Maritime built heritage and marine wildlife: Remote sensing as a tool to identify and prioritise integrated conservation in coastal environments

Author(s):  
Tim Baxter ◽  
Martin Coombes ◽  
Heather Viles

<p>Maritime built heritage is threatened by natural hazards and human activities around the world. Likewise, marine wildlife is increasingly threatened by the effects of climate change and human development. Due to their age and traditional construction, maritime built heritage (e.g. historic harbours) may provide unique habitats for diverse assemblages of marine wildlife. Yet, as aspects of built heritage are often missing in assessments of marine infrastructure, identifying which heritage assets have the potential to provide the greatest ecological benefits remains a challenge. An improved understanding of the ecological importance of maritime built heritage can enhance arguments for its continued protection, maintenance and repair. At the same time, this may present new opportunities to conserve important and largely unidentified hotspots of marine biodiversity.</p><p>Using preliminary results from the Isles of Scilly, UK, this study presents a novel method for quantifying the full extent of marine engineering structures (including heritage assets) at a regional scale, and for identifying priority structures for joint biodiversity and heritage conservation.</p><p>Remote sensing data were considered alongside historic environment data and records of modern coastal defences in a rapid desk-based assessment to create a complete inventory of marine structures along the entire coastline of the Isles of Scilly. In total, 68 structures were recorded (6,180 m in length), with over half registered as heritage assets. LiDAR and aerial photography were used to determine the site characteristics of each structure (e.g. shore position). This allowed for an initial assessment of the potential ecological importance of these structures when considered alongside structural information, including building age and material. By evaluating the ecological potential and heritage value of each structure using a novel scoring system, priorities for conservation and other managed interventions are identified. This includes listed buildings and scheduled monuments that due to their construction features and shore position are most likely to support diverse marine assemblages.</p><p>Combined ecological-heritage evaluations incorporating remote sensing datasets allow for the identification of those structures with the greatest potential for the integrated conservation of built heritage and marine wildlife. Research is now needed to develop this method further, ground-truth its outputs, and test its application in other geographical locations and at varying scales.</p>

2021 ◽  
Vol 13 (8) ◽  
pp. 1516
Author(s):  
Boyang Li ◽  
Yaokui Cui ◽  
Xiaozhuang Geng ◽  
Huan Li

Evapotranspiration (ET) of soil-vegetation system is the main process of the water and energy exchange between the atmosphere and the land surface. Spatio-temporal continuous ET is vitally important to agriculture and ecological applications. Surface temperature and vegetation index (Ts-VI) triangle ET model based on remote sensing land surface temperature (LST) is widely used to monitor the land surface ET. However, a large number of missing data caused by the presence of clouds always reduces the availability of the main parameter LST, thus making the remote sensing-based ET estimation unavailable. In this paper, a method to improve the availability of ET estimates from Ts-VI model is proposed. Firstly, continuous LST product of the time series is obtained using a reconstruction algorithm, and then, the reconstructed LST is applied to the estimate ET using the Ts-VI model. The validation in the Heihe River Basin from 2009 to 2011 showed that the availability of ET estimates is improved from 25 days per year (d/yr) to 141 d/yr. Compared with the in situ data, a very good performance of the estimated ET is found with RMSE 1.23 mm/day and R2 0.6257 at point scale and RMSE 0.32 mm/day and R2 0.8556 at regional scale. This will improve the understanding of the water and energy exchange between the atmosphere and the land surface, especially under cloudy conditions.


2012 ◽  
Vol 117 (G3) ◽  
pp. n/a-n/a ◽  
Author(s):  
Xi Yang ◽  
John F. Mustard ◽  
Jianwu Tang ◽  
Hong Xu

2021 ◽  
Author(s):  
Richard Mommertz ◽  
Lars Konen ◽  
Martin Schodlok

<p>Soil is one of the world’s most important natural resources for human livelihood as it provides food and clean water. Therefore, its preservation is of huge importance. For this purpose, a proficient regional database on soil properties is needed. The project “ReCharBo” (Regional Characterisation of Soil Properties) has the objective to combine remote sensing, geophysical and pedological methods to determine soil characteristics on a regional scale. Its aim is to characterise soils non-invasive, time and cost efficient and with a minimal number of soil samples to calibrate the measurements. Konen et al. (2021) give detailed information on the research concept and first field results in a presentation in the session “SSS10.3 Digital Soil Mapping and Assessment”. Hyperspectral remote sensing is a powerful and well known technique to characterise near surface soil properties. Depending on the sensor technology and the data quality, a wide variety of soil properties can be derived with remotely sensed data (Chabrillat et al. 2019, Stenberg et al. 2010). The project aims to investigate the effects of up and downscaling, namely which detail of information is preserved on a regional scale and how a change in scales affects the analysis algorithms and the possibility to retrieve valid soil parameter information. Thus, e.g. laboratory and field spectroscopy are applied to gain information of samples and fieldspots, respectively. Various UAV-based sensors, e.g. thermal & hyperspectral sensors, are applied to study soil properties of arable land in different study areas at field scale. Finally, airborne (helicopter) hyperspectral data will cover the regional scale. Additionally forthcoming spaceborne hyperspectral satellite data (e.g. Prisma, EnMAP, Sentinel-CHIME) are a promising outlook to gain detailed regional soil information. In this context it will be discussed how the multisensor data acquisition is best managed to optimise soil parameter retrieval. Sensor specific properties regarding time and date of acquisition as well as weather/atmospheric conditions are outlined. The presentation addresses and discusses the impact of a multisensor and multiscale remote sensing data collection regarding the results on soil parameter retrieval.</p><p> </p><p>References</p><p>Chabrillat, S., Ben-Dor, E. Cierniewski, J., Gomez, C., Schmid, T. & van Wesemael, B. (2019): Imaging Spectroscopy for Soil Mapping and Monitoring. Surveys in Geophysics 40:361–399. https://doi.org/10.1007/s10712-019-09524-0</p><p>Stenberg, B., Viscarra Rossel, R. A., Mounem Mouazen, A. & Wetterlind, J. (2010): Visible and Near Infrared Spectroscopy in Soil Science. In: Donald L. Sparks (editor): Advances in Agronomy. Vol. 107. Academic Press:163-215. http://dx.doi.org/10.1016/S0065-2113(10)07005-7</p>


2015 ◽  
Vol 12 (14) ◽  
pp. 4385-4405 ◽  
Author(s):  
M. A. Rawlins ◽  
A. D. McGuire ◽  
J. S. Kimball ◽  
P. Dass ◽  
D. Lawrence ◽  
...  

Abstract. A warming climate is altering land-atmosphere exchanges of carbon, with a potential for increased vegetation productivity as well as the mobilization of permafrost soil carbon stores. Here we investigate land-atmosphere carbon dioxide (CO2) cycling through analysis of net ecosystem productivity (NEP) and its component fluxes of gross primary productivity (GPP) and ecosystem respiration (ER) and soil carbon residence time, simulated by a set of land surface models (LSMs) over a region spanning the drainage basin of Northern Eurasia. The retrospective simulations cover the period 1960–2009 at 0.5° resolution, which is a scale common among many global carbon and climate model simulations. Model performance benchmarks were drawn from comparisons against both observed CO2 fluxes derived from site-based eddy covariance measurements as well as regional-scale GPP estimates based on satellite remote-sensing data. The site-based comparisons depict a tendency for overestimates in GPP and ER for several of the models, particularly at the two sites to the south. For several models the spatial pattern in GPP explains less than half the variance in the MODIS MOD17 GPP product. Across the models NEP increases by as little as 0.01 to as much as 0.79 g C m−2 yr−2, equivalent to 3 to 340 % of the respective model means, over the analysis period. For the multimodel average the increase is 135 % of the mean from the first to last 10 years of record (1960–1969 vs. 2000–2009), with a weakening CO2 sink over the latter decades. Vegetation net primary productivity increased by 8 to 30 % from the first to last 10 years, contributing to soil carbon storage gains. The range in regional mean NEP among the group is twice the multimodel mean, indicative of the uncertainty in CO2 sink strength. The models simulate that inputs to the soil carbon pool exceeded losses, resulting in a net soil carbon gain amid a decrease in residence time. Our analysis points to improvements in model elements controlling vegetation productivity and soil respiration as being needed for reducing uncertainty in land-atmosphere CO2 exchange. These advances will require collection of new field data on vegetation and soil dynamics, the development of benchmarking data sets from measurements and remote-sensing observations, and investments in future model development and intercomparison studies.


2018 ◽  
Vol 15 (16) ◽  
pp. 5203-5219 ◽  
Author(s):  
Guillaume Rousset ◽  
Florian De Boissieu ◽  
Christophe E. Menkes ◽  
Jérôme Lefèvre ◽  
Robert Frouin ◽  
...  

Abstract. Trichodesmium is the major nitrogen-fixing species in the western tropical South Pacific (WTSP) region, a hot spot of diazotrophy. Due to the paucity of in situ observations, remote-sensing methods for detecting Trichodesmium presence on a large scale have been investigated to assess the regional-to-global impact of this organism on primary production and carbon cycling. A number of algorithms have been developed to identify Trichodesmium surface blooms from space, but determining with confidence their accuracy has been difficult, chiefly because of the scarcity of sea-truth information at the time of satellite overpass. Here, we use a series of new cruises as well as airborne surveys over the WTSP to evaluate their ability to detect Trichodesmium surface blooms in the satellite imagery. The evaluation, performed on MODIS data at 250 m and 1 km resolution acquired over the region, shows limitations due to spatial resolution, clouds, and atmospheric correction. A new satellite-based algorithm is designed to alleviate some of these limitations, by exploiting optimally spectral features in the atmospherically corrected reflectance at 531, 645, 678, 748, and 869 nm. This algorithm outperforms former ones near clouds, limiting false positive detection and allowing regional-scale automation. Compared with observations, 80 % of the detected mats are within a 2 km range, demonstrating the good statistical skill of the new algorithm. Application to MODIS imagery acquired during the February-March 2015 OUTPACE campaign reveals the presence of surface blooms northwest and east of New Caledonia and near 20∘ S–172∘ W in qualitative agreement with measured nitrogen fixation rates. Improving Trichodesmium detection requires measuring ocean color at higher spectral and spatial (<250 m) resolution than MODIS, taking into account environment properties (e.g., wind, sea surface temperature), fluorescence, and spatial structure of filaments, and a better understanding of Trichodesmium dynamics, including aggregation processes to generate surface mats. Such sub-mesoscale aggregation processes for Trichodesmium are yet to be understood.


Atmosphere ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1599
Author(s):  
Linshan Tan ◽  
Kaiyuan Zheng ◽  
Qiangqiang Zhao ◽  
Yanjuan Wu

Understanding the spatial and temporal variations of evapotranspiration (ET) is vital for water resources planning and management and drought monitoring. The development of a satellite remote sensing technique is described to provide insight into the estimation of ET at a regional scale. In this study, the Surface Energy Balance Algorithm for Land (SEBAL) was used to calculate the actual ET on a daily scale from Landsat-8 data and daily ground-based meteorological data in the upper reaches of Huaihe River on 20 November 2013, 16 April 2015 and 23 March 2018. In order to evaluate the performance of the SEBAL model, the daily SEBAL ET (ETSEBAL) was compared against the daily reference ET (ET0) from four theoretical methods: the Penman-Monteith (P-M), Irmak-Allen (I-A), the Turc, and Jensen-Haise (J-H) method, the ETMOD16 product from the MODerate Resolution Imaging Spectrometer (MOD16) and the ETVIC from Variable Infiltration Capacity Model (VIC). A linear regression equation and statistical indices were used to model performance evaluation. The results showed that the daily ETSEBAL correlated very well with the ET0, ETMOD16, and ETVIC, and bias between the ETSEBAL with them was less than 1.5%. In general, the SEBAL model could provide good estimations in daily ET over the study region. In addition, the spatial-temporal distribution of ETSEBAL was explored. The variation of ETSEBAL was significant in seasons with high values during the growth period of vegetation in March and April and low values in November. Spatially, the daily ETSEBAL values in the mountain area were much higher than those in the plain areas over the study region. The variability of ETSEBAL in this study area was positively correlated with elevation and negatively correlated with surface reflectance, which implies that elevation and surface reflectance are the important factors for predicting ET in this study area.


Sign in / Sign up

Export Citation Format

Share Document