High Resolution X-Ray Diffraction to Characterize Semiconductor Materials

Physicae ◽  
2000 ◽  
Vol 1 (1) ◽  
Author(s):  
Marcelo Hayashi
Keyword(s):  
High Resolution ◽  
Semiconductor Materials ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals X-ray topography of subsurface crystal layers

2017 ◽  
Vol 50 (3) ◽  
pp. 727-733 ◽  
Author(s):  
Zbigniew Swiatek ◽  
Igor Fodchuk ◽  
Ruslan Zaplitnyy
Keyword(s):  
High Resolution ◽  
Structural Changes ◽  
Structural Distortion ◽  
Semiconductor Materials ◽  
X Ray Diffraction ◽  
Surface Processing ◽  
X Ray ◽  
Extinction Depth

New capabilities of the Berg–Barrett topographic method are demonstrated using a skew-asymmetric X-ray diffraction scheme for investigating structural changes near the surface of semiconductor materials. Specifying the X-ray extinction depth, the details of defects and strains are revealed with high resolution. Consequently, analysis of structural distortion of layers near the surface after various types of surface processing becomes more complete.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

Tubulin structure at intermediate resolution

1995 ◽  
Vol 53 ◽  
pp. 852-853
Author(s):  
K. H. Downing ◽  
S. G. Wolf ◽  
E. Nogales
Keyword(s):  
High Resolution ◽  
Structural Data ◽  
Therapeutic Drug ◽  
Zinc Ions ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Negative Stain ◽  
Functional Mechanisms ◽  
Tubulin Structure

Microtubules are involved in a host of critical cell activities, many of which involve transport of organelles through the cell. Different sets of microtubules appear to form during the cell cycle for different functions. Knowledge of the structure of tubulin will be necessary in order to understand the various functional mechanisms of microtubule assemble, disassembly, and interaction with other molecules, but tubulin has so far resisted crystallization for x-ray diffraction studies. Fortuitously, in the presence of zinc ions, tubulin also forms two-dimensional, crystalline sheets that are ideally suited for study by electron microscopy. We have refined procedures for forming the sheets and preparing them for EM, and have been able to obtain high-resolution structural data that sheds light on the formation and stabilization of microtubules, and even the interaction with a therapeutic drug.Tubulin sheets had been extensively studied in negative stain, demonstrating that the same protofilament structure was formed in the sheets and microtubules. For high resolution studies, we have found that the sheets embedded in either glucose or tannin diffract to around 3 Å.

scholarly journals Photoconductivity of the Single Crystals Pb4Ga4GeS12 and Pb4Ga4GeSe12

Proceedings ◽  
2020 ◽  
Vol 62 (1) ◽  
pp. 4
Author(s):  
Hadj Bellagra ◽  
Oksana Nyhmatullina ◽  
Yuri Kogut ◽  
Halyna Myronchuk ◽  
Lyudmyla Piskach
Keyword(s):  
Ternary Systems ◽  
Semiconductor Materials ◽  
Tetragonal Symmetry ◽  
Bandgap Energy ◽  
Experimental Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vertical Bridgman ◽  
Symmetry Space ◽  
Symmetry Space Group

Quaternary semiconductor materials of the Pb4Ga4GeS(Se)12 composition have attracted the attention of researchers due to their possible use as active elements of optoelectronics and nonlinear optics. The Pb4Ga4GeS(Se)12 phases belong to the solid solution ranges of the Pb3Ga2GeS(Se)8 compounds which form in the quasi-ternary systems PbS(Se)−Ga2S(Se)3−GeS(Se)2 at the cross of the PbGa2S(Se)4−Pb2GeS(Se)4 and PbS(Se)−PbGa2GeS(Se)6 sections. The quaternary sulfide melts congruently at 943 K. The crystallization of the Pb4Ga4GeSe12 phase is associated with the ternary peritectic process Lp + PbSe ↔ PbGa2S4 + Pb3Ga2GeSe8 at 868 K. For the single crystal studies, Pb4Ga4GeS(Se)12 were pre-synthesized by co-melting high-purity elements. The X-ray diffraction results confirm that these compounds possess non-centrosymmetric crystal structure (tetragonal symmetry, space group P–421c). The crystals were grown by the vertical Bridgman method in a two-zone furnace. The starting composition was stoichiometric for Pb4Ga4GeS12, and the solution-melt method was used for the selenide Pb4Ga4GeSe12. The obtained value of the bandgap energy for the Pb4Ga4GeS12 and Pb4Ga4GeSe12 crystals is 1.86 and 2.28 eV, respectively. Experimental measurements of the spectral distribution of photoconductivity for the Pb4Ga4GeS12 and Pb4Ga4GeSe12 crystals exhibit the presence of two spectral maxima. The first lies in the region of 570 (2.17 eV) and 680 nm (1.82 eV), respectively, and matches the optical bandgap estimates well. The locations of the admixture maxima at about 1030 (1.20 eV) and 1340 nm (0.92 eV), respectively, agree satisfactorily with the calculated energy positions of the defects vs. and VSe.

scholarly journals Dislocation Arrangement in a Thick LEO GaN Film on Sapphire

2000 ◽  
Vol 5 (S1) ◽  
pp. 97-103
Author(s):  
Kathleen A. Dunn ◽  
Susan E. Babcock ◽  
Donald S. Stone ◽  
Richard J. Matyi ◽  
Ling Zhang ◽  
...  
Keyword(s):  
High Resolution ◽  
Electron Diffraction ◽  
Threading Dislocations ◽  
X Ray Diffraction ◽  
Burgers Vector ◽  
X Ray ◽  
The Third ◽  
Dislocation Arrangement ◽  
Image Position ◽  
Gan Film

Diffraction-contrast TEM, focused probe electron diffraction, and high-resolution X-ray diffraction were used to characterize the dislocation arrangements in a 16µm thick coalesced GaN film grown by MOVPE LEO. As is commonly observed, the threading dislocations that are duplicated from the template above the window bend toward (0001). At the coalescence plane they bend back to lie along [0001] and thread to the surface. In addition, three other sets of dislocations were observed. The first set consists of a wall of parallel dislocations lying in the coalescence plane and nearly parallel to the substrate, with Burgers vector (b) in the (0001) plane. The second set is comprised of rectangular loops with b = 1/3 [110] (perpendicular to the coalescence boundary) which originate in the coalescence boundary and extend laterally into the film on the (100). The third set of dislocations threads laterally through the film along the [100] bar axis with 1/3<110>-type Burgers vectors These sets result in a dislocation density of ∼109 cm−2. High resolution X-ray reciprocal space maps indicate wing tilt of ∼0.5º.

Investigation of Residual Strains of the Second Kind in Plastically Deformed Metallic Materials

1994 ◽  
Vol 376 ◽  
Author(s):  
M. Vrána ◽  
P. Klimanek ◽  
T. Kschidock ◽  
P. Lukáš ◽  
P. Mikula
Keyword(s):  
High Resolution ◽  
Neutron Diffraction ◽  
Stacking Faults ◽  
Metallic Materials ◽  
Line Broadening ◽  
X Ray Diffraction ◽  
X Ray ◽  
Neutron Diffractometer ◽  
Residual Strains ◽  
Good Agreement

ABSTRACTInvestigation of strongly distorted crystal structures caused by dislocations, stacking-faults etc. in both plastically deformed f.c.c. and b.c.c. metallic materials was performed by the analysis of the neutron diffraction line broadening. Measurements were realized by means of the high resolution triple-axis neutron diffractometer equipped by bent Si perfect crystals as monochromator and analyzer at the NPI Řež. The substructure parameters obtained in this manner are in good agreement with the results of X-ray diffraction analysis.

scholarly journals Hydrogen atoms in protein structures: high-resolution X-ray diffraction structure of the DFPase

2013 ◽  
Vol 6 (1) ◽  
pp. 308 ◽  
Author(s):  
Mikael Elias ◽  
Dorothee Liebschner ◽  
Jurgen Koepke ◽  
Claude Lecomte ◽  
Benoit Guillot ◽  
...  
Keyword(s):  
High Resolution ◽  
Protein Structures ◽  
X Ray Diffraction ◽  
Hydrogen Atoms ◽  
X Ray ◽  
Diffraction Structure

Study on Phases and Thermoelectric Properties of Bulk Fe4Sb12 and Fe3CoSb12 Prepared by Milling and Sintering

2011 ◽  
Vol 121-126 ◽  
pp. 1526-1529
Author(s):  
Ke Gao Liu ◽  
Jing Li
Keyword(s):  
Thermoelectric Properties ◽  
Impurity Phase ◽  
Semiconductor Materials ◽  
Thermal Constant ◽  
X Ray Diffraction ◽  
X Ray ◽  
Seebeck Coefficients ◽  
Maximum Value ◽  
Type Semiconductor ◽  
P Type

Bulk Fe4Sb12 and Fe3CoSb12 were prepared by sintering at 600 °C. The phases of samples were analyzed by X-ray diffraction and their thermoelectric properties were tested by electric constant instrument and laser thermal constant instrument. Experimental results show that, the major phases of bulk samples are skutterudite with impurity phase FeSb2. The electric resistivities of the samples increase with temperature rising at 100~500 °C. The bulk samples are P-type semiconductor materials. The Seebeck coefficients of the bulk Fe4Sb12 are higher than those of bulk Fe3CoSb12 samples at 100~200 °C but lower at 300~500 °C. The power factor of the bulk Fe4Sb12 samples decreases with temperature rising while that of bulk Fe3CoSb12 samples increases with temperature rising at 100~500 °C. The thermal conductivities of the bulk Fe4Sb12 samples are relatively higher than those of and Fe3CoSb12, which maximum value is up to 0.0974 Wm-1K-1. The ZT value of bulk Fe3CoSb12 increases with temperature rising at 100~500 °C, the maximum value is up to 0.031.The ZT values of the bulk Fe4Sb12 samples are higher than those of bulk Fe3CoSb12 at 100~300 °C while lower at 400~500 °C.

Sign in / Sign up

Export Citation Format

Share Document