scholarly journals Oil And Gas Generation History Based On Burial History Reconstruction And Thermal Maturity Modeling Of Petroleum Systems In Northern Iraq

2020 ◽  
Vol 10 (4) ◽  
pp. 95-120
Author(s):  
Rzger Abdulkarim Abdula
Keyword(s):  
Source Rock ◽  
Late Cretaceous ◽  
Oil And Gas ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Thermal Maturity ◽  
Burial History ◽  
Gas Generation ◽  
Northern Iraq ◽  
Oil Generation

Burial history, thermal maturity, and timing of hydrocarbon generation were modeled for five key source-rock horizons at five locations in Northern Iraq. Constructed burial-history locations from east to west in the region are: Taq Taq-1; Qara Chugh-2; Zab-1; Guwair-2; and Shaikhan-2 wells. Generally, the thermal maturity status of the burial history sites based on increasing thermal maturity is Shaikhan-2 < Zab-1 < Guwair-2 < Qara Chugh-2 < Taq Taq-1. In well Qara Chugh-2, oil generation from Type-IIS kerogen in Geli Khana Formation started in the Late Cretaceous. Gas generation occurred at Qara Chugh-2 from Geli Khana Formation in the Late Miocene. The Kurra Chine Formation entered oil generation window at Guwair-2 and Shaikhan-2 at 64 Ma and 46 Ma, respectively. At Zab-1, the Baluti Formation started to generate gas at 120 Ma. The Butmah /Sarki reached peak oil generation at 45 Ma at Taq Taq-1. The main source rock in the area, Sargelu Formation started to generate oil at 47, 51, 33, 28, and 28 Ma at Taq Taq-1, Guwair-2, Shaikhan-2, Qara Chugh-2, and Zab-1, respectively. The results of the models demonstrated that peak petroleum generation from the Jurassic oil- and gas-prone source rocks in the most profound parts of the studied area occurred from Late Cretaceous to Middle Oligocene. At all localities, the Sargelu Formation is still within the oil window apart from Taq Taq-1 and Qara Chugh-2 where it is in the oil cracking and gas generation phase.

scholarly journals Reconstruction of burial history, temperature, source rock maturity and hydrocarbon generation in the northwestern Dutch offshore

2012 ◽  
Vol 91 (4) ◽  
pp. 535-554 ◽  
Author(s):  
R. Abdul Fattah ◽  
J.M. Verweij ◽  
N. Witmans ◽  
J.H. ten Veen
Keyword(s):  
Source Rock ◽  
Source Rocks ◽  
Northwestern Part ◽  
Hydrocarbon Generation ◽  
Burial History ◽  
Coal Seams ◽  
Gas Generation ◽  
Offshore Area ◽  
The North ◽  
Late Generation

Abstract3D basin modelling is used to investigate the history of maturation and hydrocarbon generation on the main platforms in the northwestern part of the offshore area of the Netherlands. The study area covers the Cleaverbank and Elbow Spit Platforms. Recently compiled maps and data are used to build the input geological model. An updated and refined palaeo water depth curve and newly refined sediment water interface temperatures (SWIT) are used in the simulation. Basal heat flow is calculated using tectonic models. Two main source rock intervals are defined in the model, Westphalian coal seams and pre-Westphalian shales, which include Namurian and Dinantian successions. The modelling shows that the pre-Westphalian source rocks entered the hydrocarbon generation window in the Late Carboniferous. In the southern and central parts of the study area, the Namurian started producing gas in the Permian. In the north, the Dinantian source rocks appear to be immature. Lower Westphalian sediments started generating gas during the Upper Triassic. Gas generation from Westphalian coal seams increased during the Paleogene and continues in present-day. This late generation of gas from Westphalian coal seams is a likely source for gas accumulations in the area.Westphalian coals might have produced early nitrogen prior to or during the main gas generation occurrence in the Paleogene. Namurian shales may be a source of late nitrogen after reaching maximum gas generating phase in the Triassic. Temperatures reached during the Mid Jurassic were sufficiently high to allow the release of non-organic nitrogen from Namurian shales.

Hydrocarbon Generation Indication from Source Rock to Reservoir Rock: Case Studies of Anambra and Abakaliki Basins South-Eastern Nigeria

2016 ◽  
Author(s):  
Samuel Salufu ◽  
Rita Onolemhemhen ◽  
Sunday Isehunwa
Keyword(s):  
Case Studies ◽  
Source Rock ◽  
Oil And Gas ◽  
Vitrinite Reflectance ◽  
Source Rocks ◽  
Reservoir Rock ◽  
Hydrocarbon Generation ◽  
Geochemical Analysis ◽  
Anambra Basin ◽  
Oil Generation

ABSTRACT This paper sought to use information from outcrop sections to characterize the source and reservoir rocks in a basin in order to give indication(s) for hydrocarbon generation potential in a basin in minimizing uncertainty and risk that are allied with exploration and field development of oil and gas, using subsurface data from well logs, well sections, seismic and core. The methods of study includes detailed geological, stratigraphical, geochemical, structural,, petro-graphical, and sedimentological studies of rock units from outcrop sections within two basins; Anambra Basin and Abakaliki Basin were used as case studies. Thirty eight samples of shale were collected from these Basins; geochemical analysis (rockeval) was performed on the samples to determine the total organic content (TOC) and to assess the oil generating window. The results were analyzed using Rock wares, Origin, and Surfer software in order to properly characterize the potential source rock(s) and reservoir rock(s) in the basins, and factor(s) that can favour hydrocarbon traps. The results of the geological, stratigraphical, sedimentological, geochemical, and structural, were used to developed a new model for hydrocarbon generation in the Basins. The result of the geochemical analysis of shale samples from the Anambra Basin shows that the TOC values are ≥ 1wt%, Tmax ≥ 431°C, Vitrinite reflectance values are ≥ 0.6%, and S1+S2 values are &gt; 2.5mg/g for Mamu Formation while shale samples from other formations within Anambra Basin fall out of these ranges. The shale unit in the Mamu Formation is the major source rock for oil generation in the Anambra Basin while others have potential for gas generation with very little oil generation. The shale samples from Abakaliki Basin shows that S1+S2 values range from&lt; 1 – 20mg/g, TOC values range from 0.31-4.55wt%, vitrinite reflectance ranges from 0.41-1.24% and Tmax ranges from423°C – 466°C. This result also shows that there is no source rock for oil generation in Abakaliki Basin; it is either gas or graphite. This observation indicates that all the source rocks within Abakaliki Basin have exceeded petroleum generating stage due to high geothermal heat resulting from deep depth or the shale units have not attained catagenesis stage as a result of S1+S2 values lesser than 2.5mg/g despite TOC values of ≥ 0.5wt% and vitrinite reflectance values of ≥ 0.6%. The novelty of this study is that the study has been able to show that here there is much more oil than the previous authors claimed, and the distribution of this oil and gas in the basins is controlled by two major factors; the pattern of distribution of the materials of the source rock prior to subsidence and during the subsidence period in the basin, and the pattern and the rate of tectonic activities, and heat flow in the basin. If these factors are known, it would help to reduce the uncertainties associated with exploration for oil and gas in the two basins.

scholarly journals Evaluation of hydrocarbons generated from the Permo-Carboniferous source rocks in Huanghua Depression of the Bohai Bay Basin, China

2018 ◽  
Vol 36 (5) ◽  
pp. 1229-1244
Author(s):  
Xiao-Rong Qu ◽  
Yan-Ming Zhu ◽  
Wu Li ◽  
Xin Tang ◽  
Han Zhang
Keyword(s):  
Oil And Gas ◽  
Source Rocks ◽  
Bohai Bay ◽  
Hydrocarbon Generation ◽  
Burial History ◽  
Bohai Bay Basin ◽  
Important Conclusion ◽  
The North ◽  
Huanghua Depression ◽  
History Of

The Huanghua Depression is located in the north-centre of Bohai Bay Basin, which is a rift basin developed in the Mesozoic over the basement of the Huabei Platform, China. Permo-Carboniferous source rocks were formed in the Huanghua Depression, which has experienced multiple complicated tectonic alterations with inhomogeneous uplift, deformation, buried depth and magma effect. As a result, the hydrocarbon generation evolution of Permo-Carboniferous source rocks was characterized by discontinuity and grading. On the basis of a detailed study on tectonic-burial history, the paper worked on the burial history, heating history and hydrocarbon generation history of Permo-Carboniferous source rocks in the Huanghua Depression combined with apatite fission track testing and fluid inclusion analyses using the EASY% Ro numerical simulation. The results revealed that their maturity evolved in stages with multiple hydrocarbon generations. In this paper, we clarified the tectonic episode, the strength of hydrocarbon generation and the time–spatial distribution of hydrocarbon regeneration. Finally, an important conclusion was made that the hydrocarbon regeneration of Permo-Carboniferous source rocks occurred in the Late Cenozoic and the subordinate depressions were brought forward as advantage zones for the depth exploration of Permo-Carboniferous oil and gas in the middle-northern part of the Huanghua Depression, Bohai Bay Basin, China.

scholarly journals GEOCHEMICAL AND GEOSTATISTICAL ASSESSMENT OF CRETACEOUS COALS AND SHALES IN SOME NIGERAIN SEDIMENTARY BASINS FOR THEIR HYDROCARBON PRONESS AND MATURITY LEVELS

2020 ◽  
Vol 1 (2) ◽  
Keyword(s):  
Source Rock ◽  
Oil And Gas ◽  
Linear Regression Analysis ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Good Source ◽  
Type Iii ◽  
Limit Value ◽  
The Impact

The Rock–Eval pyrolysis and LECO analysis for 9 shale and 12 coal samples, as well as, geostatistical analysis have been used to investigate source rock characteristics, correlation between the assessed parameters (QI, BI, S1, S2, S3, HI, S1 + S2, OI, PI, TOC) and the impact of changes in the Tmax on the assessed parameters in the Cretaceous Sokoto, Anambra Basins and Middle Benue Trough of northwestern, southeastern and northcentral Nigeria respectively. The geochemical results point that about 97% of the samples have TOC values greater than the minimum limit value (0.5 wt %) required to induce hydrocarbon generation from source rocks. Meanwhile, the Dukamaje and Taloka shales and Lafia/Obi coal are found to be fair to good source rock for oil generation with slightly higher thermal maturation. The source rocks are generally immature through sub-mature to marginal mature with respect to the oil and gas window, while the potential source rocks from the Anambra Basin are generally sub-mature grading to mature within the oil window. The analyzed data were approached statistically to find some relations such as factors, and clusters concerning the examination of the source rocks. These factors were categorized into type of organic matter and organic richness, thermal maturity and hydrocarbon potency. In addendum, cluster analysis separated the source rocks in the study area into two groups. The source rocks characterized by HI >240 (mg/g), TOC from 58.89 to 66.43 wt %, S1 from 2.01 to 2.54 (mg/g) and S2 from 148.94 to 162.52 (mg/g) indicating good to excellent source rocks with kerogen of type II and type III and are capable of generating oil and gas. Followed by the Source rocks characterized by HI <240 (mg/g), TOC from 0.94 to 36.12 wt%, S1 from 0.14 to 0.72 (mg/g) and S2 from 0.14 to 20.38 (mg/g) indicating poor to good source rocks with kerogen of type III and are capable of generating gas. Howeverr, Pearson’s correlation coefficient and linear regression analysis shows a significant positive correlation between TOC and S1, S2 and HI and no correlation between TOC and Tmax, highly negative correlation between TOC and OI and no correlation between Tmax and HI. Keywords- Cretaceous, Geochemical, Statistical, Cluster; Factor analyses.

Overview of geologic evolution and hydrocarbon generation of the Pannonian Basin

2018 ◽  
Vol 6 (1) ◽  
pp. SB111-SB122 ◽  
Author(s):  
Ferenc Horváth ◽  
Ivan Dulić ◽  
Alan Vranković ◽  
Balázs Koroknai ◽  
Tamás Tóth ◽  
...  
Keyword(s):  
Late Miocene ◽  
Pannonian Basin ◽  
Hydrocarbon Generation ◽  
Burial History ◽  
Gas Generation ◽  
Vertical Movements ◽  
Delta Plain ◽  
Marine Strata ◽  
Shelf Slope ◽  
Oil Generation

The Pannonian Basin is an intraorogenic extensional region floored by a complex system of Alpine orogenic terranes and oceanic suture zones. Its formation dates back to the beginning of the Miocene, and initial fluvial-lacustrine deposits pass into shallow to open marine strata, including a large amount of calc-alkaline volcanic materials erupted during the culmination of the synrift phase. The onset of the postrift phase occurred during the Late Miocene, when the basin became isolated and a large Pannonian lake developed. Early lacustrine marls are overlain by turbiditic sandstones and silts related to a progradational shelf slope and a delta plain sequence passing upward into alluvial plain deposits and eolian sands. A remarkable nonconformity at the top of lacustrine strata associated with a significant (4–7 my) time gap at large parts of the basin documents a neotectonic phase of activity, manifested by regional strike-slip faulting and kilometer-scale differential vertical movements, with erosion and redeposition. Subsidence and burial history modeling indicate that Middle and Late Miocene, fairly organic-rich marine and lacustrine (respectively) shales entered into the oil-generation window at about the beginning of the Pliocene in depocenters deeper than 2.5–3 km, and even reached the wet to dry gas-generation zone at depths exceeding 4–4.5 km. Migration out of these kitchens has been going on since the latest Miocene toward basement highs, where anticlines and flower structures offered adequate trapping conditions for hydrocarbons. We argue that compaction of thick sedimentary piles, in addition to neotectonic structures, has also been important in trap formation within the Pannonian Basin.

Liquid hydrocarbon characterization of the lacustrine Yanchang Formation, Ordos Basin, China: Organic-matter source variation and thermal maturity

2017 ◽  
Vol 5 (2) ◽  
pp. SF225-SF242 ◽  
Author(s):  
Xun Sun ◽  
Quansheng Liang ◽  
Chengfu Jiang ◽  
Daniel Enriquez ◽  
Tongwei Zhang ◽  
...  
Keyword(s):  
Organic Matter ◽  
Source Rock ◽  
Ordos Basin ◽  
Depositional Environments ◽  
Source Rocks ◽  
Type I ◽  
Hydrocarbon Generation ◽  
Type Ii ◽  
Thermal Maturity ◽  
Yanchang Formation

Source-rock samples from the Upper Triassic Yanchang Formation in the Ordos Basin of China were geochemically characterized to determine variations in depositional environments, organic-matter (OM) source, and thermal maturity. Total organic carbon (TOC) content varies from 4 wt% to 10 wt% in the Chang 7, Chang 8, and Chang 9 members — the three OM-rich shale intervals. The Chang 7 has the highest TOC and hydrogen index values, and it is considered the best source rock in the formation. Geochemical evidence indicates that the main sources of OM in the Yanchang Formation are freshwater lacustrine phytoplanktons, aquatic macrophytes, aquatic organisms, and land plants deposited under a weakly reducing to suboxic depositional environment. The elevated [Formula: see text] sterane concentration and depleted [Formula: see text] values of OM in the middle of the Chang 7 may indicate the presence of freshwater cyanobacteria blooms that corresponds to a period of maximum lake expansion. The OM deposited in deeper parts of the lake is dominated by oil-prone type I or type II kerogen or a mixture of both. The OM deposited in shallower settings is characterized by increased terrestrial input with a mixture of types II and III kerogen. These source rocks are in the oil window, with maturity increasing with burial depth. The measured solid-bitumen reflectance and calculated vitrinite reflectance from the temperature at maximum release of hydrocarbons occurs during Rock-Eval pyrolysis ([Formula: see text]) and the methylphenanthrene index (MPI-1) chemical maturity parameters range from 0.8 to [Formula: see text]. Because the thermal labilities of OM are associated with the kerogen type, the required thermal stress for oil generation from types I and II mixed kerogen has a higher and narrower range of temperature for hydrocarbon generation than that of OM dominated by type II kerogen or types II and III mixed kerogen deposited in the prodelta and delta front.

PETROLEUM SOURCE ROCKS IN THE ROPER GROUP OF THE MCARTHUR BASIN: SOURCE CHARACTERISATION AND MATURITY DETERMINATIONS USING PHYSICAL AND CHEMICAL METHODS

1994 ◽  
Vol 34 (1) ◽  
pp. 279 ◽  
Author(s):  
Dennis Taylor ◽  
Aleksai E. Kontorovich ◽  
Andrei I. Larichev ◽  
Miryam Glikson
Keyword(s):  
Organic Matter ◽  
Chemical Evolution ◽  
Oil And Gas ◽  
Source Rocks ◽  
Type I ◽  
Peak Oil ◽  
Gas Generation ◽  
Oil Generation ◽  
Physical And Chemical ◽  
Extractable Organic Matter

Organic rich shale units ranging up to 350 m in thickness with total organic carbon (TOC) values generally between one and ten per cent are present at several stratigraphic levels in the upper part of the Carpentarian Roper Group. Considerable variation in depositional environment is suggested by large differences in carbon:sulphur ratios and trace metal contents at different stratigraphic levels, but all of the preserved organic matter appears to be algal-sourced and hydrogen-rich. Conventional Rock-Eval pyrolysis indicates that a type I-II kerogen is present throughout.The elemental chemistry of this kerogen, shows a unique chemical evolution pathway on the ternary C:H:ONS diagram which differs from standard pathways followed by younger kerogens, suggesting that the maturation histories of Proterozoic basins may differ significantly from those of younger oil and gas producing basins. Extractable organic matter (EOM) from Roper Group source rocks shows a chemical evolution from polar rich to saturate rich with increasing maturity. Alginite reflectance increases in stepwise fashion through the zone of oil and gas generation, and then increases rapidly at higher levels of maturation. The increase in alginite reflectance with depth or proximity to sill contacts is lognormal.The area explored by Pacific Oil and Gas includes a northern area where the Velkerri Formation is within the zone of peak oil generation and the Kyalla Member is immature, and a southern area, the Beetaloo sub-basin, where the zone of peak oil generation is within the Kyalla Member. Most oil generation within the basin followed significant folding and faulting of the Roper Group.

Geochemical characterization of the source rock intervals, Beni-Suef Basin, West Nile Valley, Egypt

2021 ◽  
Vol 13 (1) ◽  
pp. 1536-1551
Author(s):  
Nader A. A. Edress ◽  
Saudy Darwish ◽  
Amir Ismail
Keyword(s):  
Heat Flow ◽  
Source Rock ◽  
High Heat ◽  
Source Rocks ◽  
Nile Valley ◽  
Peak Oil ◽  
Burial History ◽  
Depth Limit ◽  
Oil Generation ◽  
Rock Depth

Abstract Geochemical and lithological investigations in the WON C-3X well record five organic-matter-rich intervals (OMRIs) of effective source rocks. These OMRIs correspond to moderate and good potentials. Two of these intervals occurred within the L-Kharita member of the Albian age represent 60.97% of the entire Albian thickness. The rest of OMRIs belongs to the Abu-Roash G and F members of the Late Cenomanian–Santonian age comprising 17.52 and 78.66% of their total thickness, respectively. The calculated heat flow of the studied basin is high within the range of 90.1–95.55 mW/m2 from shallower Abu-Roash F to deeper L-Kharita members. This high-heat flow is efficient for shallowing in the maximum threshold expulsion depth in the studied well to 2,000 m and active source rock depth limit to 2,750 m. Thermal maturity and burial history show that the source rock of L-Kharita entered the oil generation from 97 Ma till the late oil stage of 7.5 Ma, whereas the younger Abu-Roash G and F members have entered oil generation since 56 Ma and not reached peak oil yet. Hence, the source rock intervals from Abu-Roash F and G are promising for adequate oil generation.

scholarly journals Burial history, thermal history and hydrocarbon generation modelling of the Jurassic source rocks in the basement of the Polish Carpathian Foredeep and Outer Carpathians (SE Poland)

2012 ◽  
Vol 63 (4) ◽  
pp. 335-342 ◽  
Author(s):  
Paweł Kosakowski ◽  
Magdalena Wróbel
Keyword(s):  
Organic Matter ◽  
Thermal History ◽  
Vitrinite Reflectance ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Thermal Maturity ◽  
Burial History ◽  
Se Poland ◽  
Carpathian Foredeep ◽  
Outer Carpathians

Burial history, thermal history and hydrocarbon generation modelling of the Jurassic source rocks in the basement of the Polish Carpathian Foredeep and Outer Carpathians (SE Poland)Burial history, thermal maturity, and timing of hydrocarbon generation were modelled for the Jurassic source rocks in the basement of the Carpathian Foredeep and marginal part of the Outer Carpathians. The area of investigation was bounded to the west by Kraków, to the east by Rzeszów. The modelling was carried out in profiles of wells: Będzienica 2, Dębica 10K, Góra Ropczycka 1K, Goleszów 5, Nawsie 1, Pławowice E1 and Pilzno 40. The organic matter, containing gas-prone Type III kerogen with an admixture of Type II kerogen, is immature or at most, early mature to 0.7 % in the vitrinite reflectance scale. The highest thermal maturity is recorded in the south-eastern part of the study area, where the Jurassic strata are buried deeper. The thermal modelling showed that the obtained organic matter maturity in the initial phase of the "oil window" is connected with the stage of the Carpathian overthrusting. The numerical modelling indicated that the onset of hydrocarbon generation from the Middle Jurassic source rocks was also connected with the Carpathian thrust belt. The peak of hydrocarbon generation took place in the orogenic stage of the overthrusting. The amount of generated hydrocarbons is generally small, which is a consequence of the low maturity and low transformation degree of kerogen. The generated hydrocarbons were not expelled from their source rock. An analysis of maturity distribution and transformation degree of the Jurassic organic matter shows that the best conditions for hydrocarbon generation occurred most probably in areas deeply buried under the Outer Carpathians. It is most probable that the "generation kitchen" should be searched for there.

Sign in / Sign up

Export Citation Format

Share Document