scholarly journals Timing and magnitude of vertical-axis rotations in the eastwards-flanking synorogenic sediments of the South-Pyrenean fold-and-thrust belt. Kinematics and origin of the salient curvature.

2020 ◽  
Author(s):  
Charlotte Peigney ◽  
Elisabet Beamud ◽  
Óscar Gratacós ◽  
Luis Valero ◽  
Ruth Soto ◽  
...  
Keyword(s):  
Foreland Basin ◽  
Structural Data ◽  
Vertical Axis ◽  
Central Unit ◽  
Thrust Belt ◽  
The South ◽  
The North ◽  
South Central ◽  
Fold And Thrust Belt ◽  
Thrust Sheets

<p>The South-Pyrenean fold-and-thrust belt consists of three major thin-skinned thrust sheets (Bóixols, Montsec and Serres Marginals) made up of uppermost Triassic to Oligocene cover rocks emplaced during Late Cretaceous-Oligocene times. In its central part, it forms a major salient (the Pyrenean South-Central Unit) whose geometry is controlled by the areal distribution of the pre-orogenic Upper Triassic and synorogenic Eocene salt décollement layers. Both westwards and eastwards, the salient is fringed by Paleogene synorogenic deposits that are deformed by detachment folds with orientations ranging from N-S to E-W. In the western edge of the salient, the varying trend of the folds is a result of synorogenic vertical axis rotations (VAR) which caused the clockwise rotation of the folds from an initial predominant E-W trend to the current NW-SE to NNW-SSE trend. The salient, at least on its western part, developed from a progressive curve originated from divergent thrust transport directions and distributed shortening.</p><p>The aim of our study is to get a better understanding of the whole salient, by studying the kinematics of the deformation on the most frontal part of its eastern edge. Here, some sparse anticlockwise rotations have been reported but their origin and their possible relationship with the distribution of the salt décollements has not yet been addressed. For this purpose, 78 paleomagnetic sites have been sampled on the synorogenic upper Eocene-Oligocene materials of the NE Ebro foreland Basin, in the Artesa de Segre area, focusing on the limbs of oblique salt-cored anticlines (Ponts, Vilanova de l’Aguda, Cardona) which are detached above the synorogenic Eocene-Oligocene evaporites of the Cardona and the Barbastro formations. VAR analyses principally show anticlockwise rotations similar to those previously identified to the North in the Oliana Anticline, although a small number of clockwise rotations were also detected.</p><p>In addition to the VAR analysis, a magnetostratigraphic study of the Eocene-Oligocene continental materials of the northern limb of the Sanaüja Anticline has been conducted in order to constrain the age of these rotations from stratigraphic correlations. The demagnetization of 104 samples from a ca. 1100 m thick magnetostratigraphic section shows Priabonian to Rupelian ages for this succession. The integration of our results on timing, direction and magnitude of foreland VAR with previous paleomagnetic and structural data from both the western and eastern boundaries of the frontal thrust of the Pyrenean South-Central Unit will allow the understanding of the kinematics of the thrust salient as a whole.</p>

Post-depositional history of the Miocene Gorgoglione Formation (southern Apennines, Italy): inferences from mineralogical and structural analyses

2015 ◽  
Vol 186 (4-5) ◽  
pp. 243-256 ◽  
Author(s):  
Francesco Cavalcante ◽  
Giacomo Prosser ◽  
Fabrizio Agosta ◽  
Claudia Belviso ◽  
Giuseppe Corrado
Keyword(s):  
Structural Data ◽  
Axial Plane ◽  
Thrust Belt ◽  
Southern Apennines ◽  
High Potassium ◽  
Upper Miocene ◽  
Fold And Thrust Belt ◽  
Thrust Sheets ◽  
Layer Increase ◽  
Illitization Process

Abstract The Gorgoglione Formation represents the infill of a thrust-top basin, which records the tectonic evolution of the southern Apennines (Italy) since Upper Miocene times. The Upper Miocene basin was divided into two main sub-basins, showing both about NNW-SSW elongation. During ongoing contractional deformation, the Gorgoglione basin was incorporated into the allochthonous units of the Apennine fold-and-thrust belt, as outlined by the emplacement of thrust sheets of internal provenance (Sicilide Unit) and by the development of two main generations of tight to open folds. In this work, the modalities of deformation associated to the incorporation of the Gorgoglione Formation into the fold-and-thrust belt has been documented by means of mineralogical and structural analyses. Mineralogical data show that, in the northeastern sub-basin of the Gorgoglione Formation, the illite content and the order of illite/smectite mixed layer increase near the contact with the overlaying Sicilide Unit. These data are hence used to estimate the relative tectonic load produced by thrusting of the aforementioned tectonic unit. Structural data are consistent with tight, NNW-trending, meso-scale folds particularly frequent in the upper pelitic/arenaceous portion of the Gorgoglione Formation. Within these folded pelitic levels, a well-developed axial-plane foliation, and an ordered I/S (R1 and R3) with higher illite content, is documented. Instead, other folds developed far away from the Sicilide klippen show an incipient axial-plane foliation and a random I/S (R0) with lower illite amount is found in pelites. The data suggest that the eastern sub-basin of the Gorgoglione Formation underwent variable tectonic load, increasing from E to W, as well as deformation produced by thrusting of Sicilide sheet. The mineralogical data also indicate that illitization process is favoured for the high availability of potassium due to the dissolution of k-feldspar. High potassium availability affects the samples subjected to the highest diagenetic degree, characterized by kaolinite illitization process.

Syn-folding remagnetization events in the French-Belgium Variscan thrust front as markers of the fold-and-thrust belt kinematics

2003 ◽  
Vol 174 (5) ◽  
pp. 511-523 ◽  
Author(s):  
Rafal Szaniawski ◽  
Marek Lewandowski ◽  
Jean-Louis Mansy ◽  
Olivier Averbuch ◽  
Frederic Lacquement
Keyword(s):  
Foreland Basin ◽  
Vertical Axis ◽  
Natural Remanent Magnetization ◽  
Thrust Belt ◽  
High Temperature Component ◽  
Set Constraints ◽  
Thrust Front ◽  
Fold And Thrust Belt ◽  
Temperature Component ◽  
Major Strike

Abstract New paleomagnetic studies have been carried out within the Ardennes segment of the N France - S Belgium Variscan fold-and-thrust belt to set constraints on the fold-thrust belt kinematics and reveal the casual relationships between vertical-axis rotations and major strike deviated zones localised along the general trend of the belt. Magnetite-bearing Devonian and Carboniferous limestones yielded two characteristic, secondary components of the natural remanent magnetization : a low temperature component recorded most probably during the late stages of folding and a high temperature component, acquired during incipient stages of deformation. Both post- and synfolding magnetizations were identified in the Lower Devonian hematite bearing sandstones. Ages of magnetization, inferred from the analysis of characteristic remanence inclinations compared to the reference curves for the stable parts of the Old Red Sandstones Continent (ORC), suggest the previous remagnetization event to be due to the burial of sedimentary rocks under the thick molassic foreland basin of Namurian-Westphalian age and the second to the final out-of-sequence activation of the thrust front in Stephanian times. Irrespective of the age of the magnetizations, orientations of paleomagnetic directions are dominantly governed by second-order structural trends. Clockwise rotations are observed in relatively narrow zones featuring deviated orientations of fold axes, other sites show paleomagnetic directions akin to those known from the ORC. We interpret this feature as a result of local transpressive deformations and related rotations, which occurred at lateral borders of propagating thrust-sheets. The latter deformation zones are suggested to be controlled by deep-seated discontinuities inherited from the Devonian Rheno-hercynian basin development. The Ardennes thrust belt was thus not rotated as a whole unit with respect to the ORC after the Namurian, preserving the initial orientation of the continental margin.

scholarly journals Structure of the south-central Taiwan fold-and-thrust belt

2020 ◽  
Author(s):  
Dennis Brown ◽  
Joaquina Alvarez-Marron ◽  
Hao Kuo-Chen ◽  
Yih-Min Wu ◽  
Giovanni Camanni ◽  
...  
Keyword(s):  
Strain Rate ◽  
Stress And Strain ◽  
Shear Strain Rate ◽  
Thrust Belt ◽  
The South ◽  
Kinematic Evolution ◽  
South Central ◽  
Shelf Slope ◽  
Fold And Thrust Belt ◽  
High Topography

<p>Studies of mountain belts worldwide have shown that the structural, mechanical, and kinematic evolution of their foreland fold-and-thrust belts are strongly influenced by the structure of the continental margins that are involved in the deformation. The area on and around the island of Taiwan provides an unparalleled opportunity to investigate this because the entire profile of the SE margin of the Eurasian plate, from the shelf in the north to the slope and continent-ocean transition in the south and the offshore, is currently involved in a collision with the Luzon arc on the Philippine Sea plate. Taiwan can, then, provide key insights into how such features as rift basins on the shelf, the extensional faults that form the shelf-slope break in the basement, or the structure of the extended crust and morphology of the sedimentary carapace of the slope can be directly reflected in the structural architecture, the location and pattern of seismicity, topography, and the contemporaneous stress and strain fields of a fold-and-thrust belt. For example, east-northeast striking faults that have been mapped on the necking zone of the Eurasian margin can be traced into the island of Taiwan where they are causing important along-strike changes in various aspects of the structural, mechanical, kinematic, and morphological behavior of the fold-and-thrust belt. In particular, across the upper part of the necking zone there is an abrupt north-south change in structure, an increase in the amount of seismicity, an increase in topography, a rotation of the direction of maximum compressive horizontal stress, of the GPS displacement vectors, the compressional strain rate, and the maximum shear strain rate. These changes are interpreted to be caused by east-northeast striking, dextral strike-slip faulting in the basement that is taking place as a result of the reactivation of pre-existing faults along the upper part of the necking zone. The abrupt southeastward increase in topography across the upper part of the necking zone is the surface expression of the basal thrust of the fold-and-thrust belt ramping down into the basement, with maximum elevations reached in the basement-involved thrust sheets, suggesting a causal link between basement involvement in the thrusting and high topography. On the shelf, the roughly northeast-oriented Hsuehshan Trough is inverting along almost north-south striking basin bounding faults that penetrate into the middle crust and have well-clustered, deep seismicity. There are no substantial differences in the contemporaneous stress and strain field. There is, however, a clear relationship between basement involvement in the thrusting and the development of high topography in the Hsuehshan Range. Only the upper part of the slope is involved in the fold-and-thrust belt in southernmost Taiwan. In this area, there is a reduction of the amount of seismicity and lower topography. The largest part of the corresponding thrust wedge developed in the lower slope is offshore. This work is funded by the Spanish Ministerio de Ciencia, Innovación y Universidades grant PGC2018-094227-B-I00.</p>

scholarly journals How the structural architecture of the Eurasian continental margin affects the structure, seismicity, and topography of the south central Taiwan fold-and-thrust belt

Tectonics ◽  
2017 ◽  
Vol 36 (7) ◽  
pp. 1275-1294 ◽  
Author(s):  
Dennis Brown ◽  
Joaquina Alvarez-Marron ◽  
Cristina Biete ◽  
Hao Kuo-Chen ◽  
Giovanni Camanni ◽  
...  
Keyword(s):  
Continental Margin ◽  
Thrust Belt ◽  
The South ◽  
South Central ◽  
Fold And Thrust Belt ◽  
Central Taiwan ◽  
Structural Architecture

scholarly journals The influence of inherited continental margin structures on the stress and strain fields of the south-central Taiwan fold-and-thrust belt

2019 ◽  
Vol 219 (1) ◽  
pp. 430-448
Author(s):  
Cristina Biete ◽  
Dennis Brown ◽  
Björn Lund ◽  
Joaquina Alvarez-Marron ◽  
Yih-Min Wu ◽  
...  
Keyword(s):  
Strain Rate ◽  
Continental Margin ◽  
Displacement Field ◽  
Stress And Strain ◽  
Thrust Belt ◽  
The South ◽  
Strain Fields ◽  
South Central ◽  
Fold And Thrust Belt ◽  
Central Taiwan

SUMMARY In this paper we test whether or not structural and morphological features inherited from the Eurasian continental margin are affecting the contemporary stress and strain fields in south-central Taiwan. Principal stress directions (σ1, σ2 and σ3) are estimated from the inversion of clustered earthquake focal mechanisms and the direction of the maximum compressive horizontal stress (SH) is calculated throughout the study area. From these data the most likely fault plane orientations and their kinematics are inferred. The results of the stress inversion are then discussed together with the directions of displacement, compressional strain rate and maximum shear strain rate derived from GPS data. These data show that there is a marked contrast in the direction of SH from north to south across the study area, with the direction of SH remaining roughly subparallel to the relative plate motion vector in the north, whereas in the south it rotates nearly 45° counter-clockwise. The direction of the horizontal maximum compression strain rate (εH) and associated maximum shear planes, together with the displacement field display an overall similar pattern between them, although undergoing a less marked rotation. We interpret the southward change in the SH, εH and the dextral maximum shear plane directions, together with that of the horizontal displacement field to be related to the reactivation of east–northeast striking faults inherited from the rifted Eurasian margin and to the shelf/slope break. Inherited faults in the basement are typically reactivated as strike-slip faults, whereas newly formed faults in the fold-and-thrust belt are commonly thrusts or oblique thrusts. Eastwards, the stress inversions and strain data show that the western flank of the Central Range is undergoing extension in the upper crust. SH in the Central Range is roughly parallel to the relative plate convergence vector, but in southwestern Taiwan it undergoes a marked counter-clockwise rotation westwards across the Chaochou fault. Farther north, however, there is no significant change across the Lishan fault. This north to south difference is likely due to different margin structures, although local topographic effects may also play a role.

Timing and origin of deformation along the Patagonian fold and thrust belt

2000 ◽  
Vol 137 (4) ◽  
pp. 345-353 ◽  
Author(s):  
M. SUÁREZ ◽  
R. DE LA CRUZ ◽  
C. M. BELL
Keyword(s):  
Continental Margin ◽  
Foreland Basin ◽  
South American ◽  
Thrust Belt ◽  
The South ◽  
Plate Convergence ◽  
Ridge Subduction ◽  
Fold And Thrust Belt ◽  
Chile Ridge ◽  
Oceanic Plates

The Andean orogeny in the Patagonian Cordillera of southern South America reflects the consequences of the Mesozoic and Cenozoic subduction of an oceanic plate beneath the South American continental margin. The geological evolution of the region has been influenced by the Eocene collision and subduction of the Farallon–Aluk Ridge and the Miocene–Recent subduction of the Chile Ridge. Another aspect of plate interaction during this period was two intervals of rapid plate convergence, one at 50–42 Ma, and the other at 25–10 Ma, between the South American and the oceanic plates. It has been proposed that the collision of the Chile Ridge with the trench was responsible for the development, at least in part, of the Patagonian fold and thrust belt. This belt extends for more than 1000 km along the eastern foothills of the southern Andes between 46° and 54° S along the southwestern rim of the Austral Basin. The interpretation of a link between subduction of the ridge and formation of the fold and thrust belt is based on assumed time coincidences between contractional tectonism and the collision of ridge segments during Middle and Late Miocene times. The main Tertiary contractional events in the Patagonian fold and thrust belt took place during latest Cretaceous–Palaeocene–Eocene and during Miocene times. Although the timing of deformation is still poorly constrained, the evidence currently available suggests that there is little or no relationship between the timing of the fold and thrust belt and the collision of ridge segments. Most if not all of the contractional tectonism pre-dated the latest episodes of ridge collision. Collision of a ridge crest with the continental margin has been active for the past 14 to 15 million years. Contrary to the suggestion of a relationship between ridge subduction and compression, the main result of this collision has been fast uplift and extensional tectonism. The initiation of the Patagonian fold and thrust belt in latest Cretaceous or early Tertiary times coincided with a fundamental change in the tectonic evolution of the Austral Basin. Throughout the Cretaceous most of this basin subsided as a broad backarc continental shelf. Only in latest Cretaceous times, and coinciding with the initiation of the fold and thrust belt, the basin underwent a transition to a retro-arc foreland basin. This change to an asymmetrically subsiding foreland basin, with an associated foreland fold and thrust belt, was related to uplift of the Andean orogenic belt in the west.

Structure and tectonic evolution of the South Patagonian fold and thrust belt: Coupling between subduction dynamics, climate and tectonic deformation

2019 ◽  
pp. 675-697
Author(s):  
Matías C. Ghiglione ◽  
Gonzalo Ronda ◽  
Rodrigo J. Suárez ◽  
Inés Aramendía ◽  
Vanesa Barberón ◽  
...  
Keyword(s):  
Tectonic Evolution ◽  
Tectonic Deformation ◽  
Thrust Belt ◽  
The South ◽  
Fold And Thrust Belt

Climatology and Trends of Climate Extremes of Temperature and Precipitation in Belo Monte Hydropower Plant – Eastern Amazon, Brazil

2021 ◽  
Author(s):  
Wanderson Luiz-Silva ◽  
Pedro Regoto ◽  
Camila Ferreira de Vasconcellos ◽  
Felipe Bevilaqua Foldes Guimarães ◽  
Katia Cristina Garcia
Keyword(s):  
Climate Change ◽  
Climate Extremes ◽  
Annual Rainfall ◽  
The South ◽  
North Central ◽  
Adaptation Capacity ◽  
The North ◽  
South Central ◽  
Daily Data ◽  
Belo Monte

<p>This research aims to support studies related to the adaptation capacity of the Amazon region to climate change. The Belo Monte Hydroelectric Power Plant (HPP) is in the Xingu River basin, in eastern Amazonia. Deforestation coupled with changes in water bodies that occurred in the drainage area of Belo Monte HPP over the past few decades can significantly influence the hydroclimatic features and, consequently, ecosystems and energy generation in the region. In this context, we analyze the climatology and trends of climate extremes in this area. The climate information comes from daily data in grid points of 0.25° x 0.25° for the period 1980-2013, available in http://careyking.com/data-downloads/. A set of 17 climate extremes indices based on daily data of maximum temperature (TX), minimum temperature (TN), and precipitation (PRCP) was calculated through the RClimDex software, recommended by the Expert Team on Climate Change Detection and Indices (ETCCDI). The Mann-Kendall and the Sen’s Curvature tests are used to assess the statistical significance and the magnitude of the trends, respectively. The drainage area of the Belo Monte HPP is dominated by two climatic types: an equatorial climate in the north-central portion of the basin, with high temperatures and little variation throughout the year (22°C to 32°C), in addition to more frequent precipitation; and a tropical climate in the south-central sector, which experiences slightly more pronounced temperature variations throughout the year (20°C to 33°C) and presents a more defined wet and dry periods. The south-central portion of the basin exhibits the highest temperature extremes, with the highest TX and the lowest TN of the year occurring in this area, both due to the predominant days of clear skies in the austral winter, as to the advance of intense masses of polar air at this period. The diurnal temperature range is lower in the north-central sector when compared to that in the south-central region since the first has greater cloud cover and a higher frequency of precipitation. The largest annual rainfall volumes are concentrated at the north and west sides (more than 1,800 mm) and the precipitation extremes are heterogeneous across the basin. The maximum number of consecutive dry days increases from the north (10 to 20 days) to the south (90 to 100 days). The annual frequency of warm days and nights is increasing significantly in a large part of the basin with a magnitude ranging predominantly from +7 to +19 days/decade. The annual rainfall shows a predominant elevation sign of up to +200 mm/decade only in the northern part of the basin, while the remainder shows a reduction of up to -100 mm/decade. The duration of drought periods increases in the south-central sector of the basin, reaching up to +13 days/decade in some areas. The results of this study will be used in the future as an important input, together with exposure, sensibility, and local adaptation capacity, to design adaptation strategies that are more consistent with local reality and to the needs of local communities.</p>

Sign in / Sign up

Export Citation Format

Share Document