scholarly journals Detailed Experimental Investigation of A Spark Ignition Engine in A Wide Range of Work

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Melih Yıldız ◽  
Bilge Albayrak Çeper
Keyword(s):  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Heat Dissipation ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Engine Fuel ◽  
Spark Ignition Engines ◽  
Combustion Control ◽  
Wide Range

For years, the goal of vehicle manufacturers; combustion control of spark ignition engines, ease of passage between the various cycles For years, the goal of vehicle manufacturers; combustion control of spark ignition engines, ease of passage between the various cycles, low emission values of diesel engines, high fuel economy and output power, thereby achieving optimum values in internal combustion engines. In this context, to improve the engine performance and increase the volumetric and thermal efficiency of the engine in all operating conditions to minimize the power losses and to reduce the exhaust emissions in order to obtain the maximum power, most economical and without environmental pollution, continues to be updated. In this study, the optimum working map of the engine was obtained by considering the power, torque, specific fuel consumption, cylinder pressure, exhaust gas temperature, thermal efficiency, average effective pressure, heat dissipation rate and emissions of four stroke, two cylinder, spark ignition SI engine fuel.

Hydrogen Fuelled Spark-Ignition Engines: Predictive and Experimental Performance

2003 ◽  
Author(s):  
Hailin Li ◽  
Ghazi A. Karim
Keyword(s):  
Compression Ratio ◽  
Power Efficiency ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Zone Model ◽  
Engine Fuel ◽  
Oxidation Reactions ◽  
Chemical Kinetic Model ◽  
Wide Range

Hydrogen is well recognized as a suitable fuel for spark-ignition engine applications that has many unique attractive features and limitations. It is a fuel that can continue potentially to meet the ever increasingly stringent regulations for exhaust and greenhouse gas emissions. The application of hydrogen as an engine fuel has been tried over many decades by numerous investigators with varying degrees of success. The performance data reported often tend not to display consistent agreement between the various investigators mainly because of the wide differences in engine type, size, operating conditions used and the differing criteria employed to judge whether knock is taking place or not. With the ever-increasing interest in hydrogen as an engine fuel, there is a need to be able to model extensively various features of the performance of spark ignition (S.I.) hydrogen engines so as to investigate and compare reliably the performance of widely different engines under a wide variety of operating conditions. The paper employs a quasi-dimensional two-zone model for the operation of S.I. engines when fuelled with hydrogen. In this approach, the engine combustion chamber at any instant of time during combustion is considered to be divided into two temporally varying zones: a burned zone and an unburned zone. The model incorporates a detailed chemical kinetic model scheme of 30 reaction steps and 12 species, to simulate the oxidation reactions of hydrogen in air. A knock prediction model, developed previously for S.I. methane-hydrogen fuelled engine applications (Shrestha and Karim 1999(a) and 1999(b)) was extended to consider operation on hydrogen. The effects of changes in operating conditions, including a very wide range of variations in equivalence ratio on the onset of knock and its intensity, combustion duration, power, efficiency and operational limits were investigated. The results of this predictive approach were shown to validate well against corresponding experimental results of our own and those of others, obtained mostly in a variable compression ratio CFR engine. On this basis, the effects of changes in some of the key operational engine variables, such as compression ratio, intake temperature and spark timing are presented and discussed. Some guidelines for superior knock free-operation of engines on hydrogen are made also.

Hydrogen Fueled Spark-Ignition Engines Predictive and Experimental Performance

2004 ◽  
Vol 128 (1) ◽  
pp. 230-236 ◽  
Author(s):  
Hailin Li ◽  
Ghazi A. Karim
Keyword(s):  
Compression Ratio ◽  
Power Efficiency ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Zone Model ◽  
Engine Fuel ◽  
Oxidation Reactions ◽  
Chemical Kinetic Model ◽  
Wide Range

Hydrogen is well recognized as a suitable fuel for spark-ignition engine applications that has many unique attractive features and limitations. It is a fuel that can continue potentially to meet the ever-increasingly stringent regulations for exhaust and greenhouse gas emissions. The application of hydrogen as an engine fuel has been tried over many decades by numerous investigators with varying degrees of success. However, the performance data reported often tend not to display consistent agreement between the various investigators, mainly because of the wide differences in engine type, size, operating conditions used, and the differing criteria employed to judge whether knock is taking place or not. With the ever-increasing interest in hydrogen as an engine fuel, there is a need to be able to model extensively various features of the performance of spark ignition (S.I.) hydrogen engines so as to investigate and compare reliably the performance of widely different engines under a wide variety of operating conditions. In the paper we employ a quasidimensional two-zone model for the operation of S.I. engines when fueled with hydrogen. In this approach, the engine combustion chamber at any instant of time during combustion is considered to be divided into two temporally varying zones: a burned zone and an unburned zone. The model incorporates a detailed chemical kinetic model scheme of 30 reaction steps and 12 species, to simulate the oxidation reactions of hydrogen in air. A knock prediction model, developed previously for S.I. methane-hydrogen fueled engine applications was extended to consider operation on hydrogen. The effects of changes in operating conditions, including a very wide range of variations in the equivalence ratio on the onset of knock and its intensity, combustion duration, power, efficiency, and operational limits were investigated. The results of this predictive approach were shown to validate well against the corresponding experimental results, obtained mostly in a variable compression ratio CFR engine. On this basis, the effects of changes in some of the key operational engine variables, such as compression ratio, intake temperature, and spark timing are presented and discussed. Some guidelines for superior knock-free operation of engines on hydrogen are also made.

Assessing the Influence of Compression Ratio on Engine Characteristics Including Operational Limits of a Biogas-Fueled Spark-Ignition Engine

2020 ◽  
Vol 142 (12) ◽  
Author(s):  
Sachin Kumar Gupta ◽  
Mayank Mittal
Keyword(s):  
Compression Ratio ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Operating Range ◽  
Indicated Mean Effective Pressure ◽  
Wide Range

Abstract Biogas, which is a renewable alternative fuel, has high antiknocking properties with the potential to substitute fossil fuels in internal combustion engines. In this study, performance characteristics of a spark-ignition (SI) engine operated under methane (baseline case) and biogas are compared at the compression ratio (CR) of 8.5:1. Subsequently, the effect of CR on operational limits, performance, combustion, and emission characteristics of the engine fueled with biogas is evaluated. A variable compression ratio, spark-ignition engine was operated at various CRs of 8.5:1, 10:1, 11:1, 13:1, and 15:1 over a wide range of operating loads at 1500 rpm. Results showed that the operating range of the engine at 8.5:1 CR reduced when biogas was utilized in the engine instead of methane. However, the operating range of the engine for biogas extended with an increase in CR—an increase from 9.6 N-m-16.5 N-m to 2.8 N-m-15.1 N-m was observed when CR was increased from 8.5:1 to 15:1. The brake thermal efficiency improved from 13.7% to 16.3%, and the coefficient of variation (COV) of indicated mean effective pressure (IMEP) reduced from 12.7% to 1.52% when CR was increased from 8.5:1 to 15:1 at 8 N-m load. The emission level of carbon dioxide was decreased with an increase in CR due to an improvement in the thermal efficiency and the combustion process.

Optimization of Design and Operational Parameters Using Genetic Algorithm for a Spark Ignition Engine With CNG/H2 Mixtures

2005 ◽  
Author(s):  
G. Anand ◽  
R. Balamurugan
Keyword(s):  
Genetic Algorithm ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Nox Emissions ◽  
Engine Fuel ◽  
Operational Parameters ◽  
Si Engine ◽  
Engine Efficiency ◽  
Wide Range

The present contribution describes the potential of using gaseous fuels like Hythane (CNG/H2 mixtures) as a spark ignition (SI) engine fuel. Genetic Algorithm (GA) is used to optimize the design and operational parameters of a CNG/H2 fueled spark ignition engine for maximizing the engine efficiency subjected to NOx emission constraint. This research deals with quasi-dimensional, two-zone thermodynamic simulation of four-stroke SI engine fueled with CNG/H2 blended fuel for the prediction of the combustion and emission characteristics. The validity of the model has been carried out by comparing the computed results with experimental data obtained under same engine setup and operating conditions. A wide range of engine parameters were optimized using a simple GA regarding both engine efficiency and NOx emissions. The five parameters chosen were compression ratio, engine speed, equivalence ratio, H2 fraction in the fuel, and spark plug position in cylinder head. The amount of NOx emissions was being kept under the constrained value of 750 ppm (< 5 g/kWh), which is less than permissible limit for heavy-duty engines.

Performance and Emissions Characteristics Investigation of a Bi-Fuel SI Engine Fuelled by CNG and Gasoline

2006 ◽  
Author(s):  
Abazar Shamekhi ◽  
Nima Khatibzadeh ◽  
Amir H. Shamekhi
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Engine Performance ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Engine Fuel ◽  
Wide Range ◽  
Performance And Emissions ◽  
Pollutant Sources

Nowadays, increased attention has been focused on internal combustion engine fuels. Regarding environmental effects of internal combustion engines particularly as pollutant sources and depletion of fossil fuel resources, compressed natural gas (CNG) has been introduced as an effective alternative to gasoline and diesel fuel in many applications. A high research octane number allows combustion at higher compression ratios without knocking and good emission characteristics of HC and CO are major benefits of CNG as an engine fuel. In this paper, CNG as an alternative fuel in a spark ignition engine has been considered. Engine performance and exhaust emissions have been experimentally studied for CNG and gasoline in a wide range of the engine operating conditions.

A comparative study of the performance and exhaust emissions of a spark ignition engine fuelled by natural gas and gasoline

1997 ◽  
Vol 211 (1) ◽  
pp. 39-47 ◽  
Author(s):  
R. L. Evans ◽  
J Blaszczyk
Keyword(s):  
Natural Gas ◽  
Engine Performance ◽  
Detailed Comparison ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
Wide Range ◽  
Lean Limit

The purpose of this study was to obtain a detailed comparison of engine performance and exhaust emissions from natural gas and gasoline fuelled spark ignition engines. Each fuel was tested at both wide-open throttle and two part-load operating conditions over a wide range of air—fuel ratios. The results show that the power output of the engine at a given throttle position was reduced by about 12 per cent when fuelled by natural gas due to displacement of air by the gas. The emission levels for natural gas were lower by from 5 to 50 per cent, depending on the pollutant, compared to gasoline. On an energy basis, both fuels exhibited nearly equal thermal efficiency, except that at very lean air—fuel ratios natural gas showed increased efficiency due to an extension of the lean limit of combustion.

scholarly journals Ethanol/Gasoline Blends as Alternative Fuel in Last Generation Spark-Ignition Engines: A Review on CO and HC Engine Out Emissions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4034
Author(s):  
Paolo Iodice ◽  
Massimo Cardone
Keyword(s):  
Physicochemical Properties ◽  
Alternative Fuels ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
The Impact

Among the alternative fuels existing for spark-ignition engines, ethanol is considered worldwide as an important renewable fuel when mixed with pure gasoline because of its favorable physicochemical properties. An in-depth and updated investigation on the issue of CO and HC engine out emissions related to use of ethanol/gasoline fuels in spark-ignition engines is therefore necessary. Starting from our experimental studies on engine out emissions of a last generation spark-ignition engine fueled with ethanol/gasoline fuels, the aim of this new investigation is to offer a complete literature review on the present state of ethanol combustion in last generation spark-ignition engines under real working conditions to clarify the possible change in CO and HC emissions. In the first section of this paper, a comparison between physicochemical properties of ethanol and gasoline is examined to assess the practicability of using ethanol as an alternative fuel for spark-ignition engines and to investigate the effect on engine out emissions and combustion efficiency. In the next section, this article focuses on the impact of ethanol/gasoline fuels on CO and HC formation. Many studies related to combustion characteristics and exhaust emissions in spark-ignition engines fueled with ethanol/gasoline fuels are thus discussed in detail. Most of these experimental investigations conclude that the addition of ethanol with gasoline fuel mixtures can really decrease the CO and HC exhaust emissions of last generation spark-ignition engines in several operating conditions.

Laminar flame speed correlations for methane, ethane, propane and their mixtures, and natural gas and gasoline for spark-ignition engine simulations

2017 ◽  
Vol 18 (9) ◽  
pp. 951-970 ◽  
Author(s):  
Riccardo Amirante ◽  
Elia Distaso ◽  
Paolo Tamburrano ◽  
Rolf D Reitz
Keyword(s):  
Natural Gas ◽  
Laminar Flame ◽  
Spark Ignition ◽  
Flame Speed ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Computational Time ◽  
Laminar Flame Speed ◽  
Spark Ignition Engines ◽  
Empirical Correlations

The laminar flame speed plays an important role in spark-ignition engines, as well as in many other combustion applications, such as in designing burners and predicting explosions. For this reason, it has been object of extensive research. Analytical correlations that allow it to be calculated have been developed and are used in engine simulations. They are usually preferred to detailed chemical kinetic models for saving computational time. Therefore, an accurate as possible formulation for such expressions is needed for successful simulations. However, many previous empirical correlations have been based on a limited set of experimental measurements, which have been often carried out over a limited range of operating conditions. Thus, it can result in low accuracy and usability. In this study, measurements of laminar flame speeds obtained by several workers are collected, compared and critically analyzed with the aim to develop more accurate empirical correlations for laminar flame speeds as a function of equivalence ratio and unburned mixture temperature and pressure over a wide range of operating conditions, namely [Formula: see text], [Formula: see text] and [Formula: see text]. The purpose is to provide simple and workable expressions for modeling the laminar flame speed of practical fuels used in spark-ignition engines. Pure compounds, such as methane and propane and binary mixtures of methane/ethane and methane/propane, as well as more complex fuels including natural gas and gasoline, are considered. A comparison with available empirical correlations in the literature is also provided.

The Potential of a Separated Electric Compound Spark Ignition Engine for Hybrid Vehicle Application

2022 ◽  
Author(s):  
Emiliano Pipitone ◽  
Salvatore Caltabellotta
Keyword(s):  
Internal Combustion Engines ◽  
Ambient Pressure ◽  
Spark Ignition ◽  
Hybrid Vehicle ◽  
Spark Ignition Engine ◽  
Pollutant Emissions ◽  
Exhaust Gas ◽  
Engine Fuel ◽  
Generator Unit ◽  
Overall Efficiency

Abstract In-cylinder expansion of internal combustion engines based on Diesel or Otto cycles cannot be completely brought down to ambient pressure, causing a 20% theoretical energy loss. Several systems have been implemented to recover and use this energy such as turbocharging, turbo-mechanical and turbo-electrical compounding, or the implementation of Miller Cycles. In all these cases however, the amount of energy recovered is limited allowing the engine to reach an overall efficiency incremental improvement between 4% and 9%. Implementing an adequately designed expander-generator unit could efficiently recover the unexpanded exhaust gas energy and improve efficiency. In this work, the application of the expander-generator unit to a hybrid propulsion vehicle is considered, where the onboard energy storage receives power produced by an expander-generator, which could hence be employed for vehicle propulsion through an electric drivetrain. Starting from these considerations, a simple but effective modelling approach is used to evaluate the energetic potential of a spark-ignition engine electrically supercharged and equipped with an exhaust gas expander connected to an electric generator. The overall efficiency was compared to a reference turbocharged engine within a hybrid vehicle architecture. It was found that, if adequately recovered, the unexpanded gas energy could reduce engine fuel consumption and related pollutant emissions by 4% to 12%, depending on overall power output.

Experiments and modeling of a dual-mode, turbulent jet ignition engine

2019 ◽  
Vol 21 (6) ◽  
pp. 966-986 ◽  
Author(s):  
Sedigheh Tolou ◽  
Harold Schock
Keyword(s):  
Experimental Data ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Peak Pressure ◽  
Operating Conditions ◽  
Turbulent Jet ◽  
Engine Fuel ◽  
Main Chamber ◽  
Dual Mode ◽  
Ignition System

The dual-mode, turbulent jet ignition system is a promising combustion technology to achieve high diesel-like thermal efficiency at medium to high loads and potentially exceed diesel efficiency at low-load operating conditions. The dual-mode, turbulent jet ignition systems to date proved a high level of improvement in thermal efficiency compared to conventional internal combustion engines. However, some questions were still unanswered. The most frequent question regarded power requirements for delivering air to the pre-chamber of a dual-mode, turbulent jet ignition system. In addition, there was no study available to predict the expected efficiency of a dual-mode, turbulent jet ignition engine in a multi-cylinder configuration. This study, for the first time, predicts the ancillary work requirement to operate the dual-mode, turbulent jet ignition system. It also presents a novel, reduced order, and physics-based model of the dual-mode, turbulent jet ignition engine with a pre-chamber valve assembly. The developed model was calibrated based on experimental data from the Prototype II dual-mode, turbulent jet ignition engine. The simulation results were in good agreement with the experimental data. The validity of the model was observed based on the standard metric of the coefficient of determination as well as comparison plots for in-cylinder pressures. Numerical predictions were compared to experiments for three metrics of main chamber combustion: gross indicated mean effective pressure, main chamber peak pressure, and main chamber phasing for the peak pressure. Predictions were within 5% of experimental data, with one exception of 6%. In addition, the absolute root mean square errors of in-cylinder pressures for both pre- and main-combustion chambers were below 0.35. The calibrated model was further studied to introduce a predictive and generalized model for dual-mode, turbulent jet ignition engines. Such a model can project engine behavior in a multi-cylinder configuration over the entire engine fuel map.

Sign in / Sign up

Export Citation Format

Share Document