scholarly journals The new CNES-CLS18 Global Mean Dynamic Topography

2021 ◽  
Author(s):  
Sandrine Mulet ◽  
Marie-Hélène Rio ◽  
Hélène Etienne ◽  
Camilia Artana ◽  
Mathilde Cancet ◽  
...  
Keyword(s):  
Current Model ◽  
Altimeter Data ◽  
Dynamic Topography ◽  
Geoid Model ◽  
Mean Dynamic Topography ◽  
Drifting Buoy ◽  
Grace Data ◽  
The Mean ◽  
Global Mean

Abstract. The Mean Dynamic Topography (MDT) is a key reference surface for altimetry. It is needed for the calculation of the ocean absolute dynamic topography, and under the geostrophic approximation, the estimation of surface currents. CNES-CLS Mean Dynamic Topography (MDT) solutions are calculated by merging information from altimeter data, GRACE and GOCE gravity field and oceanographic in-situ measurements (drifting buoy velocities, hydrological profiles). The objective of this paper is to present the newly updated CNES-CLS18 MDT. The main improvement compared to the previous CNES-CLS13 solution is the use of updated input datasets: the GOCO05S geoid model is used based on the complete GOCE mission (November 2009–October 2013) and 10.5 years of GRACE data, together with all drifting buoy velocities (SVP-type and Argo floats) and hydrological profiles (CORA database) available from 1993–2017 (instead of 1993–2012). The new solution also benefits from improved data processing – in particular a new wind-driven current model has been developed to extract the geostrophic component from the buoy velocities; and methodology – in particular the computation of the medium scale GOCE-based MDT first guess and the correlation scales used for the multivariate mapping have been revised. An evaluation of the new solution compared to the previous version and to other existing MDT show significant improvements both in strong currents and coastal areas.

scholarly journals The new CNES-CLS18 global mean dynamic topography

Ocean Science ◽  
2021 ◽  
Vol 17 (3) ◽  
pp. 789-808
Author(s):  
Sandrine Mulet ◽  
Marie-Hélène Rio ◽  
Hélène Etienne ◽  
Camilia Artana ◽  
Mathilde Cancet ◽  
...  
Keyword(s):  
Current Model ◽  
Altimeter Data ◽  
Dynamic Topography ◽  
Geoid Model ◽  
Mean Dynamic Topography ◽  
Drifting Buoy ◽  
Grace Data ◽  
The Mean ◽  
Global Mean

Abstract. The mean dynamic topography (MDT) is a key reference surface for altimetry. It is needed for the calculation of the ocean absolute dynamic topography, and under the geostrophic approximation, the estimation of surface currents. CNES-CLS mean dynamic topography (MDT) solutions are calculated by merging information from altimeter data, GRACE, and GOCE gravity field and oceanographic in situ measurements (drifting buoy velocities, hydrological profiles). The objective of this paper is to present the newly updated CNES-CLS18 MDT. The main improvement compared to the previous CNES-CLS13 solution is the use of updated input datasets: the GOCO05S geoid model is used based on the complete GOCE mission (November 2009–October 2013) and 10.5 years of GRACE data, together with all drifting buoy velocities (SVP-type and Argo floats) and hydrological profiles (CORA database) available from 1993 to 2017 (instead of 1993–2012). The new solution also benefits from improved data processing (in particular a new wind-driven current model has been developed to extract the geostrophic component from the buoy velocities) and methodology (in particular the computation of the medium-scale GOCE-based MDT first guess has been revised). An evaluation of the new solution compared to the previous version and to other existing MDT solutions show significant improvements in both strong currents and coastal areas.

scholarly journals Impact of Multiple Altimeter Data and Mean Dynamic Topography in a Global Analysis and Forecasting System

2019 ◽  
Vol 36 (7) ◽  
pp. 1255-1266 ◽  
Author(s):  
Mathieu Hamon ◽  
Eric Greiner ◽  
Pierre-Yves Le Traon ◽  
Elisabeth Remy
Keyword(s):  
Data Assimilation ◽  
Sea Surface ◽  
Global Ocean ◽  
Altimeter Data ◽  
Dynamic Topography ◽  
Mean Dynamic Topography ◽  
Ocean Data Assimilation ◽  
The Mean ◽  
Data Assimilation System ◽  
Assimilation System

AbstractSatellite altimetry is one of the main sources of information used to constrain global ocean analysis and forecasting systems. In addition to in situ vertical temperature and salinity profiles and sea surface temperature (SST) data, sea level anomalies (SLA) from multiple altimeters are assimilated through the knowledge of a surface reference, the mean dynamic topography (MDT). The quality of analyses and forecasts mainly depends on the availability of SLA observations and on the accuracy of the MDT. A series of observing system evaluations (OSEs) were conducted to assess the relative importance of the number of assimilated altimeters and the accuracy of the MDT in a Mercator Ocean global 1/4° ocean data assimilation system. Dedicated tools were used to quantify impacts on analyzed and forecast sea surface height and temperature/salinity in deeper layers. The study shows that a constellation of four altimeters associated with a precise MDT is required to adequately describe and predict upper-ocean circulation in a global 1/4° ocean data assimilation system. Compared to a one-altimeter configuration, a four-altimeter configuration reduces the mean forecast error by about 30%, but the reduction can reach more than 80% in western boundary current (WBC) regions. The use of the most recent MDT updates improves the accuracy of analyses and forecasts to the same extent as assimilating a fourth altimeter.

scholarly journals Impacts of mean dynamic topography on a regional ocean assimilation system

Ocean Science ◽  
2015 ◽  
Vol 11 (5) ◽  
pp. 829-837 ◽  
Author(s):  
C. Yan ◽  
J. Zhu ◽  
C. A. S. Tanajura
Keyword(s):  
Data Assimilation ◽  
Sea Surface Height ◽  
Sea Surface ◽  
Dynamic Topography ◽  
Altimetry Data ◽  
Mean Dynamic Topography ◽  
Mean Sea Surface ◽  
The Mean

Abstract. An ocean data assimilation system was developed for the Pacific–Indian oceans with the aim of assimilating altimetry data, sea surface temperature, and in situ measurements from Argo (Array for Real-time Geostrophic Oceanography), XBT (expendable bathythermographs), CTD (conductivity temperature depth), and TAO (Tropical Atmosphere Ocean). The altimetry data assimilation requires the addition of the mean dynamic topography to the altimetric sea level anomaly to match the model sea surface height. The mean dynamic topography is usually computed from the model long-term mean sea surface height, and is also available from gravimetric satellite data. In this study, the impact of different mean dynamic topographies on the sea level anomaly assimilation is examined. Results show that impacts of the mean dynamic topography cannot be neglected. The mean dynamic topography from the model long-term mean sea surface height without assimilating in situ observations results in worsened subsurface temperature and salinity estimates. Even if all available observations including in situ measurements, sea surface temperature measurements, and altimetry data are assimilated, the estimates are still not improved. This proves the significant impact of the MDT (mean dynamic topography) on the analysis system, as the other types of observations do not compensate for the shortcoming due to the altimetry data assimilation. The gravimeter-based mean dynamic topography results in a good estimate compared with that of the experiment without assimilation. The mean dynamic topography computed from the model long-term mean sea surface height after assimilating in situ observations presents better results.

scholarly journals Application of the BEM approach for a determination of the regional marine geoid model and the mean dynamic topography in the Southwest Pacific Ocean and Tasman Sea

2012 ◽  
Vol 2 (1) ◽  
pp. 8-14 ◽  
Author(s):  
R. Tenzer ◽  
R. Čunderlík ◽  
N. Dayoub ◽  
A. Abdalla
Keyword(s):  
Pacific Ocean ◽  
Dynamic Topography ◽  
Geoid Model ◽  
Mean Dynamic Topography ◽  
Southwest Pacific ◽  
Tasman Sea ◽  
Marine Gravity ◽  
The Mean ◽  
Local Vertical Datum

Application of the BEM approach for a determination of the regional marine geoid model and the mean dynamic topography in the Southwest Pacific Ocean and Tasman SeaWe apply a novel approach for the gravimetric marine geoid modelling which utilise the boundary element method (BEM). The direct BEM formulation for the Laplace equation is applied to obtain a numerical solution to the linearised fixed gravimetric boundary-value problem in points at the Earth's surface. The numerical scheme uses the collocation method with linear basis functions. It involves a discretisation of the Earth's surface which is considered as a fixed boundary. The surface gravity disturbances represent the oblique derivative boundary condition. The BEM approach is applied to determine the marine geoid model over the study area of the Southwest Pacific Ocean and Tasman Sea using DNSC08 marine gravity data. The comparison of the BEM-derived and EGM2008 geoid models reveals that the geoid height differences vary within -25 and 18 cm with the standard deviation of 6 cm. The DNSC08 sea surface topography data and the new marine geoid are then used for modelling of the mean dynamic topography (MDT) over the study area. The local vertical datum (LVD) offsets estimated at 15 tide-gauge stations in New Zealand are finally used for testing the coastal MDT. The average value of differences between the MDT and LVD offsets is 1 cm.

scholarly journals Impacts of mean dynamic topography on a regional ocean assimilation system

2015 ◽  
Vol 12 (3) ◽  
pp. 1083-1105
Author(s):  
C. Yan ◽  
J. Zhu ◽  
C. A. S. Tanajura
Keyword(s):  
Sea Surface Height ◽  
Sea Surface ◽  
Dynamic Topography ◽  
Altimetry Data ◽  
Mean Dynamic Topography ◽  
Mean Sea Surface ◽  
In Situ Observations ◽  
The Mean

Abstract. An ocean assimilation system was developed for the Pacific-Indian oceans with the aim of assimilating altimetry data, sea surface temperature, and in-situ measurements from ARGO, XBT, CTD, and TAO. The altimetry data assimilation requires the addition of the mean dynamic topography to the altimetric sea level anomaly to match the model sea surface height. The mean dynamic topography is usually computed from the model long-term mean sea surface height, and is also available from gravimeteric satellite data. In this study, different mean dynamic topographies are used to examine their impacts on the sea level anomaly assimilation. Results show that impacts of the mean dynamic topography cannot be neglected. The mean dynamic topography from the model long-term mean sea surface height without assimilating in-situ observations results in worsened subsurface temperature and salinity estimates. The gravimeter-based mean dynamic topography results in an even worse estimate. Even if all available observations including in-situ measurements, sea surface temperature measurements, and altimetry data are assimilated, the estimates are still not improved. This further indicates that the other types of observations do not compensate for the shortcoming due to the altimetry data assimilation. The mean dynamic topography computed from the model's long-term mean sea surface height after assimilating in-situ observations presents better results.

scholarly journals Integration of HF Radar Observations for an Enhanced Coastal Mean Dynamic Topography

2020 ◽  
Vol 7 ◽  
Author(s):  
Ainhoa Caballero ◽  
Sandrine Mulet ◽  
Nadia Ayoub ◽  
Ivan Manso-Narvarte ◽  
Xabier Davila ◽  
...  
Keyword(s):  
High Resolution ◽  
Sea Level ◽  
Satellite Data ◽  
Coastal Areas ◽  
Hf Radar ◽  
Global Ocean ◽  
Dynamic Topography ◽  
Mean Dynamic Topography ◽  
Radar Measurements

Satellite altimeters provide continuous information of the sea level variability and mesoscale processes for the global ocean. For estimating the sea level above the geoid and monitoring the full ocean dynamics from altimeters measurements, a key reference surface is needed: The Mean Dynamic Topography (MDT). However, in coastal areas, where, in situ measurements are sparse and the typical scales of the motion are generally smaller than in the deep ocean, the global MDT solutions are less accurate than in the open ocean, even if significant improvement has been done in the past years. An opportunity to fill in this gap has arisen with the growing availability of long time-series of high-resolution HF radar surface velocity measurements in some areas, such as the south-eastern Bay of Biscay. The prerequisite for the computation of a coastal MDT, using the newly available data of surface velocities, was to obtain a robust methodology to remove the ageostrophic signal from the HF radar measurements, in coherence with the scales resolved by the altimetry. To that end, we first filtered out the tidal and inertial motions, and then, we developed and tested a method that removed the Ekman component and the remaining divergent part of the flow. A regional high-resolution hindcast simulation was used to assess the method. Then, the processed HF radar geostrophic velocities were used in synergy with additional in situ data, altimetry, and gravimetry to compute a new coastal MDT, which shows significant improvement compared with the global MDT. This study showcases the benefit of combining satellite data with continuous, high-frequency, and synoptic in situ velocity data from coastal radar measurements; taking advantage of the different scales resolved by each of the measuring systems. The integrated analysis of in situ observations, satellite data, and numerical simulations has provided a further step in the understanding of the local ocean processes, and the new MDT a basis for more reliable monitoring of the study area. Recommendations for the replicability of the methodology in other coastal areas are also provided. Finally, the methods developed in this study and the more accurate regional MDT could benefit present and future high-resolution altimetric missions.

scholarly journals Towards worldwide height system unification using ocean information

2012 ◽  
Vol 2 (4) ◽  
pp. 302-318 ◽  
Author(s):  
P.L. Woodworth ◽  
C.W. Hughes ◽  
R.J. Bingham ◽  
T. Gruber
Keyword(s):  
North Atlantic ◽  
Pacific Coast ◽  
Data Sets ◽  
Dynamic Topography ◽  
Model Accuracy ◽  
Geoid Model ◽  
Height System ◽  
The Mean ◽  
Height System Unification

AbstractWe describe the application of ocean levelling to worldwide height system unification. The study involves a comparison of ‘geodetic’ and ‘ocean’ approaches to determination of the mean dynamic topography (MDT) at the coast, from which confidence in the accuracy of stateof- the-art ocean and geoid models can be obtained. We conclude that models are consistent at the sub-decimetre level for the regions that we have studied (North Atlantic coastlines and islands, North American Pacific coast and Mediterranean). That level of consistency provides an estimate of the accuracy of using the ocean models to provide an MDT correction to the national datums of countries with coastlines, and thereby of achieving unification. It also provides a validation of geoid model accuracy for application to height system unification in general. We show how our methods can be applied worldwide, as long as the necessary data sets are available, and explain why such an extension of the present study is necessary if worldwide height system unification is to be realised.

scholarly journals Mean Dynamic Topography of the Ocean Derived from Satellite and Drifting Buoy Data Using Three Different Techniques*

2009 ◽  
Vol 26 (9) ◽  
pp. 1910-1919 ◽  
Author(s):  
Nikolai Maximenko ◽  
Peter Niiler ◽  
Luca Centurioni ◽  
Marie-Helene Rio ◽  
Oleg Melnichenko ◽  
...  
Keyword(s):  
Ocean Surface ◽  
Horizontal Resolution ◽  
Global Ocean ◽  
Momentum Balance ◽  
Small Scale ◽  
Western Boundary ◽  
Dynamic Topography ◽  
Geoid Model ◽  
Near Surface ◽  
Mean Dynamic Topography

Abstract Presented here are three mean dynamic topography maps derived with different methodologies. The first method combines sea level observed by the high-accuracy satellite radar altimetry with the geoid model of the Gravity Recovery and Climate Experiment (GRACE), which has recently measured the earth’s gravity with unprecedented spatial resolution and accuracy. The second one synthesizes near-surface velocities from a network of ocean drifters, hydrographic profiles, and ocean winds sorted according to the horizontal scales. In the third method, these global datasets are used in the context of the ocean surface momentum balance. The second and third methods are used to improve accuracy of the dynamic topography on fine space scales poorly resolved in the first method. When they are used to compute a multiyear time-mean global ocean surface circulation on a 0.5° horizontal resolution, both contain very similar, new small-scale midocean current patterns. In particular, extensions of western boundary currents appear narrow and strong despite temporal variability and exhibit persistent meanders and multiple branching. Also, the locations of the velocity concentrations in the Antarctic Circumpolar Current become well defined. Ageostrophic velocities reveal convergent zones in each subtropical basin. These maps present a new context in which to view the continued ocean monitoring with in situ instruments and satellites.

Sign in / Sign up

Export Citation Format

Share Document