Characterization of Silica Xerogels Surfaces by Inverse Gas Chromatography (IGC)

2000 ◽  
Vol 73 (4) ◽  
pp. 634-646 ◽  
Author(s):  
J. B. Donnet ◽  
T. K. Wang ◽  
Y. J. Li ◽  
H. Balard ◽  
G. T. Burns
Keyword(s):  
Gas Chromatography ◽  
Surface Energy ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Inverse Gas Chromatography ◽  
Residual Water ◽  
Silica Xerogels ◽  
Finite Concentration

Abstract Silylated silica xerogels, with controlled specific surface area and porosity, were prepared by a two-step procedure. In the first step, hydrogels were treated “in-situ” with hexamethyldisiloxane (HMDS) in the presence of 2-propanol and acid. In the second step, the hydrophobic gel was transferred into an organic solvent, the residual water removed by azeotropic distillation and the dried xerogel isolated by evaporating the solvent. Using this procedure, structure collapse of the hydrogels was minimized and it was possible to make xerogels with controlled specific surface area and porosity by varying the aging conditions of the hydrogels. The surface properties of both the untreated and the “in-situ” treated silica xerogels were examined by inverse gas chromatography (IGC) at either infinite dilution conditions (IGC-ID) or finite concentration conditions (IGC-FD). The former method was used to monitor the thermodynamic parameters of adsorption of molecular probes in interaction with the sites having the highest energies, while the latter method was used to provide information about the surface energy heterogeneity of the whole surface. The results for the xerogels are also compared to those obtained on untreated and silylated fumed silicas. After silylation, a systematical surface energy decrease has been observed at both ID and FD conditions of IGC for the two types of silica. However, the modified xerogels with higher surface coverage than silylated fumed silica show some different behaviors.

In-situ controlled synthesis of NiFe MOF materials with excellent electrocatalytic performances for water splitting

2021 ◽  
Vol 14 (02) ◽  
pp. 2151011
Author(s):  
Jingwen Jia ◽  
Longfu Wei ◽  
Ziting Guo ◽  
Fang Li ◽  
Changlin Yu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Water Splitting ◽  
Specific Surface Area ◽  
High Performance ◽  
Alkaline Condition ◽  
High Porosity ◽  
Large Specific Surface Area ◽  
Electrocatalytic Performance

Metal–organic frameworks (MOFs) are the electrocatalytic materials with large specific surface area, high porosity, controllable structure and monodisperse active center, which is a promising candidate for the application of electrochemical energy conversion. However, the electrocatalytic performance of pure MOFs is seriously limited its poor conductivity and stability. In this work, high-performance electrocatalyst was fabricated through combining NiFe/MOF on nickel foam (NF) via in-situ growth strategy. Through rational control of the time and ratio in reaction precursors, we realized the effective manipulation of the growth behavior, and further investigated the electrocatalytic performance in water splitting. The catalyst presented excellent electrocatalytic performance for water splitting, with low overpotential of 260 mV in alkaline condition at a current density of 50 mA[Formula: see text], which is benefited from the large specific surface area and active sites. This study demonstrates that the rational design of NiFe MOF/NF plays a significant role in high-performance electrocatalyst.

Fabrication of an N-doped mesoporous bio-carbon electrocatalyst efficient in Zn–air batteries by an in situ gas-foaming strategy

2019 ◽  
Vol 55 (100) ◽  
pp. 15117-15120 ◽  
Author(s):  
Hong Wang ◽  
Wei Li ◽  
Zhiwei Zhu ◽  
Yijuan Wang ◽  
Pan Li ◽  
...  
Keyword(s):  
Specific Surface ◽  
Porous Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Electrocatalytic Activity ◽  
High Specific Surface Area ◽  
Carbon Catalyst ◽  
Gas Foaming

An N-doped bio-carbon catalyst with a hierarchical interconnected macro/meso-porous structure and high specific surface area exhibited significantly enhanced electrocatalytic activity.

CO2 utilization by dry reforming of CH4 over mesoporous Ni/KIT-6 catalyst

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Congming Tang ◽  
Juan Huang ◽  
Dong Zhang ◽  
Qingqing Jiang ◽  
Guilin Zhou
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Photoelectron Spectroscopy ◽  
Pore Diameter ◽  
Co2 Utilization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Catalytic Performances

Abstract The mesoporous Ni/KIT-6 catalysts with different composition were prepared by altering reduction temperatures. In addition, their physicochemical properties were characterized by X-ray diffraction, in-situ X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller techniques. The results shown that the specific surface area, composition and metallic Ni crystallinity of the Ni/KIT-6 catalyst were significantly affected by reduction temperatures. The catalytic performances of the prepared Ni/KIT-6 catalysts were evaluated via the CO2 reforming of CH4 into syngas and followed the order: RT0 < RT250 < RT300 < RT350 < RT400 < RT450 ≈ RT500. The specific surface area, pore volume, pore diameter, and Ni0 content of the most representative RT450 catalyst among of them were 646.7 m2 g−1, 0.92 cm3 g−1, 6.5 nm, and 30.9%, respectively. The CH4 and CO2 conversions of RT450 catalyst reached to 69.0 and 39.4% under a reaction temperature of 600 °C, respectively. The CO selectivity was greater than 49% and the RT450 catalyst had good stability.

Advances in Preparation and Application of Supported Nano-Silver Composites

2019 ◽  
Vol 11 (11) ◽  
pp. 1477-1488
Author(s):  
Yonghang Xu ◽  
Fangya Zhou ◽  
Tao Zhang ◽  
Limiao Lin ◽  
Jingshu Wu ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Catalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Research Progress ◽  
Nano Silver ◽  
Silver Composites ◽  
Preparation Techniques

Supported nano-silver composites, famous for large specific surface area, good dispersibility and high catalytic activity, have been widely used in chemistry and chemical engineering, biomedicine and new materials. In this paper, we report recent research progress on supported nano-silver composites as reviewed from preparation techniques (chemical reduction, physical reduction and in-situ formation), types of supporters (organic and inorganic) and anti-microbial/catalytic activity. Firstly, the principles and merits/demerits of three preparation techniques for silver nanoparticles are elaborated. Afterwards, preparation, structures and properties of supported nano-silver composites are summarized through different types of supporters, as well as their applications in catalytic reaction, pollutant control and antimicrobial. Furthermore, it has been demonstrated that silver nanoparticles produced by in-situ formation are more stable and well-distributed, readily meeting the demands for practical applications. Finally, superior supporters for nano-silver composites should be of high specific surface area and good stability, non-expensive, environmentally friendly and low-toxicity.

Sign in / Sign up

Export Citation Format

Share Document