scholarly journals A gridded data set of upper-ocean hydrographic properties in the Weddell Gyre obtained by objective mapping of Argo float measurements

2016 ◽  
Vol 8 (1) ◽  
pp. 15-40 ◽  
Author(s):  
K. A. Reeve ◽  
O. Boebel ◽  
T. Kanzow ◽  
V. Strass ◽  
G. Rohardt ◽  
...  
Keyword(s):  
Data Availability ◽  
Global Ocean ◽  
Data Sets ◽  
Data Set ◽  
Ice Shelves ◽  
Argo Float ◽  
Weddell Gyre ◽  
Mass Properties ◽  
Composite Maps ◽  
The Antarctic

Abstract. The Weddell Gyre plays a crucial role in the modification of climate by advecting heat poleward to the Antarctic ice shelves and by regulating the density of water masses that feed the lowest limb of the global ocean overturning circulation. However, our understanding of Weddell Gyre water mass properties is limited to regions of data availability, primarily along the Prime Meridian. The aim of this paper is to provide a data set of the upper water column properties of the entire Weddell Gyre. Objective mapping was applied to Argo float data in order to produce spatially gridded, time-composite maps of temperature and salinity for fixed pressure levels ranging from 50 to 2000 dbar, as well as temperature, salinity and pressure at the level of the sub-surface temperature maximum. While the data are currently too limited to incorporate time into the gridded structure, the data are extensive enough to produce maps of the entire region across three time-composite periods (2001–2005, 2006–2009 and 2010–2013), which can be used to determine how representative conclusions drawn from data collected along general RV transect lines are on a gyre scale perspective. The work presented here represents the technical prerequisite for addressing climatological research questions in forthcoming studies. The data sets are available in netCDF format at doi:10.1594/PANGAEA.842876.

scholarly journals Objective mapping of Argo data in the Weddell Gyre: a gridded dataset of upper ocean water properties

2015 ◽  
Vol 8 (1) ◽  
pp. 509-566 ◽  
Author(s):  
K. A. Reeve ◽  
O. Boebel ◽  
T. Kanzow ◽  
V. Strass ◽  
G. Rohardt ◽  
...  
Keyword(s):  
Data Availability ◽  
Global Ocean ◽  
Data Sets ◽  
Argo Data ◽  
Ice Shelves ◽  
Weddell Gyre ◽  
Mass Properties ◽  
Composite Maps ◽  
The Antarctic ◽  
Density Of Water

Abstract. The Weddell Gyre plays a crucial role in the modification of climate by advecting heat poleward to the Antarctic ice shelves and by regulating the density of water masses that feed the lowest limb of the global ocean overturning circulation. However, our understanding of Weddell Gyre water mass properties is limited to regions of data availability, primarily along the Prime Meridian. The aim of this paper is to provide a dataset of the upper water column properties of the entire Weddell Gyre. Objective mapping was applied to Argo float data in order to produce spatially gridded, time composite maps of temperature and salinity for fixed pressure levels ranging from 50 to 2000 dbar, as well as temperature, salinity and pressure at the level of the sub-surface temperature maximum. While the data are currently too limited to incorporate time into the gridded structure, the data are extensive enough to produce maps of the entire region across three time composite periods (2002–2005, 2006–2009 and 2010–2013), which can be used to determine how representative conclusions drawn from data collected along general RV transect lines are on a gyre scale perspective. The work presented here represents the technical prerequisite in addressing climatological research questions in forthcoming studies. These data sets are available in netCDF format at doi:10.1594/PANGAEA.842876.

scholarly journals A global high-resolution data set of ice sheet topography, cavity geometry and ocean bathymetry

2016 ◽  
Author(s):  
Janin Schaffer ◽  
Ralph Timmermann ◽  
Jan Erik Arndt ◽  
Steen Savstrup Kristensen ◽  
Christoph Mayer ◽  
...  
Keyword(s):  
High Resolution ◽  
Continental Shelf ◽  
Ice Sheet ◽  
The Arctic ◽  
Global Ocean ◽  
Data Set ◽  
Antarctic Ice Sheet ◽  
Ice Shelves ◽  
Surface Topographies ◽  
The Antarctic

Abstract. The ocean plays an important role in modulating the mass balance of the polar ice sheets by interacting with the ice shelves in Antarctica and with the marine-terminating outlet glaciers in Greenland. Given that the flux of warm water onto the continental shelf and into the sub-ice cavities is steered by complex bathymetry, a detailed topography data set is an essential ingredient for models that address ice-ocean interaction. We followed the spirit of the global RTopo-1 data set and compiled consistent maps of global ocean bathymetry, upper and lower ice surface topographies and global surface height on a spherical grid with now 30-arc seconds resolution. We used the General Bathymetric Chart of the Oceans (GEBCO_2014) as the backbone and added the International Bathymetric Chart of the Arctic Ocean version 3 (IBCAOv3) and the International Bathymetric Chart of the Southern Ocean (IBCSO) version 1. While RTopo-1 primarily aimed at a good and consistent representation of the Antarctic ice sheet, ice shelves and sub-ice cavities, RTopo-2 now also contains ice topographies of the Greenland ice sheet and outlet glaciers. In particular, we aimed at a good representation of the fjord and shelf bathymetry surrounding the Greenland continent. We corrected data from earlier gridded products in the areas of Petermann Glacier, Hagen Bræ and Sermilik Fjord assuming that sub-ice and fjord bathymetries roughly follow plausible Last Glacial Maximum ice flow patterns. For the continental shelf off northeast Greenland and the floating ice tongue of Nioghalvfjerdsfjorden Glacier at about 79° N, we incorporated a high-resolution digital bathymetry model considering original multibeam survey data for the region. Radar data for surface topographies of the floating ice tongues of Nioghalvfjerdsfjorden Glacier and Zachariæ Isstrøm have been obtained from the data centers of Technical University of Denmark (DTU), Operation Icebridge (NASA/NSF) and Alfred Wegener Institute (AWI). For the Antarctic ice sheet/ice shelves, RTopo-2 largely relies on the Bedmap-2 product but applies corrections for the geometry of Getz, Abbot and Fimbul ice shelf cavities. The data set is available in full and in regional subsets in NetCDF format from the PANGAEA database at https://doi.pangaea.de/10.1594/PANGAEA.856844.

Measured properties of the Antarctic ice sheet derived from the SCAR Antarctic digital database

Polar Record ◽  
1994 ◽  
Vol 30 (174) ◽  
pp. 201-206 ◽  
Author(s):  
Adrian J. Fox ◽  
A. Paul ◽  
R. Cooper
Keyword(s):  
Source Material ◽  
Descriptive Statistics ◽  
Data Sets ◽  
Data Set ◽  
Antarctic Ice Sheet ◽  
Original Source ◽  
Ice Shelves ◽  
Digital Database ◽  
Constituent Feature ◽  
The Antarctic

AbstractThe completion of the SCAR Antarctic digital database (ADD) has provided a new basis for statistical calculations for Antarctica: data-sets are available at the scale of the original source material, and generalised to 1:1,000,000, 1:3,000,000, 1:10,000,000, and 1:30,000,000. The new descriptive statistics presented are based on the ADD 1:1,000,000 data-set since this is the largest scale at which source maps provided complete cover of the coastline and ice-free areas. The statistics include the total length and proportions of coastline types and the total area of Antarctica with the proportions of its constituent feature types. The areas of the Ross and Filchner-Ronne ice shelves have also been computed. Whilst the total area of Antarctica has remained static compared with previous studies, the relative proportions of coastline types and constituent feature types within the total area show significant changes. In particular the calculated area of ice-free ground is only approximately one-seventh of that often quoted from previous studies. The changes reported result from improved mapping, reinterpretation of data, and actual changes of coastline.

scholarly journals A global, high-resolution data set of ice sheet topography, cavity geometry, and ocean bathymetry

2016 ◽  
Vol 8 (2) ◽  
pp. 543-557 ◽  
Author(s):  
Janin Schaffer ◽  
Ralph Timmermann ◽  
Jan Erik Arndt ◽  
Steen Savstrup Kristensen ◽  
Christoph Mayer ◽  
...  
Keyword(s):  
High Resolution ◽  
Continental Shelf ◽  
Ice Sheet ◽  
The Arctic ◽  
Global Ocean ◽  
Data Set ◽  
Antarctic Ice Sheet ◽  
Ice Shelves ◽  
Surface Topographies ◽  
The Antarctic

Abstract. The ocean plays an important role in modulating the mass balance of the polar ice sheets by interacting with the ice shelves in Antarctica and with the marine-terminating outlet glaciers in Greenland. Given that the flux of warm water onto the continental shelf and into the sub-ice cavities is steered by complex bathymetry, a detailed topography data set is an essential ingredient for models that address ice–ocean interaction. We followed the spirit of the global RTopo-1 data set and compiled consistent maps of global ocean bathymetry, upper and lower ice surface topographies, and global surface height on a spherical grid with now 30 arcsec grid spacing. For this new data set, called RTopo-2, we used the General Bathymetric Chart of the Oceans (GEBCO_2014) as the backbone and added the International Bathymetric Chart of the Arctic Ocean version 3 (IBCAOv3) and the International Bathymetric Chart of the Southern Ocean (IBCSO) version 1. While RTopo-1 primarily aimed at a good and consistent representation of the Antarctic ice sheet, ice shelves, and sub-ice cavities, RTopo-2 now also contains ice topographies of the Greenland ice sheet and outlet glaciers. In particular, we aimed at a good representation of the fjord and shelf bathymetry surrounding the Greenland continent. We modified data from earlier gridded products in the areas of Petermann Glacier, Hagen Bræ, and Sermilik Fjord, assuming that sub-ice and fjord bathymetries roughly follow plausible Last Glacial Maximum ice flow patterns. For the continental shelf off Northeast Greenland and the floating ice tongue of Nioghalvfjerdsfjorden Glacier at about 79° N, we incorporated a high-resolution digital bathymetry model considering original multibeam survey data for the region. Radar data for surface topographies of the floating ice tongues of Nioghalvfjerdsfjorden Glacier and Zachariæ Isstrøm have been obtained from the data centres of Technical University of Denmark (DTU), Operation Icebridge (NASA/NSF), and Alfred Wegener Institute (AWI). For the Antarctic ice sheet/ice shelves, RTopo-2 largely relies on the Bedmap-2 product but applies corrections for the geometry of Getz, Abbot, and Fimbul ice shelf cavities. The data set is available in full and in regional subsets in NetCDF format from the PANGAEA database at doi:10.1594/PANGAEA.856844.

A new method for characterising the Antarctic Circumpolar Currents using Argo float temperature and salinity profiles

2020 ◽  
Author(s):  
Luke Roberts ◽  
Rhiannon Jones ◽  
Matthew Donnelly ◽  
Katharine Hendry
Keyword(s):  
High Resolution ◽  
Southern Ocean ◽  
Data Processing ◽  
Rapid Development ◽  
Regional Scale ◽  
Global Ocean ◽  
Argo Float ◽  
Oceanographic Data ◽  
The University ◽  
The Antarctic

<p>Argo is an array of automated profiling floats, which have allowed the rapid development of high-resolution and high-quality oceanographic data acquisition. The international program has been in operation since the 1990s providing continuous hydrographic data globally. There are now over a million individual float profiles, contributing to our understanding of global ocean physical properties, such as circulation processes at both a local and regional scale. With these innovations come the challenges of data processing, and compilation of user-friendly data products. For example, the Southern Ocean is a critical region that modulates our climate, via heat exchange, carbon storage, biogeochemistry, and primary productivity. An improved quantified understanding of Southern Ocean currents, informed by Argo, must be implemented in policy-relevant high-resolution climate models to advance our understanding of future change.</p><p> </p><p>In May 2019, a new collaboration was formed between the Southern Ocean Argo Resource Centre (British Oceanographic Data Centre) and the University of Bristol. The aims were two-fold: to produce a method for characterising Southern Ocean frontal zones using Argo floats, and to train early career researchers in the University sector in data processing and management. We have created a publicly available code that characterises physical features of the Antarctic Circumpolar Current using Argo float profiles, using minimal software, and without the need to access high-performance computers. The code categorises each profile based on the temperature and salinity ‘fingerprints’ of zones between each Southern Ocean front. This allows the user to produce output surface plots from user-specified time-slices and geographic areas, and so compare frontal movement in time and space.</p>

Interpolating wide-aperture ground-penetrating radar beyond aliasing

Geophysics ◽  
2015 ◽  
Vol 80 (2) ◽  
pp. H13-H22 ◽  
Author(s):  
Saulo S. Martins ◽  
Jandyr M. Travassos
Keyword(s):  
Ground Penetrating Radar ◽  
Real Data ◽  
Velocity Model ◽  
Data Sets ◽  
Inversion Problem ◽  
Data Set ◽  
Isolated Points ◽  
Antarctic Continent ◽  
Ground Penetrating ◽  
The Antarctic

Most of the data acquisition in ground-penetrating radar is done along fixed-offset profiles, in which velocity is known only at isolated points in the survey area, at the locations of variable offset gathers such as a common midpoint. We have constructed sparse, heavily aliased, variable offset gathers from several fixed-offset, collinear, profiles. We interpolated those gathers to produce properly sampled counterparts, thus pushing data beyond aliasing. The interpolation methodology estimated nonstationary, adaptive, filter coefficients at all trace locations, including at the missing traces’ corresponding positions, filled with zeroed traces. This is followed by an inversion problem that uses the previously estimated filter coefficients to insert the new, interpolated, traces between the original ones. We extended this two-step strategy to data interpolation by employing a device in which we used filter coefficients from a denser variable offset gather to interpolate the missing traces on a few independently constructed gathers. We applied the methodology on synthetic and real data sets, the latter acquired in the interior of the Antarctic continent. The variable-offset interpolated data opened the door to prestack processing, making feasible the production of a prestack time migrated section and a 2D velocity model for the entire profile. Notwithstanding, we have used a data set obtained in Antarctica; there is no reason the same methodology could not be used somewhere else.

scholarly journals Revising the retrieval technique of a long-term stratospheric HNO<sub>3</sub> data set: from a constrained matrix inversion to the optimal estimation algorithm

2011 ◽  
Vol 29 (7) ◽  
pp. 1317-1330 ◽  
Author(s):  
I. Fiorucci ◽  
G. Muscari ◽  
R. L. de Zafra
Keyword(s):  
Optimal Estimation ◽  
Matrix Inversion ◽  
The Arctic ◽  
Inversion Method ◽  
Data Sets ◽  
Vertical Profiles ◽  
Mixing Ratio ◽  
Data Set ◽  
The Antarctic

Abstract. The Ground-Based Millimeter-wave Spectrometer (GBMS) was designed and built at the State University of New York at Stony Brook in the early 1990s and since then has carried out many measurement campaigns of stratospheric O3, HNO3, CO and N2O at polar and mid-latitudes. Its HNO3 data set shed light on HNO3 annual cycles over the Antarctic continent and contributed to the validation of both generations of the satellite-based JPL Microwave Limb Sounder (MLS). Following the increasing need for long-term data sets of stratospheric constituents, we resolved to establish a long-term GMBS observation site at the Arctic station of Thule (76.5° N, 68.8° W), Greenland, beginning in January 2009, in order to track the long- and short-term interactions between the changing climate and the seasonal processes tied to the ozone depletion phenomenon. Furthermore, we updated the retrieval algorithm adapting the Optimal Estimation (OE) method to GBMS spectral data in order to conform to the standard of the Network for the Detection of Atmospheric Composition Change (NDACC) microwave group, and to provide our retrievals with a set of averaging kernels that allow more straightforward comparisons with other data sets. The new OE algorithm was applied to GBMS HNO3 data sets from 1993 South Pole observations to date, in order to produce HNO3 version 2 (v2) profiles. A sample of results obtained at Antarctic latitudes in fall and winter and at mid-latitudes is shown here. In most conditions, v2 inversions show a sensitivity (i.e., sum of column elements of the averaging kernel matrix) of 100 ± 20 % from 20 to 45 km altitude, with somewhat worse (better) sensitivity in the Antarctic winter lower (upper) stratosphere. The 1σ uncertainty on HNO3 v2 mixing ratio vertical profiles depends on altitude and is estimated at ~15 % or 0.3 ppbv, whichever is larger. Comparisons of v2 with former (v1) GBMS HNO3 vertical profiles, obtained employing the constrained matrix inversion method, show that v1 and v2 profiles are overall consistent. The main difference is at the HNO3 mixing ratio maximum in the 20–25 km altitude range, which is smaller in v2 than v1 profiles by up to 2 ppbv at mid-latitudes and during the Antarctic fall. This difference suggests a better agreement of GBMS HNO3 v2 profiles with both UARS/ and EOS Aura/MLS HNO3 data than previous v1 profiles.

scholarly journals A multi-decade record of high-quality fCO<sub>2</sub> data in version 3 of the Surface Ocean CO<sub>2</sub> Atlas (SOCAT)

2016 ◽  
Author(s):  
Dorothee C. E. Bakker ◽  
Benjamin Pfeil ◽  
Camilla S. Landa ◽  
Nicolas Metzl ◽  
Kevin M. O'Brien ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Surface Water ◽  
Data Collection ◽  
Data Availability ◽  
Data Sets ◽  
Science Data ◽  
High Quality ◽  
Data Set ◽  
Surface Ocean ◽  
Biogeochemical Models

Abstract. The Surface Ocean CO2 Atlas (SOCAT) is a synthesis of quality-controlled fCO2 (fugacity of carbon dioxide) values for the global surface oceans and coastal seas with regular updates. Version 3 of SOCAT has 14.5 million fCO2 values from 3646 data sets covering the years 1957 to 2014. This latest version has an additional 4.4 million fCO2 values relative to version 2 and extends the record from 2011 to 2014. Version 3 also significantly increases the data availability for 2005 to 2013. SOCAT has an average of approximately 1.2 million surface water fCO2 values per year for the years 2006 to 2012. Quality and documentation of the data has improved. A new feature is the data set quality control (QC) flag of E for data from alternative sensors and platforms. The accuracy of surface water fCO2 has been defined for all data set QC flags. Automated range checking has been carried out for all data sets during their upload into SOCAT. The upgrade of the interactive Data Set Viewer (previously known as the Cruise Data Viewer) allows better interrogation of the SOCAT data collection and rapid creation of high-quality figures for scientific presentations. Automated data upload has been launched for version 4 and will enable more frequent SOCAT releases in the future. High-profile scientific applications of SOCAT include quantification of the ocean sink for atmospheric carbon dioxide and its long-term variation, detection of ocean acidification, as well as evaluation of coupled-climate and ocean-only biogeochemical models. Users of SOCAT data products are urged to acknowledge the contribution of data providers, as stated in the SOCAT Fair Data Use Statement. This ESSD (Earth System Science Data) "Living Data" publication documents the methods and data sets used for the assembly of this new version of the SOCAT data collection and compares these with those used for earlier versions of the data collection (Pfeil et al., 2013; Sabine et al., 2013; Bakker et al., 2014).

scholarly journals The SPARC water vapour assessment II: Comparison of stratospheric and lower mesospheric water vapour time series observed from satellites

2018 ◽  
Author(s):  
Farahnaz Khosrawi ◽  
Stefan Lossow ◽  
Gabriele P. Stiller ◽  
Karen H. Rosenlof ◽  
Joachim Urban ◽  
...  
Keyword(s):  
Time Series ◽  
Water Vapour ◽  
Data Sets ◽  
Data Set ◽  
The Future ◽  
Modelling Studies ◽  
The Difference ◽  
The Tropics ◽  
The Antarctic ◽  
Satellite Instruments

Abstract. Time series of stratospheric and lower mesospheric water vapour using 33 data sets from 15 different satellite instruments were compared in the framework of the second SPARC (Stratosphere-troposphere Processes And their Role in Climate) water vapour assessment (WAVAS-II). This comparison aimed to provide a comprehensive overview of the typical uncertainties in the observational database that can be considered in the future in observational and modelling studies addressing e.g stratospheric water vapour trends. The time series comparisons are presented for the three latitude bands, the Antarctic (80°–70° S), the tropics (15° S–15° N) and the northern hemisphere mid-latitudes (50° N–60° N) at four different altitudes (0.1, 3, 10 and 80 hPa) covering the stratosphere and lower mesosphere. The combined temporal coverage of observations from the 15 satellite instruments allowed considering the time period 1986–2014. In addition to the qualitative comparison of the time series, the agreement of the data sets is assessed quantitatively in the form of the spread (i.e. the difference between the maximum and minimum volume mixing ratio among the data sets), the (Pearson) correlation coefficient and the drift (i.e. linear changes of the difference between time series over time). Generally, good agreement between the time series was found in the middle stratosphere while larger differences were found in the lower mesosphere and near the tropopause. Concerning the latitude bands, the largest differences were found in the Antarctic while the best agreement was found for the tropics. From our assessment we find that all data sets can be considered in the future in observational and modelling studies addressing e.g. stratospheric and lower mesospheric water vapour variability and trends when data set specific characteristics (e.g. a drift) and restrictions (e.g. temporal and spatial coverage) are taken into account.

scholarly journals Satellite Passive Microwave Sea-Ice Concentration Data Set Intercomparison: Closed Ice and Ship-Based Observations

2019 ◽  
Author(s):  
Stefan Kern ◽  
Thomas Lavergne ◽  
Dirk Notz ◽  
Leif Toudal Pedersen ◽  
Rasmus Tage Tonboe ◽  
...  
Keyword(s):  
Sea Ice ◽  
The Arctic ◽  
Data Sets ◽  
Sea Ice Concentration ◽  
Data Set ◽  
Group I ◽  
Ice Concentration ◽  
Data Products ◽  
Group Ii ◽  
The Antarctic

Abstract. Accurate sea-ice concentration (SIC) data are a pre-requisite to reliably monitor the polar sea-ice covers. Over the last four decades, many algorithms have been developed to retrieve the SIC from satellite microwave radiometry, some of them applied to generate long-term data products. We report on results of a systematic inter-comparison of ten global SIC data products at 12.5 to 50.0 km grid resolution for both the Arctic and the Antarctic. The products are compared with each other with respect to differences in SIC, sea-ice area (SIA), and sea-ice extent (SIE), and they are compared against a global winter-time near-100 % reference SIC data set for closed pack ice conditions and against global year-round ship-based visual observations of the sea-ice cover. We can group the products based on the observed inter-product consistency and differences of the inter-comparison results. Group I consists of data sets using the self-optimizing EUMETSAT-OSISAF – ESA-CCI algorithms. Group II includes data using the NASA-Team 2 and Comiso-Bootstrap algorithms, and the NOAA-NSIDC sea-ice concentration climate data record (CDR). The standard NASA-Team and the ARTIST Sea Ice (ASI) algorithms are put into a separate group III because of their often quite diverse results. Within group I and II evaluation results and intra-product differences are mostly very similar. For instance, among group I products, SIA agrees within ±100 000 km2 in both hemispheres during maximum and minimum sea-ice cover. Among group II products, satellite- minus ship-based SIC differences agree within ±0.7 %. Standing out with large negative differences to other products and evaluation data is the standard NASA-Team algorithm, in both hemispheres. The three CDRs of group I (SICCI-25km, SICCI-50km, and OSI-450) are biased low compared to the 100 % reference SIC with biases of −0.4 % to −1.0 % (Arctic) and −0.3 % to −1.1 % (Antarctic). Products of group II appear to be mostly biased high in the Arctic by between +1.0 % and +3.5 %, while their biases in the Antarctic only range from −0.2  to +0.9 %. The standard deviation is smaller in the Arctic for the quoted group I products: 1.9 % to 2.9 % and Antarctic: 2.5 % to 3.1 %, than for group II products: Arctic: 3.6 % to 5.0 %, Antarctic: 4.5 % to 5.4 %. Products of group I exhibit larger overall satellite- minus ship-based SIC differences than group II in both hemispheres. However, compared to group II, group I products’ standard deviations are smaller, correlations higher and evaluation results are less sensitive to seasonal changes. We discuss the impact of truncating the SIC distribution, as naturally retrieved by the algorithms around the 100 % sea-ice concentration end. We show that evaluation studies of such truncated SIC products can result in misleading statistics and favour data sets that systematically overestimate SIC. We describe a method to re-construct the un-truncated distribution of SIC before the evaluation is performed. On the basis of this evaluation, we open a discussion about the overestimation of SIC in data products, with far-reaching consequences for, e.g., surface heat-flux estimations in winter. We also document inconsistencies in the behaviour of the weather filters used in products of group II, and suggest advancing studies about the influence of these weather filters on SIA and SIE time-series and their trends.

Sign in / Sign up

Export Citation Format

Share Document