dependent on the valley floor height. In the case of elevated valley floors, the plain-to-mountain wind descends into the potentially warmer valley and replaces the opposing upslope wind. This superimposed plain-to-mountain wind increases the pollution transport towards the main ridge by additional 20% compared to the regime with a deep valley. Due to mountain and advective venting, the vertical exchange is 3.6 times higher over complex terrain than over a flat plain. However, the calculated vertical exchange is strongly sensitive to the definition of the atmospheric boundary layer height. In summary, the impact of the terrain geometry on the mechanisms of pollution transport confirms the necessity to account for topographic effects in future boundary layer parameterization schemes.

scholarly journals The impact of embedded valleys on daytime pollution transport over a mountain range

2015 ◽  
Vol 15 (20) ◽  
pp. 11981-11998 ◽  
Author(s):  
M. N. Lang ◽  
A. Gohm ◽  
J. S. Wagner
Keyword(s):  
Boundary Layer ◽  
Complex Terrain ◽  
Mountain Range ◽  
Topographic Effects ◽  
Pollution Transport ◽  
Convective Boundary ◽  
Vertical Exchange ◽  
Boundary Layer Height ◽  
Thermally Driven ◽  
The Impact

Abstract. Idealized large-eddy simulations were performed to investigate the impact of different mountain geometries on daytime pollution transport by thermally driven winds. The main objective was to determine interactions between plain-to-mountain and slope wind systems, and their influence on the pollution distribution over complex terrain. For this purpose, tracer analyses were conducted over a quasi-two-dimensional mountain range with embedded valleys bordered by ridges with different crest heights and a flat foreland in cross-mountain direction. The valley depth was varied systematically. It was found that different flow regimes develop dependent on the valley floor height. In the case of elevated valley floors, the plain-to-mountain wind descends into the potentially warmer valley and replaces the opposing upslope wind. This superimposed plain-to-mountain wind increases the pollution transport towards the main ridge by an additional 20 % compared to the regime with a deep valley. Due to mountain and advective venting, the vertical exchange is 3.6 times higher over complex terrain than over a flat plain. However, the calculated vertical exchange is strongly sensitive to the definition of the convective boundary layer height. In summary, the impact of the terrain geometry on the mechanisms of pollution transport confirms the necessity to account for topographic effects in future boundary layer parameterization schemes.

scholarly journals The impact of a foehn wind on PM10 concentrations and the urban boundary layer in complex terrain: a case study from Kraków, Poland

Tellus B ◽  
2021 ◽  
Vol 73 (1) ◽  
pp. 1-26
Author(s):  
Piotr Sekuła ◽  
Anita Bokwa ◽  
Zbigniew Ustrnul ◽  
Mirosław Zimnoch ◽  
Bogdan Bochenek
Keyword(s):  
Boundary Layer ◽  
Complex Terrain ◽  
Urban Boundary Layer ◽  
The Impact

scholarly journals Technical note: Boundary layer height determination from Lidar for improving air pollution episode modelling: development of new algorithm and evaluation

2017 ◽  
Author(s):  
Ting Yang ◽  
Zifa Wang ◽  
Wei Zhang ◽  
Alex Gbaguidi ◽  
Nubuo Sugimoto ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Air Pollution ◽  
High Performance ◽  
Accurate Determination ◽  
Technical Note ◽  
Strong Increase ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Retrieval Algorithms ◽  
The Impact

Abstract. Predicting air pollution events in low atmosphere over megacities requires thorough understanding of the tropospheric dynamic and chemical processes, involving notably, continuous and accurate determination of the boundary layer height (BLH). Through intensive observations experimented over Beijing (China), and an exhaustive evaluation existing algorithms applied to the BLH determination, persistent critical limitations are noticed, in particular over polluted episodes. Basically, under weak thermal convection with high aerosol loading, none of the retrieval algorithms is able to fully capture the diurnal cycle of the BLH due to pollutant insufficient vertical mixing in the boundary layer associated with the impact of gravity waves on the tropospheric structure. Subsequently, a new approach based on gravity wave theory (the cubic root gradient method: CRGM), is developed to overcome such weakness and accurately reproduce the fluctuations of the BLH under various atmospheric pollution conditions. Comprehensive evaluation of CRGM highlights its high performance in determining BLH from Lidar. In comparison with the existing retrieval algorithms, the CRGM potentially reduces related computational uncertainties and errors from BLH determination (strong increase of correlation coefficient from 0.44 to 0.91 and significant decrease of the root mean square error from 643 m to 142 m). Such newly developed technique is undoubtedly expected to contribute to improve the accuracy of air quality modelling and forecasting systems.

scholarly journals Nature of the Mesoscale Boundary Layer Height and Water Vapor Variability Observed 14 June 2002 during the IHOP_2002 Campaign

2009 ◽  
Vol 137 (1) ◽  
pp. 414-432 ◽  
Author(s):  
F. Couvreux ◽  
F. Guichard ◽  
P. H. Austin ◽  
F. Chen
Keyword(s):  
Boundary Layer ◽  
Water Vapor ◽  
Mesoscale Model ◽  
Surface Flux ◽  
Early Morning ◽  
Surface Fluxes ◽  
Layer Height ◽  
Horizontal Advection ◽  
Boundary Layer Height ◽  
The Impact

Abstract Mesoscale water vapor heterogeneities in the boundary layer are studied within the context of the International H2O Project (IHOP_2002). A significant portion of the water vapor variability in the IHOP_2002 occurs at the mesoscale, with the spatial pattern and the magnitude of the variability changing from day to day. On 14 June 2002, an atypical mesoscale gradient is observed, which is the reverse of the climatological gradient over this area. The factors causing this water vapor variability are investigated using complementary platforms (e.g., aircraft, satellite, and in situ) and models. The impact of surface flux heterogeneities and atmospheric variability are evaluated separately using a 1D boundary layer model, which uses surface fluxes from the High-Resolution Land Data Assimilation System (HRLDAS) and early-morning atmospheric temperature and moisture profiles from a mesoscale model. This methodology, based on the use of robust modeling components, allows the authors to tackle the question of the nature of the observed mesoscale variability. The impact of horizontal advection is inferred from a careful analysis of available observations. By isolating the individual contributions to mesoscale water vapor variability, it is shown that the observed moisture variability cannot be explained by a single process, but rather involves a combination of different factors: the boundary layer height, which is strongly controlled by the surface buoyancy flux, the surface latent heat flux, the early-morning heterogeneity of the atmosphere, horizontal advection, and the radiative impact of clouds.

scholarly journals Airborne observation of mixing across the entrainment zone during PARADE 2011

2015 ◽  
Vol 15 (20) ◽  
pp. 29171-29212 ◽  
Author(s):  
F. Berkes ◽  
P. Hoor ◽  
H. Bozem ◽  
D. Kunkel ◽  
M. Sprenger ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Dynamic Properties ◽  
Inversion Layer ◽  
Lower Troposphere ◽  
Correlation Method ◽  
Late Summer ◽  
Lower Atmosphere ◽  
Boundary Layer Height ◽  
Entrainment Zone ◽  
The Impact

Abstract. This study presents the analysis of the structure and air mass characteristics of the lower atmosphere during the field campaign PARADE (PArticles and RAdicals: Diel observations of the impact of urban and biogenic Emissions) on Mount Kleiner Feldberg in southwestern Germany during late summer 2011. We analysed measurements of meteorological variables (temperature, moisture, pressure, wind speed and direction) from radio soundings and of chemical tracers (carbon dioxide, ozone) from aircraft measurements. We focus on the thermodynamic and dynamic properties, that control the chemical distribution of atmospheric constituents in the boundary layer. We show that the evolution of tracer profiles of CO2 and O3 indicate mixing across the inversion layer (or entrainment zone). This finding is supported by the analysis of tracer–tracer correlations which are indicative for mixing and the relation of tracer profiles in relation to the evolution of the boundary layer height deduced from radio soundings. The study shows the relevance of entrainment processes for the lower troposphere in general and specifically that the tracer–tracer correlation method can be used to identify mixing and irreversible exchange processes across the inversion layer.

scholarly journals The Impact of Mount Washington on the Height of the Boundary Layer and the Vertical Structure of Temperature and Moisture

Atmosphere ◽  
2018 ◽  
Vol 9 (8) ◽  
pp. 293 ◽  
Author(s):  
Eric Kelsey ◽  
Adriana Bailey ◽  
Georgia Murray
Keyword(s):  
Boundary Layer ◽  
Air Quality ◽  
Complex Terrain ◽  
Free Atmosphere ◽  
Air Mass ◽  
Meteorological Observations ◽  
Measurement Strategies ◽  
The Impact ◽  
Mass Type ◽  
Mount Washington

Discrimination of the type of air mass along mountain slopes can be a challenge and is not commonly performed, but is critical for identifying factors responsible for influencing montane weather, climate, and air quality. A field campaign to measure air mass type and transitions on the summit of Mount Washington, New Hampshire, USA was performed on 19 August 2016. Meteorological observations were taken at the summit and at several sites along the east and west slopes. Ozone concentrations were measured at the summit and on the valley floor. Additionally, water vapor stable isotopes were measured from a truck that drove up and down the Mount Washington Auto Road concurrent with radiosonde launches that profiled the free atmosphere. This multivariate perspective revealed thermal, moisture, and air mass height differences among the free atmosphere, leeward, and windward mountain slopes. Both thermally and mechanically forced upslope flows helped shape these differences by altering the height of the boundary layer with respect to the mountain surface. Recommendations for measurement strategies hoping to develop accurate observational climatologies of air mass exposure in complex terrain are discussed and will be important for evaluating elevation-dependent warming and improving forecasting for weather and air quality.

Sign in / Sign up

Export Citation Format

Share Document