scholarly journals Tracking aerosols and SO<sub>2</sub> clouds from the Raikoke eruption: 3D view from satellite observations

2021 ◽  
Vol 14 (12) ◽  
pp. 7545-7563
Author(s):  
Nick Gorkavyi ◽  
Nickolay Krotkov ◽  
Can Li ◽  
Leslie Lait ◽  
Peter Colarco ◽  
...  

Abstract. The 21 June 2019 eruption of the Raikoke volcano (Kuril Islands, Russia; 48∘ N, 153∘ E) produced significant amounts of volcanic aerosols (sulfate and ash) and sulfur dioxide (SO2) gas that penetrated into the lower stratosphere. The dispersed SO2 and sulfate aerosols in the stratosphere were still detectable by multiple satellite sensors for many months after the eruption. For this study of SO2 and aerosol clouds we use data obtained from two of the Ozone Mapping and Profiler Suite sensors on the Suomi National Polar-orbiting Partnership satellite: total column SO2 from the Nadir Mapper and aerosol extinction profiles from the Limb Profiler as well as other satellite data sets. We evaluated the limb viewing geometry effect (the “arch effect”) in the retrieval of the LP standard aerosol extinction product at 674 nm. It was shown that the amount of SO2 decreases with a characteristic period of 8–18 d and the peak of stratospheric aerosol optical depth recorded at a wavelength of 674 nm lags the initial peak of SO2 mass by 1.5 months. Using satellite observations and a trajectory model, we examined the dynamics of an unusual atmospheric feature that was observed, a stratospheric coherent circular cloud of SO2 and aerosol from 18 July to 22 September 2019.

2021 ◽  
Author(s):  
Nick Gorkavyi ◽  
Nickolay Krotkov ◽  
Can Li ◽  
Leslie Lait ◽  
Peter Colarco ◽  
...  

Abstract. The June 21, 2019 eruption of the Raikoke volcano (Kuril Islands, Russia, 48°N, 153°E) produced significant amounts of volcanic aerosols (sulfate and ash) and sulfur dioxide (SO2) gas that penetrated into the lower stratosphere. The dispersed SO2 and sulfate aerosols in the stratosphere were still detectable by multiple satellite sensors for three months after the eruption. For this study of SO2 and aerosol clouds we use data obtained from two of the Ozone Mapping Profiler Suite (OMPS) sensors on the Suomi National Polar-orbiting Partnership (SNPP) satellite: total column SO2 from the Nadir Mapper (NM) and aerosol extinction profiles from the Limb Profiler (LP) as well as other satellite data sets. The LP standard aerosol extinction product at 674 nm has been re-processed with an adjustment correcting for limb viewing geometry effects. It was shown that the amount of SO2 decreases with a characteristic period of 8–18 days and the peak of sulfate aerosol recorded at a wavelength of 674 nm lags the initial peak of SO2 by 1.5 months. Using satellite observations and a trajectory model, we examined the dynamics of unusual atmospheric feature that was observed, a stratospheric coherent circular cloud (CCC) of SO2 and aerosol from July 18 to September 22, 2019.


2014 ◽  
Vol 7 (10) ◽  
pp. 3337-3354 ◽  
Author(s):  
M. Pastel ◽  
J.-P. Pommereau ◽  
F. Goutail ◽  
A. Richter ◽  
A. Pazmiño ◽  
...  

Abstract. Long time series of ozone and NO2 total column measurements in the southern tropics are available from two ground-based SAOZ (Système d'Analyse par Observation Zénithale) UV-visible spectrometers operated within the Network for the Detection of Atmospheric Composition Change (NDACC) in Bauru (22° S, 49° W) in S-E Brazil since 1995 and Reunion Island (21° S, 55° E) in the S-W Indian Ocean since 1993. Although the stations are located at the same latitude, significant differences are observed in the columns of both species, attributed to differences in tropospheric content and equivalent latitude in the lower stratosphere. These data are used to identify which satellites operating during the same period, are capturing the same features and are thus best suited for building reliable merged time series for trend studies. For ozone, the satellites series best matching SAOZ observations are EP-TOMS (1995–2004) and OMI-TOMS (2005–2011), whereas for NO2, best results are obtained by combining GOME version GDP5 (1996–2003) and SCIAMACHY – IUP (2003–2011), displaying lower noise and seasonality in reference to SAOZ. Both merged data sets are fully consistent with the larger columns of the two species above South America and the seasonality of the differences between the two stations, reported by SAOZ, providing reliable time series for further trend analyses and identification of sources of interannual variability in the future analysis.


2009 ◽  
Vol 9 (5) ◽  
pp. 22177-22222
Author(s):  
L. W. Thomason ◽  
J. R. Moore ◽  
M. C. Pitts ◽  
J. M. Zawodny ◽  
E.-W. Chiou

Abstract. Herein, we provide an assessment of the data quality of Stratospheric Aerosol and Gas Experiment (SAGE III) Version 4 aerosol extinction coefficient and water vapor data products. The evaluation is based on comparisons with data from four instruments: SAGE II, the Polar Ozone and Aerosol Measurement (POAM III), the Halogen Occultation Experiment (HALOE), and the Microwave Limb Sounder (MLS). Since only about half of the SAGE III channels have a direct comparison with measurements by other instruments, we have employed some empirical techniques to evaluate measurements at some wavelengths. We find that the aerosol extinction coefficient measurements at 449, 520, 755, 869, and 1021 nm are reliable with accuracies and precisions on the order of 10% in the primary aerosol range of 15 to 25 km. We also believe this to be true of the aerosol measurements at 1545 nm though we cannot exclude some positive bias below 15 km. We recommend use of the 385 nm measurements above 16 km where the accuracy is on par with other aerosol channels. The 601 nm measurement is much noisier (~20%) than other channels and we suggest caution in the use of these data. We believe that the 676 nm data are clearly defective particularly above 20 km (accuracy as poor as 50%) and the precision is also low (~30%). We suggest excluding this channel under most circumstances. The SAGE III Version 4 water vapor data product appears to be high quality and is recommended for science applications in the stratosphere below 45 km. In this altitude range, the mean differences with all four corroborative data sets are no bigger than 15% and often less than 10% with exceptional agreement with POAM III and MLS. Above 45 km, it seems likely that SAGE III water vapor values are increasingly too large and should be used cautiously or avoided. We believe that SAGE III meets its preflight goal of 15% accuracy and 10% precision between 15 and 45 km. We do not currently recommend limiting the SAGE III water vapor data utility in the stratosphere by aerosol loading.


2020 ◽  
Author(s):  
Mahesh Kovilakam ◽  
Larry Thomason ◽  
Nicholas Ernest ◽  
Landon Rieger ◽  
Adam Bourassa ◽  
...  

Abstract. A robust stratospheric aerosol climate data record enables the depiction of the radiative forcing of this highly variable component of climate. Since stratospheric aerosol also plays a key role in the chemical processes leading to ozone depletion, stratosphere is one of the crucial parameters in understanding climate change in the past and potential changes in the future. As a part of Stratospheric-tropospheric Processes and their Role in Climate (SPARC) Stratospheric Sulfur and its Role in Climate (SSiRC) activity, the Global Space-based Stratospheric Aerosol Climatology (GloSSAC) was created (Thomason et al., 2018) to support the World Climate Research Programme (WCRP)’s Coupled Model Intercomparison Project Phase 6 (CMIP6) (Zanchettin et al., 2016). This data set is a follow-on to one created as a part of Stratosphere-Troposphere Process and their Role in Climate Project (SPARC)’s Assessment of Stratospheric Aerosol Properties (ASAP) activity(SPARC, 2006) and a data created for Chemistry-Climate Model Initiative (CCMI) in 2012 (Eyring and Lamarque, 2012). Herein, we discuss changes to the original release version including those as a part of v1.1 that was released in September 2018 that primarily corrects an error in the conversion of Cryogenic Limb Array Etalon Spectrometer (CLAES) data to Stratospheric Aerosol and Gas Experiment (SAGE) II wavelengths, and the new release, v2.0. Version 2.0 is focused on improving the post-SAGE II era (after 2005) with the goal to mitigate elevated aerosol extinction in the lower stratosphere at mid and high latitudes noted in v1.0 as noted in Thomason et al. (2018). Changes include the use of version 7.0 of Optical Spectrograph and InfraRed Imaging System(OSIRIS), the recently released Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) Lidar Level 3 Stratospheric Aerosol profile monthly product, and the new addition of SAGE III/ISS. Although, the version 7.0 OSIRIS data is substantially improved at its native wavelength of 750 nm, conversion to 525 nm using a constant Angstrom exponent often results in disagreements with SAGEII/ SAGE III/ISS overlap measurements. We, therefore use an observed relationship between OSIRIS extinction at 750 nm and SAGEII/SAGE III/ISS extinction at 525 nm to derive Altitude-Latitude based monthly climatology of Angstrom exponent to compute extinction at 525 nm, resulting in a better agreement between OSIRIS and SAGE measurements. We employ a similar approach to convert OSIRIS 750 nm extinction to 1020 nm extinction for the post-SAGEII period. Additionally, we incorporate the recently released standard CALIPSO stratospheric aerosol profile monthly product into GloSSAC with an improved conversion technique of 532 nm backscatter coefficient to extinction using an observed relationship between OSIRIS 525 nm extinction and CALIPSO 532 nm backscatter. We also investigate for any cloud contamination in OSIRIS/standard CALIPSO stratospheric aerosol product, which may have caused apparent enhancement in the aerosol extinction particularly in the lower stratosphere. SAGE III/ISS data is also incorporated in GloSSAC to extend the climatology to the present and to test the approach used to correct OSIRIS/CALIPSO data. The GloSSAC v2.0 netcdf file is accessible at https://doi.org/10.5067/glossac-l3-v2.0 (Thomason, 2020).


2013 ◽  
Vol 6 (3) ◽  
pp. 4249-4277
Author(s):  
S. Alkasm ◽  
A. Sarkissian ◽  
P. Keckhut ◽  
A. Pazmino ◽  
F. Goutail ◽  
...  

Abstract. In this work, we compare vertical column density of water vapour measured at Observatoire de Haute-Provence, Southern France (5° 42' E, +43° 55' N). Data were obtained by three satellite sensors, GOME, GOME 2 and SCIAMACHY, and by two ground-based spectrometers, Elodie and SAOZ. These five instruments are able to measure total column density of water vapour in the visible and have different principles of observation. All these instruments reproduce the total column water vapour with good accuracy. The mean difference between the satellite measurements, ground-based measurements, and between both types, are quantified. The diurnal cycle of water vapour above the station and its variability with latitude have been investigated. The differences between these data sets are due sometimes to the differences in the time of the measurements, or to the differences in the geometry of observations, or also due to both effects. The effect of land and sea and the effect of the season on the total column water vapour has been analysed. The global agreement between our data sets range from 10% in summer to 25% in winter, improved significantly when observations are closer in time and location.


2012 ◽  
Vol 12 (17) ◽  
pp. 8177-8188 ◽  
Author(s):  
L. W. Thomason

Abstract. Herein, the Halogen Occultation Experiment (HALOE) aerosol extinction coefficient data is evaluated in the low aerosol loading period after 1996 as the first necessary step in a process that will eventually allow the production of a combined HALOE/SAGE II (Stratospheric Aerosol and Gas Experiment) aerosol climatology of derived aerosol products including surface area density. Based on these analyses, it is demonstrated that HALOE's 3.46 μm is of good quality above 19 km and suitable for scientific applications above that altitude. However, it is increasingly suspect at lower altitudes and should not be used below 17 km under any circumstances after 1996. The 3.40 μm is biased by about 10% throughout the lower stratosphere due to the failure to clear NO2 but otherwise appears to be a high quality product down to 15 km. The 2.45 and 5.26 μm aerosol extinction coefficient measurements are clearly biased and should not be used for scientific applications after the most intense parts of the Pinatubo period. Many of the issues in the aerosol data appear to be related to either the failure to clear some interfering gas species or doing so poorly. For instance, it is clear that the 3.40 μm aerosol extinction coefficient measurements can be improved through the inclusion of an NO2 correction and could, in fact, end up as the highest quality overall HALOE aerosol extinction coefficient measurement. It also appears that the 2.45 and 5.26 μm channels may be improved by updating the Upper Atmosphere Pilot Database which is used as a resource for the removal of gas species otherwise not available from direct HALOE measurements. Finally, a simple model to demonstrate the promise of mixed visible/infrared aerosol extinction coefficient ensembles for the retrieval of bulk aerosol properties demonstrates that a combined HALOE/SAGE II aerosol climatology is feasible and may represent a substantial improvement over independently derived data sets.


2020 ◽  
Author(s):  
Johannes Schneider ◽  
Ralf Weigel ◽  
Thomas Klimach ◽  
Antonis Dragoneas ◽  
Oliver Appel ◽  
...  

Abstract. In this paper we analyze aerosol particle composition measurements from five research missions conducted between 2014 and 2018 sampling the upper troposphere and lower stratosphere (UTLS), to assess the meridional extent of particles containing meteoric material. Additional data sets from a ground based study and from a low altitude aircraft mission are used to confirm the existence of meteoric material in lower tropospheric particles. Single particle laser ablation techniques with bipolar ion detection were used to measure the chemical composition of particles in a size range of approximately 150 nm to 3 μm. The five UTLS aircraft missions cover a latitude range from 15 to 68° N, altitudes up to 21 km, and a potential temperature range from 280 to 480 K. In total, 338 363 single particles were analyzed, of which 147 338 particles were measured in the stratosphere. Of these particles, 50 688 were characterized by high abundances of magnesium, iron, and rare iron oxide compounds, together with sulfuric acid. This particle type was found almost exclusively in the stratosphere (48 610 particles) and is interpreted as meteoric material immersed or dissolved within stratospheric sulfuric acid particles. Below the tropopause, the observed fraction of this particle type decreases sharply. However, small fractional abundances were observed below 3000 m a.s.l. in the Canadian Arctic and also at the Jungfraujoch high altitude station (3600 m a.s.l.). Thus, the removal pathway by sedimentation and/or mixing into the troposphere is confirmed. In the tropical lower stratosphere, only a small fraction (


2011 ◽  
Vol 4 (6) ◽  
pp. 1027-1044 ◽  
Author(s):  
H. Irie ◽  
H. Takashima ◽  
Y. Kanaya ◽  
K. F. Boersma ◽  
L. Gast ◽  
...  

Abstract. We attempt for the first time to retrieve lower-tropospheric vertical profile information for 8 quantities from ground-based Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS) observations. The components retrieved are the aerosol extinction coefficients at two wavelengths, 357 and 476 nm, and NO2, HCHO, CHOCHO, H2O, SO2, and O3 volume mixing ratios. A Japanese MAX-DOAS profile retrieval algorithm, version 1 (JM1), is applied to observations performed at Cabauw, the Netherlands (51.97° N, 4.93° E), in June–July 2009 during the Cabauw Intercomparison campaign of Nitrogen Dioxide measuring Instruments (CINDI). Of the retrieved profiles, we focus here on the lowest-layer data (mean values at altitudes 0–1 km), where the sensitivity is usually highest owing to the longest light path. In support of the capability of the multi-component retrievals, we find reasonable overall agreement with independent data sets, including a regional chemical transport model (CHIMERE) and in situ observations performed near the surface (2–3 m) and at the 200-m height level of the tall tower in Cabauw. Plumes of enhanced HCHO and SO2 were likely affected by biogenic and ship emissions, respectively, and an improvement in their emission strengths is suggested for better agreement between CHIMERE simulations and MAX-DOAS observations. Analysis of air mass factors indicates that the horizontal spatial representativeness of MAX-DOAS observations is about 3–15 km (depending mainly on aerosol extinction), comparable to or better than the spatial resolution of current UV-visible satellite observations and model calculations. These demonstrate that MAX-DOAS provides multi-component data useful for the evaluation of satellite observations and model calculations and can play an important role in bridging different data sets having different spatial resolutions.


2011 ◽  
Vol 4 (2) ◽  
pp. 1795-1823
Author(s):  
B. Ovigneur ◽  
J. Landgraf ◽  
I. Aben

Abstract. In this paper we present an approach to retrieve stratospheric aerosol number densities in the altitude range 10–40 km from SCIAMACHY limb radiance measurements in the spectral range of the O2 A absorption band, near 760 nm. Here, the characteristic light paths differ for the measured light in the O2 A band and in the spectral continuum next to the absorption band. This difference is used to distinguish the effect of stratospheric aerosol scattering and ground reflection on the limb measurement. The capability to disentangle both effects is illustrated for SCIAMACHY limb observations over the Libyan desert, where the measurements are not affected by tropospheric clouds. Comparison of the SCIAMACHY retrieval and the SAGE II aerosol extinction product between 75 degrees Southern and Northern latitude shows the clear need for prior knowledge of the mean size of the stratospheric aerosol for the SCIAMACHY retrieval. We found best agreement between SCIAMACHY and SAGE II aerosol extinction for the period 2003–2005 for a prior choice of the mean aerosol size radius of 0.2 μm. The overall agreement between both data sets is in the range <50% root mean square difference at 14–30 km with a minimum of 30% at 22 km.


2015 ◽  
Vol 33 (3) ◽  
pp. 351-362 ◽  
Author(s):  
P. Kulkarni ◽  
S. Ramachandran

Abstract. An extensive comparison of aerosol extinction has been performed using lidar and Stratospheric Aerosol and Gas Experiment (SAGE) II data over Gadanki (13.5° N, 79.2° E), a tropical station in India, following coincident criteria during volcanically quiescent conditions from 1998 to 2005. The aerosol extinctions derived from lidar are higher than SAGE II during all seasons in the upper troposphere (UT), while in the lower-stratosphere (LS) values are closer. The seasonal mean percent differences between lidar and SAGE II aerosol extinctions are > 100% in the UT and < 50% above 25 km. Different techniques (point and limb observations) played the major role in producing the observed differences. SAGE II aerosol extinction in the UT increases as the longitudinal coverage is increased as the spatial aerosol extent increases, while similar extinction values in LS confirm the zonal homogeneity of LS aerosols. The study strongly emphasized that the best meteorological parameters close to the lidar measurement site in terms of space and time and Ba (sr−1), the ratio between aerosol backscattering and extinction, are needed for the tropics for a more accurate derivation of aerosol extinction.


Sign in / Sign up

Export Citation Format

Share Document