Evaluation of the performance of WRF model in extreme precipitation estimation concerning the changing model configuration and the spatial and temporal variations

Author(s):  
Eren Duzenli ◽  
Heves Pilatin ◽  
Ismail Yucel ◽  
Berina M. Kilicarslan ◽  
M. Tugrul Yilmaz

<p>Global numerical weather prediction models (NWP) such as the European Centre for Medium-Range Weather Forecasts (ECMWF) and Global Forecast System (GFS) generate atmospheric data for the entire world. However, these models provide the data at large spatiotemporal resolutions because of computational limitations. Weather Research and Forecasting (WRF) Model is one of the models, which is capable of dynamically downscaling the NWP models’ output. In this study, all combinations of 4 microphysics and 3 cumulus parametrization schemes, 2 planetary boundary layers (PBL), 2 initial and lateral boundary conditions and 2 horizontal grid spacing (i.e., an ensemble consisting of 96 different scenarios) are simulated to measure the sensitivity of WRF-derived precipitation against different model configurations. The sensitivity analyses are performed for 4 separate events. These events are selected among the extreme precipitation events in the Mediterranean (MED) and eastern Black Sea (EBLS) regions. For each region, a summer and an autumn event are chosen. Here, the fundamental aim is to determine the spatiotemporal differences in WRF input parameters that yield better outcomes. A total of 72 hours simulations are started 24 hours before the event day to avoid spin-up time error. The model is adjusted to produce hourly precipitation outputs. The relative performance of scenarios is measured using Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method considering 5 categorical validation indices and 4 pairwise statistics calculated between the model estimations and the ground-based precipitation observations. According to the TOPSIS results, microphysics scheme, initial and lateral boundary condition, and horizontal grid spacing are substantially influential on WRF precipitation estimates, while cumulus parameterization has a comparatively low effect. The choice of PBL scheme is essential for the summer events, but the results of the autumn events are independent of PBL selection. WRF products are better for the events of the EBLS basin when ERA5 is used as the initial and lateral boundary condition. On the contrary, GFS is superior in the MED region. In terms of spatial resolution, 9 km horizontal grid spacing is commonly preferable for all the events rather than 3 km. Besides, the model underestimates the area-averaged precipitation amounts except for the MED-autumn incident. Still, the model is successful at catching the peak hours of all events. Moreover, the precipitation detection ability of WRF is better for the autumn months. The probability of detection index is higher than 0.5 at 35% of MED stations and 68% of EBLS stations for the autumn events. The local and convective summer events are investigated considering the event centers. Albeit relatively low relationships are defined for the MED-summer event, a statistically significant correlation is obtained between the central station of the EBLS-summer event and the closest grid for the predictions of 52 scenarios (i.e., 54% of the ensemble).</p>

Author(s):  
A. Roy ◽  
P. K. Thakur ◽  
N. Pokhriyal ◽  
S. P. Aggarwal ◽  
B. R. Nikam ◽  
...  

<p><strong>Abstract.</strong> Extreme precipitation events are responsible for major floods in any part of the world. In recent years, simulations and projection of weather conditions to future, with Numerical Weather Prediction (NWP) models like Weather Research and Forecast (WRF), has become an imperative component of research in the field of atmospheric science and hydrology. The validation of modelled forecast is thus have become matter of paramount importance in case of forecasting. This study delivers an all-inclusive assessment of 5 high spatial resolution gridded precipitation products including satellite data products and also climate reanalysis product as compared to WRF precipitation product. The study was performed in river basins of North Western Himalaya (NWH) in India. Performance of WRF model is evaluated by comparing with observational gridded (0.25&amp;deg;<span class="thinspace"></span>&amp;times;<span class="thinspace"></span>0.25&amp;deg;) precipitation data from Indian Meteorological Department (IMD). Other products include TRMM Multi Satellite Precipitation Analysis (TMPA) 3B42-v7 product (0.25&amp;deg;<span class="thinspace"></span>&amp;times;<span class="thinspace"></span>0.25&amp;deg;) and Global Precipitation Measurement (GPM) product (0.1&amp;deg;<span class="thinspace"></span>&amp;times;<span class="thinspace"></span>0.1&amp;deg;). Moreover, climate reanalysis rainfall product from ERA Interim is also used. Bias, Mean Absolute Error, Root Mean Square Error, False Alarm Ratio (FAR), Probability of False Detection (POFD), and Probability of Detection (POD) were calculated with particular rainfall thresholds. TRMM and GPM products were found to be sufficiently close to the observations. All products showed better performance in the low altitude areas i.e. in planes of Upper Ganga and Yamuna basin and Indus basin, and increase in error as topographical variation increases. This study can be used for identifying suitability of WRF forecast data and assessing performance of other rainfall datasets as well.</p>


2014 ◽  
Vol 29 (4) ◽  
pp. 894-911 ◽  
Author(s):  
Ellen M. Sukovich ◽  
F. Martin Ralph ◽  
Faye E. Barthold ◽  
David W. Reynolds ◽  
David R. Novak

Abstract Extreme quantitative precipitation forecast (QPF) performance is baselined and analyzed by NOAA’s Hydrometeorology Testbed (HMT) using 11 yr of 32-km gridded QPFs from NCEP’s Weather Prediction Center (WPC). The analysis uses regional extreme precipitation thresholds, quantitatively defined as the 99th and 99.9th percentile precipitation values of all wet-site days from 2001 to 2011 for each River Forecast Center (RFC) region, to evaluate QPF performance at multiple lead times. Five verification metrics are used: probability of detection (POD), false alarm ratio (FAR), critical success index (CSI), frequency bias, and conditional mean absolute error (MAEcond). Results indicate that extreme QPFs have incrementally improved in forecast accuracy over the 11-yr period. Seasonal extreme QPFs show the highest skill during winter and the lowest skill during summer, although an increase in QPF skill is observed during September, most likely due to landfalling tropical systems. Seasonal extreme QPF skill decreases with increased lead time. Extreme QPF skill is higher over the western and northeastern RFCs and is lower over the central and southeastern RFC regions, likely due to the preponderance of convective events in the central and southeastern regions. This study extends the NOAA HMT study of regional extreme QPF performance in the western United States to include the contiguous United States and applies the regional assessment recommended therein. The method and framework applied here are readily applied to any gridded QPF dataset to define and verify extreme precipitation events.


2020 ◽  
Vol 12 (10) ◽  
pp. 1630
Author(s):  
Pedro A. Jiménez

Cloud initialization is a challenge in numerical weather prediction. Probably the most relevant observations for this task come from geostationary satellites. These satellites provide the cloud mask with high spatio-temporal resolution and low latencies. The low latency is an attractive option for nowcasting systems such as the solar irradiance nowcasting model MAD-WRF. In this study we examine the potential of using the cloud mask from the GOES-16 satellite over the contiguous U.S. for this particular application. With this aim, the GOES-16 cloud mask product is compared against CALIPSO retrievals during a two year period. Both the GOES-16 data and the CALIPSO retrievals are interpolated to a grid that covers the contiguous U.S. at 9 km of horizontal grid spacing that is being used in MAD-WRF nowcasts. Results indicate a probability of detection, or accuracy, of all sky conditions of 86.0%. However, the accuracy is higher for cloud detections, 90.9% than for clear sky detections 74.8%. The lower performance of clear sky retrievals is a result of missdetections during daytime. This is especially clear for summer, and for regions to the north of parallel 36 during winter. However, regions to the south of parallel 36 show acceptable performance during both daytime and nighttime. It is over these regions wherein the cloud mask product should show its largest potential to enhance the cloud initialization in the MAD-WRF model.


2016 ◽  
Vol 31 (6) ◽  
pp. 1997-2017 ◽  
Author(s):  
Jamie Dyer ◽  
Christopher Zarzar ◽  
Philip Amburn ◽  
Robert Dumais ◽  
John Raby ◽  
...  

Abstract Numerical weather prediction (NWP) models are limited with respect to initial and boundary condition data and possess an incomplete description of underlying physical processes. To account for this, modelers have adopted the method of ensemble prediction to quantify the uncertainty within a model framework; however, the generation of ensemble members requires considerably more computational time and/or resources than a single deterministic simulation, especially at convection-allowing horizontal grid spacings. One approach to solving this issue is the development of both a large and small horizontal grid spacing model framework over the same domain for ensemble and deterministic simulations, respectively. This approach assumes that model grid spacing has no influence on model uncertainty; therefore, the objective of this paper is to quantify the influence of horizontal grid spacing on the statistical spread of NWP model ensembles over a regional domain. A series of 24-h simulations using the Weather Research and Forecast (WRF) Model are generated over a static domain with horizontal grid spacings of 35, 25, 15, and 9 km, using both a stochastic kinetic energy backscatter scheme and a multiphysics ensemble approach. Results indicate that horizontal grid spacing does influence the magnitude of uncertainty within an ensemble, although the exact magnitude and type of statistical relationship (direct versus inverse) varies by case. As such, at shorter lead times (&lt;12 h) the dominant atmospheric process associated with each event and the type of ensemble being used outweigh the individual impacts of horizontal grid spacing on ensemble spread.


2013 ◽  
Vol 26 (21) ◽  
pp. 8671-8689 ◽  
Author(s):  
Kelly Mahoney ◽  
Michael Alexander ◽  
James D. Scott ◽  
Joseph Barsugli

Abstract A high-resolution case-based approach for dynamically downscaling climate model data is presented. Extreme precipitation events are selected from regional climate model (RCM) simulations of past and future time periods. Each event is further downscaled using the Weather Research and Forecasting (WRF) Model to storm scale (1.3-km grid spacing). The high-resolution downscaled simulations are used to investigate changes in extreme precipitation projections from a past to a future climate period, as well as how projected precipitation intensity and distribution differ between the RCM scale (50-km grid spacing) and the local scale (1.3-km grid spacing). Three independent RCM projections are utilized as initial and boundary conditions to the downscaled simulations, and the results reveal considerable spread in projected changes not only among the RCMs but also in the downscaled high-resolution simulations. However, even when the RCM projections show an overall (i.e., spatially averaged) decrease in the intensity of extreme events, localized maxima in the high-resolution simulations of extreme events can remain as strong or even increase. An ingredients-based analysis of prestorm instability, moisture, and forcing for ascent illustrates that while instability and moisture tend to increase in the future simulations at both regional and local scales, local forcing, synoptic dynamics, and terrain-relative winds are quite variable. Nuanced differences in larger-scale and mesoscale dynamics are a key determinant in each event's resultant precipitation. Very high-resolution dynamical downscaling enables a more detailed representation of extreme precipitation events and their relationship to their surrounding environments with fewer parameterization-based uncertainties and provides a framework for diagnosing climate model errors.


Atmosphere ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 462 ◽  
Author(s):  
Janice Coen ◽  
Wilfrid Schroeder ◽  
Brad Quayle

On 8–9 October 2017, fourteen wildfires developed rapidly during a strong Diablo wind event in northern California including the Tubbs Fire, which travelled over 19 km in 3.25 h. Here, we applied the CAWFE® coupled numerical weather prediction-fire modeling system to investigate the airflow regime and extreme wind peaks underlying the extreme fire behavior using simulations that refine from a 10 km to a 185 m horizontal grid spacing. We found that as Diablo winds travelled south down the Sacramento Valley and fanned out southwestward over the Wine Country, their strength waxed and waned and their direction wavered, creating varying locations near fire origins where wind overrunning topography reached 30–40 m/s, along with streaks and bursts of strong winds in the lee of some topographic features and stagnation downstream of others. Despite a statically stable layer in the lowest 1.5 km, the high Froude number flow sometimes resembled a hydraulic jump. Elsewhere, the flow behaved similarly to neutrally-stratified flow over small hills, creating wind extrema that exceeded 40 m/s at the crest of some lesser hills including near the Tubbs fire ignition, but which shed bursts of high speed winds that travel downstream at approximately 5–7-min intervals. Nonetheless, simulated fire growth lagged satellite detection of fire arrival in Santa Rosa by up to 1 h, although whether the data detect fire line or spotting is ambiguous. A forecast simulation with a 370 m horizontal grid spacing produced an on-time fire line arrival in Santa Rosa, with calculations executed 4 times faster than real time on a single computer processor.


2020 ◽  
Author(s):  
Corinna Hoose ◽  
Hyunju Jung ◽  
Peter Knippertz ◽  
Tijana Janjic ◽  
Yvonne Ruckstuhl ◽  
...  

&lt;p&gt;&lt;span&gt;&lt;span&gt;Tropical weather prediction remains one of the main challenges in atmospheric science due to a combination of insufficient observations, data assimilation algorithms optimized for midlatitudes and large model errors.&amp;#160;Due to a strong dependency of many people in the tropics on rainfall variability, combined with a high vulnerability, improved precipitation forecasts have the potential to create substantial benefits in areas such as agriculture, water management, energy production and disease prevention.&lt;/span&gt;&lt;/span&gt;&lt;/p&gt;&lt;p&gt;&lt;span&gt;&lt;span&gt;Recent studies found that the coupling of equatorial waves&amp;#160;to convection is key to improving weather forecasts in the tropics on the synoptic to subseasonal timescale but many models struggle to realistically represent this coupling. Here we use aquaplanet simulations with the ICOsahedral Nonhydrostatic (ICON) model with a 13 km horizontal grid spacing to study the underlying mechanisms of convectively coupled equatorial waves in an idealized framework. We filter the divergence at 200 hPa using a standard wave filtering tool tapering to zero that allows us to identify dynamical characteristics of convectively coupled waves in our simulations. To diagnose thermodynamical aspects of wave-convection couplings, we compare the obtained waves to the total precipitable water and analyze the spatial variance of the budget analysis for column-integrated moist static energy. The same filtering tool and diagnostics are carried out on a realistic ICON simulation with a 2.5 km horizontal grid spacing from the DYnamics of the Atmospheric general circulation Modeled On Non-hydrostatic Domains (DYAMOND) project.&lt;/span&gt;&lt;/span&gt;&lt;/p&gt;&lt;p&gt;&lt;span&gt;&lt;span&gt;In the future we plan to run and analyze idealized tropical channel simulations with 2.5 km horizontal resolution, i.e. using the same grid spacing as in the DYAMOND simulation. The comparison between the idealized and the realistic simulations identifies mechanisms&amp;#160;of wave-convection coupling. In addition, we will apply this set of diagnostics to forecast experiments using different approaches of data assimilation.&lt;/span&gt;&lt;/span&gt;&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;


2014 ◽  
Vol 29 (5) ◽  
pp. 1143-1154 ◽  
Author(s):  
Kyo-Sun Sunny Lim ◽  
Song-You Hong ◽  
Jin-Ho Yoon ◽  
Jongil Han

Abstract The most recent version of the simplified Arakawa–Schubert (SAS) cumulus scheme in the National Centers for Environmental Prediction (NCEP) Global Forecast System (GFS) (GFS SAS) is implemented in the Weather Research and Forecasting (WRF) Model with a modification of the triggering condition and the convective mass flux in order to make it dependent on the model’s horizontal grid spacing. The East Asian summer monsoon season of 2006 is selected in order to evaluate the performance of the modified GFS SAS scheme. In comparison to the original GFS SAS scheme, the modified GFS SAS scheme shows overall better agreement with the observations in terms of the simulated monsoon rainfall. The simulated precipitation from the original GFS SAS scheme is insensitive to the model’s horizontal grid spacing, which is counterintuitive because the portion of the resolved clouds in a grid box should increase as the model grid spacing decreases. This behavior of the original GFS SAS scheme is alleviated by the modified GFS SAS scheme. In addition, three different cumulus schemes (Grell and Freitas, Kain and Fritsch, and Betts–Miller–Janjić) are chosen to investigate the role of a horizontal resolution on the simulated monsoon rainfall. Although the forecast skill of the surface rainfall does not always improve as the spatial resolution increases, the improvement of the probability density function of the rain rate with the smaller grid spacing is robust regardless of the cumulus parameterization scheme.


Sign in / Sign up

Export Citation Format

Share Document