scholarly journals Combined neural network/Phillips–Tikhonov approach to aerosol retrievals over land from the NASA Research Scanning Polarimeter

2017 ◽  
Vol 10 (11) ◽  
pp. 4235-4252 ◽  
Author(s):  
Antonio Di Noia ◽  
Otto P. Hasekamp ◽  
Lianghai Wu ◽  
Bastiaan van Diedenhoven ◽  
Brian Cairns ◽  
...  

Abstract. In this paper, an algorithm for the retrieval of aerosol and land surface properties from airborne spectropolarimetric measurements – combining neural networks and an iterative scheme based on Phillips–Tikhonov regularization – is described. The algorithm – which is an extension of a scheme previously designed for ground-based retrievals – is applied to measurements from the Research Scanning Polarimeter (RSP) on board the NASA ER-2 aircraft. A neural network, trained on a large data set of synthetic measurements, is applied to perform aerosol retrievals from real RSP data, and the neural network retrievals are subsequently used as a first guess for the Phillips–Tikhonov retrieval. The resulting algorithm appears capable of accurately retrieving aerosol optical thickness, fine-mode effective radius and aerosol layer height from RSP data. Among the advantages of using a neural network as initial guess for an iterative algorithm are a decrease in processing time and an increase in the number of converging retrievals.

2017 ◽  
Author(s):  
Antonio Di Noia ◽  
Otto P. Hasekamp ◽  
Lianghai Wu ◽  
Bastiaan van Diedenhoven ◽  
Brian Cairns ◽  
...  

Abstract. In this paper, an algorithm for the retrieval of aerosol and land surface properties from airborne spectropolarimetric measurements – combining neural networks and an iterative scheme based on Phillips-Tikhonov regularization – is described. The algorithm – which is an extension of a scheme previously designed for ground-based retrievals – is applied to measurements from the Research Scanning Polarimeter (RSP) onboard the NASA ER-2 aircraft. A neural network, trained on a large dataset of synthetic measurements, is applied to perform aerosol retrievals from real RSP data, and the neural network retrievals are subsequently used as first guess for the Phillips-Tikhonov retrieval. The resulting algorithm appears capable of accurately retrieving aerosol optical thickness, fine mode effective radius and aerosol layer height from RSP data. Among the advantages of using a neural network as initial guess for an iterative algorithm are a decrease in processing time and an increase in the number of converging retrievals.


2017 ◽  
Vol 28 (3-4) ◽  
pp. 55-71
Author(s):  
V. R. Cherlіnka

The maіn objectіve was to study the іnfluence of the traіnіng dataset on the qualіtatіve characterіstіcs of sіmulatіve soіl maps, whіch are obtaіned through sіmulatіon usіng a typіcal set of materіals that can be potentіally avaіlable for the soіl scіentіst іn modern Ukraіnіan realіtіes. Achіevement of thіs goal was achіeved by solvіng a number of the followіng tasks: a) dіgіtіzіng of cartographіc materіals; b) creatіng DEM wіth a resolutіon equal to 10 m; c) analysіs of dіgіtal elevatіon models and extractіon of land surface parameters; d) generatіon of traіnіng datasets accordіng to the descrіbed methodologіcal approaches; e) creatіon sіmulatіon models of soіl-cover іn R-statіstіc; g) analysіs of the obtaіned results and conclusіons regardіng the optіmal sіze of the traіnіng datasets for predіctіve modelіng of the soіl cover and іts duratіon. As an object was selected a fragment of the terrіtory of Ukraіne (4200×4200 m) wіthіn the lіmіts of Glybotsky dіstrіct of the Chernіvtsі regіon, confіned to the Prut-Sіret іnterfluve (North Bukovyna) wіth contrast geomorphologіcal condіtіons. Thіs area has dіfferent admіnіstratіve subordіnatіon and economіc use but іs covered wіth soіl cartographіc materіals only by 49.43 %. For data processіng were used іnstrumental possіbіlіtіes of free software: geo- rectіfіcatіons of maps materіal – GІS Quantum, dіgіtalіzatіon – Easy Trace, preparatіon of maps morphometrіc parameters – GRASS GІS and buіldіng sіmulatіve soіl maps – R, a language and envіronment for statіstіcal computіng. To create sіmulatіon models of soіl cover, a R-statіstіc scrіpt was wrіtten that іncludes a number of adaptatіons for solvіng set tasks and іmplements the dіfferent types of predіcatіve algorіthms such as: Multіnomіal Logіstіc Regressіon, Decіsіon Trees, Neural Networks, Random Forests, K-Nearest Neіghbors, Support Vector Machіnes and Bagged Trees. To assess the qualіty of the obtaіned models, the Cohen’s Kappa Іndex (?) was used whіch best represents the degree of complіance between the orіgіnal and the sіmulated data. As a benchmark, the usual medіal axes traіnіng dataset of was used. Other study optіons were: medіan-weіghted and randomіzed-weіghted samplіng. Thіs together wіth 7 predіcatіve algorіthms allowed to get 72 soіl sіmulatіons, the analysіs of whіch revealed quіte іnterestіng patterns. Models rankіng by іncreasіng the qualіty of the predіctіon by the kappa of the maіn data set shown, that the MLR algorіthm showed the worst results among others. Next іn ascendіng order are Neural Network, SVM, KNN, BGT, RF, DT. The last three algorіthms refer to the classіfіcatіon and theіr hіgh results іndіcate the greatest suіtabіlіty of such approaches іn sіmulatіon of soіl cover. The sample based on the weіghted medіan dіd not show strong advantages over others, as the results are quіte controversіal. Only іn the case of the neural network and the Bugget Trees the results of the medіan-weіghted sample predіctіon showed a better result vs a sіmple medіan sample and much worse than any varіants of randomіzed traіnіng data. Other algorіthms requіred a dіfferent number of randomіzed poіnts to cross the 90 % kappa: KNN – 25 %; BGT, RF and DT – 90 %. To achіeve 95 % kappa BGT algorіthm requіres 30% traіnіng poіnts of the total, RF – 25 % and DT – 20 %. Decіsіon Trees as a result turned out to be the most powerful algorіthm, whіch was able to sіmulate the dіstrіbutіon of soіl abnormalіtіes from kappa 97.13 % wіth 35 % saturatіon of the traіnіng sample wіth the orіgіnal data. Overall, DT shows a great dіfference between the approaches to selectіng traіnіng data: any medіan falls by 13 % іn front of a sіmple 5 % randomіzed-weіghted set of traіnіng cells and 22 % – about 35 % of the set.


2019 ◽  
Vol 1 (3) ◽  
pp. 42-48
Author(s):  
Mohammed Z. Al-Faiz ◽  
Ali A. Ibrahim ◽  
Sarmad M. Hadi

The speed of learning in neural network environment is considered as the most effective parameter spatially in large data sets. This paper tries to minimize the time required for the neural network to fully understand and learn about the data by standardize input data. The paper showed that the Z-Score standardization of input data significantly decreased the number of epoochs required for the network to learn. This paper also proved that the binary dataset is a serious limitation for the convergence of neural network, so the standardization is a must in such case where the 0’s inputs simply neglect the connections in the neural network. The data set used in this paper are features extracted from gel electrophoresis images and that open the door for using artificial intelligence in such areas.


Author(s):  
Komsan Wongkalasin ◽  
Teerapon Upachaban ◽  
Wacharawish Daosawang ◽  
Nattadon Pannucharoenwong ◽  
Phadungsak Ratanadecho

This research aims to enhance the watermelon’s quality selection process, which was traditionally conducted by knocking the watermelon fruit and sort out by the sound’s character. The proposed method in this research is generating the sound spectrum through the watermelon and then analyzes the response signal’s frequency and the amplitude by Fast Fourier Transform (FFT). Then the obtained data were used to train and verify the neural network processor. The result shows that, the frequencies of 129 and 172 Hz were suit to be used in the comparison. Thirty watermelons, which were randomly selected from the orchard, were used to create a data set, and then were cut to manually check and match to the fruits’ quality. The 129 Hz frequency gave the response ranging from 13.57 and above in 3 groups of watermelons quality, including, not fully ripened, fully ripened, and close to rotten watermelons. When the 172 Hz gave the response between 11.11–12.72 in not fully ripened watermelons and those of 13.00 or more in the group of close to rotten and hollow watermelons. The response was then used as a training condition for the artificial neural network processor of the sorting machine prototype. The verification results provided a reasonable prediction of the ripeness level of watermelon and can be used as a pilot prototype to improve the efficiency of the tools to obtain a modern-watermelon quality selection tool, which could enhance the competitiveness of the local farmers on the product quality control.


2005 ◽  
Vol 488-489 ◽  
pp. 793-796 ◽  
Author(s):  
Hai Ding Liu ◽  
Ai Tao Tang ◽  
Fu Sheng Pan ◽  
Ru Lin Zuo ◽  
Ling Yun Wang

A model was developed for the analysis and prediction of correlation between composition and mechanical properties of Mg-Al-Zn (AZ) magnesium alloys by applying artificial neural network (ANN). The input parameters of the neural network (NN) are alloy composition. The outputs of the NN model are important mechanical properties, including ultimate tensile strength, tensile yield strength and elongation. The model is based on multilayer feedforward neural network. The NN was trained with comprehensive data set collected from domestic and foreign literature. A very good performance of the neural network was achieved. The model can be used for the simulation and prediction of mechanical properties of AZ system magnesium alloys as functions of composition.


2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Jeffrey Micher

We present a method for building a morphological generator from the output of an existing analyzer for Inuktitut, in the absence of a two-way finite state transducer which would normally provide this functionality. We make use of a sequence to sequence neural network which “translates” underlying Inuktitut morpheme sequences into surface character sequences. The neural network uses only the previous and the following morphemes as context. We report a morpheme accuracy of approximately 86%. We are able to increase this accuracy slightly by passing deep morphemes directly to output for unknown morphemes. We do not see significant improvement when increasing training data set size, and postulate possible causes for this.


2019 ◽  
Vol 2019 (02) ◽  
pp. 89-98
Author(s):  
Vijayakumar T

Predicting the category of tumors and the types of the cancer in its early stage remains as a very essential process to identify depth of the disease and treatment available for it. The neural network that functions similar to the human nervous system is widely utilized in the tumor investigation and the cancer prediction. The paper presents the analysis of the performance of the neural networks such as the, FNN (Feed Forward Neural Networks), RNN (Recurrent Neural Networks) and the CNN (Convolutional Neural Network) investigating the tumors and predicting the cancer. The results obtained by evaluating the neural networks on the breast cancer Wisconsin original data set shows that the CNN provides 43 % better prediction than the FNN and 25% better prediction than the RNN.


2021 ◽  
Vol 14 (6) ◽  
pp. 3421-3435
Author(s):  
Zhenjiao Jiang ◽  
Dirk Mallants ◽  
Lei Gao ◽  
Tim Munday ◽  
Gregoire Mariethoz ◽  
...  

Abstract. This study introduces an efficient deep-learning model based on convolutional neural networks with joint autoencoder and adversarial structures for 3D subsurface mapping from 2D surface observations. The method was applied to delineate paleovalleys in an Australian desert landscape. The neural network was trained on a 6400 km2 domain by using a land surface topography as 2D input and an airborne electromagnetic (AEM)-derived probability map of paleovalley presence as 3D output. The trained neural network has a squared error <0.10 across 99 % of the training domain and produces a squared error <0.10 across 93 % of the validation domain, demonstrating that it is reliable in reconstructing 3D paleovalley patterns beyond the training area. Due to its generic structure, the neural network structure designed in this study and the training algorithm have broad application potential to construct 3D geological features (e.g., ore bodies, aquifer) from 2D land surface observations.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Oluwafemi Ajayi ◽  
Reolyn Heymann

Purpose Energy management is critical to data centres (DCs) majorly because they are high energy-consuming facilities and demand for their services continue to rise due to rapidly increasing global demand for cloud services and other technological services. This projected sectoral growth is expected to translate into increased energy demand from the sector, which is already considered a major energy consumer unless innovative steps are used to drive effective energy management systems. The purpose of this study is to provide insights into the expected energy demand of the DC and the impact each measured parameter has on the building's energy demand profile. This serves as a basis for the design of an effective energy management system. Design/methodology/approach This study proposes novel tunicate swarm algorithm (TSA) for training an artificial neural network model used for predicting the energy demand of a DC. The objective is to find the optimal weights and biases of the model while avoiding commonly faced challenges when using the backpropagation algorithm. The model implementation is based on historical energy consumption data of an anonymous DC operator in Cape Town, South Africa. The data set provided consists of variables such as ambient temperature, ambient relative humidity, chiller output temperature and computer room air conditioning air supply temperature, which serve as inputs to the neural network that is designed to predict the DC’s hourly energy consumption for July 2020. Upon preprocessing of the data set, total sample number for each represented variable was 464. The 80:20 splitting ratio was used to divide the data set into training and testing set respectively, making 452 samples for the training set and 112 samples for the testing set. A weights-based approach has also been used to analyze the relative impact of the model’s input parameters on the DC’s energy demand pattern. Findings The performance of the proposed model has been compared with those of neural network models trained using state of the art algorithms such as moth flame optimization, whale optimization algorithm and ant lion optimizer. From analysis, it was found that the proposed TSA outperformed the other methods in training the model based on their mean squared error, root mean squared error, mean absolute error, mean absolute percentage error and prediction accuracy. Analyzing the relative percentage contribution of the model's input parameters based on the weights of the neural network also shows that the ambient temperature of the DC has the highest impact on the building’s energy demand pattern. Research limitations/implications The proposed novel model can be applied to solving other complex engineering problems such as regression and classification. The methodology for optimizing the multi-layered perceptron neural network can also be further applied to other forms of neural networks for improved performance. Practical implications Based on the forecasted energy demand of the DC and an understanding of how the input parameters impact the building's energy demand pattern, neural networks can be deployed to optimize the cooling systems of the DC for reduced energy cost. Originality/value The use of TSA for optimizing the weights and biases of a neural network is a novel study. The application context of this study which is DCs is quite untapped in the literature, leaving many gaps for further research. The proposed prediction model can be further applied to other regression tasks and classification tasks. Another contribution of this study is the analysis of the neural network's input parameters, which provides insight into the level to which each parameter influences the DC’s energy demand profile.


Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. WA41-WA52 ◽  
Author(s):  
Dario Grana ◽  
Leonardo Azevedo ◽  
Mingliang Liu

Among the large variety of mathematical and computational methods for estimating reservoir properties such as facies and petrophysical variables from geophysical data, deep machine-learning algorithms have gained significant popularity for their ability to obtain accurate solutions for geophysical inverse problems in which the physical models are partially unknown. Solutions of classification and inversion problems are generally not unique, and uncertainty quantification studies are required to quantify the uncertainty in the model predictions and determine the precision of the results. Probabilistic methods, such as Monte Carlo approaches, provide a reliable approach for capturing the variability of the set of possible models that match the measured data. Here, we focused on the classification of facies from seismic data and benchmarked the performance of three different algorithms: recurrent neural network, Monte Carlo acceptance/rejection sampling, and Markov chain Monte Carlo. We tested and validated these approaches at the well locations by comparing classification predictions to the reference facies profile. The accuracy of the classification results is defined as the mismatch between the predictions and the log facies profile. Our study found that when the training data set of the neural network is large enough and the prior information about the transition probabilities of the facies in the Monte Carlo approach is not informative, machine-learning methods lead to more accurate solutions; however, the uncertainty of the solution might be underestimated. When some prior knowledge of the facies model is available, for example, from nearby wells, Monte Carlo methods provide solutions with similar accuracy to the neural network and allow a more robust quantification of the uncertainty, of the solution.


Sign in / Sign up

Export Citation Format

Share Document