scholarly journals Experimental determination of continuous cooling transformation diagram for high strength steel X153CrMoV12

2021 ◽  
Vol 16 (1) ◽  
pp. 19-24
Author(s):  
Michal Krbaťa ◽  
◽  
Róbert Cíger ◽  
Keyword(s):  
Experimental Data ◽  
Heat Treatment ◽  
High Strength Steel ◽  
Microstructural Analysis ◽  
High Strength ◽  
Cooling Curves ◽  
Treatment Mode ◽  
Heat Treatment Mode ◽  
Continuous Cooling Transformation Diagram

The article is a continuation of the article ,DILATOMETRIC ANALYSIS OF COOLING CURVES FOR HIGH STRENGTH STEEL X153CrMoV12”, which deals with the phase transformations of tool steel X153CrMoV12. The experimental data obtained was used to evaluate the resulting CCT diagram, which consists of seven dilation curves. All experimental samples from dilatometric analyses were then subjected to microstructural analysis and hardness measurements to characterize the microstructure and hardness for each heat treatment mode tested. AFM microscopy was also used to study the carbides present in steels and their size and shape for all selected cooling modes.

Dilatometric analysis tool steel X153CrMoV12

2021 ◽  
Vol 16 (1) ◽  
pp. 14-18
Author(s):  
Michal Krbaťa ◽  
◽  
Róbert Cíger ◽  
Keyword(s):  
Experimental Data ◽  
Phase Transformations ◽  
Tool Steel ◽  
High Strength ◽  
Cooling Curve ◽  
Analysis Tool ◽  
Heat Treatment Regime ◽  
Temperature Ranges ◽  
Continuous Cooling Transformation Diagram

The article deals with phase transformations and austenitizing behavior of the X155CrMoV12 tool steel. Dilatation analyses of a series of samples were performed at various cooling rates, chosen in the range from 10 °C·s-1 to 0.1 °C·s-1. Acquired experimental data were used for evaluation of dilatometric curves in order to map the temperature ranges of phase transformations of the austenite to pearlite, bainite or martensite. All experimental samples from dilatometric analyses were then subjected to microstructural analyses and hardness measurements to characterize the microstructure and hardness for every tested heat treatment regime. The second part of this article, entitled "EXPERIMENTAL DETERMINATION OF CONTINUOUS COOLING TRANSFORMATION DIAGRAM FOR HIGH STRENGTH STEEL X153CRMOV12", deals with these analyses of the cooling curve microstructure.

Development of Heat Treatment Mode with Quenching in Different Quenching Environments for the Casing Pipe in Order to Obtain the Required Mechanical Properties

2020 ◽  
Vol 836 ◽  
pp. 41-45
Author(s):  
S.N. Dzhabbarov ◽  
E.I. Pryakhin
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Mechanical Characteristics ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Treatment Mode ◽  
Gas Industry ◽  
Heat Treatment Mode ◽  
Optimal Technology ◽  
Casing Pipe

Development of an optimal technology of heat treatment for blanks of the casing pipe made of steel 40H (GOST 4543) is used in the oil and gas industry for casing. It is accompanied by quenching in various environments to ensure guaranteed obtainment of the required mechanical characteristics. These characteristics are specified in GOST 632-80 and met in order to improve the properties of the 40H steel.

scholarly journals Heat treatment mode optimization of dissimilar weld joints of EP517 steel to 36NKhTYu alloy

2020 ◽  
Vol 759 ◽  
pp. 012024
Author(s):  
E V Terentyev ◽  
A Yu Marchenkov ◽  
A L Goncharov ◽  
A P Sliva ◽  
K T Borodavkina
Keyword(s):  
Heat Treatment ◽  
Treatment Mode ◽  
Dissimilar Weld ◽  
Weld Joints ◽  
Heat Treatment Mode ◽  
36Nkhtyu Alloy
Sign in / Sign up

Export Citation Format

Share Document