scholarly journals Appraisal of Drinking Water Quality in Lahore Residence, Pakistan

Author(s):  
Khalid Mahmood ◽  
Muhammad Asim

A comprehensive study for the spatial distribution of drinking water quality had been conductedfor residential area of Lahore, Pakistan. The study had made use of the geographic information system(GIS) for geographical representation and spatial analysis of groundwater quality. Physicochemicalparameters including electric conductivity, pH, TDS, Cl, Mg, Ca, alkalinity and bicarbonates from 73 ofthe water samples had been included in the analysis. Water quality data had been geo-referenced followedby its interpolation using inverse distance weighted (IDW) for each of the parameters. Very high alkalinityand bicarbonates values were observed in most parts of the area. For the comprehensive view, water qualityindex map had been prepared using weighted overlay analysis (WOA). The water quality index map wasclassified into five zones of excellent, good, poor, very poor and unfit for drinking as per WHO standardsof drinking water. 21% region had excellent quality of the underground water and 50% was found goodfor drinking. Poor quality of water was found in southeastern part, covering 27% of the study area. Only2% of the area was found under the very poor and unfit water quality conditions for drinking.

2013 ◽  
Vol 17 (2) ◽  
pp. 150-160 ◽  
Author(s):  
Caterina Scaramelli

This paper takes water quality as an ethnographic subject. It looks at how water quality monitors in Boston make sense of the quality of water through mundane engagement with three non-human beings who they encounter during their monitoring activities: herring, bacteria and water lily. Each of these organisms suggests a different understanding of water quality for the monitors and poses a dilemma. Water quality monitors who contribute to the production of water quality data come to know water quality as through direct interactions with these beings, mediated by both sensorial experience and laboratory data. These experiences, at the same time, confuse and redraw relationships between science, water flows, non-human vitality, including that of invasive species, and people.


2005 ◽  
Vol 5 (2) ◽  
pp. 123-134 ◽  
Author(s):  
R. Miller ◽  
B. Whitehill ◽  
D. Deere

This paper comments on the strengths and weaknesses of different methodologies for risk assessment, appropriate for utilisation by Australian Water Utilities in risk assessment for drinking water source protection areas. It is intended that a suggested methodology be recommended as a national approach to catchment risk assessment. Catchment risk management is a process for setting priorities for protecting drinking water quality in source water areas. It is structured through a series of steps for identifying water quality hazards, assessing the threat posed, and prioritizing actions to address the threat. Water management organisations around Australia are at various stages of developing programs for catchment risk management. While much conceptual work has been done on the individual components of catchment risk management, work on these components has not previously been combined to form a management tool for source water protection. A key driver for this project has been the requirements of the National Health and Medical Research Council Framework for the Management of Drinking Water Quality (DWQMF) included in the draft 2002 Australian Drinking Water Guidelines (ADWG). The Framework outlines a quality management system of steps for the Australian water industry to follow with checks and balances to ensure water quality is protected from catchment to tap. Key steps in the Framework that relate to this project are as follows: Element 2 Assessment of the Drinking Water Supply System• Water Supply System analysis• Review of Water Quality Data• Hazard Identification and Risk Assessment Element 3 Preventive Measures for Drinking Water Quality Management• Preventive Measures and Multiple Barriers• Critical Control Points This paper provides an evaluation of the following risk assessment techniques: Hazard Analysis and Critical Control Points (HACCP); World Health Organisation Water Safety Plans; Australian Standard AS 4360; and The Australian Drinking Water Guidelines – Drinking Water Quality Management Framework. These methods were selected for assessment in this report as they provided coverage of the different approaches being used across Australia by water utilities of varying: scale of water management organisation; types of water supply system management; and land use and activity-based risks in the catchment area of the source. Initially, different risk assessment methodologies were identified and reviewed. Then examples of applications of those methods were assessed, based on several key water utilities across Australia and overseas. Strengths and weaknesses of each approach were identified. In general there seems some general grouping of types of approaches into those that: cover the full catchment-to-tap drinking water system; cover just the catchment area of the source and do not recognise downstream barriers or processes; use water quality data or land use risks as a key driving component; and are based primarily on the hazard whilst others are based on a hazardous event. It is considered that an initial process of screening water quality data is very valuable in determining key water quality issues and guiding the risk assessment, and to the overall understanding of the catchment and water source area, allowing consistency with the intentions behind the ADWG DWQM Framework. As such, it is suggested that the recommended national risk assessment approach has two key introductory steps: initial screening of key issues via water quality data, and land use or activity scenario and event-based HACCP-style risk assessment. In addition, the importance of recognising the roles that uncertainty and bias plays in risk assessments was highlighted. As such it was deemed necessary to develop and integrate uncertainty guidelines for information used in the risk assessment process. A hybrid risk assessment methodology was developed, based on the HACCP approach, but with some key additions and modifications to make it applicable to varying catchment risks, water supply operation needs and environmental management processes.


2020 ◽  
Vol 31 (2) ◽  
pp. 99-105
Author(s):  
Hemant Pathak

AbstractThe present study uses numerous chemometric techniques to evaluate and interpret a water quality data obtained from the drinking water resources namely municipal water (supplied by Rajghat dam on Bewas River), bore well, ground water of Sagar city, a divisional headquarter of Madhya Pradesh, India. Data was collected from May 2018 to June 2019 for 10 parameters used to assess the status of the water quality. Water quality was monitored at 15 sampling stations along the entire district. The data were analyzed using chemometric analysis such as principal component analysis, correlation matrix, multivariate linear regression analysis and hierarchical cluster analysis that reduced the data dimensions for better interpretation. Results of statistical analysis expressed that slightly higher value of BOD in some areas due to sewage contamination, need of chlorination treatment required at those places. This study also presents the value of diverse statistical methods for assessment and analysis of drinking water quality data for the reason of monitoring the effectiveness of water resource management. The study indicated that the maximum quality parameters of drinking water is in permissible limits of WHO and IS: 10500 guidelines on entire study places.


2020 ◽  
Vol 2020 ◽  
pp. 1-6
Author(s):  
Banan Hejaz ◽  
Issam A. Al-Khatib ◽  
Nidal Mahmoud

Like several parts in the Middle East, the West Bank is in a significant water scarcity status. Palestinians use groundwater as the main water source, supplying more than 90% of the consumed water in the West Bank. The aim of this study is to enhance the knowledge on drinking water quality in the West Bank. Groundwater quality data was obtained from the Palestinian Water Authority, including the years 2015 and 2016, from the Northern six districts of the West Bank. The water quality data were analyzed and matched with the World Health Organization (WHO) guidelines and the Palestinian standards for drinking water quality. The findings of this study revealed that groundwater in the north of the West Bank comply with several drinking water requirements including total hardness, pH, and sodium and chloride content. Conversely, 18% of the samples exceed the limits for nitrate concentration. The fecal Coliforms and total Coliforms results show that 98.7% of the samples give no risk, but 1.3% of the samples give low risk, and no sample gives intermediate-to-high risks. The microbial and chemical pollution of groundwater is postulated to inadequate wastewater management, high use of fertilizers, and uncontrolled disposal of animal manure. Therefore, it is crucial to disinfect drinking water at the source of production before supply as an immediate action, followed by implementing pollution prevention measures.


2010 ◽  
Vol 18 (NA) ◽  
pp. 291-307 ◽  
Author(s):  
Claire F. McGuigan ◽  
Camille L.A. Hamula ◽  
Sarah Huang ◽  
Stephan Gabos ◽  
X. Chris Le

Recent events have increased public awareness of drinking water quality in Canada. The goal of this review was to examine how much information about arsenic (As) in Canadian drinking water is available. Provincial, territorial, and federal Web sites were searched for information about As in drinking water. Major scientific databases (PubMed, Web of Science) were searched for drinking water As information for all provinces and territories. Resulting information was examined for availability, accessibility, quality, and timeliness. Most provinces provided at least basic fact sheets about As, and several provinces provided comprehensive databases containing actual test results. The vast majority of Canadian municipal drinking water systems with As data show a concentration below 10 μg/L, the current guideline level. Several locations in Alberta, British Columbia, Manitoba, New Brunswick, Newfoundland and Labrador, Nova Scotia, Québec, and Saskatchewan have localized elevations of As (“hotspots”, >10 μg/L As); this information is available at the provincial level, but may not include exact locations nor the degree by which they exceed the current guideline limit of 10 μg/L. For other locations, however, little information is available. The lack of a centralized information source represents a significant obstacle to obtaining drinking water quality data. Although difficult to implement, a centralized and standardized source of national drinking water quality data is urgently needed to determine the effects of As and other contaminants on Canadians.


Author(s):  
Shefaliben Sureshbhai Patel ◽  
Susmita Sahoo

The seasonal investigation about the water quality from Damanganga river estuary on two habitats downstream and upstream was carried out from January to December 2019 containing three major seasons: winter, summer and monsoon. For this monitoring activity total 29 parameters (24 physico-chemical parameters and 5 heavy metals) were analyzed. Multivariate analyses suggested inter dependency among these studied parameters. Water Quality Index is computed based on the major fluctuated and affected parameters. The calculated values of WQI for all three seasons ranged from 122.84 to 173.82 which suggested poor water quality of the water body. WQI values of the investigation area proposed that the estuarine water quality is deteriorated due to high value of presented heavy metals (Aluminum, Iron, Manganese, Boron and Zinc), Chloride, Ammonium and Sulfate in water sample. In this case, the downstream station is having accessional pollutant contaminations while the upstream station is having diminutive pollutant contaminants. Temporally, the dominant frailty found during the winter followed by summer and monsoon. This study field exhibited poor quality of water; the reason behind this might be the impressive surrounding industrial zone as well as other anthropogenic activities. There is quite normal probability distribution expressed by the represented water quality data at the both habitats. The Bray-Curtis cluster analysis shows different percentage similarity level between the water quality parameters.  


Author(s):  
S. I. Ehiorobo ◽  
A. E. Ogbeibu

The water quality of the Okomu Wetland was evaluated using the Water Quality Index (WQI) technique which provides a number that expresses overall water quality of a water body or water sample at a particular time. Sampling of physicochemical parameters spanned two years covering the wet and dry seasons and the water quality data were obtained from 10 sampling locations; Ponds 36, 52, 54, 61, 64, 90, 94, Arhakhuan Stream, Okomu River (Agekpukpu) and Okomu River (Iron bridge) all within the Okomu National Park. Parameters such as Total Dissolved Solids (TDS), Turbidity, pH, Electrical conductivity (EC), Chlorine (Cl), Nitrate (NO3), Sulphate (SO4), Sodium (Na), Magnesium (Mg), (Iron) Fe, Chromium (Cr), Zinc (Zn), Copper (Cu), Manganese (Mn), Lead (Pb), and Nikel (Ni) were used to compute WQI and the values obtained for the wetland ranged between 34.36 and 167.28. The Index shows that pond 36, 52 and 54 are unfit for drinking with values between 103.86 and 167.28; ponds 61 and 64 are of the very poor quality category with WQI values of 95.19 and 92.44 respectively, Pond 90, pond 94, Arhakhuan Stream and Okomu River (Agekpukpu) are of poor quality and WQI values between and 53.58 and 73.15. Whereas, the Okomu River (Iron bridge) is within the good water quality (34.36) category. The Okomu River by Iron bridge is of good quality rating while other sampled points were of poor, very poor or unfit for drinking though these water bodies are mostly free from anthropogenic activities because of the conservative status of the study area. A major source of pollution within the wetland is surface runoff. The water quality of the wetland may not be suitable for man’s consumption especially pond water which are majorly impacted by runoff, yet very important for the survival and sustenance of the forest animals and plants. The water quality index (WQI) interprets physicochemical characteristics of water by providing a value which expresses the overall water quality and thus, reveals possible pollution problems of a water body. It turns complex water quality data into information that is easily understandable and usable by scientists, researchers and the general public.


2018 ◽  
Vol 73 ◽  
pp. 04013
Author(s):  
Deddy Caesar Agusto ◽  
Eko Kusratmoko

The river is the main source of water in Indonesia, which at the moment, this quality tends to get worse and is no longer worth consuming for various needs. The cause of the pollution is the entry of pollutants both point source (industrial waste) and non-point source (residential and agricultural land). Rainfall can be a non-point source pollutant agent from a watershed to a water body. The impact of rainfall on increasing concentrations of pollutants is very significant, especially the high intensity rainfall that falls after the long dry season. In this study, water quality data is obtained from river outlets located in Damkamun taken every 30 minutes during the rainfall event so that fluctuation in water quality can be seen. Water quality indicators studied in this research are TDS, DHLNitrate, Phosphate and Ph. The author, in analyzing, using rainfall Himawari 8 which is obtained every 10 minutes. The result shows that rainfall is directly related to the water flow and the fluctuation of the discharge affects the water quality. From the calculations, the chemical quality of water is also influenced by the use of land in the watershed. Nitrate value increases when the occurrence of rain occurs in land use while phosphate experiences a high value during the event.


Water ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 1053
Author(s):  
Veronica Scott ◽  
Luke Juran ◽  
Erin J. Ling ◽  
Brian Benham ◽  
Asa Spiller

A total of 1.7 million Virginians rely on private drinking water (PDW) systems and 1.3 million of those people do not know their water quality. Because most Virginians who use PDW do not know the quality of that water and since strontium poses a public health risk, this study investigates sources of strontium in PDW in Virginia and identifies the areas and populations most vulnerable. Physical factors such as rock type, rock age, and fertilizer use have been linked to elevated strontium concentrations in drinking water. Social factors such as poverty, poor diet, and adolescence also increase social vulnerability to health impacts of strontium. Using water quality data from the Virginia Household Water Quality Program (VAHWQP) and statistical and spatial analyses, physical vulnerability was found to be highest in the Ridge and Valley province of Virginia where agricultural land use and geologic formations with high strontium concentrations (e.g., limestone, dolomite, sandstone, shale) are the dominant aquifer rocks. In terms of social vulnerability, households with high levels of strontium are more likely than the average VAHWQP participant to live in a food desert. This study provides information to help 1.7 million residents of Virginia, as well as populations in neighboring states, understand their risk of exposure to strontium in PDW.


1986 ◽  
Vol 18 (4-5) ◽  
pp. 43-52 ◽  
Author(s):  
Tetsuya Kusuda ◽  
Tohru Futawatari ◽  
Youichi Awaya ◽  
Kenichi Koga ◽  
Katsuhiro Furumoto

The objectives of this study were to clarify the defects of the current tidal river monitoring method and to propose a better method to obtain water quality data of high quality for tidal rivers. In Japan, the Water Quality Standards for rivers also apply to tidal rivers. The method indicates that water should be sampled from 20% of the water depth below the water surface at an arbitrary time once a month. Since this method was apparently inappropriate to understand the dynamics and water profiles in tidal rivers, field surveys were conducted at different times in the River Rokkaku, which is well mixed. The results showed that the turbidity maximum moved up- and down-stream more than 10 km due to the tide. Based on this fact, a new monitoring method was proposed, which required water samples to be taken with a certain time lag from a high tide at a station. This newly proposed method improved the quality of information on water quality and made data available to ascertain long term trends. Modifications to the new method are suggested to further improve the quality of water quality data for tidal rivers.


Sign in / Sign up

Export Citation Format

Share Document