Revealing small scale dynamics at the altitude of noctilucent clouds

2020 ◽  
Author(s):  
Gerd Baumgarten ◽  
Jorge Chau ◽  
Jens Fiedler ◽  
Michael Gerding ◽  
Franz-Josef Lübken ◽  
...  
Keyword(s):  
Gravity Waves ◽  
Large Scale ◽  
Classification Scheme ◽  
Small Scale ◽  
Noctilucent Clouds ◽  
Naked Eye ◽  
Scale Structures ◽  
Large Scale Flow ◽  
Microphysical Processes ◽  
Vertical Scales

<p>Observing noctilucent clouds (NLC) by lidar and camera from ground reveals smallest scale structures of tens of meters and their evolution in the vertical and horizontal direction.<br>At the altitude of nocltilucent clouds (approx. 83 km) these structures are generated by microphysical processes affecting the ice particles, pure fluid dynamics, or a combination of both. On centennial time scales the NLC are linked to microphysical changes, mostly induced by changes of the available water vapor. On scales of hours to days the clouds are linked to temperature or the large scale flow. On scales of minutes the structures are often wave-like and associated with gravity waves and turbulence. <br>For timescales below a few minutes only sparse observations were previously available. To systematically investigate the structure of NLC on such scales we make use of the ALOMAR RMR-lidar, located in Northern Norway at 69°N, that is detecting NLC with sub-second resolution since 2011. We have developed a classification scheme to identify the most important features on timescales of a few seconds. <br>Furthermore we use a combination of lidar, radar and camera that allows studying simultaneously the horizontal and vertical scales. We will present new results from lidars and cameras that look at noctilucent clouds above ALOMAR and Kühlungsborn (54°N) with different scattering angles. The observations are used to investigate the mechanisms that generate the extraordinary appearance of NLC when observed by naked eye. </p>

Modulation of Internal Gravity Waves in a Multiscale Model for Deep Convection on Mesoscales

2010 ◽  
Vol 67 (8) ◽  
pp. 2504-2519 ◽  
Author(s):  
Daniel Ruprecht ◽  
Rupert Klein ◽  
Andrew J. Majda
Keyword(s):  
Gravity Waves ◽  
Large Scale ◽  
Energy Transport ◽  
Deep Convection ◽  
Potential Temperature ◽  
Internal Gravity Waves ◽  
Small Scale ◽  
Closed Model ◽  
Large Scale Flow ◽  
Effective Stability

Abstract Starting from the conservation laws for mass, momentum, and energy together with a three-species bulk microphysics model, a model for the interaction of internal gravity waves and deep convective hot towers is derived using multiscale asymptotic techniques. From the leading-order equations, a closed model for the large-scale flow is obtained analytically by applying horizontal averages conditioned on the small-scale hot towers. No closure approximations are required besides adopting the asymptotic limit regime on which the analysis is based. The resulting model is an extension of the anelastic equations linearized about a constant background flow. Moist processes enter through the area fraction of saturated regions and through two additional dynamic equations describing the coupled evolution of the conditionally averaged small-scale vertical velocity and buoyancy. A two-way coupling between the large-scale dynamics and these small-scale quantities is obtained: moisture reduces the effective stability for the large-scale flow, and microscale up- and downdrafts define a large-scale averaged potential temperature source term. In turn, large-scale vertical velocities induce small-scale potential temperature fluctuations due to the discrepancy in effective stability between saturated and nonsaturated regions. The dispersion relation and group velocity of the system are analyzed and moisture is found to have several effects: (i) it reduces vertical energy transport by waves, (ii) it increases vertical wavenumbers but decreases the slope at which wave packets travel, (iii) it introduces a new lower horizontal cutoff wavenumber in addition to the well-known high wavenumber cutoff, and (iv) moisture can cause critical layers. Numerical examples reveal the effects of moisture on steady-state and time-dependent mountain waves in the present hot-tower regime.

scholarly journals Synoptic Responses to Mountain Gravity Waves Encountering Directional Critical Levels

2007 ◽  
Vol 64 (3) ◽  
pp. 828-848 ◽  
Author(s):  
Armel Martin ◽  
François Lott
Keyword(s):  
Gravity Waves ◽  
General Circulation ◽  
Large Scale ◽  
Baroclinic Instability ◽  
General Circulation Models ◽  
Small Scale ◽  
Mountain Range ◽  
Critical Levels ◽  
Sensitivity Tests ◽  
Large Scale Flow

Abstract A heuristic model is used to study the synoptic response to mountain gravity waves (GWs) absorbed at directional critical levels. The model is a semigeostrophic version of the Eady model for baroclinic instability adapted by Smith to study lee cyclogenesis. The GWs exert a force on the large-scale flow where they encounter directional critical levels. This force is taken into account in the model herein and produces potential vorticity (PV) anomalies in the midtroposphere. First, the authors consider the case of an idealized mountain range such that the orographic variance is well separated between small- and large-scale contributions. In the absence of tropopause, the PV produced by the GW force has a surface impact that is significant compared to the surface response due to the large scales. For a cold front, the GW force produces a trough over the mountain and a larger-amplitude ridge immediately downstream. It opposes somehow to the response due to the large scales of the mountain range, which is anticyclonic aloft and cyclonic downstream. For a warm front, the GW force produces a ridge over the mountain and a trough downstream; hence it reinforces the response due to the large scales. Second, the robustness of the previous results is verified by a series of sensitivity tests. The authors change the specifications of the mountain range and of the background flow. They also repeat some experiments by including baroclinic instabilities, or by using the quasigeostrophic approximation. Finally, they consider the case of a small-scale orographic spectrum representative of the Alps. The significance of the results is discussed in the context of GW parameterization in the general circulation models. The results may also help to interpret the complex PV structures occurring when mountain gravity waves break in a baroclinic environment.

scholarly journals Design of Compliant Joints for Large Scale Structures

2020 ◽  
Author(s):  
Angela Nastevska ◽  
Jovana Jovanova ◽  
Mary Frecker
Keyword(s):  
Large Scale ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Small Scale ◽  
Nonlinear Bending ◽  
Large Scale Structures ◽  
Compliant Joints ◽  
Scale Structures ◽  
High Level ◽  
Novel Design

Abstract Large scale structures can benefit from the design of compliant joints that can provide flexibility and adaptability. A high level of deformation is achieved locally with the design of flexures in compliant mechanisms. Additionally, by introducing contact-aided compliant mechanisms, nonlinear bending stiffness is achieved to make the joints flexible in one direction and stiff in the opposite one. All these concepts have been explored in small scale engineering design, but they have not been applied to large scale structures. In this paper the design of a large scale compliant mechanism is proposed for novel design of a foldable shipping container. The superelasticity of nickel titanium is shown to be beneficial in designing the joints of the compliant mechanism.

Nonlinear dynamics over rough topography: homogeneous and stratified quasi-geostrophic theory

2003 ◽  
Vol 474 ◽  
pp. 299-318 ◽  
Author(s):  
JACQUES VANNESTE
Keyword(s):  
Nonlinear Dynamics ◽  
Large Scale ◽  
Baroclinic Instability ◽  
Small Scale ◽  
Stratified Fluids ◽  
Homogeneous Case ◽  
Bottom Boundary ◽  
One Dimensional ◽  
Averaged Equations ◽  
Large Scale Flow

The weakly nonlinear dynamics of quasi-geostrophic flows over a one-dimensional, periodic or random, small-scale topography is investigated using an asymptotic approach. Averaged (or homogenized) evolution equations which account for the flow–topography interaction are derived for both homogeneous and continuously stratified quasi-geostrophic fluids. The scaling assumptions are detailed in each case; for stratified fluids, they imply that the direct influence of the topography is confined within a thin bottom boundary layer, so that it is through a new bottom boundary condition that the topography affects the large-scale flow. For both homogeneous and stratified fluids, a single scalar function entirely encapsulates the properties of the topography that are relevant to the large-scale flow: it is the correlation function of the topographic height in the homogeneous case, and a linear transform thereof in the continuously stratified case.Some properties of the averaged equations are discussed. Explicit nonlinear solutions in the form of one-dimensional travelling waves can be found. In the homogeneous case, previously studied by Volosov, they obey a second-order differential equation; in the stratified case on which we focus they obey a nonlinear pseudodifferential equation, which reduces to the Peierls–Nabarro equation for sinusoidal topography. The known solutions to this equation provide examples of nonlinear periodic and solitary waves in continuously stratified fluid over topography.The influence of bottom topography on large-scale baroclinic instability is also examined using the averaged equations: they allow a straightforward extension of Eady's model which demonstrates the stabilizing effect of topography on baroclinic instability.

scholarly journals Gyrotactic swimmers in turbulence: shape effects and role of the large-scale flow

2018 ◽  
Vol 856 ◽  
Author(s):  
M. Borgnino ◽  
G. Boffetta ◽  
F. De Lillo ◽  
M. Cencini
Keyword(s):  
Large Scale ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Small Scale ◽  
Navier Stokes Equations ◽  
Preferential Sampling ◽  
Wide Range ◽  
Shape Effects ◽  
Dilute Suspensions ◽  
Large Scale Flow

We study the dynamics and the statistics of dilute suspensions of gyrotactic swimmers, a model for many aquatic motile microorganisms. By means of extensive numerical simulations of the Navier–Stokes equations at different Reynolds numbers, we investigate preferential sampling and small-scale clustering as a function of the swimming (stability and speed) and shape parameters, considering in particular the limits of spherical and rod-like particles. While spherical swimmers preferentially sample local downwelling flow, for elongated swimmers we observe a transition from downwelling to upwelling regions at sufficiently high swimming speed. The spatial distribution of both spherical and elongated swimmers is found to be fractal at small scales in a wide range of swimming parameters. The direct comparison between the different shapes shows that spherical swimmers are more clusterized at small stability and speed numbers, while for large values of the parameters elongated cells concentrate more. The relevance of our results for phytoplankton swimming in the ocean is briefly discussed.

scholarly journals Combined measurement of velocity and temperature in liquid metal convection

2019 ◽  
Vol 876 ◽  
pp. 1108-1128 ◽  
Author(s):  
Till Zürner ◽  
Felix Schindler ◽  
Tobias Vogt ◽  
Sven Eckert ◽  
Jörg Schumacher
Keyword(s):  
Reynolds Number ◽  
Liquid Metal ◽  
Large Scale ◽  
Scale Up ◽  
Convection Cell ◽  
Small Scale ◽  
Convection Flow ◽  
Large Scale Circulation ◽  
Large Scale Flow ◽  
The Impact

Combined measurements of velocity components and temperature in a turbulent Rayleigh–Bénard convection flow at a low Prandtl number of $Pr=0.029$ and Rayleigh numbers of $10^{6}\leqslant Ra\leqslant 6\times 10^{7}$ are conducted in a series of experiments with durations of more than a thousand free-fall time units. Multiple crossing ultrasound beam lines and an array of thermocouples at mid-height allow for a detailed analysis and characterization of the complex three-dimensional dynamics of the single large-scale circulation roll in a cylindrical convection cell of unit aspect ratio which is filled with the liquid metal alloy GaInSn. We measure the internal temporal correlations of the complex large-scale flow and distinguish between short-term oscillations associated with a sloshing motion in the mid-plane as well as varying orientation angles of the velocity close to the top/bottom plates and the slow azimuthal drift of the mean orientation of the roll as a whole that proceeds on a time scale up to a hundred times slower. The coherent large-scale circulation drives a vigorous turbulence in the whole cell that is quantified by direct Reynolds number measurements at different locations in the cell. The velocity increment statistics in the bulk of the cell displays characteristic properties of intermittent small-scale fluid turbulence. We also show that the impact of the symmetry-breaking large-scale flow persists to small-scale velocity fluctuations thus preventing the establishment of fully isotropic turbulence in the cell centre. Reynolds number amplitudes depend sensitively on beam-line position in the cell such that different definitions have to be compared. The global momentum and heat transfer scalings with Rayleigh number are found to agree with those of direct numerical simulations and other laboratory experiments.

Turbulent spots in a channel: large-scale flow and self-sustainability

2013 ◽  
Vol 731 ◽  
Author(s):  
Grégoire Lemoult ◽  
Jean-Luc Aider ◽  
José Eduardo Wesfreid
Keyword(s):  
Large Scale ◽  
Large Time ◽  
Rectangular Channel ◽  
Small Scale ◽  
Turbulent Spot ◽  
Time Resolved ◽  
Image Velocimetry ◽  
Streamwise Streaks ◽  
Large Scale Flow ◽  
Scale Motion

AbstractUsing a large-time-resolved particle image velocimetry field of view, a developing turbulent spot is followed in space and time in a rectangular channel flow for more than 100 advective time units. We show that the flow can be decomposed into a large-scale motion consisting of an asymmetric quadrupole centred on the spot and a small-scale part consisting of streamwise streaks. From the temporal evolution of the energy of the streamwise and spanwise velocity perturbations, it is suggested that a self-sustaining process can occur in a turbulent spot above a given Reynolds number.

Enhanced dissipation for quasi-geostrophic motion over small-scale topography

2000 ◽  
Vol 407 ◽  
pp. 105-122 ◽  
Author(s):  
JACQUES VANNESTE
Keyword(s):  
Large Scale ◽  
Spatial Scales ◽  
Additional Term ◽  
Equation Of Motion ◽  
Small Scale ◽  
Two Dimensional ◽  
Turbulent Dissipation ◽  
Dissipative Term ◽  
History Of ◽  
Large Scale Flow

The effect of a small-scale topography on large-scale, small-amplitude oceanic motion is analysed using a two-dimensional quasi-geostrophic model that includes free-surface and β effects, Ekman friction and viscous (or turbulent) dissipation. The topography is two-dimensional and periodic; its slope is assumed to be much larger than the ratio of the ocean depth to the Earth's radius. An averaged equation of motion is derived for flows with spatial scales that are much larger than the scale of the topography and either (i) much larger than or (ii) comparable to the radius of deformation. Compared to the standard quasi-geostrophic equation, this averaged equation contains an additional dissipative term that results from the interaction between topography and dissipation. In case (i) this term simply represents an additional Ekman friction, whereas in case (ii) it is given by an integral over the history of the large-scale flow. The properties of the additional term are studied in detail. For case (i) in particular, numerical calculations are employed to analyse the dependence of the additional Ekman friction on the structure of the topography and on the strength of the original dissipation mechanisms.

Flow Instabilities in Gas Turbine Chute Seals

2020 ◽  
Vol 142 (2) ◽  
Author(s):  
Joshua T. M. Horwood ◽  
Fabian P. Hualca ◽  
Mike Wilson ◽  
James A. Scobie ◽  
Carl M. Sangan ◽  
...  
Keyword(s):  
Large Scale ◽  
Computational Study ◽  
Leading Edge ◽  
Large Scale Structures ◽  
Strong Shear ◽  
Time Marching ◽  
Flow Through ◽  
Scale Structures ◽  
Large Scale Flow ◽  
Secondary Flow Field

Abstract The ingress of hot annulus gas into stator–rotor cavities is an important topic to engine designers. Rim-seals reduce the pressurized purge required to protect highly stressed components. This paper describes an experimental and computational study of flow through a turbine chute seal. The computations—which include a 360 deg domain—were undertaken using dlrtrace's time-marching solver. The experiments used a low Reynolds number turbine rig operating with an engine-representative flow structure. The simulations provide an excellent prediction of cavity pressure and swirl, and good overall agreement of sealing effectiveness when compared to experiment. Computation of flow within the chute seal showed strong shear gradients which influence the pressure distribution and secondary-flow field near the blade leading edge. High levels of shear across the rim-seal promote the formation of large-scale structures at the wheel-space periphery; the number and speed of which were measured experimentally and captured, qualitatively and quantitatively, by computations. A comparison of computational domains ranging from 30 deg to 360 deg indicates that steady features of the flow are largely unaffected by sector size. However, differences in large-scale flow structures were pronounced with a 60 deg sector and suggest that modeling an even number of blades in small sector simulations should be avoided.

Sign in / Sign up

Export Citation Format

Share Document