scholarly journals Combined measurement of velocity and temperature in liquid metal convection

2019 ◽  
Vol 876 ◽  
pp. 1108-1128 ◽  
Author(s):  
Till Zürner ◽  
Felix Schindler ◽  
Tobias Vogt ◽  
Sven Eckert ◽  
Jörg Schumacher
Keyword(s):  
Reynolds Number ◽  
Liquid Metal ◽  
Large Scale ◽  
Scale Up ◽  
Convection Cell ◽  
Small Scale ◽  
Convection Flow ◽  
Large Scale Circulation ◽  
Large Scale Flow ◽  
The Impact

Combined measurements of velocity components and temperature in a turbulent Rayleigh–Bénard convection flow at a low Prandtl number of $Pr=0.029$ and Rayleigh numbers of $10^{6}\leqslant Ra\leqslant 6\times 10^{7}$ are conducted in a series of experiments with durations of more than a thousand free-fall time units. Multiple crossing ultrasound beam lines and an array of thermocouples at mid-height allow for a detailed analysis and characterization of the complex three-dimensional dynamics of the single large-scale circulation roll in a cylindrical convection cell of unit aspect ratio which is filled with the liquid metal alloy GaInSn. We measure the internal temporal correlations of the complex large-scale flow and distinguish between short-term oscillations associated with a sloshing motion in the mid-plane as well as varying orientation angles of the velocity close to the top/bottom plates and the slow azimuthal drift of the mean orientation of the roll as a whole that proceeds on a time scale up to a hundred times slower. The coherent large-scale circulation drives a vigorous turbulence in the whole cell that is quantified by direct Reynolds number measurements at different locations in the cell. The velocity increment statistics in the bulk of the cell displays characteristic properties of intermittent small-scale fluid turbulence. We also show that the impact of the symmetry-breaking large-scale flow persists to small-scale velocity fluctuations thus preventing the establishment of fully isotropic turbulence in the cell centre. Reynolds number amplitudes depend sensitively on beam-line position in the cell such that different definitions have to be compared. The global momentum and heat transfer scalings with Rayleigh number are found to agree with those of direct numerical simulations and other laboratory experiments.

scholarly journals Relation between Large-Scale Circulation and European Winter Temperature: Does It Hold under Warmer Climate?

2010 ◽  
Vol 23 (13) ◽  
pp. 3752-3760 ◽  
Author(s):  
K. Goubanova ◽  
L. Li ◽  
P. Yiou ◽  
F. Codron
Keyword(s):  
Large Scale ◽  
Winter Temperature ◽  
Small Scale ◽  
Large Scale Circulation ◽  
Local Climate ◽  
Temperature Changes ◽  
Weather Regimes ◽  
High Resolution Models ◽  
The Individual ◽  
The Impact

Abstract The idea of using large-scale information to predict local climate variability is widely exploited in climate change impact studies as an alternative to computationally expensive high-resolution models. This approach implies the hypothesis that the statistical relationship between large-scale climate states and local variables defined for the present-day climate remains valid in the altered climate. In this paper, the concept of weather regimes is used to deduce a relationship between large-scale circulation and European winter temperature. The change in temperature with increased greenhouse gases is, however, not homogeneous among the individual regimes. As a result, the impact of the weather regimes on local temperature changes varies in the future, limiting its usefulness for refining temperature changes to the small scale.

scholarly journals Characteristics of Large-Scale Circulation Affecting the Inter-Annual Precipitation Variability in Northern Sumatra Island during Boreal Summer

Atmosphere ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 136
Author(s):  
Yahya Darmawan ◽  
Huang-Hsiung Hsu ◽  
Jia-Yuh Yu
Keyword(s):  
Large Scale ◽  
Precipitation Variability ◽  
Specific Humidity ◽  
Boreal Summer ◽  
Moisture Budget ◽  
Large Scale Circulation ◽  
Budget Analysis ◽  
Sumatra Island ◽  
Precipitation Anomalies ◽  
The Impact

This study aims to explore the contrasting characteristics of large-scale circulation that led to the precipitation anomalies over the northern parts of Sumatra Island. Further, the impact of varying the Asian–Australian Monsoon (AAM) was investigated for triggering the precipitation variability over the study area. The moisture budget analysis was applied to quantify the most dominant component that induces precipitation variability during the JJA (June, July, and August) period. Then, the composite analysis and statistical approach were applied to confirm the result of the moisture budget. Using the European Centre for Medium-Range Weather Forecasts (ECMWF) Re-Anaysis Interim (ERA-Interim) from 1981 to 2016, we identified 9 (nine) dry and 6 (six) wet years based on precipitation anomalies, respectively. The dry years (wet years) anomalies over the study area were mostly supported by downward (upward) vertical velocity anomaly instead of other variables such as specific humidity, horizontal velocity, and evaporation. In the dry years (wet years), there is a strengthening (weakening) of the descent motion, which triggers a reduction (increase) of convection over the study area. The overall downward (upward) motion of westerly (easterly) winds appears to suppress (support) the convection and lead to negative (positive) precipitation anomaly in the whole region but with the largest anomaly over northern parts of Sumatra. The AAM variability proven has a significant role in the precipitation variability over the study area. A teleconnection between the AAM and other global circulations implies the precipitation variability over the northern part of Sumatra Island as a regional phenomenon. The large-scale tropical circulation is possibly related to the PWC modulation (Pacific Walker Circulation).

A numerical study of the transition of jet diffusion flames

1990 ◽  
Vol 431 (1882) ◽  
pp. 301-314 ◽  
Keyword(s):  
Reynolds Number ◽  
Diffusion Coefficient ◽  
Large Scale ◽  
Numerical Study ◽  
Small Scale ◽  
Surface Model ◽  
Flame Surface ◽  
Transition Mechanism ◽  
Air Stream ◽  
Scale Fluctuation

A numerical study on the transition from laminar to turbulent of two-dimensional fuel jet flames developed in a co-flowing air stream was made by adopting the flame surface model of infinite chemical reaction rate and unit Lewis number. The time dependent compressible Navier–Stokes equation was solved numerically with the equation for coupling function by using a finite difference method. The temperature-dependence of viscosity and diffusion coefficient were taken into account so as to study effects of increases of these coefficients on the transition. The numerical calculation was done for the case when methane is injected into a co-flowing air stream with variable injection Reynolds number up to 2500. When the Reynolds number was smaller than 1000 the flame, as well as the flow, remained laminar in the calculated domain. As the Reynolds number was increased above this value, a transition point appeared along the flame, downstream of which the flame and flow began to fluctuate. Two kinds of fluctuations were observed, a small scale fluctuation near the jet axis and a large scale fluctuation outside the flame surface, both of the same origin, due to the Kelvin–Helmholtz instability. The radial distributions of density and transport coefficients were found to play dominant roles in this instability, and hence in the transition mechanism. The decreased density in the flame accelerated the instability, while the increase in viscosity had a stabilizing effect. However, the most important effect was the increase in diffusion coefficient. The increase shifted the flame surface, where the large density decrease occurs, outside the shear layer of the jet and produced a thick viscous layer surrounding the jet which effectively suppressed the instability.

scholarly journals Energy Production from Biogas: Competitiveness and Support Instruments in Latvia

2016 ◽  
Vol 53 (5) ◽  
pp. 43-53
Author(s):  
G. Klāvs ◽  
A. Kundziņa ◽  
I. Kudrenickis
Keyword(s):  
New Technologies ◽  
Local Economic Development ◽  
Renewable Energy Sources ◽  
Distribution Network ◽  
Scale Up ◽  
Electricity Production ◽  
Small Scale ◽  
Gas Distribution ◽  
Ex Post ◽  
The Impact

Abstract Use of renewable energy sources (RES) might be one of the key factors for the triple win-win: improving energy supply security, promoting local economic development, and reducing greenhouse gas emissions. The authors ex-post evaluate the impact of two main support instruments applied in 2010-2014 – the investment support (IS) and the feed-in tariff (FIT) – on the economic viability of small scale (up to 2MWel) biogas unit. The results indicate that the electricity production cost in biogas utility roughly corresponds to the historical FIT regarding electricity production using RES. However, if in addition to the FIT the IS is provided, the analysis shows that the practice of combining both the above-mentioned instruments is not optimal because too high total support (overcompensation) is provided for a biogas utility developer. In a long-term perspective, the latter gives wrong signals for investments in new technologies and also creates unequal competition in the RES electricity market. To provide optimal biogas utilisation, it is necessary to consider several options. Both on-site production of electricity and upgrading to biomethane for use in a low pressure gas distribution network are simulated by the cost estimation model. The authors’ estimates show that upgrading for use in a gas distribution network should be particularly considered taking into account the already existing infrastructure and technologies. This option requires lower support compared to support for electricity production in small-scale biogas utilities.

scholarly journals Climate SPHINX: evaluating the impact of resolution and stochastic physics parameterisations in the EC-Earth global climate model

2017 ◽  
Vol 10 (3) ◽  
pp. 1383-1402 ◽  
Author(s):  
Paolo Davini ◽  
Jost von Hardenberg ◽  
Susanna Corti ◽  
Hannah M. Christensen ◽  
Stephan Juricke ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Climate Model ◽  
Global Climate ◽  
Rainfall Variability ◽  
Global Climate Model ◽  
Small Scale ◽  
Low Resolution ◽  
The Impact ◽  
Stochastic Physics

Abstract. The Climate SPHINX (Stochastic Physics HIgh resolutioN eXperiments) project is a comprehensive set of ensemble simulations aimed at evaluating the sensitivity of present and future climate to model resolution and stochastic parameterisation. The EC-Earth Earth system model is used to explore the impact of stochastic physics in a large ensemble of 30-year climate integrations at five different atmospheric horizontal resolutions (from 125 up to 16 km). The project includes more than 120 simulations in both a historical scenario (1979–2008) and a climate change projection (2039–2068), together with coupled transient runs (1850–2100). A total of 20.4 million core hours have been used, made available from a single year grant from PRACE (the Partnership for Advanced Computing in Europe), and close to 1.5 PB of output data have been produced on SuperMUC IBM Petascale System at the Leibniz Supercomputing Centre (LRZ) in Garching, Germany. About 140 TB of post-processed data are stored on the CINECA supercomputing centre archives and are freely accessible to the community thanks to an EUDAT data pilot project. This paper presents the technical and scientific set-up of the experiments, including the details on the forcing used for the simulations performed, defining the SPHINX v1.0 protocol. In addition, an overview of preliminary results is given. An improvement in the simulation of Euro-Atlantic atmospheric blocking following resolution increase is observed. It is also shown that including stochastic parameterisation in the low-resolution runs helps to improve some aspects of the tropical climate – specifically the Madden–Julian Oscillation and the tropical rainfall variability. These findings show the importance of representing the impact of small-scale processes on the large-scale climate variability either explicitly (with high-resolution simulations) or stochastically (in low-resolution simulations).

scholarly journals Impacts of Large-Scale Circulation on Urban Ambient Concentrations of Gaseous Elemental Mercury in New York, USA

2017 ◽  
Author(s):  
Huiting Mao ◽  
Dolly Hall ◽  
Zhuyun Ye ◽  
Ying Zhou ◽  
Dirk Felton ◽  
...  
Keyword(s):  
New York ◽  
North American ◽  
Large Scale ◽  
Measurement Data ◽  
Elemental Mercury ◽  
Urban Site ◽  
Large Scale Circulation ◽  
Gaseous Elemental Mercury ◽  
The North ◽  
The Impact

Abstract. The impact of large-scale circulation on urban gaseous elemental mercury (GEM) was investigated through analysis of 2008–2015 measurement data from an urban site in New York City (NYC), New York, USA. Distinct annual cycles were observed in 2009–2010 with mixing ratios in warm seasons (i.e. spring–summer) 10–20 ppqv (~ 10 %–25 %) higher than in cool seasons (i.e. fall–winter). This annual cycle was disrupted in 2011 by an anomalously strong influence of the North American trough in that warm season and was reproduced in 2014 with annual amplitude enhanced up to ~ 70 ppqv associated with a particularly strong Bermuda High. North American trough axis index (TAI) and intensity index (TII) were used to characterize the effect of the North American trough on NYC GEM especially in winter and summer. The intensity and position of the Bermuda High had a significant impact on GEM in warm seasons supported by a strong correlation (r reaching 0.96, p 

Pressure gradient effects on the large-scale structure of turbulent boundary layers

2013 ◽  
Vol 715 ◽  
pp. 477-498 ◽  
Author(s):  
Zambri Harun ◽  
Jason P. Monty ◽  
Romain Mathis ◽  
Ivan Marusic
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Small Scale

AbstractResearch into high-Reynolds-number turbulent boundary layers in recent years has brought about a renewed interest in the larger-scale structures. It is now known that these structures emerge more prominently in the outer region not only due to increased Reynolds number (Metzger & Klewicki, Phys. Fluids, vol. 13(3), 2001, pp. 692–701; Hutchins & Marusic, J. Fluid Mech., vol. 579, 2007, pp. 1–28), but also when a boundary layer is exposed to an adverse pressure gradient (Bradshaw, J. Fluid Mech., vol. 29, 1967, pp. 625–645; Lee & Sung, J. Fluid Mech., vol. 639, 2009, pp. 101–131). The latter case has not received as much attention in the literature. As such, this work investigates the modification of the large-scale features of boundary layers subjected to zero, adverse and favourable pressure gradients. It is first shown that the mean velocities, turbulence intensities and turbulence production are significantly different in the outer region across the three cases. Spectral and scale decomposition analyses confirm that the large scales are more energized throughout the entire adverse pressure gradient boundary layer, especially in the outer region. Although more energetic, there is a similar spectral distribution of energy in the wake region, implying the geometrical structure of the outer layer remains universal in all cases. Comparisons are also made of the amplitude modulation of small scales by the large-scale motions for the three pressure gradient cases. The wall-normal location of the zero-crossing of small-scale amplitude modulation is found to increase with increasing pressure gradient, yet this location continues to coincide with the large-scale energetic peak wall-normal location (as has been observed in zero pressure gradient boundary layers). The amplitude modulation effect is found to increase as pressure gradient is increased from favourable to adverse.

scholarly journals Mechanism of large-scale flow reversals in turbulent thermal convection

2018 ◽  
Vol 4 (11) ◽  
pp. eaat7480 ◽  
Author(s):  
Yin Wang ◽  
Pik-Yin Lai ◽  
Hao Song ◽  
Penger Tong
Keyword(s):  
Thermal Convection ◽  
Large Scale ◽  
Careful Analysis ◽  
Extreme Value Statistics ◽  
Convection Cell ◽  
Heat Accumulation ◽  
Thermal Plumes ◽  
Minute Amount ◽  
Large Scale Flow ◽  
Experimental Findings

It is commonly believed that heat flux passing through a closed thermal convection system is balanced so that the convection system can remain at a steady state. Here, we report a new kind of convective instability for turbulent thermal convection, in which the convective flow stays over a long steady “quiet period” having a minute amount of heat accumulation in the convection cell, followed by a short and intermittent “active period” with a massive eruption of thermal plumes to release the accumulated heat. The rare massive eruption of thermal plumes disrupts the existing large-scale circulation across the cell and resets its rotational direction. A careful analysis reveals that the distribution of the plume eruption amplitude follows the generalized extreme value statistics with an upper bound, which changes with the fluid properties of the convecting medium. The experimental findings have important implications to many closed convection systems of geophysical scale, in which massive eruptions and sudden changes in large-scale flow pattern are often observed.

Experimental Study of Large-Scale Flow Structures in an Aneurysm

2018 ◽  
Author(s):  
Paulo Yu ◽  
Vibhav Durgesh
Keyword(s):  
Large Scale ◽  
Flow Structures ◽  
Pump System ◽  
Vortical Structures ◽  
Abnormal Growth ◽  
Image Velocimetry ◽  
Large Scale Flow ◽  
The Impact ◽  
Inflow Conditions ◽  
Aneurysm Model

An aneurysm is an abnormal growth in the wall of a weakened blood vessel, and can often be fatal upon rupture. Studies have shown that aneurysm shape and hemodynamics, in conjunction with other parameters, play an important role in growth and rupture. The objective of this study was to investigate the impact of varying inflow conditions on flow structures in an aneurysm. An idealized rigid sidewall aneurysm model was prepared and the Womersley number (α) and Reynolds number (Re) values were varied from 2 to 5 and 50 to 250, respectively. A ViVitro Labs pump system was used for inflow control and Particle Image Velocimetry was used for conducting velocity measurements. The results showed that the primary vortex path varied with an increase in α, while an increase in Re was correlated to the vortex strength and formation of secondary vortical structures. The evolution and decay of vortical structures were also observed to be dependent on α and Re.

scholarly journals Marine Rapid Environmental Assessment in the Gulf of Taranto: a multiscale approach

2016 ◽  
Vol 16 (12) ◽  
pp. 2623-2639 ◽  
Author(s):  
Nadia Pinardi ◽  
Vladyslav Lyubartsev ◽  
Nicola Cardellicchio ◽  
Claudio Caporale ◽  
Stefania Ciliberti ◽  
...  
Keyword(s):  
Surface Waters ◽  
Large Scale ◽  
Eastern Mediterranean ◽  
Small Scale ◽  
Multiscale Approach ◽  
Mesoscale Variability ◽  
Large Scale Circulation ◽  
Eddy Field ◽  
Multiscale Sampling ◽  
Circulation Structure

Abstract. A multiscale sampling experiment was carried out in the Gulf of Taranto (eastern Mediterranean) providing the first synoptic evidence of the large-scale circulation structure and associated mesoscale variability. The mapping of the mesoscale and large-scale geostrophic circulation showed the presence of an anticyclonic large-scale gyre occupying the central open ocean area of the Gulf of Taranto. On the periphery of the gyre upwelling is evident where surface waters are colder and saltier than at the center of the gyre. Over a 1-week period, the rim current of the gyre undergoes large changes which are interpreted as baroclinic–barotropic instabilities, generating small-scale cyclonic eddies in the periphery of the anticyclone. The eddies are generally small, one of which can be classified as a submesoscale eddy due to its size. This eddy field modulates the upwelling regime in the gyre periphery.

Sign in / Sign up

Export Citation Format

Share Document