3-D Geoelectrical Characterisation of the Central Volcanoes of São Miguel Island (Azores Archipelago, Portugal) using Broad-Band Magnetotelluric Data

Author(s):  
Duygu Kiyan ◽  
Colin Hogg ◽  
Volker Rath ◽  
Andreas Junge ◽  
Rita Carmo ◽  
...  

<p>The Azores islands are located at the triple junction between the North American, Eurasian and African plates. The Mid-Atlantic Ridge separates the North America from Eurasia and African plates, while Azores-Gibraltar Fracture Zone is the boundary between Eurasia and African plates. São Miguel Island, situated at the southeastern part of the western segment of the Azores-Gibraltar Fracture Zone, has three active strato-volcanoes, Sete Cidades, Fogo (Água de Pau), and Furnas. At Furnas and Fogo volcanoes, intense circulation of volcanic fluids at depth leads to high CO<sub>2</sub> outgassing and flank destabilisation, whereas its neighbour Congro Fissural volcanic system, located between Fogo and Furnas volcanoes, experiences significant seismic swarm activity and poses considerable threat to the local population. Enhanced electrical conductivity values are typically associated with volcanic-hydrothermal systems and the modelled conductivity structures can provide constraints on these volcanic and hydrothermal processes.</p><p>Our previous work on Furnas volcano, which yielded a revised conceptual model developed from 39 high-frequency magnetotelluric soundings that imaged the hydrothermal system of the volcano to a depth of 1 km directly beneath the caldera, has now been expanded to include 35 additional broad-band magnetotelluric soundings from a recent field campaign conducted in late 2018, to image deeper and broader to gain new insights into the regional context of the Furnas volcanic system. The resistivity model of Furnas shallow hydrothermal system constructed from high-frequency dataset delineated two enhanced conductive zones, one at 100 m and another at 500 m depth, separated by a resistive layer. The shallow conductor has conductivity less than 1 S/m, which can be explained by clay mineral surface conduction with a mass fraction of at least 20% smectite. The deeper conductor extends across the majority of the survey area and is located at depths where smectite is generally not formed. We interpret this as the result of saline aqueous fluids near the boiling point, inferring temperatures of at least 240 <sup>o</sup>C. The less conductive layer found between these conductors is interpreted to be steam-dominated and coincides within the mixed-clay zone found in many volcanic hydrothermal systems. 3-D inversions using the deep-probing data indicate continuation of a strong conductive zone towards the south, beneath the 1630 Dome, which represents the most recent phase of eruptive activity in the multi-caldera complex. During the 2018 field campaign, we have enlarged our study to include 50 broad-band soundings on the adjacent Fogo (Água de Pau) volcano and Congro Fissural volcanic system. The Fogo-Congro region is subjected to seismic swarm activity and its relationship with the geoelectrical structure is being investigated.</p>

1995 ◽  
Vol 32 (9) ◽  
pp. 1365-1377 ◽  
Author(s):  
R. L. Kellett

A cross section of the resistivity structure through the Lac Bouchette gabbro–anorthosite provides a new image of the thin-skinned geometry of an allochthonous terrane in the western Grenville Province of Canada. Two-dimensional inversion of high-frequency magnetotelluric soundings and magnetic modelling indicate that the gabbro–anorthosite is a 1.5 km thick slice bounded by conductive thrust faults. Graphite, which is present at the margins of the gabbro–anorthosite and in the metasedimentary Réservoir Cabonga terrane to the south, is the most likely source of the enhanced electrical conductivity in the fault zones. The southern margin of the gabbro–anorthosite dips at about 15° to the south beneath the Réservoir Cabonga terrane. The gabbro–anorthosite can be divided into a highly magnetic gabbroic body in the south, a less magnetic metagabbro in the north, and a thin anorthositic lense in the centre. The combination of closely spaced magnetotelluric soundings and magnetic modelling provides independent constraints for gravity and seismic reflection studies in progress. The geometry of the Lac Bouchette gabbro–anorthosite, revealed by this geophysical study, supports a hypothesis that some gabbro–anorthosites behave as competent blocks adjacent to the major tectonic boundaries of the Grenville Province.


2020 ◽  
Author(s):  
Sandro de Vita ◽  
Mauro A. Di Vito ◽  
Enrica Marotta ◽  
Rosario Avino ◽  
Antonio Carandente ◽  
...  

<p>The volcanic system of Ischia is characterized by an intense hydrothermal activity, documented since the early 16th century by the study of Iasolino (1588), which represents the first systematic analysis of the thermal springs of the island for therapeutic purposes. Later studies partially contributed to the enhancement of knowledge on the volcanic, hydrogeological and hydrothermal features of the island, highlighting the strong interaction between hydrothermal flowpaths and volcano-tectonic processes . The reconstruction of the hydrothermal system becomes, therefore, a fundamental element for territorial planning, not only in terms of management of the huge water and geothermal resource, but also and above all in a perspective of prevention and mitigation of volcanic risk. Thermal springs, fumaroles and clay deposits due to the hydrothermal alteration of volcanic products testifies for the existence of an active deep hydrothermal system. Commonly, the geochemical characterization of fluids and groundwater has been used for the definition of the origin and structure of hydrothermal systems, when hydrogeological information is incomplete. However, volcanic hydrothermal systems, such as that characterizes the island of Ischia, are particularly difficult to analyze and outline, as the groundwater resources are the result of an articulated and dynamic interaction among meteoric water, sea water and fluids of deep origin. In such cases, the need for an interdisciplinary approach is evident, involving knowledge and research methods ranging from geology to volcanology, geophysics, geochemistry and hydrogeology. With particular reference to the functional and structural representation of the geothermal system of the island of Ischia and the resulting correlations with the volcano-tectonic processes, the examination of previous information highlights the need to update and improve the knowledge on groundwater hydrodynamics and mineralization processes.</p><p>Therefore, this study represents the result of  a strong interdisciplinary action that, starting from the design and implementation of a database on the existing geological/volcanological and hydrogeological information, contributes to highlight the critical issues, defines an operating scheme of the hydro-geo-thermal system of the island of Ischia, and aims at upgrade its hydrogeological, geochemical and volcanic monitoring system, in order to contribute to the mitigation of natural risks.</p><p>Moreover, this study well fits into the framework of the ongoing researches on volcanic hazard at Ischia and is integrated with the actions planned by the Italian Department of Civil Defense. The knowledge of groundwater dynamics and pathways is of fundamental importance for understanding the water/magma interaction processes in case of re-alimentation of the shallow magmatic system, and the assessment of the possibility of phreatic explosions occurrence.</p><p> </p>


2020 ◽  
Author(s):  
Dinko Sindija ◽  
Jurgen Neuberg

<p>The signals preceding and accompanying phreatic eruptions, although observed on many volcanoes, are still not very well understood. As this type of eruption can have severe consequences, we need to understand the processes and the observed seismic signals leading up to these eruptions. Using seismic broadband instruments, we can detect signals in a wide frequency range, and careful analysis and modelling of these data can help us understand these processes. Phreatic eruptions are often accompanied, and sometimes preceded, by Very Long Period (VLP) seismic signals. These signals are caused by sudden pressure changes inside the volcanic system and in hydrothermal environments these pressure changes and, therefore, observed VLPs are attributed to the sudden expansion of water-filled cracks by vapourisation due to heat flow from the underlying magma body. <br>However previous studies consider pure water-water systems which sometimes assume unrealistic pressure-temperature changes in the system to produce a violent phase change from water to vapour. As there are instances of significant amounts of CO<sub>2</sub> measured within hydrothermal systems, we model how a sudden injection of CO<sub>2</sub> into the hydrothermal system, which would easily allow for explosive phase change could trigger the observed VLPs. Further, we show how poroelastic medium responds to such a source.</p>


2020 ◽  
Vol 224 (3) ◽  
pp. 1684-1704
Author(s):  
Alexandra Mauerberger ◽  
Valérie Maupin ◽  
Ólafur Gudmundsson ◽  
Frederik Tilmann

SUMMARY We use the recently deployed ScanArray network of broad-band stations covering most of Norway and Sweden as well as parts of Finland to analyse the propagation of Rayleigh waves in Scandinavia. Applying an array beamforming technique to teleseismic records from ScanArray and permanent stations in the study region, in total 159 stations with a typical station distance of about 70 km, we obtain phase velocities for three subregions, which collectively cover most of Scandinavia (excluding southern Norway). The average phase dispersion curves are similar for all three subregions. They resemble the dispersion previously observed for the South Baltic craton and are about 1 per cent slower than the North Baltic shield phase velocities for periods between 40 and 80 s. However, a remarkable sin(1θ) phase velocity variation with azimuth is observed for periods >35 s with a 5 per cent deviation between the maximum and minimum velocities, more than the overall lateral variation in average velocity. Such a variation, which is incompatible with seismic anisotropy, occurs in northern Scandinavia and southern Norway/Sweden but not in the central study area. The maximum and minimum velocities were measured for backazimuths of 120° and 300°, respectively. These directions are perpendicular to a step in the lithosphere–asthenosphere boundary (LAB) inferred by previous studies in southern Norway/Sweden, suggesting a relation to large lithospheric heterogeneity. In order to test this hypothesis, we carried out 2-D full-waveform modeling of Rayleigh wave propagation in synthetic models which incorporate a steep gradient in the LAB in combination with a pronounced reduction in the shear velocity below the LAB. This setup reproduces the observations qualitatively, and results in higher phase velocities for propagation in the direction of shallowing LAB, and lower ones for propagation in the direction of deepening LAB, probably due to the interference of forward scattered and reflected surface wave energy with the fundamental mode. Therefore, the reduction in lithospheric thickness towards southern Norway in the south, and towards the Atlantic ocean in the north provide a plausible explanation for the observed azimuthal variations.


Author(s):  
Hsin-Fu Yeh ◽  
Hung-Hsiang Hsu

The Tatun Volcano Group (TVG) is located in northern Taiwan and consists of many springs and fumaroles. The Tayukeng (TYK) area is the most active fumarole site in the TVG. In this study, we analyzed the long-term geochemical variations of hydrothermal fluids and proposed a mechanism responsible for the variation in TYK. There are two different aquifers beneath the TYK area: a shallow SO42−-rich aquifer and a deeper aquifer rich in Cl−. TYK thermal water was mainly supplied by the shallow SO42−-rich aquifer; therefore, the thermal water showed high SO42− concentrations. After 2015, the inflow of deep thermal water increased, causing the Cl− concentrations of the TYK to increase. Notably, the inferred reservoir temperatures based on quartz geothermometry increased; however, the surface temperature of the spring decreased. We inferred that the enthalpy was lost during transportation to the surface. Therefore, the surface temperature of the spring does not increase with an increased inflow of deep hydrothermal fluid. The results can serve as a reference for understanding the complex evolution of the magma-hydrothermal system in the TVG.


The Holocene ◽  
2011 ◽  
Vol 21 (7) ◽  
pp. 1037-1048 ◽  
Author(s):  
Bergrún Arna Óladóttir ◽  
Olgeir Sigmarsson ◽  
Gudrún Larsen ◽  
Jean-Luc Devidal

The Holocene eruption history of subglacial volcanoes in Iceland is largely recorded by their tephra deposits. The numerous basaltic tephra offer the possibility to make the tephrochronology in the North Atlantic area more detailed and, therefore, more useful as a tool not only in volcanology but also in environmental and archaeological studies. The source of a tephra is established by mapping its distribution or inferred via compositional fingerprinting, mainly based on major-element analyses. In order to improve the provenance determinations for basaltic tephra produced at Grímsvötn, Bárdarbunga and Kverkfjöll volcanic systems in Iceland, 921 samples from soil profiles around the Vatnajökull ice-cap were analysed for major-element concentrations by electron probe microanalysis. These samples are shown to represent 747 primary tephra units. The tephra erupted within each of these volcanic system has similar chemical characteristics. The major-element results fall into three distinctive compositional groups, all of which show regular decrease of MgO with increasing K2O concentrations. The new analyses presented here considerably improve the compositional distinction between products of the three volcanic systems. Nevertheless, slight overlap of the compositional groups for each system still remains. In situ trace-element analyses by laser-ablation-inductively-coupled-plasma-mass-spectrometry were applied for better provenance identification for those tephra having similar major-element composition. Three trace-element ratios, Rb/Y, La/Yb and Sr/Th, proved particularly useful. Significantly higher La/Yb distinguishes the Grímsvötn basalts from those of Bárdarbunga and Rb/Y values differentiate the basalts of Grímsvötn and Kverkfjöll. Additionally, the products of Bárdarbunga, Grímsvötn and Kverkfjöll form distinct compositional fields on a Sr/Th versus Th plot. Taken together, the combined use of major- and trace-element analyses in delineating the provenance of basaltic tephra having similar major-element composition significantly improves the Holocene tephra record as well as the potential for correlations with tephra from outside Iceland.


2021 ◽  
Author(s):  
Anton Nuzhdaev

<p>The study of mercury receipt within volcanic activity zones and large hydrothermal systems recently causes the big interest connected with attempts of an estimation of volumes of natural mercury receipt on a daily surface.</p><p>The hydrothermal system connected with volcanic massif Big Semyachik is one of the largest on the territory of Kamchatka peninsula. On the surface, the hydrothermal system is manifested by three large hydrothermal fields - the Verhnee Field, the parychay Dolina, and the Northern Crater of the Central Semyachik, the heat export from which is estimated at 300 MW (Vakin, 1976). On the surface of the thermal fields hot thermal waters and powerful steam-gas jets are unloaded.  At the same time, due to the inaccessibility of thermal fields remain poorly studied, and in particular, there is no information on the concentrations of mercury in hydrothermal solutions.</p><p>During fieldwork in 2020 all types of thermal waters were sampled, chemical types of waters were established, concentrations of mercury in hydrothermal solutions: for hot thermal waters the average value of mercury was - 0.44 mcg / L, and in steam-gas jets - the average value of mercury was - 4.60 mcg / L.</p><p>Thus, in the course of the work the data on concentrations of mercury in hydrothermal solutions of one of the largest hydrothermal systems of Kamchatka were received for the first time.</p><p> </p>


1980 ◽  
Vol 70 (4) ◽  
pp. 1199-1223
Author(s):  
Robert E. Wallace ◽  
Ta-Liang Teng

abstract On August 16, 22, and 23, 1976, a succession of three large earthquakes (M = 7.2, 6.8, 7.2) occurred in the Sungpan-Pingwu area of Szechuan Province, People's Republic of China. Their successful predictions resulted in a substantial reduction in the loss of lives. The epicenters of these events progressed from north to south along the Huya Fault, a NNW-striking fault between the NE-trending Lungmenshan fracture zone and the north-trending Mienchiang fracture zone in western Szechuan. The greatest intensity reported was IX; isoseismals were crudely elliptical with the long axis parallel to the trend of the Huya Fault. The predictions were made with a reasonably good magnitude window (less than 0.5 magnitude unit), a rather large space window (about 150 km ×150 km), and a remarkably good time window (within a day). The detailed prediction process began with field monitoring some 6 yr before the Sungpan-Pingwu events and ended with the final issuance of warning and mass evacuation. During the few weeks preceding the earthquakes, about 1,300 observations of noninstrumental anomalies and precursory phenomena were reported by scientists and lay brigades: outgassings, fireballs and other earthquake lights, abnormal animal and plant behavior, and telluric currents.


2014 ◽  
Vol 7 (11) ◽  
pp. 3917-3926 ◽  
Author(s):  
J. M. Intrieri ◽  
G. de Boer ◽  
M. D. Shupe ◽  
J. R. Spackman ◽  
J. Wang ◽  
...  

Abstract. In February and March of 2011, the Global Hawk unmanned aircraft system (UAS) was deployed over the Pacific Ocean and the Arctic during the Winter Storms and Pacific Atmospheric Rivers (WISPAR) field campaign. The WISPAR science missions were designed to (1) mprove our understanding of Pacific weather systems and the polar atmosphere; (2) evaluate operational use of unmanned aircraft for investigating these atmospheric events; and (3) demonstrate operational and research applications of a UAS dropsonde system at high latitudes. Dropsondes deployed from the Global Hawk successfully obtained high-resolution profiles of temperature, pressure, humidity, and wind information between the stratosphere and surface. The 35 m wingspan Global Hawk, which can soar for ~ 31 h at altitudes up to ~ 20 km, was remotely operated from NASA's Dryden Flight Research Center at Edwards Air Force Base (AFB) in California. During the 25 h polar flight on 9–10 March 2011, the Global Hawk released 35 sondes between the North Slope of Alaska and 85° N latitude, marking the first UAS Arctic dropsonde mission of its kind. The polar flight transected an unusually cold polar vortex, notable for an associated record-level Arctic ozone loss, and documented polar boundary layer variations over a sizable ocean–ice lead feature. Comparison of dropsonde observations with atmospheric reanalyses reveal that, for this day, large-scale structures such as the polar vortex and air masses are captured by the reanalyses, while smaller-scale features, including low-level jets and inversion depths, are mischaracterized. The successful Arctic dropsonde deployment demonstrates the capability of the Global Hawk to conduct operations in harsh, remote regions. The limited comparison with other measurements and reanalyses highlights the potential value of Arctic atmospheric dropsonde observations where routine in situ measurements are practically nonexistent.


2007 ◽  
Vol 24 (2) ◽  
pp. 270-284 ◽  
Author(s):  
Harvey E. Seim ◽  
Catherine R. Edwards

Abstract Simultaneous ADCP profile measurements are compared over a 2-month period in late 2003. One set of measurements comes from a National Data Buoy Center (NDBC) buoy-mounted ADCP, the other from a bottom-mounted, upward-looking ADCP moored roughly 500 m from the buoy. The study was undertaken to evaluate the proficiency of an experimental configuration by NDBC; unfortunately, the ADCP was not optimally configured. The higher temporally and vertically resolved bottom-mounted ADCP data are interpolated in time and depth to match the buoy-mounted ADCP measurements. It is found that the two ADCP measurements are significantly different. The buoy-mounted measurements are affected by high-frequency (<10 h period) noise that is vertically coherent throughout the profiles. This noise results in autospectra that are essentially white, unlike the classic red spectra formed from the bottom-mounted ADCP observations. The spectra imply a practical noise floor of 0.045 m s−1 for the buoy-mounted system. Contamination by surface waves is the likely cause of this problem. At tidal frequencies the buoy-mounted system underestimates major axis tidal current magnitude by 10%–40%; interference from the buoy chain and/or fish or plankton are considered the most likely cause of the bias. The subtidal velocity field (periods greater than 40 h) is only partially captured; the correlation coefficient for the east–west current is 0.49 and for the north–south current is 0.64.


Sign in / Sign up

Export Citation Format

Share Document