Application of ultra‐precise GRACE Follow-On LRI measurements for validation of the state-of-the-art static gravity field models and examination of sub-monthly time-variable gravity signals

2020 ◽  
Author(s):  
Khosro Ghobadi Far ◽  
Shin-Chan Han ◽  
Jeanne Sauber ◽  
Richard Ray ◽  
Christopher M. McCullough ◽  
...  

<p>The test Laser ranging interferometer (LRI) on the GRACE Follow-On satellites provides complementary inter-satellite ranging measurements to the baseline K-band microwave ranging (KBR) system that can be used to examine standard, and create novel, GRACE-FO data products.  We first calculated the KBR and LRI inter-satellite ranging residuals using dynamic orbits computed from non-gravitational accelerations, a static gravity field model and other background geophysical models like ocean tides. To accurately quantify the improvement by LRI, we directly examined the inter-satellite ranging residuals in the time and frequency domains. The frequency-domain analysis reveals that LRI enhances the accuracy of gravity measurements by ~1 order of magnitude over 60-200 CPR (10-37 mHz) frequencies with the signal dominated by static gravity field of the Earth. The time-domain analysis shows that LRI is capable of detecting static gravity signals as small as a few 0.1 nm/s<sup>2</sup> in 100-200 CPR frequency band. We made use of such LRI data acquired in 2019 to validate the state-of-the-art gravity field models GGM05S, GGM05C, GOCE-TIM-R6e, EIGEN-6C4, ITSG-Grace2018s and GOCO06s. We found that LRI data can identify subtle un-/mis-modeled static gravity signals in these models in the spectral as well as spatial domains, and thus, suggest how the next generation of gravity field models could be improved. We also examined the high‐frequency (sub-monthly) variations of the Argentine Gyre using LRI measurements along with satellite altimetry data. Through comparison of measured gravity change by LRI with synthetic gravity change from altimetry sea surface data (evaluated at GRACE Follow-On altitude), we clearly demonstrate how the high-frequency Argentine Gyre signal is fully captured by instantaneous LRI measurements by individual data arcs, but not in the monthly mean Level-2 data. Such along-orbit analyses of LRI data could be employed for, among others, validation of high-frequency non-tidal ocean models used in GRACE and GRACE Follow-On de-aliasing products.</p> <p> </p>

2008 ◽  
Vol 392-394 ◽  
pp. 645-649
Author(s):  
Lin Zhu ◽  
De Ming Xiao

A kind of multi-sensor detection device was designed by using multi-sensor combined detection technology. The signal of axial force, torque and vibration in vertical and horizontal direction in deep hole drilling were collected respectively, and delivered to computer for processing by using data collection device. And then the feature parameters that can reflect the cutting tool wear were abstracted by means of the method of time-domain analysis and frequency-domain analysis. Finally, the state was classified by mode identification method and the judgment samples are also obtained.


Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3606
Author(s):  
Jing-Yuan Lin ◽  
Chuan-Ting Chen ◽  
Kuan-Hung Chen ◽  
Yi-Feng Lin

Three-phase wye–delta LLC topology is suitable for voltage step down and high output current, and has been used in the industry for some time, e.g., for server power and EV charger. However, no comprehensive circuit analysis has been performed for three-phase wye–delta LLC. This paper provides complete analysis methods for three-phase wye–delta LLC. The analysis methods include circuit operation, time domain analysis, frequency domain analysis, and state–plane analysis. Circuit operation helps determine the circuit composition and operation sequence. Time domain analysis helps understand the detail operation, equivalent circuit model, and circuit equation. Frequency domain analysis helps obtain the curve of the transfer function and assists in circuit design. State–plane analysis is used for optimal trajectory control (OTC). These analyses not only can calculate the voltage/current stress, but can also help design three-phase wye-delta connected LLC and provide the OTC control reference. In addition, this paper uses PSIM simulation to verify the correctness of analysis. At the end, a 5-kW three-phase wye–delta LLC prototype is realized. The specification of the prototype is a DC input voltage of 380 V and output voltage/current of 48 V/105 A. The peak efficiency is 96.57%.


Author(s):  
Rui Guo ◽  
Yiqin Wang ◽  
Haixia Yan ◽  
Fufeng Li ◽  
Jianjun Yan ◽  
...  

From the perspective of hemodynamics principles, the pressure pulse wave marked in the radial artery is the comprehensive result of pulse wave propagation and reflection in the arterial conduit. The most common pulse charts (also called pulse wave) obtained by Traditional Chinese Medicine (TCM) pulse-taking technique, if quantified and standardized, may become a universal and valuable diagnostic tool. The methods of feature extraction of TCM pulse charts currently involve time-domain analysis, frequency-domain analysis and time-frequency joint analysis. The feature parameters extracted by these methods have no definite clinical significance. Therefore, these feature parameters cannot essentially differentiate different types of TCM pulse. In this chapter, the harmonic analysis method was applied to analyze the common TCM pulse charts (plain pulse, wiry pulse, slippery pulse). Velocity and reflectivity coefficients of pulse were calculated. We found that wave velocities and reflection coefficients of different TCM pulse have different distributions. Furthermore, we studied the clinical significance of velocities and reflection coefficients. The result suggests that wave velocity and reflection coefficient are the feature parameters of TCM pulse with physiological and pathological significance, which can be used to interpret formation of Chinese medicine pulse. Our study reveals the mechanism of TCM pulse formation and promotes non-invasive TCM pulse diagnostic method.


Author(s):  
J Watton

The method of modal approximation to the distributed friction transmission line functions via frequency-domain analysis is briefly discussed. A specific form is then derived which allows time-domain analysis to be easily pursued using a digital simulation package approach. The method is applied to a highly non-linear servo-valve controlled motor system and a good comparison between experiment and theory is shown. A comparison is also made with previous work using the method of characteristics, and natural frequency predictions are also compared with some common lumped parameter approximations.


Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3737 ◽  
Author(s):  
Thanh Dam Pham ◽  
Hyunkyoung Shin

Floating offshore wind turbines promise to provide an abundant source of energy. Currently, much attention is being paid to the efficient performance and the economics of floating wind systems. This paper aims to develop a spar-type platform to support a 5-MW reference wind turbine at a water depth of 150 m. The spar-type platform includes a moonpool at the center. The design optimization process is composed of three steps; the first step uses a spreadsheet to calculate the platform dimensions; the second step is a frequency domain analysis of the responses in wave conditions; and the final step is a fully coupled simulation time domain analysis to obtain the dynamic responses in combined wind, wave, and current conditions. By having a water column inside the open moonpool, the system’s dynamic responses to horizontal and rotating motions are significantly reduced. Reduction of these motions leads to a reduction in the nacelle acceleration and tower base bending moment. On the basic of optimization processes, a spar-type platform combined with a moonpool is suggested, which has good performance in both operational conditions and extreme conditions.


Author(s):  
R. H. Yuck ◽  
S. J. Kim ◽  
S. U. Sung ◽  
H. J. Kim ◽  
D. Y. Lee ◽  
...  

SET (Samsung Enhanced hull for Tendon) TLP (Tension Leg Platform) has been designed as an innovative TLP hull form with optimized number of tendons compared to conventional TLP design. SHI (Samsung Heavy Industries) designed the SET TLP to have the minimized hull weight with narrow and thin pontoon which results in the less number of tendons without any outboard extension of column or pontoon. The SET TLP has 8 tendons which are evenly attached along with the octagonal shaped-ring pontoon. The unique shape of octagonal ring pontoon distributes the wave load and concentrated tendon loads in larger areas, which can minimize the structural reinforcement. To verify the feasibility of the proposed hull concept with regard to the hydrostatic/hydrodynamic characteristics and tendon design, the numerical analyses for the hydrostatic stability and global performance are carried out. Hydrostatic stability is investigated for all the possible loading cases such as float-off, wet transit, tendon installation and operational conditions, and the proper tank compartments are achieved for all the scenarios without using any temporary stability module. The global performance is validated for all the possible combinations of wave, swell, wind, current and/or squall for a site in Western Africa. Through the frequency-domain analysis and nonlinear time-domain analysis as well, the essential items such as the maximum offset/set-down/top tendon tension, minimum bottom tendon tension are examined and confirms that the certain design criteria of TLP operation are satisfied.


1994 ◽  
Vol 116 (4) ◽  
pp. 781-786 ◽  
Author(s):  
C. J. Goh

The convergence of learning control is traditionally analyzed in the time domain. This is because a finite planning horizon is often assumed and the analysis in time domain can be extended to time-varying and nonlinear systems. For linear time-invariant (LTI) systems with infinite planning horizon, however, we show that simple frequency domain techniques can be used to quickly derive several interesting results not amenable to time-domain analysis, such as predicting the rate of convergence or the design of optimum learning control law. We explain a paradox arising from applying the finite time convergence criterion to the infinite time learning control problem, and propose the use of current error feedback for controlling possibly unstable systems.


2020 ◽  
Author(s):  
Xinyu Xu ◽  
Ziyu Shen ◽  
Wenbin Shen ◽  
Yongqi Zhao

<p><span>Recovering the gravity field with the satellite’s frequency signal might be an alternative measuring mode in the future when the accuracy of the onboard clock was good enough. On the one hand, we analyze the performance of recovering gravity field model from the gravitational potentials with different accuracies on different satellite altitudes (from 200 km to 350 km) based on semi-analytical (SA) method. On the other hand, we analyze the performance based on the numerical analysis. First, the gravitational potentials along the satellite orbit are computed from the clock observations based on the method of satellite’s frequency signal with the accuracies of 10<sup>-16</sup> and 10<sup>-18</sup>s. Then, based on the derived gravitational potentials, we recovered the gravity field models up to degree and order 200 (corresponding to 100 km spatial resolution). At last, the errors of recovered models are validated by comparing with the reference model.</span></p>


Sign in / Sign up

Export Citation Format

Share Document