scholarly journals MIROC-ESM 2010: model description and basic results of CMIP5-20c3m experiments

2011 ◽  
Vol 4 (4) ◽  
pp. 845-872 ◽  
Author(s):  
S. Watanabe ◽  
T. Hajima ◽  
K. Sudo ◽  
T. Nagashima ◽  
T. Takemura ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Land Surface ◽  
Coupled Model ◽  
Model Description ◽  
Historical Simulation ◽  
Air Temperatures ◽  
Marine Biogeochemistry ◽  
Intercomparison Project ◽  
Transient Variations ◽  
Column Ozone

Abstract. An earth system model (MIROC-ESM 2010) is fully described in terms of each model component and their interactions. Results for the CMIP5 (Coupled Model Intercomparison Project phase 5) historical simulation are presented to demonstrate the model's performance from several perspectives: atmosphere, ocean, sea-ice, land-surface, ocean and terrestrial biogeochemistry, and atmospheric chemistry and aerosols. An atmospheric chemistry coupled version of MIROC-ESM (MIROC-ESM-CHEM 2010) reasonably reproduces transient variations in surface air temperatures for the period 1850–2005, as well as the present-day climatology for the zonal-mean zonal winds and temperatures from the surface to the mesosphere. The historical evolution and global distribution of column ozone and the amount of tropospheric aerosols are reasonably simulated in the model based on the Representative Concentration Pathways' (RCP) historical emissions of these precursors. The simulated distributions of the terrestrial and marine biogeochemistry parameters agree with recent observations, which is encouraging to use the model for future global change projections.

scholarly journals MIROC-ESM: model description and basic results of CMIP5-20c3m experiments

2011 ◽  
Vol 4 (2) ◽  
pp. 1063-1128 ◽  
Author(s):  
S. Watanabe ◽  
T. Hajima ◽  
K. Sudo ◽  
T. Nagashima ◽  
T. Takemura ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Land Surface ◽  
Coupled Model ◽  
Model Description ◽  
Historical Simulation ◽  
Air Temperatures ◽  
Marine Biogeochemistry ◽  
Intercomparison Project ◽  
Transient Variations ◽  
Column Ozone

Abstract. An earth system model (MIROC-ESM) is fully described in terms of each model component and their interactions. Results for the CMIP5 (Coupled Model Intercomparison Project phase 5) historical simulation are presented to demonstrate the model's performance from several perspectives: atmosphere, ocean, sea-ice, land-surface, ocean and terrestrial biogeochemistry, and atmospheric chemistry and aerosols. An atmospheric chemistry coupled version of MIROC-ESM (MIROC-ESM-CHEM) reasonably reproduces transient variations in surface air temperatures for the period 1850–2005, as well as the present-day climatology for the zonal-mean zonal winds and temperatures from the surface to the mesosphere. The historical evolution and global distribution of column ozone and the amount of tropospheric aerosols are reasonably simulated in the model based on the Representative Concentration Pathways' (RCP) historical emissions of these precursors. The simulated distributions of the terrestrial and marine biogeochemistry parameters agree with recent observations, which is encouraging to use the model for future global change projections.

scholarly journals Tropospheric ozone in CCMI models and Gaussian emulation to understand biases in the SOCOLv3 chemistry-climate model

2018 ◽  
Author(s):  
Laura E. Revell ◽  
Andrea Stenke ◽  
Fiona Tummon ◽  
Aryeh Feinberg ◽  
Eugene Rozanov ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Tropospheric Ozone ◽  
Climate Models ◽  
Climate Model ◽  
Coupled Model ◽  
Ozone Monitoring Instrument ◽  
Data Set ◽  
Gaussian Process Emulation ◽  
Intercomparison Project ◽  
Column Ozone

Abstract. Previous multi-model intercomparisons have shown that chemistry-climate models exhibit significant biases in tropospheric ozone compared with observations. We investigate annual-mean tropospheric column ozone in 15 models participating in the SPARC/IGAC (Stratosphere-troposphere Processes and their Role in Climate/International Global Atmospheric Chemistry) Chemistry-Climate Model Initiative (CCMI). These models exhibit a positive bias, on average, of up to 40–50 % in the Northern Hemisphere compared with observations derived from the Ozone Monitoring Instrument and Microwave Limb Sounder (OMI/MLS), and a negative bias of up to ~ 30 % in the Southern Hemisphere. SOCOLv3.0 (version 3 of the Solar-Climate Ozone Links CCM), which participated in CCMI, simulates global-mean tropospheric ozone columns of 40.2 DU – approximately 33 % larger than the CCMI multi-model mean. Here we introduce an updated version of SOCOLv3.0, SOCOLv3.1, which includes an improved treatment of ozone sink processes, and results in a reduction in the tropospheric column ozone bias of up to 8 DU, mostly due to the inclusion of N2O5 hydrolysis on tropospheric aerosols. As a result of these developments, tropospheric column ozone amounts simulated by SOCOLv3.1 are comparable with several other CCMI models. We apply Gaussian process emulation and sensitivity analysis to understand the remaining ozone bias in SOCOLv3.1. This shows that ozone precursors (nitrogen oxides (NOx, carbon monoxide, methane and other volatile organic compounds) are responsible for more than 90 % of the variance in tropospheric ozone. However, it may not be the emissions inventories themselves that result in the bias, but how the emissions are handled in SOCOLv3.1, and we discuss this in the wider context of the other CCMI models. Given that the emissions data set to be used for phase 6 of the Coupled Model Intercomparison Project includes approximately 20 % more NOx than the data set used for CCMI, further work is urgently needed to address the challenges of simulating sub-grid processes of importance to tropospheric ozone in the current generation of chemistry-climate models.

scholarly journals Tracking Improvement in Simulated Marine Biogeochemistry Between CMIP5 and CMIP6

2020 ◽  
Author(s):  
Roland Séférian ◽  
Sarah Berthet ◽  
Andrew Yool ◽  
Julien Palmiéri ◽  
Laurent Bopp ◽  
...  
Keyword(s):  
Coupled Model ◽  
Climate Feedback ◽  
Full Potential ◽  
Earth System ◽  
Current Generation ◽  
System Models ◽  
Biogeochemical Models ◽  
Marine Biogeochemistry ◽  
Intercomparison Project ◽  
Earth System Models

Abstract Purpose of Review The changes or updates in ocean biogeochemistry component have been mapped between CMIP5 and CMIP6 model versions, and an assessment made of how far these have led to improvements in the simulated mean state of marine biogeochemical models within the current generation of Earth system models (ESMs). Recent Findings The representation of marine biogeochemistry has progressed within the current generation of Earth system models. However, it remains difficult to identify which model updates are responsible for a given improvement. In addition, the full potential of marine biogeochemistry in terms of Earth system interactions and climate feedback remains poorly examined in the current generation of Earth system models. Summary Increasing availability of ocean biogeochemical data, as well as an improved understanding of the underlying processes, allows advances in the marine biogeochemical components of the current generation of ESMs. The present study scrutinizes the extent to which marine biogeochemistry components of ESMs have progressed between the 5th and the 6th phases of the Coupled Model Intercomparison Project (CMIP).

scholarly journals AerChemMIP: quantifying the effects of chemistry and aerosols in CMIP6

2017 ◽  
Vol 10 (2) ◽  
pp. 585-607 ◽  
Author(s):  
William J. Collins ◽  
Jean-François Lamarque ◽  
Michael Schulz ◽  
Olivier Boucher ◽  
Veronika Eyring ◽  
...  
Keyword(s):  
Air Quality ◽  
Atmospheric Chemistry ◽  
Radiative Forcing ◽  
Climate Models ◽  
Coupled Model ◽  
Climate Impacts ◽  
Atmospheric Composition ◽  
Historical Period ◽  
Model Intercomparison ◽  
Intercomparison Project

Abstract. The Aerosol Chemistry Model Intercomparison Project (AerChemMIP) is endorsed by the Coupled-Model Intercomparison Project 6 (CMIP6) and is designed to quantify the climate and air quality impacts of aerosols and chemically reactive gases. These are specifically near-term climate forcers (NTCFs: methane, tropospheric ozone and aerosols, and their precursors), nitrous oxide and ozone-depleting halocarbons. The aim of AerChemMIP is to answer four scientific questions. 1. How have anthropogenic emissions contributed to global radiative forcing and affected regional climate over the historical period? 2. How might future policies (on climate, air quality and land use) affect the abundances of NTCFs and their climate impacts? 3.How do uncertainties in historical NTCF emissions affect radiative forcing estimates? 4. How important are climate feedbacks to natural NTCF emissions, atmospheric composition, and radiative effects? These questions will be addressed through targeted simulations with CMIP6 climate models that include an interactive representation of tropospheric aerosols and atmospheric chemistry. These simulations build on the CMIP6 Diagnostic, Evaluation and Characterization of Klima (DECK) experiments, the CMIP6 historical simulations, and future projections performed elsewhere in CMIP6, allowing the contributions from aerosols and/or chemistry to be quantified. Specific diagnostics are requested as part of the CMIP6 data request to highlight the chemical composition of the atmosphere, to evaluate the performance of the models, and to understand differences in behaviour between them.

scholarly journals Datasets for the CMIP6 Scenario Model Intercomparison Project (ScenarioMIP) Simulations with the Coupled Model CAS FGOALS-f3-L

2020 ◽  
Author(s):  
Shuwen Zhao ◽  
Yongqiang Yu ◽  
Pengfei Lin ◽  
Hailong Liu ◽  
Bian He ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Heat Content ◽  
Coupled Model ◽  
Global Ocean ◽  
Model Intercomparison ◽  
Radiative Forcings ◽  
Air Temperatures ◽  
Tier 1 ◽  
Scenario Model ◽  
Intercomparison Project

AbstractThe datasets for the tier-1 Scenario Model Intercomparison Project (ScenarioMIP) experiments from the Chinese Academy of Sciences (CAS) Flexible Global Ocean-Atmosphere-Land System model, finite-volume version 3 (CAS FGOALS-f3-L) are described in this study. ScenarioMIP is one of the core MIP experiments in phase 6 of the Coupled Model Intercomparison Project (CMIP6). Considering future CO2, CH4, N2O and other gases’ concentrations, as well as land use, the design of ScenarioMIP involves eight pathways, including two tiers (tier-1 and tier-2) of priority. Tier-1 includes four combined Shared Socioeconomic Pathways (SSPs) with radiative forcing, i.e., SSP1-2.6, SSP2-4.5, SSP3-7.0 and SSP5-8.5, in which the globally averaged radiative forcing at the top of the atmosphere around the year 2100 is approximately 2.6, 4.5, 7.0 and 8.5 W m−2, respectively. This study provides an introduction to the ScenarioMIP datasets of this model, such as their storage location, sizes, variables, etc. Preliminary analysis indicates that surface air temperatures will increase by about 1.89°C, 3.07°C, 4.06°C and 5.17°C by around 2100 under these four scenarios, respectively. Meanwhile, some other key climate variables, such as sea-ice extension, precipitation, heat content, and sea level rise, also show significant long-term trends associated with the radiative forcing increases. These datasets will help us understand how the climate will change under different anthropogenic and radiative forcings.

scholarly journals Ozone sensitivity to varying greenhouse gases and ozone-depleting substances in CCMI simulations

2017 ◽  
Author(s):  
Olaf Morgenstern ◽  
Hideharu Akiyoshi ◽  
Yousuke Yamashita ◽  
Douglas E. Kinnison ◽  
Rolando R. Garcia ◽  
...  
Keyword(s):  
Greenhouse Gases ◽  
Climate Model ◽  
Phase 1 ◽  
Coupled Model ◽  
Total Column Ozone ◽  
Ozone Sensitivity ◽  
Intercomparison Project ◽  
Ozone Depleting Substances ◽  
Column Ozone ◽  
Total Column

Abstract. Ozone fields simulated for the Chemistry-Climate Model Initiative (CCMI) will be used as forcing data in the 6th Coupled Model Intercomparison Project (CMIP6). Here we assess, using reference and sensitivity simulations produced for phase 1 of CCMI, the suitability of CCMI-1 model results for this process, investigating the degree of consistency amongst models regarding their responses to variations in individual forcings. We consider the influences of methane, nitrous oxide, a combination of chlorinated or brominated ozone-depleting substances (ODSs), and a combination of carbon dioxide and other greenhouse gases (GHGs). We find varying degrees of consistency in the models' responses in ozone to these individual forcings, including some considerable disagreement. In particular, the response of total-column ozone to these forcings is less consistent across the multi-model ensemble than profile comparisons. The likely cause of this is lower-stratospheric transport and dynamical responses exhibiting substantial inter-model differences. The findings imply that the ozone fields derived from CCMI-1 are subject to considerable uncertainties regarding the impacts of these anthropogenic forcings.

scholarly journals Hydroclimatic variability and change in the Chesapeake Bay Watershed

2016 ◽  
Vol 8 (2) ◽  
pp. 254-273 ◽  
Author(s):  
Chounghyun Seong ◽  
Venkataramana Sridhar
Keyword(s):  
Chesapeake Bay ◽  
Land Surface ◽  
Daily Precipitation ◽  
Coupled Model ◽  
Baseline Period ◽  
Northern Region ◽  
Chesapeake Bay Watershed ◽  
Intercomparison Project ◽  
Hydroclimatic Variability ◽  
High Degree

The Chesapeake Bay (CB) Watershed is undergoing changes in climate, hydrology, and land use. The assessment of hydroclimatic impacts is important for both water quantity and quality management. This study evaluated the hydroclimatic changes using the Coupled Model Intercomparison Project 5 (CMIP5) data which provided statistically downscaled daily precipitation and temperature. An increase of 3.0 to 5.2 °C in temperature was projected between 2070 and 2099 when compared with the baseline period of 1970–1999. However, precipitation projections showed a modest increase with an average of 5.2 and 8.4% between 2070 and 2099. The northern part of the CB Watershed was expected to be wetter and warmer than the southern region. The average changes in flow were projected between −12 and 6% and −22 to 5% between 2070 and 2099, respectively, under two scenarios. Minimum changes in winter and highest flow reduction in fall with a high degree of variability among the ensemble members was expected. Greater decrease in flows in the northern region of the CB Watershed was projected. Despite the wetter future projections at the end of the century and uncertainties in our evapotranspiration (ET) estimation, reductions in the land surface runoff partly were attributed to increased ET.

scholarly journals Intermodel Variability and Mechanism Attribution of Central and Southeastern U.S. Anomalous Cooling in the Twentieth Century as Simulated by CMIP5 Models

2013 ◽  
Vol 26 (17) ◽  
pp. 6215-6237 ◽  
Author(s):  
Zaitao Pan ◽  
Xiaodong Liu ◽  
Sanjiv Kumar ◽  
Zhiqiu Gao ◽  
James Kinter
Keyword(s):  
United States ◽  
Twentieth Century ◽  
Land Surface ◽  
Regional Scale ◽  
Coupled Model ◽  
The United States ◽  
Cmip5 Models ◽  
Model Intercomparison ◽  
Central United States ◽  
Intercomparison Project

Abstract Some parts of the United States, especially the southeastern and central portion, cooled by up to 2°C during the twentieth century, while the global mean temperature rose by 0.6°C (0.76°C from 1901 to 2006). Studies have suggested that the Pacific decadal oscillation (PDO) and the Atlantic multidecadal oscillation (AMO) may be responsible for this cooling, termed the “warming hole” (WH), while other works reported that regional-scale processes such as the low-level jet and evapotranspiration contribute to the abnormity. In phase 3 of the Coupled Model Intercomparison Project (CMIP3), only a few of the 53 simulations could reproduce the cooling. This study analyzes newly available simulations in experiments from phase 5 of the Coupled Model Intercomparison Project (CMIP5) from 28 models, totaling 175 ensemble members. It was found that 1) only 19 out of 100 all-forcing historical ensemble members simulated negative temperature trend (cooling) over the southeast United States, with 99 members underpredicting the cooling rate in the region; 2) the missing of cooling in the models is likely due to the poor performance in simulating the spatial pattern of the cooling rather than the temporal variation, as indicated by a larger temporal correlation coefficient than spatial one between the observation and simulations; 3) the simulations with greenhouse gas (GHG) forcing only produced strong warming in the central United States that may have compensated the cooling; and 4) the all-forcing historical experiment compared with the natural-forcing-only experiment showed a well-defined WH in the central United States, suggesting that land surface processes, among others, could have contributed to the cooling in the twentieth century.

Showcasing the compact Earth system model OSCAR v3.1 with CMIP6 simulations

2021 ◽  
Author(s):  
Yann Quilcaille ◽  
Thomas Gasser
Keyword(s):  
Carbon Cycle ◽  
Atmospheric Chemistry ◽  
Coupled Model ◽  
Climate Feedback ◽  
Large Set ◽  
Earth System ◽  
Ocean Carbon Cycle ◽  
Intercomparison Project ◽  
Reduced Complexity ◽  
Ocean Carbon

<p>While Earth system models (ESM) provide spatially detailed process-based outputs, they present heavy computational costs. Reduced complexity models such as OSCAR are calibrated on those complex models and provide an alternative with faster calculations but lower resolutions. Yet, reduced-complexity models need to be evaluated and validated. We diagnose the newest version of OSCAR (v3.1) using observations and results from ESMs and the current Coupled Model Intercomparison Project 6. A total of 99 experiments are selected for simulation with OSCAR v3.1 in a probabilistic framework, reaching a total of 567,700,000 simulated years. Here, we showcase these results. A first highlight of this exercise is the unstability of the model for high-warming scenarios, which we attribute to the ocean carbon cycle module. The diverging runs caused by this unstability were discarded in the post-processing. The ensuing main results were further obtained by weighting each physical parametrizations based on their performance to replicate a set of observations. Overall, OSCAR v3.1 qualitively behaves like complex ESMs, for all aspects of the Earth system, although we observe a number of quantitative differences with state-of-the-art models. Some specific features of OSCAR contribute in these differences, such as its fully interactive atmospheric chemistry and endogenous calculations of biomass burning, wetlands and permafrost emissions. Nevertheless, the low sensitivity of the land carbon cycle to climate change, the unstability of the ocean carbon cycle, the seemingly over-constrained climate module, and the strong climate feedback over short-lived species, all call for an improvement of these aspects in OSCAR. Beyond providing a key diagnosis of the model in the context of the reduced-complexity models intercomparison project (RCMIP), this work is also meant to help with the upcoming calibration of OSCAR on CMIP6 results, and to provide a large set of CMIP6 simulations all run consistently with a probalistic model.</p>

scholarly journals JULES-GL7: The Global Land Configuration of the Joint UK Land Environment Simulation version 7.0

2019 ◽  
Author(s):  
Andrew J. Wiltshire ◽  
Carolina Duran Rojas ◽  
John Edwards ◽  
Nicola Gedney ◽  
Anna B. Harper ◽  
...  
Keyword(s):  
Land Surface ◽  
Coupled Model ◽  
Ancillary Data ◽  
Code Base ◽  
Global Land ◽  
Standard Configuration ◽  
Environment Simulation ◽  
Intercomparison Project ◽  
Land Surface Modelling ◽  
Parameter Values

Abstract. We present the latest global land configuration of the Joint UK Land Environment Simulator (JULES) model as used in the latest international coupled model intercomparison project (CMIP6). The configuration is defined by the combination of switches, parameter values and ancillary data, which we provide alongside a set of historical forcing data that defines the experimental setup. In addition, we provide a standardised modelling system that runs on the NERC JASMIN cluster accessible to all with links to JULES. This is provided so that users can test and evaluate their own science against the standard configuration to promote community engagement in the development of land surface modelling capability through JULES. It is intended that JULES configurations should be independent of the underlying code base and thus they will be available at the latest release of the JULES code. This means that different code releases will produce scientifically comparable results for a given configuration version. Versioning is therefore determined by the configuration as opposed to the underlying code base.

Sign in / Sign up

Export Citation Format

Share Document