scholarly journals Intercomparison of Antarctic ice-shelf, ocean, and sea-ice interactions simulated by MetROMS-iceshelf and FESOM 1.4

2018 ◽  
Vol 11 (4) ◽  
pp. 1257-1292 ◽  
Author(s):  
Kaitlin A. Naughten ◽  
Katrin J. Meissner ◽  
Benjamin K. Galton-Fenzi ◽  
Matthew H. England ◽  
Ralph Timmermann ◽  
...  
Keyword(s):  
Southern Ocean ◽  
Sea Ice ◽  
Water Mass ◽  
Horizontal Resolution ◽  
Ocean Model ◽  
Small Scale ◽  
Ice Shelf ◽  
Vertical Coordinate ◽  
Ice Shelves ◽  
Basal Melting

Abstract. An increasing number of Southern Ocean models now include Antarctic ice-shelf cavities, and simulate thermodynamics at the ice-shelf/ocean interface. This adds another level of complexity to Southern Ocean simulations, as ice shelves interact directly with the ocean and indirectly with sea ice. Here, we present the first model intercomparison and evaluation of present-day ocean/sea-ice/ice-shelf interactions, as simulated by two models: a circumpolar Antarctic configuration of MetROMS (ROMS: Regional Ocean Modelling System coupled to CICE: Community Ice CodE) and the global model FESOM (Finite Element Sea-ice Ocean Model), where the latter is run at two different levels of horizontal resolution. From a circumpolar Antarctic perspective, we compare and evaluate simulated ice-shelf basal melting and sub-ice-shelf circulation, as well as sea-ice properties and Southern Ocean water mass characteristics as they influence the sub-ice-shelf processes. Despite their differing numerical methods, the two models produce broadly similar results and share similar biases in many cases. Both models reproduce many key features of observations but struggle to reproduce others, such as the high melt rates observed in the small warm-cavity ice shelves of the Amundsen and Bellingshausen seas. Several differences in model design show a particular influence on the simulations. For example, FESOM's greater topographic smoothing can alter the geometry of some ice-shelf cavities enough to affect their melt rates; this improves at higher resolution, since less smoothing is required. In the interior Southern Ocean, the vertical coordinate system affects the degree of water mass erosion due to spurious diapycnal mixing, with MetROMS' terrain-following coordinate leading to more erosion than FESOM's z coordinate. Finally, increased horizontal resolution in FESOM leads to higher basal melt rates for small ice shelves, through a combination of stronger circulation and small-scale intrusions of warm water from offshore.

scholarly journals Intercomparison of Antarctic ice shelf, ocean, and sea ice interactions simulated by two models

2017 ◽  
Author(s):  
Kaitlin A. Naughten ◽  
Katrin J. Meissner ◽  
Benjamin K. Galton-Fenzi ◽  
Matthew H. England ◽  
Ralph Timmermann ◽  
...  
Keyword(s):  
Southern Ocean ◽  
Sea Ice ◽  
Water Mass ◽  
Horizontal Resolution ◽  
Ocean Model ◽  
Small Scale ◽  
Ice Shelf ◽  
Vertical Coordinate ◽  
Ice Shelves ◽  
Basal Melting

Abstract. An increasing number of Southern Ocean models now include Antarctic ice shelf cavities, and simulate thermodynamics at the ice-shelf/ocean interface. This adds another level of complexity to Southern Ocean simulations, as ice shelves interact directly with the ocean and indirectly with sea ice. Here we present the first published model intercomparison and evaluation of present-day ocean/sea-ice/ice-shelf interactions, as simulated by two models: a circumpolar Antarctic configuration of MetROMS (ROMS: Regional Ocean Modelling System coupled to CICE: Community Ice CodE) and the global model FESOM (Finite Element Sea-ice/ice-shelf Ocean Model), where the latter is run at two different levels of horizontal resolution. From a circumpolar Antarctic perspective, we compare and evaluate simulated ice shelf basal melting and sub-ice shelf circulation, as well as sea ice properties and Southern Ocean water mass characteristics as they influence the sub-ice shelf processes. Despite their differing numerical methods, the two models produce broadly similar results, and share similar biases in many cases. Both models reproduce many key features of observations, but struggle to reproduce others, such as the high melt rates observed in the small warm-cavity ice shelves of the Amundsen and Bellingshausen Seas. Several differences in model design show a particular influence on the simulations. For example, FESOM's greater topographic smoothing can alter the geometry of some ice shelf cavities enough to affect their melt rates; this improves at higher resolution, since less smoothing is required. In the interior Southern Ocean, the vertical coordinate system affects the degree of water mass erosion due to spurious diapycnal mixing, with MetROMS' terrain-following coordinates leading to more erosion than FESOM's z-coordinates. Finally, increased horizontal resolution in FESOM leads to higher basal melt rates for small ice shelves, through a combination of stronger circulation and small-scale intrusions of warm water from offshore.

scholarly journals Ice-shelf basal melting in a global finite-element sea-ice/ice-shelf/ocean model

2012 ◽  
Vol 53 (60) ◽  
pp. 303-314 ◽  
Author(s):  
R. Timmermann ◽  
Q. Wang ◽  
H.H. Hellmer
Keyword(s):  
Finite Element ◽  
Sea Ice ◽  
Cold Water ◽  
Ocean Model ◽  
Weddell Sea ◽  
Global Ocean ◽  
Ice Shelf ◽  
Amundsen Sea ◽  
Vertical Coordinate ◽  
Ice Shelves

AbstractThe Finite Element Sea-ice Ocean Model (FESOM) has been augmented by an ice-shelf component with a three-equation system for diagnostic computation of boundary layer temperature and salinity. Ice-shelf geometry and global ocean bathymetry have been derived from the RTopo-1 dataset. A global domain with a triangular mesh and a hybrid vertical coordinate is used. To evaluate sub-ice-shelf circulation and melt rates for present-day climate, the model is forced with NCEP reanalysis data. Basal mass fluxes are mostly realistic, with maximum melt rates in the deepest parts near the grounding lines and marine ice formation in the northern sectors of the Ross and Filchner–Ronne Ice Shelves, Antarctica. Total basal mass loss for the ten largest ice shelves reflects the importance of the Amundsen Sea ice shelves; the Getz Ice Shelf is shown to be a major meltwater contributor to the Southern Ocean. Despite their modest melt rates, the ‘cold water’ ice shelves in the Weddell Sea are still substantial sinks of continental ice in Antarctica. Discrepancies between the model and observations can partly be attributed to deficiencies in the forcing data or to (sometimes unavoidable) smoothing of ice-shelf and bottom topographies.

scholarly journals Formation, Flow, and Disintegration Of Ice Shelves

1979 ◽  
Vol 24 (90) ◽  
pp. 259-271 ◽  
Author(s):  
G. De Q. Robin
Keyword(s):  
Sea Ice ◽  
Thick Layer ◽  
Big Bang ◽  
Bottom Surface ◽  
Minor Importance ◽  
Ice Shelf ◽  
Creep Failure ◽  
Ice Shelves ◽  
Basal Melting ◽  
Inland Ice

AbstractIce shelves may develop either by continued thickening of sea ice that is held fast to the shore, or by the seaward extension of inland ice. For both processes, as well as for an understanding of ablation and of accumulation at the bottom surface of ice shelves, we need to understand melting and freezing processes in relation to salinity, temperature, and pressure. Consideration of these factors shows that basal melting beneath the thicker parts of ice shelves is much greater than is generally appreciated. This could be sufficient to bring the estimated mass balance of Antarctica into approximate equilibrium. It appears that most Antarctic ice shelves are dependent on the supply of inland ice for their continued existence. However the thick layer of sea ice beneath the Amery Ice Shelf is readily explained in terms of sub-ice water circulation.Transport of heat and mass by water motion beneath ice shelves has the potential to change ice thicknesses by similar amounts to that caused by internal deformation of the ice shelf. Bottom freezing due to thermal conduction throughout the ice shelf is of minor importance.While attention is drawn to the basic equations for flow of ice shelves, it is pointed out that they have yet to be applied satisfactorily to the problem of iceberg calving. This appears from field observations to be due primarily to creep failure of spreading ice shelves, possibly aided by impact from floating icebergs. Recent observations show the effectiveness and likely quantitative importance of this “big bang” theory of iceberg formation in Antarctica.A brief discussion of the effects of climatic change on the disintegration of ice shelves is presented.

The sensitivity of sea ice growth to the choice of ice shelf-ocean coupling algorithms.

2020 ◽  
Author(s):  
Stefan Jendersie ◽  
Alena Malyarenko
Keyword(s):  
Sea Ice ◽  
Ocean Model ◽  
Data Sets ◽  
Ice Shelf ◽  
Ice Shelves ◽  
Ice Growth ◽  
Continental Scale ◽  
Complex Models ◽  
Coupling Algorithms ◽  
The Impact

<p>To quantify Antarctic ice mass loss and the subsequent sea level rise the geophysical modelling community is pushing towards frameworks that fully couple increasingly complex models of atmosphere, ocean, sea ice and ice sheets & shelves.  One particular hurdle remains the accurate representation of the vertical ocean-ice interaction at the base of ice shelves.  Parameterizations that are tuned to particular data sets naturally perform best in comparable ice shelf cavity environments. This poses the challenge in continental scale ocean-ice shelf models to chose one melt parameterizaton that performs sufficiently well in diverse cavity environment.  Thus adding uncertainty in ice shelf induced ocean freshening crucially affects modelled sea ice growth.  The impact magnitude of ice shelf supplied melt water on growth rates, thickness and extent of sea ice in the open ocean is currently debated in the literature.  <br>We reviewed and compared 16 commonly utilized melting/freezing parameterizations in coupled ocean-ice shelf models.  Melt rates differ hugely, in identical idealized conditions between 0.1m/yr to 3m/yr.  In this talk we present results of a realistic circum-Antarctic ice shelf and sea ice coupled ocean model (CICE, ROMS), where we look at the effects of the chosen ice shelf melt parameterization on modeled sea surface conditions and sea ice growth, regionally and circum Antarctic.</p>

scholarly journals Ocean processes at the Antarctic continental slope

2014 ◽  
Vol 372 (2019) ◽  
pp. 20130047 ◽  
Author(s):  
Karen J. Heywood ◽  
Sunke Schmidtko ◽  
Céline Heuzé ◽  
Jan Kaiser ◽  
Timothy D. Jickells ◽  
...  
Keyword(s):  
Southern Ocean ◽  
Continental Shelf ◽  
Continental Slope ◽  
Climate Models ◽  
Water Mass ◽  
Ocean Model ◽  
Shelf Break ◽  
Small Scale ◽  
Exchange Processes ◽  
The Antarctic

The Antarctic continental shelves and slopes occupy relatively small areas, but, nevertheless, are important for global climate, biogeochemical cycling and ecosystem functioning. Processes of water mass transformation through sea ice formation/melting and ocean–atmosphere interaction are key to the formation of deep and bottom waters as well as determining the heat flux beneath ice shelves. Climate models, however, struggle to capture these physical processes and are unable to reproduce water mass properties of the region. Dynamics at the continental slope are key for correctly modelling climate, yet their small spatial scale presents challenges both for ocean modelling and for observational studies. Cross-slope exchange processes are also vital for the flux of nutrients such as iron from the continental shelf into the mixed layer of the Southern Ocean. An iron-cycling model embedded in an eddy-permitting ocean model reveals the importance of sedimentary iron in fertilizing parts of the Southern Ocean. Ocean gliders play a key role in improving our ability to observe and understand these small-scale processes at the continental shelf break. The Gliders: Excellent New Tools for Observing the Ocean (GENTOO) project deployed three Seagliders for up to two months in early 2012 to sample the water to the east of the Antarctic Peninsula in unprecedented temporal and spatial detail. The glider data resolve small-scale exchange processes across the shelf-break front (the Antarctic Slope Front) and the front's biogeochemical signature. GENTOO demonstrated the capability of ocean gliders to play a key role in a future multi-disciplinary Southern Ocean observing system.

scholarly journals Simulated melt rates for the Totten and Dalton ice shelves

Ocean Science ◽  
2014 ◽  
Vol 10 (3) ◽  
pp. 267-279 ◽  
Author(s):  
D. E. Gwyther ◽  
B. K. Galton-Fenzi ◽  
J. R. Hunter ◽  
J. L. Roberts
Keyword(s):  
Mass Loss ◽  
Current Flow ◽  
Ocean Model ◽  
Warm Water ◽  
Coastal Current ◽  
Ice Shelf ◽  
Ice Shelves ◽  
Oceanic Forcing ◽  
Basal Melting ◽  
Continental Shelf Break

Abstract. The Totten Glacier is rapidly losing mass. It has been suggested that this mass loss is driven by changes in oceanic forcing; however, the details of the ice–ocean interaction are unknown. Here we present results from an ice shelf–ocean model of the region that includes the Totten, Dalton and Moscow University ice shelves, based on the Regional Oceanic Modeling System for the period 1992–2007. Simulated area-averaged basal melt rates (net basal mass loss) for the Totten and Dalton ice shelves are 9.1 m ice yr−1 (44.5 Gt ice yr−1) and 10.1 m ice yr−1 (46.6 Gt ice yr−1), respectively. The melting of the ice shelves varies strongly on seasonal and interannual timescales. Basal melting (mass loss) from the Totten ice shelf spans a range of 5.7 m ice yr−1 (28 Gt ice yr−1) on interannual timescales and 3.4 m ice yr−1 (17 Gt ice yr−1) on seasonal timescales. This study links basal melt of the Totten and Dalton ice shelves to warm water intrusions across the continental shelf break and atmosphere–ocean heat exchange. Totten ice shelf melting is high when the nearby Dalton polynya interannual strength is below average, and vice versa. Melting of the Dalton ice shelf is primarily controlled by the strength of warm water intrusions across the Dalton rise and into the ice shelf cavity. During periods of strong westward coastal current flow, Dalton melt water flows directly under the Totten ice shelf further reducing melting. This is the first such modelling study of this region to provide a valuable framework for directing future observational and modelling efforts.

Productivity and carbon export potential in the Weddell Sea, with a focus on the waters near Larsen C Ice Shelf

2020 ◽  
Author(s):  
Raquel Flynn ◽  
Jessica Burger ◽  
Shantelle Smith ◽  
Kurt Spence ◽  
Thomas Bornman ◽  
...  
Keyword(s):  
Southern Ocean ◽  
Sea Ice ◽  
Phytoplankton Community ◽  
Late Summer ◽  
Weddell Sea ◽  
Global Ocean ◽  
Ice Shelf ◽  
Carbon Export ◽  
Study Region ◽  
Ice Shelves

<p>Net primary production (NPP) is indicative of the energy available to an ecosystem, which is central to ecological functioning and biological carbon cycling. The Southern Ocean’s Weddell Sea (WS) represents a point of origin where water masses form and exchange with the atmosphere, thereby setting the physical and chemical conditions of much of the global ocean. The WS is particularly understudied near Larsen C Ice Shelf (LCIS) where harsh sea-ice conditions persist year-round. We measured size-fractionated rates of NPP, nitrogen (N; as nitrate, ammonium, and urea) uptake, and nitrification, and characterized the phytoplankton community at 19 stations in summer 2018/2019, mainly near LCIS, with a few stations in the open Weddell Gyre (WG) and at Fimbul Ice Shelf (FIS). Throughout the study region, NPP and N uptake were dominated by nanophytoplankton (3-20 μm), with microphytoplankton (>20 μm) becoming more abundant later in the season, particularly at FIS. Here, we observed high phytoplankton biomass and diversity, and the community was dominated by diatoms known to enhance carbon export (e.g., <em>Thalassiosira spp</em>.). At LCIS, by contrast, the community comprised mainly <em>Phaeocystis Antarctica</em>. In the open WG, a population of small and weakly-silicified diatoms of the genus <em>Corethron</em> dominated the phytoplankton community. Here, euphotic zone-integrated uptake rates were similar to those at LCIS even though the depth-specific rates were lower. Mixed-layer nitrification was below detection at all stations such that nitrate uptake can be used as a proxy for carbon export potential <em>sensu</em> the new production paradigm – this was highest near FIS in late summer. Our observations can be explained by melting sea ice near the ice shelves that supplies iron and enhances water column stratification, thus alleviating iron and/or light limitation of phytoplankton and allowing them to consume the abundant surface macronutrients. That the sea ice melted completely at FIS but not LCIS may explain why late-summer productivity and carbon export potential were highest near FIS, more than double the rates measured in early summer and near LCIS. The early-to-late summer progression near the ice shelves contrasts that of the open Southern Ocean where iron is depleted by late summer, driving a shift towards smaller phytoplankton that facilitate less carbon export.</p>

scholarly journals Modeling intensive ocean–cryosphere interactions in Lützow-Holm Bay, East Antarctica

2020 ◽  
Author(s):  
Kazuya Kusahara ◽  
Daisuke Hirano ◽  
Masakazu Fujii ◽  
Alexander D. Fraser ◽  
Takeshi Tamura
Keyword(s):  
Sea Ice ◽  
Bottom Topography ◽  
East Antarctica ◽  
Ice Shelf ◽  
Atlantic Sector ◽  
Ice Shelves ◽  
Water Intrusion ◽  
Fast Ice ◽  
Basal Melting ◽  
The Antarctic

Abstract. Basal melting of Antarctic ice shelves accounts for more than half of the mass loss from the Antarctic Ice Sheet. Many studies have focused on active basal melting at ice shelves in the Amundsen-Bellingshausen Seas and the Totten Ice shelf, East Antarctica. In these regions, the intrusion of Circumpolar Deep Water (CDW) onto the continental shelf is a key component for the localized intensive basal melting. Both regions have a common oceanographic feature: southward deflection of the Antarctic Circumpolar Current on the eastern flank of ocean gyres brings CDW onto the continental shelves. The physical setting of Shirase Glacier Tongue (SGT) in Lützow-Holm Bay corresponds to a similar configuration for the Weddell Gyre in the Atlantic sector. Here, we conduct a 2–3 km resolution simulation of an ocean-sea ice-ice shelf model using a newly-compiled bottom topography dataset in the bay. The model can reproduce the observed CDW intrusion along the deep trough. The modeled SGT basal melting reaches a peak in summer and minimum in autumn and winter, consistent with the wind-driven seasonality of the CDW thickness in the bay. The model results suggest the existence of eastward-flowing undercurrent on the upper continental slope in summer, and the undercurrent contributes to the seasonal-to-interannual variability of the warm water intrusion into the bay. Furthermore, numerical experiments with and without fast-ice cover in the bay demonstrate that fast ice plays a role as an effective thermal insulator and reduces local sea-ice formation, resulting in much warmer water intrusion into the SGT cavity.

scholarly journals Modeling intensive ocean–cryosphere interactions in Lützow-Holm Bay, East Antarctica

2021 ◽  
Vol 15 (4) ◽  
pp. 1697-1717
Author(s):  
Kazuya Kusahara ◽  
Daisuke Hirano ◽  
Masakazu Fujii ◽  
Alexander D. Fraser ◽  
Takeshi Tamura
Keyword(s):  
Sea Ice ◽  
Bottom Topography ◽  
East Antarctica ◽  
Ice Shelf ◽  
Atlantic Sector ◽  
Ice Shelves ◽  
Water Intrusion ◽  
Fast Ice ◽  
Basal Melting ◽  
The Antarctic

Abstract. Basal melting of Antarctic ice shelves accounts for more than half of the mass loss from the Antarctic ice sheet. Many studies have focused on active basal melting at ice shelves in the Amundsen–Bellingshausen seas and the Totten ice shelf, East Antarctica. In these regions, the intrusion of Circumpolar Deep Water (CDW) onto the continental shelf is a key component for the localized intensive basal melting. Both regions have a common oceanographic feature: southward deflection of the Antarctic Circumpolar Current brings CDW toward the continental shelves. The physical setting of the Shirase Glacier tongue (SGT) in Lützow-Holm Bay corresponds to a similar configuration on the southeastern side of the Weddell Gyre in the Atlantic sector. Here, we conduct a 2–3 km resolution simulation of an ocean–sea ice–ice shelf model using a recently compiled bottom-topography dataset in the bay. The model can reproduce the observed CDW intrusion along the deep trough. The modeled SGT basal melting reaches a peak in summer and a minimum in autumn and winter, consistent with the wind-driven seasonality of the CDW thickness in the bay. The model results suggest the existence of an eastward-flowing undercurrent on the upper continental slope in summer, and the undercurrent contributes to the seasonal-to-interannual variability in the warm water intrusion into the bay. Furthermore, numerical experiments with and without fast-ice cover in the bay demonstrate that fast ice plays a role as an effective thermal insulator and reduces local sea ice formation, resulting in much warmer water intrusion into the SGT cavity.

Sign in / Sign up

Export Citation Format

Share Document