scholarly journals Contrasting Mineral Dust Abundances from X-Ray Diffraction and Reflectance Spectroscopy

2021 ◽  
Author(s):  
Mohammad R. Sadrian ◽  
Wendy M. Calvin ◽  
John McCormack
Keyword(s):  
Radiative Forcing ◽  
Mineral Dust ◽  
Reflectance Spectroscopy ◽  
Urban Setting ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
X Ray Diffraction ◽  
Atmospheric Dust ◽  
X Ray

Abstract. Mineral dust particles dominate aerosol mass in the atmosphere and directly modify Earth’s radiative balance through absorption and scattering. This radiative forcing varies strongly with mineral composition, yet there is still limited knowledge on the mineralogy of atmospheric dust. In this study, we performed X-ray diffraction (XRD) and reflectance spectroscopy measurements on 37 different atmospheric dust samples collected as airfall in an urban setting to determine mineralogy and the relative proportions of minerals in the dust mixture. Most commonly, XRD has been used to characterize dust mineralogy; however, without prior special sample preparation, this technique is less effective for identifying poorly crystalline or amorphous phases. In addition to XRD measurements, we performed visible, near-infrared, and short-wave infrared (VNIR/SWIR) reflectance spectroscopy for these natural dust samples as a complementary technique to determine minerology and mineral abundances. Reflectance spectra of dust particles are a function of a nonlinear combination of mineral abundances in the mixture. Therefore, we used a Hapke radiative transfer model along with a linear spectral mixing approach to derive relative mineral abundances from reflectance spectroscopy. We compared spectrally derived abundances with those determined semi-quantitatively from XRD. Our results demonstrate that total clay mineral abundances from XRD are correlated with those from reflectance spectroscopy and follow similar trends; however, XRD underpredicts the total amount of clay for many of the samples. On the other hand, calcite abundances are significantly underpredicted by SWIR compared to XRD. This is caused by the weakening of absorption features associated with the fine particle size of the samples, as well as the presence of dark non-mineral materials (e.g., asphalt) in these samples. Another possible explanation for abundance discrepancies between XRD and SWIR is related to the differing sensitivity of the two techniques (crystal structure vs chemical bonds). Our results indicate that it is beneficial to use both XRD and reflectance spectroscopy to characterize airfall dust, because the former technique is good at identifying and quantifying the SWIR-transparent minerals (e.g., quartz, albite, and microcline), while the latter technique is superior for determining abundances for clays and non-mineral components.

scholarly journals Dust vertical profile impact on global radiative forcing estimation using a coupled chemical-transport–radiative-transfer model

2013 ◽  
Vol 13 (14) ◽  
pp. 7097-7114 ◽  
Author(s):  
L. Zhang ◽  
Q. B. Li ◽  
Y. Gu ◽  
K. N. Liou ◽  
B. Meland
Keyword(s):  
Heating Rate ◽  
Vertical Profile ◽  
Radiative Forcing ◽  
Asian Dust ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Vertical Profiles ◽  
Dust Source ◽  
Source Regions

Abstract. Atmospheric mineral dust particles exert significant direct radiative forcings and are important drivers of climate and climate change. We used the GEOS-Chem global three-dimensional chemical transport model (CTM) coupled with the Fu-Liou-Gu (FLG) radiative transfer model (RTM) to investigate the dust radiative forcing and heating rate based on different vertical profiles for April 2006. We attempt to actually quantify the sensitivities of radiative forcing to dust vertical profiles, especially the discrepancies between using realistic and climatological vertical profiles. In these calculations, dust emissions were constrained by observations of aerosol optical depth (AOD). The coupled calculations utilizing a more realistic dust vertical profile simulated by GEOS-Chem minimize the physical inconsistencies between 3-D CTM aerosol fields and the RTM. The use of GEOS-Chem simulated vertical profile of dust extinction, as opposed to the FLG prescribed vertical profile, leads to greater and more spatially heterogeneous changes in the estimated radiative forcing and heating rate produced by dust. Both changes can be attributed to a different vertical structure between dust and non-dust source regions. Values of the dust vertically resolved AOD per grid level (VRAOD) are much larger in the middle troposphere, though smaller at the surface when the GEOS-Chem simulated vertical profile is used, which leads to a much stronger heating rate in the middle troposphere. Compared to the FLG vertical profile, the use of GEOS-Chem vertical profile reduces the solar radiative forcing at the top of atmosphere (TOA) by approximately 0.2–0.25 W m−2 over the African and Asian dust source regions. While the Infrared (IR) radiative forcing decreases 0.2 W m−2 over African dust belt, it increases 0.06 W m−2 over the Asian dust belt when the GEOS-Chem vertical profile is used. Differences in the solar radiative forcing at the surface between the use of the GEOS-Chem and FLG vertical profiles are most significant over the Gobi desert with a value of about 1.1 W m−2. The radiative forcing effect of dust particles is more pronounced at the surface over the Sahara and Gobi deserts by using FLG vertical profile, while it is less significant over the downwind area of Eastern Asia.

scholarly journals Improved estimate of global dust radiative forcing using a coupled chemical transport-radiative transfer model

2013 ◽  
Vol 13 (1) ◽  
pp. 2415-2456 ◽  
Author(s):  
L. Zhang ◽  
Q. B. Li ◽  
Y. Gu ◽  
K. N. Liou ◽  
B. Meland
Keyword(s):  
Radiative Transfer ◽  
Vertical Profile ◽  
Radiative Forcing ◽  
Chemical Transport ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Vertical Profiles ◽  
Dust Source ◽  
Source Regions

Abstract. Atmospheric mineral dust particles exert significant direct radiative forcings and are critical drivers of climate change. Here, we use the GEOS-Chem global three-dimensional chemical transport model (3-D CTM) coupled online with the Fu-Liou-Gu (FLG) radiative transfer model (RTM) to investigate the dust radiative forcing and heating rates based on different dust vertical profiles. The coupled calculations using a realistic dust vertical profile simulated by GEOS-Chem minimize the physical inconsistencies between 3-D CTM aerosol fields and the RTM. The use of GEOS-Chem simulated aerosol optical depth (AOD) vertical profiles as opposed to the FLG prescribed AOD vertical profiles leads to greater and more spatially heterogeneous changes in estimated radiative forcing and heating rate produced by dust. Both changes can be attributed to a different vertical structure between dust and non-dust source regions. Values of the dust AOD are much larger in the middle troposphere, though smaller at the surface when the GEOS-Chem simulated AOD vertical profile is used, which leads to a much stronger heating rate in the middle troposphere. Compared to FLG vertical profile, the use of GEOS-Chem vertical profile reduces the solar radiative forcing effect by about 0.2–0.25 W m−2 and the Infrared (IR) radiative forcing over the African and Asia dust source regions by about 0.1–0.2 W m−2. Differences in the solar radiative forcing at the surface between using the GEOS-Chem vertical profile and the FLG vertical profile are most significant over the Gobi desert with a value of about 1.1 W m−2. The radiative forcing effect of dust particles is more pronounced at the surface over the Sahara and Gobi deserts by using FLG vertical profile, while it is less significant over the downwind area of Eastern Asia.

scholarly journals Pre-monsoon aerosol characteristics over the Indo-Gangetic Basin: implications to climatic impact

2011 ◽  
Vol 29 (5) ◽  
pp. 789-804 ◽  
Author(s):  
A. K. Srivastava ◽  
S. Tiwari ◽  
P. C. S. Devara ◽  
D. S. Bisht ◽  
Manoj K. Srivastava ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Geographical Location ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Climatic Impact ◽  
Surface Cooling ◽  
Monsoon Period ◽  
Aerosol Radiative Forcing ◽  
Absorbing Aerosols

Abstract. Sun/sky radiometer observations over the Indo-Gangetic Basin (IGB) region during pre-monsoon (from April–June 2009) have been processed to analyze various aerosol characteristics in the central and eastern IGB region, represented by Kanpur and Gandhi College, respectively, and their impacts on climate in terms of radiative forcing. Monthly mean aerosol optical depth (AOD at 500 nm) and corresponding Angstrom Exponent (AE at 440–870 nm, given within the brackets) was observed to be about 0.50 (0.49) and 0.51 (0.65) in April, 0.65 (0.74) and 0.67 (0.91) in May and 0.69 (0.45) and 0.77 (0.71) in June at Kanpur and Gandhi College, respectively. Results show a positive gradient in AOD and AE from central to eastern IGB region with the advancement of the pre-monsoon, which may be caused due to diverse geographical location of the stations having different meteorological conditions and emission sources. Relatively lower SSA was observed at the eastern IGB (0.89) than the central IGB (0.92) region during the period, which suggests relative dominance of absorbing aerosols at the eastern IGB as compared to central IGB region. The absorbing aerosol optical properties over the station suggest that the atmospheric absorption over central IGB region is mainly due to dominance of coarse-mode dust particles; however, absorption over eastern IGB region is mainly due to dominance of fine-particle pollution. The derived properties from sun/sky radiometer during pre-monsoon period are used in a radiative-transfer model to estimate aerosol radiative forcing at the top-of-the atmosphere (TOA) and at the surface over the IGB region. Relatively large TOA and surface cooling was observed at the eastern IGB as compared to the central IGB region. This translates into large heating of the atmosphere ranging from 0.45 to 0.55 K day−1 at Kanpur and from 0.45 to 0.59 K day−1 at Gandhi College.

scholarly journals Estimation of mineral dust long-wave radiative forcing: sensitivity study to particle properties and application to real cases in the region of Barcelona

2014 ◽  
Vol 14 (17) ◽  
pp. 9213-9231 ◽  
Author(s):  
M. Sicard ◽  
S. Bertolín ◽  
M. Mallet ◽  
P. Dubuisson ◽  
A. Comerón
Keyword(s):  
Spectral Range ◽  
Radiative Forcing ◽  
Mineral Dust ◽  
Opposite Sign ◽  
Sensitivity Study ◽  
Short Wave ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Radiative Effect ◽  
Long Wave

Abstract. The aerosol radiative effect in the long-wave (LW) spectral range is sometimes not taken into account in atmospheric aerosol forcing studies at local scale because the LW aerosol effect is assumed to be negligible. At regional and global scale this effect is partially taken into account: aerosol absorption is taken into account but scattering is still neglected. However, aerosols with strong absorbing and scattering properties in the LW region, like mineral dust, can have a non-negligible radiative effect in the LW spectral range (both at surface and top of the atmosphere) which can counteract their cooling effect occurring in the short-wave spectral range. The first objective of this research is to perform a sensitivity study of mineral dust LW radiative forcing (RF) as a function of dust microphysical and optical properties using an accurate radiative transfer model which can compute vertically resolved short-wave and long-wave aerosol RF. Radiative forcing simulations in the LW range have shown an important sensitivity to the following parameters: aerosol load, radius of the coarse mode, refractive index, aerosol vertical distribution, surface temperature and surface albedo. The scattering effect has been estimated to contribute to the LW RF up to 18% at the surface and up to 38% at the top of the atmosphere. The second objective is the estimation of the short-wave and long-wave dust RF for 11 dust outbreaks observed in Barcelona. At the surface, the LW RF varies between +2.8 and +10.2 W m−2, which represents between 11 and 26% (with opposite sign) of the SW component, while at the top of the atmosphere the LW RF varies between +0.6 and +5.8 W m−2, which represents between 6 and 26% (with opposite sign) of the SW component.

scholarly journals 2-D mineral dust radiative forcing calculations from CALIPSO observations over Europe

2019 ◽  
Author(s):  
Maria José Granados-Muñoz ◽  
Michaël Sicard ◽  
Nikolaos Papagiannopoulos ◽  
Rubén Barragán ◽  
Juan Antonio Bravo-Aranda ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Mineral Dust ◽  
Single Point ◽  
Strong Dependence ◽  
Radiant Energy ◽  
Radiative Properties ◽  
Radiative Transfer Model ◽  
Orthogonal Polarization ◽  
Transfer Model ◽  
Radiative Effects

Abstract. A demonstration study to examine the feasibility to retrieve dust radiative effects based on combined satellite data from MODIS (Moderate Resolution Imaging Spectroradiometer), CERES (Clouds and the Earth’s Radiant Energy System) and CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) li-dar vertical profiles along their orbit is presented. The radiative transfer model GAME (Global Atmos-pheric Model) is used to estimate the shortwave and longwave dust radiative effects below the CALIP-SO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite) orbit assuming an aerosol parameterization based on CALIOP vertical distribution at a horizontal resolution of 5 km and additional AERONET (Aerosol Robotic Network) data. Two study cases are analysed; a strong long-range transport mineral dust event (AOD = 0.52) originated in the Sahara Desert and reaching the United Kingdom and a weaker event (AOD = 0.16) affecting Eastern Europe. The obtained radiative fluxes are first validated in terms of radiative forcing efficiency at a single point with space-time co-located lidar ground-based measurements from EARLINET (European Aerosol Research Lidar Network) stations below the orbit. The methodology is then applied to the full orbit. The obtained results indicate that the radiative effects show a strong dependence on the aerosol load, highlighting the need of accurate AOD measurements for forcing studies, and on the surface albedo. The calculated dust radiative effects and heating rates below the orbits are in good agreement with previous studies of mineral dust, with the forcing efficiency obtained at the surface ranging between −80.3 and −63.0 W m−2 for the weaker event and −119.1 and −79.3 W m−2 for the strong one. Results thus demonstrate the validity of the presented method to retrieve 2-D accurate radiative properties with large spatial and temporal coverage.

scholarly journals Estimation of mineral dust longwave radiative forcing: sensitivity study to particle properties and application to real cases over Barcelona

2014 ◽  
Vol 14 (6) ◽  
pp. 8533-8573 ◽  
Author(s):  
M. Sicard ◽  
S. Bertolín ◽  
M. Mallet ◽  
P. Dubuisson ◽  
A. Comerón
Keyword(s):  
Spectral Range ◽  
Radiative Forcing ◽  
Mineral Dust ◽  
Opposite Sign ◽  
Sensitivity Study ◽  
Global Scale ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Radiative Effect ◽  
Aerosol Forcing

Abstract. The aerosol radiative effect in the longwave (LW) spectral range is sometimes not taken into account in atmospheric aerosol forcing studies at local scale because the LW aerosol effect is assumed to be negligible. At regional and global scale this effect is partially taken into account: aerosol absorption is taken into account but scattering is still neglected. However, aerosols with strong absorbing and scattering properties in the LW region, like mineral dust, can have a non-negligible radiative effect in the LW spectral range (both at surface and top of the atmosphere) which can counteract their cooling effect occurring in the shortwave spectral range. The first objective of this research is to perform a sensitivity study of mineral dust LW radiative forcing (RF) as a function of dust microphysical and optical properties using an accurate radiative transfer model which can compute vertically-resolved shortwave and longwave aerosol RF. Radiative forcing simulations in the LW range have shown an important sensitivity to the following parameters: aerosol load, radius of the coarse mode, refractive index, aerosol vertical distribution, surface temperature and surface albedo. The scattering effect has been estimated to contribute to the LW RF up to 18% at the surface and up to 38% at the top of the atmosphere. The second objective is the estimation of the shortwave and longwave dust RF for 11 dust outbreaks observed in Barcelona. At the surface, the LW RF varies between +2.8 and +10.2 W m−2, which represents between 11 and 26% (with opposite sign) of the SW component, while at the top of the atmosphere the LW RF varies between +0.6 and +5.8 W m−2, which represents between 6 and 26% (with opposite sign) of the SW component.

scholarly journals Modeling the radiative effects of desert dust on weather and regional climate

2013 ◽  
Vol 13 (11) ◽  
pp. 5489-5504 ◽  
Author(s):  
C. Spyrou ◽  
G. Kallos ◽  
C. Mitsakou ◽  
P. Athanasiadis ◽  
C. Kalogeri ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Regional Climate ◽  
Lower Troposphere ◽  
Integrated Approach ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Limited Area ◽  
Transfer Model ◽  
Radiative Effects ◽  
Desert Dust

Abstract. Mineral dust aerosols exert a significant effect on both solar and terrestrial radiation. By absorbing and scattering, the solar radiation aerosols reduce the amount of energy reaching the surface. In addition, aerosols enhance the greenhouse effect by absorbing and emitting outgoing longwave radiation. Desert dust forcing exhibits large regional and temporal variability due to its short lifetime and diverse optical properties, further complicating the quantification of the direct radiative effect (DRE). The complexity of the links and feedbacks of dust on radiative transfer indicate the need for an integrated approach in order to examine these impacts. In order to examine these feedbacks, the SKIRON limited area model has been upgraded to include the RRTMG (Rapid Radiative Transfer Model – GCM) radiative transfer model that takes into consideration the aerosol radiative effects. It was run for a 6 year period. Two sets of simulations were performed, one without the effects of dust and the other including the radiative feedback. The results were first evaluated using aerosol optical depth data to examine the capabilities of the system in describing the desert dust cycle. Then the aerosol feedback on radiative transfer was quantified and the links between dust and radiation were studied. The study has revealed a strong interaction between dust particles and solar and terrestrial radiation, with several implications on the energy budget of the atmosphere. A profound effect is the increased absorption (in the shortwave and longwave) in the lower troposphere and the induced modification of the atmospheric temperature profile. These feedbacks depend strongly on the spatial distribution of dust and have more profound effects where the number of particles is greater, such as near their source.

Visible-Light-Induced Photocatalytic Activity of Boron-Doped BiVO4

2014 ◽  
Vol 809-810 ◽  
pp. 890-894
Author(s):  
Dan Li ◽  
Lian Wei Shan ◽  
Gui Lin Wang ◽  
Li Min Dong ◽  
Wei Li ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Reflectance Spectroscopy ◽  
Scheelite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Boron Doped

Boron-BiVO4 samples were synthesized by sol-gel method. They were characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction. Photocatalytic activity of the obtained BiVO4 samples was investigated through degrading methylene blue (MB). The results reveal that boron-BiVO4 catalysts have monoclinic scheelite structure. The BiVO4 and Co-BiVO4 photocatalysts were responsive to visible light. Co-BiVO4 photocatalyst showed higher photocatalytic activity than pure BiVO4, resulting in the significantly improved efficiency of degradation of MB.

Sign in / Sign up

Export Citation Format

Share Document