scholarly journals Improved estimate of global dust radiative forcing using a coupled chemical transport-radiative transfer model

2013 ◽  
Vol 13 (1) ◽  
pp. 2415-2456 ◽  
Author(s):  
L. Zhang ◽  
Q. B. Li ◽  
Y. Gu ◽  
K. N. Liou ◽  
B. Meland
Keyword(s):  
Radiative Transfer ◽  
Vertical Profile ◽  
Radiative Forcing ◽  
Chemical Transport ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Vertical Profiles ◽  
Dust Source ◽  
Source Regions

Abstract. Atmospheric mineral dust particles exert significant direct radiative forcings and are critical drivers of climate change. Here, we use the GEOS-Chem global three-dimensional chemical transport model (3-D CTM) coupled online with the Fu-Liou-Gu (FLG) radiative transfer model (RTM) to investigate the dust radiative forcing and heating rates based on different dust vertical profiles. The coupled calculations using a realistic dust vertical profile simulated by GEOS-Chem minimize the physical inconsistencies between 3-D CTM aerosol fields and the RTM. The use of GEOS-Chem simulated aerosol optical depth (AOD) vertical profiles as opposed to the FLG prescribed AOD vertical profiles leads to greater and more spatially heterogeneous changes in estimated radiative forcing and heating rate produced by dust. Both changes can be attributed to a different vertical structure between dust and non-dust source regions. Values of the dust AOD are much larger in the middle troposphere, though smaller at the surface when the GEOS-Chem simulated AOD vertical profile is used, which leads to a much stronger heating rate in the middle troposphere. Compared to FLG vertical profile, the use of GEOS-Chem vertical profile reduces the solar radiative forcing effect by about 0.2–0.25 W m−2 and the Infrared (IR) radiative forcing over the African and Asia dust source regions by about 0.1–0.2 W m−2. Differences in the solar radiative forcing at the surface between using the GEOS-Chem vertical profile and the FLG vertical profile are most significant over the Gobi desert with a value of about 1.1 W m−2. The radiative forcing effect of dust particles is more pronounced at the surface over the Sahara and Gobi deserts by using FLG vertical profile, while it is less significant over the downwind area of Eastern Asia.

scholarly journals Dust vertical profile impact on global radiative forcing estimation using a coupled chemical-transport–radiative-transfer model

2013 ◽  
Vol 13 (14) ◽  
pp. 7097-7114 ◽  
Author(s):  
L. Zhang ◽  
Q. B. Li ◽  
Y. Gu ◽  
K. N. Liou ◽  
B. Meland
Keyword(s):  
Heating Rate ◽  
Vertical Profile ◽  
Radiative Forcing ◽  
Asian Dust ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Vertical Profiles ◽  
Dust Source ◽  
Source Regions

Abstract. Atmospheric mineral dust particles exert significant direct radiative forcings and are important drivers of climate and climate change. We used the GEOS-Chem global three-dimensional chemical transport model (CTM) coupled with the Fu-Liou-Gu (FLG) radiative transfer model (RTM) to investigate the dust radiative forcing and heating rate based on different vertical profiles for April 2006. We attempt to actually quantify the sensitivities of radiative forcing to dust vertical profiles, especially the discrepancies between using realistic and climatological vertical profiles. In these calculations, dust emissions were constrained by observations of aerosol optical depth (AOD). The coupled calculations utilizing a more realistic dust vertical profile simulated by GEOS-Chem minimize the physical inconsistencies between 3-D CTM aerosol fields and the RTM. The use of GEOS-Chem simulated vertical profile of dust extinction, as opposed to the FLG prescribed vertical profile, leads to greater and more spatially heterogeneous changes in the estimated radiative forcing and heating rate produced by dust. Both changes can be attributed to a different vertical structure between dust and non-dust source regions. Values of the dust vertically resolved AOD per grid level (VRAOD) are much larger in the middle troposphere, though smaller at the surface when the GEOS-Chem simulated vertical profile is used, which leads to a much stronger heating rate in the middle troposphere. Compared to the FLG vertical profile, the use of GEOS-Chem vertical profile reduces the solar radiative forcing at the top of atmosphere (TOA) by approximately 0.2–0.25 W m−2 over the African and Asian dust source regions. While the Infrared (IR) radiative forcing decreases 0.2 W m−2 over African dust belt, it increases 0.06 W m−2 over the Asian dust belt when the GEOS-Chem vertical profile is used. Differences in the solar radiative forcing at the surface between the use of the GEOS-Chem and FLG vertical profiles are most significant over the Gobi desert with a value of about 1.1 W m−2. The radiative forcing effect of dust particles is more pronounced at the surface over the Sahara and Gobi deserts by using FLG vertical profile, while it is less significant over the downwind area of Eastern Asia.

scholarly journals Modeling the radiative effects of desert dust on weather and regional climate

2013 ◽  
Vol 13 (11) ◽  
pp. 5489-5504 ◽  
Author(s):  
C. Spyrou ◽  
G. Kallos ◽  
C. Mitsakou ◽  
P. Athanasiadis ◽  
C. Kalogeri ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Regional Climate ◽  
Lower Troposphere ◽  
Integrated Approach ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Limited Area ◽  
Transfer Model ◽  
Radiative Effects ◽  
Desert Dust

Abstract. Mineral dust aerosols exert a significant effect on both solar and terrestrial radiation. By absorbing and scattering, the solar radiation aerosols reduce the amount of energy reaching the surface. In addition, aerosols enhance the greenhouse effect by absorbing and emitting outgoing longwave radiation. Desert dust forcing exhibits large regional and temporal variability due to its short lifetime and diverse optical properties, further complicating the quantification of the direct radiative effect (DRE). The complexity of the links and feedbacks of dust on radiative transfer indicate the need for an integrated approach in order to examine these impacts. In order to examine these feedbacks, the SKIRON limited area model has been upgraded to include the RRTMG (Rapid Radiative Transfer Model – GCM) radiative transfer model that takes into consideration the aerosol radiative effects. It was run for a 6 year period. Two sets of simulations were performed, one without the effects of dust and the other including the radiative feedback. The results were first evaluated using aerosol optical depth data to examine the capabilities of the system in describing the desert dust cycle. Then the aerosol feedback on radiative transfer was quantified and the links between dust and radiation were studied. The study has revealed a strong interaction between dust particles and solar and terrestrial radiation, with several implications on the energy budget of the atmosphere. A profound effect is the increased absorption (in the shortwave and longwave) in the lower troposphere and the induced modification of the atmospheric temperature profile. These feedbacks depend strongly on the spatial distribution of dust and have more profound effects where the number of particles is greater, such as near their source.

Radiative forcing over the Arctic of aerosols from the August 2017 Canadian and Greenlandic wildfires

2021 ◽  
Author(s):  
Filippo Calì Quaglia ◽  
Daniela Meloni ◽  
Alcide Giorgio di Sarra ◽  
Tatiana Di Iorio ◽  
Virginia Ciardini ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Radiative Forcing ◽  
Solar Zenith Angle ◽  
Surface Albedo ◽  
High Arctic ◽  
The Arctic ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Aerosol Layer ◽  
Radiative Effect

<p>Extended and intense wildfires occurred in Northern Canada and, unexpectedly, on the Greenlandic West coast during summer 2017. The thick smoke plume emitted into the atmosphere was transported to the high Arctic, producing one of the largest impacts ever observed in the region. Evidence of Canadian and Greenlandic wildfires was recorded at the Thule High Arctic Atmospheric Observatory (THAAO, 76.5°N, 68.8°W, www.thuleatmos-it.it) by a suite of instruments managed by ENEA, INGV, Univ. of Florence, and NCAR. Ground-based observations of the radiation budget have allowed quantification of the surface radiative forcing at THAAO. </p><p>Excess biomass burning chemical tracers such as CO, HCN, H2CO, C2H6, and NH3 were  measured in the air column above Thule starting from August 19 until August 23. The aerosol optical depth (AOD) reached a peak value of about 0.9 on August 21, while an enhancement of wildfire compounds was  detected in PM10. The measured shortwave radiative forcing was -36.7 W/m2 at 78° solar zenith angle (SZA) for AOD=0.626.</p><p>MODTRAN6.0 radiative transfer model (Berk et al., 2014) was used to estimate the aerosol radiative effect and the heating rate profiles at 78° SZA. Measured temperature profiles, integrated water vapour, surface albedo, spectral AOD and aerosol extinction profiles from CALIOP onboard CALIPSO were used as model input. The peak  aerosol heating rate (+0.5 K/day) was  reached within the aerosol layer between 8 and 12 km, while the maximum radiative effect (-45.4 W/m2) is found at 3 km, below the largest aerosol layer.</p><p>The regional impact of the event that occurred on August 21 was investigated using a combination of atmospheric radiative transfer modelling with measurements of AOD and ground surface albedo from MODIS. The aerosol properties used in the radiative transfer model were constrained by in situ measurements from THAAO. Albedo data over the ocean have been obtained from Jin et al. (2004). Backward trajectories produced through HYSPLIT simulations (Stein et al., 2015) were also employed to trace biomass burning plumes.</p><p>The radiative forcing efficiency (RFE) over land and ocean was derived, finding values spanning from -3 W/m2 to -132 W/m2, depending on surface albedo and solar zenith angle. The fire plume covered a vast portion of the Arctic, with large values of the daily shortwave RF (< -50 W/m2) lasting for a few days. This large amount of aerosol is expected to influence cloud properties in the Arctic, producing significant indirect radiative effects.</p>

Greenhouse effects of aircraft emissions as calculated by a radiative transfer model

1995 ◽  
Vol 13 (4) ◽  
pp. 413-418 ◽  
Author(s):  
J. P. F. Fortuin ◽  
R. van Dorland ◽  
W. M. F. Wauben ◽  
H. Kelder
Keyword(s):  
Water Vapor ◽  
Radiative Transfer ◽  
Indirect Effect ◽  
Radiative Forcing ◽  
Combustion Products ◽  
Ozone Production ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Aircraft Emissions ◽  
The North

Abstract. With a radiative transfer model, assessments are made of the radiative forcing in northern mid-latitudes due to aircraft emissions up to 1990. Considered are the direct climate effects from the major combustion products carbon dioxide, nitrogen dioxide, water vapor and sulphur dioxide, as well as the indirect effect of ozone production from NOx emissions. Our study indicates a local radiative forcing at the tropopause which should be negative in summer (–0.5 to 0.0 W/m2) and either negative or positive in winter (–0.3 to 0.2 W/m2). To these values the indirect effect of contrails has to be added, which for the North Atlantic Flight Corridor covers the range –0.2 to 0.3 W/m2 in summer and 0.0 to 0.3 W/m2 in winter. Apart from optically dense non-aged contrails during summer, negative forcings are due to solar screening by sulphate aerosols. The major positive contributions come from contrails, stratospheric water vapor in winter and ozone in summer. The direct effect of NO2 is negligible and the contribution of CO2 is relatively small.

scholarly journals Contrasting Mineral Dust Abundances from X-Ray Diffraction and Reflectance Spectroscopy

2021 ◽  
Author(s):  
Mohammad R. Sadrian ◽  
Wendy M. Calvin ◽  
John McCormack
Keyword(s):  
Radiative Forcing ◽  
Mineral Dust ◽  
Reflectance Spectroscopy ◽  
Urban Setting ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
X Ray Diffraction ◽  
Atmospheric Dust ◽  
X Ray

Abstract. Mineral dust particles dominate aerosol mass in the atmosphere and directly modify Earth’s radiative balance through absorption and scattering. This radiative forcing varies strongly with mineral composition, yet there is still limited knowledge on the mineralogy of atmospheric dust. In this study, we performed X-ray diffraction (XRD) and reflectance spectroscopy measurements on 37 different atmospheric dust samples collected as airfall in an urban setting to determine mineralogy and the relative proportions of minerals in the dust mixture. Most commonly, XRD has been used to characterize dust mineralogy; however, without prior special sample preparation, this technique is less effective for identifying poorly crystalline or amorphous phases. In addition to XRD measurements, we performed visible, near-infrared, and short-wave infrared (VNIR/SWIR) reflectance spectroscopy for these natural dust samples as a complementary technique to determine minerology and mineral abundances. Reflectance spectra of dust particles are a function of a nonlinear combination of mineral abundances in the mixture. Therefore, we used a Hapke radiative transfer model along with a linear spectral mixing approach to derive relative mineral abundances from reflectance spectroscopy. We compared spectrally derived abundances with those determined semi-quantitatively from XRD. Our results demonstrate that total clay mineral abundances from XRD are correlated with those from reflectance spectroscopy and follow similar trends; however, XRD underpredicts the total amount of clay for many of the samples. On the other hand, calcite abundances are significantly underpredicted by SWIR compared to XRD. This is caused by the weakening of absorption features associated with the fine particle size of the samples, as well as the presence of dark non-mineral materials (e.g., asphalt) in these samples. Another possible explanation for abundance discrepancies between XRD and SWIR is related to the differing sensitivity of the two techniques (crystal structure vs chemical bonds). Our results indicate that it is beneficial to use both XRD and reflectance spectroscopy to characterize airfall dust, because the former technique is good at identifying and quantifying the SWIR-transparent minerals (e.g., quartz, albite, and microcline), while the latter technique is superior for determining abundances for clays and non-mineral components.

scholarly journals Inter-comparison of MAX-DOAS measurements of tropospheric HONO slant column densities and vertical profiles during the CINDI-2 Campaign

2020 ◽  
Author(s):  
Yang Wang ◽  
Arnoud Apituley ◽  
Alkiviadis Bais ◽  
Steffen Beirle ◽  
Nuria Benavent ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Estimation Method ◽  
Optimal Estimation ◽  
Early Morning ◽  
Radiative Transfer Model ◽  
Measuring Instruments ◽  
Transfer Model ◽  
Vertical Profiles ◽  
Near Surface ◽  
Profile Inversion

Abstract. We present the inter-comparison of delta slant column densities (SCDs) and vertical profiles of nitrous acid (HONO) derived from measurements of different MAX-DOAS instruments and using different inversion algorithms during the Second Cabauw Inter-comparison campaign for Nitrogen Dioxide measuring Instruments (CINDI-2), in September 2016, at Cabauw, The Netherlands (51.97° N, 4.93° E). Systematic discrepancies of HONO delta SCDs are observed in the range of ±0.3 × 1015 molecules cm−2, which is half of the typical random discrepancy of 0.6 × 1015 molecules cm−2. For a typical high HONO delta SCD of 2 × 1015 molecules cm−2, the relative systematic and random discrepancies are about 15 % and 30 %, respectively. The inter-comparison of HONO profiles shows that both systematic and random discrepancies of HONO VCDs and near-surface volume mixing ratios (VMRs) are mostly in the range of ~ ±0.5 × 1015 molecules cm−2 and ~ ±0.1 ppb (typically ~ 20 %). Further we find that the discrepancies of the retrieved HONO profiles are dominated by discrepancies of the HONO delta SCDs. The profile retrievals only contribute to the discrepancies of the HONO profiles by ~ 5 %. However, some data sets with substantial larger discrepancies than the typical values indicate that inappropriate implementations of profile inversion algorithms and configurations of radiative transfer models in the profile retrievals can also be an important uncertainty source. In addition, estimations of measurement uncertainties of HONO dSCDs, which can significantly impact profile retrievals using the optimal estimation method, need to consider not only DOAS fit errors, but also atmospheric variability, especially for an instrument with a DOAS fit error lower than ~ 3 × 1015 molecules cm−2. The MAX-DOAS results during the CINDI-2 campaign indicate that the peak HONO levels (e.g. near-surface VMRs of ~ 0.4 ppb) often appeared in the early morning and below 0.2 km. The near-surface VMRs retrieved from the MAX-DOAS observations are compared with those measured using a co-located long-path DOAS instrument. The systematic differences are smaller than 0.15 ppb and 0.07 ppb during early morning and around noon, respectively. Since true HONO values at high altitudes are not known in the absence of real measurements, in order to evaluate the abilities of profile inversion algorithms to respond to different HONO profile shapes, we performed sensitivity studies using synthetic HONO delta SCDs simulated by a radiative transfer model with assumed HONO profiles. The tests indicate that the profile inversion algorithms based on the optimal estimation method with proper configurations can well reproduce the different HONO profile shapes. Therefore we conclude that the feature of HONO accumulated near the surface derived from MAX-DOAS measurements are expected to well represent the ambient HONO profiles.

scholarly journals Pre-monsoon aerosol characteristics over the Indo-Gangetic Basin: implications to climatic impact

2011 ◽  
Vol 29 (5) ◽  
pp. 789-804 ◽  
Author(s):  
A. K. Srivastava ◽  
S. Tiwari ◽  
P. C. S. Devara ◽  
D. S. Bisht ◽  
Manoj K. Srivastava ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Geographical Location ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Climatic Impact ◽  
Surface Cooling ◽  
Monsoon Period ◽  
Aerosol Radiative Forcing ◽  
Absorbing Aerosols

Abstract. Sun/sky radiometer observations over the Indo-Gangetic Basin (IGB) region during pre-monsoon (from April–June 2009) have been processed to analyze various aerosol characteristics in the central and eastern IGB region, represented by Kanpur and Gandhi College, respectively, and their impacts on climate in terms of radiative forcing. Monthly mean aerosol optical depth (AOD at 500 nm) and corresponding Angstrom Exponent (AE at 440–870 nm, given within the brackets) was observed to be about 0.50 (0.49) and 0.51 (0.65) in April, 0.65 (0.74) and 0.67 (0.91) in May and 0.69 (0.45) and 0.77 (0.71) in June at Kanpur and Gandhi College, respectively. Results show a positive gradient in AOD and AE from central to eastern IGB region with the advancement of the pre-monsoon, which may be caused due to diverse geographical location of the stations having different meteorological conditions and emission sources. Relatively lower SSA was observed at the eastern IGB (0.89) than the central IGB (0.92) region during the period, which suggests relative dominance of absorbing aerosols at the eastern IGB as compared to central IGB region. The absorbing aerosol optical properties over the station suggest that the atmospheric absorption over central IGB region is mainly due to dominance of coarse-mode dust particles; however, absorption over eastern IGB region is mainly due to dominance of fine-particle pollution. The derived properties from sun/sky radiometer during pre-monsoon period are used in a radiative-transfer model to estimate aerosol radiative forcing at the top-of-the atmosphere (TOA) and at the surface over the IGB region. Relatively large TOA and surface cooling was observed at the eastern IGB as compared to the central IGB region. This translates into large heating of the atmosphere ranging from 0.45 to 0.55 K day−1 at Kanpur and from 0.45 to 0.59 K day−1 at Gandhi College.

scholarly journals A simple model for cloud radiative forcing

2009 ◽  
Vol 9 (15) ◽  
pp. 5751-5758 ◽  
Author(s):  
T. Corti ◽  
T. Peter
Keyword(s):  
Energy Balance ◽  
Simple Model ◽  
Radiative Transfer ◽  
Radiative Forcing ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Cloud Radiative Forcing ◽  
Wide Range ◽  
Model Equations ◽  
Better Than

Abstract. We present a simple model for the longwave and shortwave cloud radiative forcing based on the evaluation of extensive radiative transfer calculations, covering a global range of conditions. The simplicity of the model equations fosters the understanding on how clouds affect the Earth's energy balance. In comparison with results from a comprehensive radiative transfer model, the accuracy of our parameterization is typically better than 20%. We demonstrate the usefulness of our model using the example of tropical cirrus clouds. We conclude that possible applications for the model include the convenient estimate of cloud radiative forcing for a wide range of conditions, the evaluation of the sensitivity to changes in environmental conditions, and as a tool in education. An online version of the model is available at http://www.iac.ethz.ch/url/crf.

Sign in / Sign up

Export Citation Format

Share Document