scholarly journals AUTOMATED RECONSTRUCTION OF HISTORIC ROOF STRUCTURES FROM POINT CLOUDS – DEVELOPMENT AND EXAMPLES

2017 ◽  
Vol IV-2/W2 ◽  
pp. 195-202 ◽  
Author(s):  
M. Pöchtrager ◽  
G. Styhler-Aydın ◽  
M. Döring-Williams ◽  
N. Pfeifer
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Structural Model ◽  
Point Clouds ◽  
Automated Analysis ◽  
Structural Elements ◽  
Large Scale Structures ◽  
Scan Data ◽  
Short Time ◽  
High Degree

The analysis of historic roof constructions is an important task for planning the adaptive reuse of buildings or for maintenance and restoration issues. Current approaches to modeling roof constructions consist of several consecutive operations that need to be done manually or using semi-automatic routines. To increase efficiency and allow the focus to be on analysis rather than on data processing, a set of methods was developed for the fully automated analysis of the roof constructions, including integration of architectural and structural modeling. Terrestrial laser scanning permits high-detail surveying of large-scale structures within a short time. Whereas 3-D laser scan data consist of millions of single points on the object surface, we need a geometric description of structural elements in order to obtain a structural model consisting of beam axis and connections. Preliminary results showed that the developed methods work well for beams in flawless condition with a quadratic cross section and no bending. Deformations or damages such as cracks and cuts on the wooden beams can lead to incomplete representations in the model. Overall, a high degree of automation was achieved.

scholarly journals Historic Timber Roof Structure Reconstruction through Automated Analysis of Point Clouds

2022 ◽  
Vol 8 (1) ◽  
pp. 10
Author(s):  
Taşkın Özkan ◽  
Norbert Pfeifer ◽  
Gudrun Styhler-Aydın ◽  
Georg Hochreiner ◽  
Ulrike Herbig ◽  
...  
Keyword(s):  
Laser Scanning ◽  
3D Model ◽  
Region Growing ◽  
Point Clouds ◽  
Automated Analysis ◽  
Structural Elements ◽  
Roof Structure ◽  
Main Target ◽  
Side Face ◽  
Region Growing Segmentation

We present a set of methods to improve the automation of the parametric 3D modeling of historic roof structures using terrestrial laser scanning (TLS) point clouds. The final product of the TLS point clouds consist of 3D representation of all objects, which were visible during the scanning, including structural elements, wooden walking ways and rails, roof cover and the ground; thus, a new method was applied to detect and exclude the roof cover points. On the interior roof points, a region-growing segmentation-based beam side face searching approach was extended with an additional method that splits complex segments into linear sub-segments. The presented workflow was conducted on an entire historic roof structure. The main target is to increase the automation of the modeling in the context of completeness. The number of manually counted beams served as reference to define a completeness ratio for results of automatically modeling beams. The analysis shows that this approach could increase the quantitative completeness of the full automatically generated 3D model of the roof structure from 29% to 63%.

scholarly journals Automated Visual Recognizability Evaluation of Traffic Sign Based on 3D LiDAR Point Clouds

2019 ◽  
Vol 11 (12) ◽  
pp. 1453 ◽  
Author(s):  
Shanxin Zhang ◽  
Cheng Wang ◽  
Lili Lin ◽  
Chenglu Wen ◽  
Chenhui Yang ◽  
...  
Keyword(s):  
Traffic Safety ◽  
Laser Scanning ◽  
Large Scale ◽  
Evaluation Method ◽  
Evaluation Model ◽  
Point Clouds ◽  
Traffic Sign ◽  
Traffic Signs ◽  
3D Point Clouds ◽  
Traffic Environment

Maintaining the high visual recognizability of traffic signs for traffic safety is a key matter for road network management. Mobile Laser Scanning (MLS) systems provide efficient way of 3D measurement over large-scale traffic environment. This paper presents a quantitative visual recognizability evaluation method for traffic signs in large-scale traffic environment based on traffic recognition theory and MLS 3D point clouds. We first propose the Visibility Evaluation Model (VEM) to quantitatively describe the visibility of traffic sign from any given viewpoint, then we proposed the concept of visual recognizability field and Traffic Sign Visual Recognizability Evaluation Model (TSVREM) to measure the visual recognizability of a traffic sign. Finally, we present an automatic TSVREM calculation algorithm for MLS 3D point clouds. Experimental results on real MLS 3D point clouds show that the proposed method is feasible and efficient.

scholarly journals ANALYSIS OF 3D BUILDING MODELS ACCURACY BASED ON THE AIRBORNE LASER SCANNING POINT CLOUDS

2018 ◽  
Vol XLII-2 ◽  
pp. 797-804 ◽  
Author(s):  
W. Ostrowski ◽  
M. Pilarska ◽  
J. Charyton ◽  
K. Bakuła
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
3D Models ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Statistical Parameters ◽  
Airborne Laser ◽  
Building Models

Creating 3D building models in large scale is becoming more popular and finds many applications. Nowadays, a wide term “3D building models” can be applied to several types of products: well-known CityGML solid models (available on few Levels of Detail), which are mainly generated from Airborne Laser Scanning (ALS) data, as well as 3D mesh models that can be created from both nadir and oblique aerial images. City authorities and national mapping agencies are interested in obtaining the 3D building models. Apart from the completeness of the models, the accuracy aspect is also important. Final accuracy of a building model depends on various factors (accuracy of the source data, complexity of the roof shapes, etc.). In this paper the methodology of inspection of dataset containing 3D models is presented. The proposed approach check all building in dataset with comparison to ALS point clouds testing both: accuracy and level of details. Using analysis of statistical parameters for normal heights for reference point cloud and tested planes and segmentation of point cloud provides the tool that can indicate which building and which roof plane in do not fulfill requirement of model accuracy and detail correctness. Proposed method was tested on two datasets: solid and mesh model.

scholarly journals Weighing trees with lasers: advances, challenges and opportunities

2018 ◽  
Vol 8 (2) ◽  
pp. 20170048 ◽  
Author(s):  
M. I. Disney ◽  
M. Boni Vicari ◽  
A. Burt ◽  
K. Calders ◽  
S. L. Lewis ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Three Dimensional ◽  
Point Clouds ◽  
3D Models ◽  
Tree Form ◽  
Form And Function ◽  
Challenges And Opportunities ◽  
And Function ◽  
Non Destructive

Terrestrial laser scanning (TLS) is providing exciting new ways to quantify tree and forest structure, particularly above-ground biomass (AGB). We show how TLS can address some of the key uncertainties and limitations of current approaches to estimating AGB based on empirical allometric scaling equations (ASEs) that underpin all large-scale estimates of AGB. TLS provides extremely detailed non-destructive measurements of tree form independent of tree size and shape. We show examples of three-dimensional (3D) TLS measurements from various tropical and temperate forests and describe how the resulting TLS point clouds can be used to produce quantitative 3D models of branch and trunk size, shape and distribution. These models can drastically improve estimates of AGB, provide new, improved large-scale ASEs, and deliver insights into a range of fundamental tree properties related to structure. Large quantities of detailed measurements of individual 3D tree structure also have the potential to open new and exciting avenues of research in areas where difficulties of measurement have until now prevented statistical approaches to detecting and understanding underlying patterns of scaling, form and function. We discuss these opportunities and some of the challenges that remain to be overcome to enable wider adoption of TLS methods.

scholarly journals TLS and SfM Approach for Bulk Density Determination of Excavated Heterogeneous Raw Materials

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 174 ◽  
Author(s):  
Peter Blistan ◽  
Stanislav Jacko ◽  
Ľudovít Kovanič ◽  
Julián Kondela ◽  
Katarína Pukanská ◽  
...  
Keyword(s):  
Bulk Density ◽  
Laser Scanning ◽  
Large Scale ◽  
Raw Materials ◽  
Terrestrial Laser Scanning ◽  
Mineral Resources ◽  
Point Clouds ◽  
Raw Material

A frequently recurring problem in the extraction of mineral resources (especially heterogeneous mineral resources) is the rapid operative determination of the extracted quantity of raw material in a surface quarry. This paper deals with testing and analyzing the possibility of using unconventional methods such as digital close-range photogrammetry and terrestrial laser scanning in the process of determining the bulk density of raw material under in situ conditions. A model example of a heterogeneous deposit is the perlite deposit Lehôtka pod Brehmi (Slovakia). Classical laboratory methods for determining bulk density were used to verify the results of the in situ method of bulk density determination. Two large-scale samples (probes) with an approximate volume of 7 m3 and 9 m3 were realized in situ. 6 point samples (LITH) were taken for laboratory determination. By terrestrial laser scanning (TLS) measurement from 2 scanning stations, point clouds with approximately 163,000/143,000 points were obtained for each probe. For Structure-from-Motion (SfM) photogrammetry, 49/55 images were acquired for both probes, with final point clouds containing approximately 155,000/141,000 points. Subsequently, the bulk densities of the bulk samples were determined by the calculation from in situ measurements by TLS and SfM photogrammetry. Comparison of results of the field in situ measurements (1841 kg∙m−3) and laboratory measurements (1756 kg∙m−3) showed only a 4.5% difference in results between the two methods for determining the density of heterogeneous raw materials, confirming the accuracy of the used in situ methods. For the determination of the loosening coefficient, the material from both large-scale samples was transferred on a horizontal surface. Their volumes were determined by TLS. The loosening coefficient for the raw material of 1.38 was calculated from the resulting values.

scholarly journals DEM Extraction from ALS Point Clouds in Forest Areas via Graph Convolution Network

2020 ◽  
Vol 12 (1) ◽  
pp. 178 ◽  
Author(s):  
Jinming Zhang ◽  
Xiangyun Hu ◽  
Hengming Dai ◽  
ShenRun Qu
Keyword(s):  
Deep Learning ◽  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Spatial Relationship ◽  
Point Clouds ◽  
Current Data ◽  
Data Sampling ◽  
Dynamic Graph ◽  
Convolution Model

It is difficult to extract a digital elevation model (DEM) from an airborne laser scanning (ALS) point cloud in a forest area because of the irregular and uneven distribution of ground and vegetation points. Machine learning, especially deep learning methods, has shown powerful feature extraction in accomplishing point cloud classification. However, most of the existing deep learning frameworks, such as PointNet, dynamic graph convolutional neural network (DGCNN), and SparseConvNet, cannot consider the particularity of ALS point clouds. For large-scene laser point clouds, the current data preprocessing methods are mostly based on random sampling, which is not suitable for DEM extraction tasks. In this study, we propose a novel data sampling algorithm for the data preparation of patch-based training and classification named T-Sampling. T-Sampling uses the set of the lowest points in a certain area as basic points with other points added to supplement it, which can guarantee the integrity of the terrain in the sampling area. In the learning part, we propose a new convolution model based on terrain named Tin-EdgeConv that fully considers the spatial relationship between ground and non-ground points when constructing a directed graph. We design a new network based on Tin-EdgeConv to extract local features and use PointNet architecture to extract global context information. Finally, we combine this information effectively with a designed attention fusion module. These aspects are important in achieving high classification accuracy. We evaluate the proposed method by using large-scale data from forest areas. Results show that our method is more accurate than existing algorithms.

scholarly journals A VOXEL-BASED METADATA STRUCTURE FOR CHANGE DETECTION IN POINT CLOUDS OF LARGE-SCALE URBAN AREAS

2018 ◽  
Vol IV-2 ◽  
pp. 97-104
Author(s):  
J. Gehrung ◽  
M. Hebel ◽  
M. Arens ◽  
U. Stilla
Keyword(s):  
Change Detection ◽  
Urban Areas ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Urban Environments ◽  
Detection Methods ◽  
Planar Surfaces ◽  
Occupancy Grids ◽  
Speed Up

Mobile laser scanning has not only the potential to create detailed representations of urban environments, but also to determine changes up to a very detailed level. An environment representation for change detection in large scale urban environments based on point clouds has drawbacks in terms of memory scalability. Volumes, however, are a promising building block for memory efficient change detection methods. The challenge of working with 3D occupancy grids is that the usual raycasting-based methods applied for their generation lead to artifacts caused by the traversal of unfavorable discretized space. These artifacts have the potential to distort the state of voxels in close proximity to planar structures. In this work we propose a raycasting approach that utilizes knowledge about planar surfaces to completely prevent this kind of artifacts. To demonstrate the capabilities of our approach, a method for the iterative volumetric approximation of point clouds that allows to speed up the raycasting by 36 percent is proposed.

scholarly journals Can 3D Point Clouds Replace GCPs?

2014 ◽  
Vol II-5 ◽  
pp. 347-354 ◽  
Author(s):  
G. Stavropoulou ◽  
G. Tzovla ◽  
A. Georgopoulos
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Field Work ◽  
Surface Model ◽  
Control Points ◽  
3D Point Clouds ◽  
Surface Models

Over the past decade, large-scale photogrammetric products have been extensively used for the geometric documentation of cultural heritage monuments, as they combine metric information with the qualities of an image document. Additionally, the rising technology of terrestrial laser scanning has enabled the easier and faster production of accurate digital surface models (DSM), which have in turn contributed to the documentation of heavily textured monuments. However, due to the required accuracy of control points, the photogrammetric methods are always applied in combination with surveying measurements and hence are dependent on them. Along this line of thought, this paper explores the possibility of limiting the surveying measurements and the field work necessary for the production of large-scale photogrammetric products and proposes an alternative method on the basis of which the necessary control points instead of being measured with surveying procedures are chosen from a dense and accurate point cloud. Using this point cloud also as a surface model, the only field work necessary is the scanning of the object and image acquisition, which need not be subject to strict planning. To evaluate the proposed method an algorithm and the complementary interface were produced that allow the parallel manipulation of 3D point clouds and images and through which single image procedures take place. The paper concludes by presenting the results of a case study in the ancient temple of Hephaestus in Athens and by providing a set of guidelines for implementing effectively the method.

scholarly journals Structural 3D Reconstruction of Indoor Space for 5G Signal Simulation with Mobile Laser Scanning Point Clouds

2019 ◽  
Vol 11 (19) ◽  
pp. 2262 ◽  
Author(s):  
Cui ◽  
Li ◽  
Dong
Keyword(s):  
Indoor Environment ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Graph Cuts ◽  
3D Models ◽  
Base Station ◽  
Label Graph ◽  
Semantic Constraints ◽  
Signal Simulation

3D modelling of indoor environment is essential in smart city applications such as building information modelling (BIM), spatial location application, energy consumption estimation, and signal simulation, etc. Fast and stable reconstruction of 3D models from point clouds has already attracted considerable research interest. However, in the complex indoor environment, automated reconstruction of detailed 3D models still remains a serious challenge. To address these issues, this paper presents a novel method that couples linear structures with three-dimensional geometric surfaces to automatically reconstruct 3D models using point cloud data from mobile laser scanning. In our proposed approach, a fully automatic room segmentation is performed on the unstructured point clouds via multi-label graph cuts with semantic constraints, which can overcome the over-segmentation in the long corridor. Then, the horizontal slices of point clouds with individual room are projected onto the plane to form a binary image, which is followed by line extraction and regularization to generate floorplan lines. The 3D structured models are reconstructed by multi-label graph cuts, which is designed to combine segmented room, line and surface elements as semantic constraints. Finally, this paper proposed a novel application that 5G signal simulation based on the output structural model to aim at determining the optimal location of 5G small base station in a large-scale indoor scene for the future. Four datasets collected using handheld and backpack laser scanning systems in different locations were used to evaluate the proposed method. The results indicate our proposed methodology provides an accurate and efficient reconstruction of detailed structured models from complex indoor scenes.

scholarly journals Transparent Collision Visualization of Point Clouds Acquired by Laser Scanning

2019 ◽  
Vol 8 (9) ◽  
pp. 425
Author(s):  
Weite Li ◽  
Kenya Shigeta ◽  
Kyoko Hasegawa ◽  
Liang Li ◽  
Keiji Yano ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Three Dimensional ◽  
Point Clouds ◽  
City Government ◽  
Three Dimensional Objects ◽  
Kyoto City ◽  
Risk Areas ◽  
Scale Point ◽  
The City

In this paper, we propose a method to visualize large-scale colliding point clouds by highlighting their collision areas, and apply the method to visualization of collision simulation. Our method uses our recent work that achieved precise three-dimensional see-through imaging, i.e., transparent visualization, of large-scale point clouds that were acquired via laser scanning of three-dimensional objects. We apply the proposed collision visualization method to two applications: (1) The revival of the festival float procession of the Gion Festival, Kyoto city, Japan. The city government plans to revive the original procession route, which is narrow and not used at present. For the revival, it is important to know whether the festival floats would collide with houses, billboards, electric wires, or other objects along the original route. (2) Plant simulations based on laser-scanned datasets of existing and new facilities. The advantageous features of our method are the following: (1) A transparent visualization with a correct depth feel that is helpful to robustly determine the collision areas; (2) the ability to visualize high collision risk areas and real collision areas; and (3) the ability to highlight target visualized areas by increasing the corresponding point densities.

Sign in / Sign up

Export Citation Format

Share Document