scholarly journals Three-dimensional imaging of hold baggage for airport security

2014 ◽  
Vol XL-5 ◽  
pp. 331-336
Author(s):  
S. Kolokytha ◽  
R. Speller ◽  
S. Robson
Keyword(s):  
3D Imaging ◽  
Imaging System ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
Handling Time ◽  
Cost Effective ◽  
Airport Security ◽  
X Ray ◽  
Common System ◽  
Close Range

This study describes a cost-effective check-in baggage screening system, based on "on-belt tomosynthesis" (ObT) and close-range photogrammetry, that is designed to address the limitations of the most common system used, conventional projection radiography. The latter's limitations can lead to loss of information and an increase in baggage handling time, as baggage is manually searched or screened with more advanced systems. This project proposes a system that overcomes such limitations creating a cost-effective automated pseudo-3D imaging system, by combining x-ray and optical imaging to form digital tomograms. Tomographic reconstruction requires a knowledge of the change in geometry between multiple x-ray views of a common object. This is uniquely achieved using a close range photogrammetric system based on a small network of web-cameras. This paper presents the recent developments of the ObT system and describes recent findings of the photogrammetric system implementation. Based on these positive results, future work on the advancement of the ObT system as a cost-effective pseudo-3D imaging of hold baggage for airport security is proposed.

scholarly journals Three-dimensional phase-contrast X-ray microtomography with scanning–imaging X-ray microscope optics

2013 ◽  
Vol 20 (5) ◽  
pp. 793-800 ◽  
Author(s):  
Akihisa Takeuchi ◽  
Kentaro Uesugi ◽  
Yoshio Suzuki
Keyword(s):  
Phase Contrast ◽  
3D Imaging ◽  
Imaging System ◽  
Three Dimensional ◽  
Image Data ◽  
Pixel Detector ◽  
Scanning Microscope ◽  
X Ray ◽  
Scanning Imaging ◽  
Focused Beam

A three-dimensional (3D) X-ray tomographic micro-imaging system has been developed. The optical system is based on a scanning–imaging X-ray microscope (SIXM) optics, which is a hybrid system consisting of a scanning microscope optics with a one-dimensional (1D) focusing (line-focusing) device and an imaging microscope optics with a 1D objective. In the SIXM system, each 1D dataset of a two-dimensional (2D) image is recorded independently. An object is illuminated with a line-focused beam. Positional information of the region illuminated by the line-focused beam is recorded with the 1D imaging microscope optics as line-profile data. By scanning the object with the line focus, 2D image data are obtained. In the same manner as for a scanning microscope optics with a multi-pixel detector, imaging modes such as phase contrast and absorption contrast can be arbitrarily configured after the image data acquisition. By combining a tomographic scan method and the SIXM system, quantitative 3D imaging is performed. Results of a feasibility study of the SIXM for 3D imaging are shown.

Design and calibration of an IVEM for general 3-dimensional imaging of non-diffracting materials

1992 ◽  
Vol 50 (2) ◽  
pp. 1040-1041
Author(s):  
Neil Rowlands ◽  
Jeff Price ◽  
Michael Kersker ◽  
Seichi Suzuki ◽  
Steve Young ◽  
...  
Keyword(s):  
3D Imaging ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3 Dimensional ◽  
3D Microstructure ◽  
Image Translation ◽  
Digital Correlation ◽  
On Line ◽  
Mechanical Stage ◽  
Projection Angle

Three-dimensional (3D) microstructure visualization on the electron microscope requires that the sample be tilted to different positions to collect a series of projections. This tilting should be performed rapidly for on-line stereo viewing and precisely for off-line tomographic reconstruction. Usually a projection series is collected using mechanical stage tilt alone. The stereo pairs must be viewed off-line and the 60 to 120 tomographic projections must be aligned with fiduciary markers or digital correlation methods. The delay in viewing stereo pairs and the alignment problems in tomographic reconstruction could be eliminated or improved by tilting the beam if such tilt could be accomplished without image translation.A microscope capable of beam tilt with simultaneous image shift to eliminate tilt-induced translation has been investigated for 3D imaging of thick (1 μm) biologic specimens. By tilting the beam above and through the specimen and bringing it back below the specimen, a brightfield image with a projection angle corresponding to the beam tilt angle can be recorded (Fig. 1a).

Analyzing the Impact of X-Ray Tomography on the Reliability of Integrated Circuits

2015 ◽  
Author(s):  
Halit Dogan ◽  
Md Mahbub Alam ◽  
Navid Asadizanjani ◽  
Sina Shahbazmohamadi ◽  
Domenic Forte ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
3D Imaging ◽  
Three Dimensional ◽  
Serial Sectioning ◽  
Promising Technique ◽  
Flash Memories ◽  
X Ray ◽  
3D Information ◽  
The Impact

Abstract X-ray tomography is a promising technique that can provide micron level, internal structure, and three dimensional (3D) information of an integrated circuit (IC) component without the need for serial sectioning or decapsulation. This is especially useful for counterfeit IC detection as demonstrated by recent work. Although the components remain physically intact during tomography, the effect of radiation on the electrical functionality is not yet fully investigated. In this paper we analyze the impact of X-ray tomography on the reliability of ICs with different fabrication technologies. We perform a 3D imaging using an advanced X-ray machine on Intel flash memories, Macronix flash memories, Xilinx Spartan 3 and Spartan 6 FPGAs. Electrical functionalities are then tested in a systematic procedure after each round of tomography to estimate the impact of X-ray on Flash erase time, read margin, and program operation, and the frequencies of ring oscillators in the FPGAs. A major finding is that erase times for flash memories of older technology are significantly degraded when exposed to tomography, eventually resulting in failure. However, the flash and Xilinx FPGAs of newer technologies seem less sensitive to tomography, as only minor degradations are observed. Further, we did not identify permanent failures for any chips in the time needed to perform tomography for counterfeit detection (approximately 2 hours).

scholarly journals Prediction of Android and Gynoid Body Adiposity via a Three-dimensional Stereovision Body Imaging System and Dual-Energy X-ray Absorptiometry

2015 ◽  
Vol 34 (5) ◽  
pp. 367-377 ◽  
Author(s):  
Jane J. Lee ◽  
Jeanne H. Freeland-Graves ◽  
M. Reese Pepper ◽  
Philip R. Stanforth ◽  
Bugao Xu
Keyword(s):  
Imaging System ◽  
Three Dimensional ◽  
Dual Energy ◽  
Body Imaging ◽  
X Ray ◽  
Body Adiposity

Recent Development of Cone-Beam X-Ray Microtomography at Sunyab

1997 ◽  
Vol 3 (S2) ◽  
pp. 1125-1126
Author(s):  
S.J. Pan ◽  
A. Shih ◽  
W.S. Liou ◽  
M.S. Park ◽  
G. Wang ◽  
...  
Keyword(s):  
Dynamic Range ◽  
Imaging System ◽  
Tomographic Reconstruction ◽  
Ccd Camera ◽  
Test Sample ◽  
Glass Beads ◽  
Cone Beam ◽  
Projection Data ◽  
X Ray ◽  
Cooled Ccd

An experimental X-ray cone-beam microtomographic imaging system utilizing a generalized Feldkamp reconstruction algorithm has been developed in our laboratory. This microtomographic imaging system consists of a conventional dental X-ray source (Aztech 65, Boulder, CO), a sample position and rotation stage, an X-ray scintillation phosphor screen, and a high resolution slow scan cooled CCD camera (Kodak KAF 1400). A generalized Feldkamp cone-beam algorithm was used to perform tomographic reconstruction from cone-beam projection data. This algorithm was developed for various hardware configuration to perform reconstruction of spherical, rod-shaped and plate-like specimen.A test sample consists of 8 glass beads (approx. 800μm in diameter) dispersed in an epoxy-filled #0 gelatin capsule. One hundred X-ray projection images were captured equal angularly (at 3.6 degree spacing) by the cooled CCD camera at a of 1317×967 (17×17mm2) pixels with 12-bit dynamic range. Figure 1 shows a 3D isosurface rendering of the test sample. The eight glass beads and trapped air bubbles (arrows) in the epoxy resin (e) are clearly visible.

scholarly journals Development of an X-ray real-time stereo imaging technique using synchrotron radiation

2011 ◽  
Vol 18 (4) ◽  
pp. 569-574 ◽  
Author(s):  
Masato Hoshino ◽  
Kentaro Uesugi ◽  
James Pearson ◽  
Takashi Sonobe ◽  
Mikiyasu Shirai ◽  
...  
Keyword(s):  
Synchrotron Radiation ◽  
Real Time ◽  
Imaging System ◽  
Silicon Crystal ◽  
Three Dimensional ◽  
Stereo Image ◽  
Large Field ◽  
Depth Information ◽  
Stereo Imaging ◽  
X Ray

An X-ray stereo imaging system with synchrotron radiation was developed at BL20B2, SPring-8. A portion of a wide X-ray beam was Bragg-reflected by a silicon crystal to produce an X-ray beam which intersects with the direct X-ray beam. Samples were placed at the intersection point of the two beam paths. X-ray stereo images were recorded simultaneously by a detector with a large field of view placed close to the sample. A three-dimensional wire-frame model of a sample was created from the depth information that was obtained from the lateral positions in the stereo image. X-ray stereo angiography of a mouse femoral region was performed as a demonstration of real-time stereo imaging. Three-dimensional arrangements of the femur and blood vessels were obtained.

scholarly journals A Cost-Effective System for Aerial 3D Thermography of Buildings

2020 ◽  
Vol 6 (8) ◽  
pp. 76
Author(s):  
Claudia Daffara ◽  
Riccardo Muradore ◽  
Nicola Piccinelli ◽  
Nicola Gaburro ◽  
Tullio de Rubeis ◽  
...  
Keyword(s):  
3D Imaging ◽  
Three Dimensional ◽  
Cost Effective ◽  
Complex Structures ◽  
Non Destructive Testing ◽  
Ir Thermography ◽  
Destructive Testing ◽  
Effective System ◽  
Reconstruction Software ◽  
Non Destructive

Three-dimensional (3D) imaging and infrared (IR) thermography are powerful tools in many areas in engineering and sciences. Their joint use is of great interest in the buildings sector, allowing inspection and non-destructive testing of elements as well as an evaluation of the energy efficiency. When dealing with large and complex structures, as buildings (particularly historical) generally are, 3D thermography inspection is enhanced by Unmanned Aerial Vehicles (UAV—also known as drones). The aim of this paper is to propose a simple and cost-effective system for aerial 3D thermography of buildings. Special attention is thus payed to instrument and reconstruction software choice. After a very brief introduction to IR thermography for buildings and 3D thermography, the system is described. Some experimental results are given to validate the proposal.

scholarly journals Tomosaic: efficient acquisition and reconstruction of teravoxel tomography data using limited-size synchrotron X-ray beams

2018 ◽  
Vol 25 (5) ◽  
pp. 1478-1489 ◽  
Author(s):  
Rafael Vescovi ◽  
Ming Du ◽  
Vincent de Andrade ◽  
William Scullin ◽  
Dogˇa Gürsoy ◽  
...  
Keyword(s):  
Imaging System ◽  
Three Dimensional ◽  
Computing System ◽  
X Rays ◽  
X Ray ◽  
High Penetration ◽  
X Ray Imaging ◽  
Software Modules ◽  
Dimensional Reconstruction ◽  
Tomography Data

X-rays offer high penetration with the potential for tomography of centimetre-sized specimens, but synchrotron beamlines often provide illumination that is only millimetres wide. Here an approach is demonstrated termed Tomosaic for tomographic imaging of large samples that extend beyond the illumination field of view of an X-ray imaging system. This includes software modules for image stitching and calibration, while making use of existing modules available in other packages for alignment and reconstruction. The approach is compatible with conventional beamline hardware, while providing a dose-efficient method of data acquisition. By using parallelization on a distributed computing system, it provides a solution for handling teravoxel-sized or larger datasets that cannot be processed on a single workstation in a reasonable time. Using experimental data, the package is shown to provide good quality three-dimensional reconstruction for centimetre-sized samples with sub-micrometre pixel size.

Sign in / Sign up

Export Citation Format

Share Document