scholarly journals ANATOMY AND DRYING OF WOOD OF FOUR SPECIES FROM AN AGROFORESTRY SYSTEM

FLORESTA ◽  
2021 ◽  
Vol 51 (4) ◽  
pp. 910
Author(s):  
Elder Eloy ◽  
Rômulo Trevisan ◽  
Tainara Dos Santos Piecha ◽  
Magda Rosa Fontoura ◽  
Henrique Webber Dalla Costa ◽  
...  
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Fiber Diameter ◽  
Pearson Correlation ◽  
Agroforestry System ◽  
Wood Products ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Study Region ◽  
Schizolobium Parahyba

Drying is an important process in the generation of wood products, as it increases the quality of the final products; however, it is influenced by various anatomical characteristics. The aim of this study was to evaluate the influence of anatomy on the drying of wood of Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis W. Hill × Eucalyptus urophylla S.T. Blake (hybrid), and Schizolobium parahyba (Vell.) Blake trees from an agroforestry system. Three trees aged 9 years were sampled for each species. The trees were removed from the study region when their diameter at breast height (DBH) was 1.30 m from the ground. Blocks were made with dimensions of 5.0 × 5.0 × 15.0 cm for the evaluation of oven drying and 1.5 × 1.5 × 2.0 cm for anatomical features. S. parahyba has the highest value of fiber diameter (35.1 µm) and lumen diameter (27.6 µm), whereas P. dubium had the highest value of cell wall thickness (6.8 µm). The average equilibrium moisture content was 10.98% after 40 days of drying. The anatomy of the wood influenced the drying of the four species intensity, which was related to humidity during all periods. The anatomical parameters that most influenced drying were fiber diameter (Pearson correlation coefficient: 0.77), lumen diameter (0.76), and fiber cell wall thickness (0.73); the higher the values, the greater was the drying intensity.

scholarly journals Evaluation of physical, anatomical, and biometric characteristics of Citrus sinensis trees in longitudinal and transverse axes of stem

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 5696-5709
Author(s):  
Ali Hassanpoor Tichi ◽  
Habibollah Khademieslam ◽  
Mojtaba Rezanezhad Divkolae
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Citrus Sinensis ◽  
Fiber Length ◽  
Fiber Diameter ◽  
Basic Density ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Dry Density ◽  
Significant Difference

Three healthy Citrus sinensis (orange) trees in Babol, Iran, were randomly selected and cut. Two discs of 5 cm thickness were prepared along the tree (breast height and crown). In the transverse direction, the test specimens were cut 2 × 2 cm to 3 cm from the pith to the bark sequentially and examined. The biometric and physical properties were measured, and microscopic sections of wood near the bark were studied using light microscopy according to the International Association of Wood Anatomists’ (IAWA) List. Anatomical examination of the C. sinensis wood showed that the species was a diffuse porous hardwood, with indistinct growth rings, simple perforation plates, alternate intervessel pits, and banded parenchyma. The basic density and oven-dry density increased from the pith towards the tree bark and from the bottom of the tree towards the crown. There was a significant difference in both the transverse and longitudinal directions of the C. sinensis tree in terms of fiber length, fiber lumen diameter, fiber diameter, and cell wall thickness. The mean fiber length, fiber diameter, fiber lumen diameter, and cell wall thickness were 0.76 mm, 23.64 µm, 9.23 µm, and 14.41 µm, respectively.

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Gliricidia Sepium ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia sepium is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G. sepium at three intervals according to age groups ( three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years ofage as compared to five (0.41) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Full Potential ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia septum is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G.sepium at three intervals according to age groups (three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years of age as compared to five (0.4 I) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively,, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

Effect of Growth Rate on Fibre Characteristics in Norway Spruce (Picea abies (L.) Karst.)

Holzforschung ◽  
2002 ◽  
Vol 56 (5) ◽  
pp. 449-460 ◽  
Author(s):  
H. Mäkinen ◽  
P. Saranpää ◽  
S. Linder
Keyword(s):  
Growth Rate ◽  
Cell Wall ◽  
Norway Spruce ◽  
Wall Thickness ◽  
Fibre Length ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Breast Height ◽  
And Control ◽  
Fibre Characteristics

Summary To study the effect of growth rate on fibre characteristics and their variations in Norway spruce, trees were sampled in a nutrient optimisation experiment in northern Sweden. Data was collected from 24 trees (40 years old) from fertilised and control plots after 12 years of annual nutrient application, as well as from older trees outside the experimental area. Fibre length, fibre diameter, cell wall thickness, lumen diameter and cell wall percentage were measured from every third annual ring at breast height and at a height of 4 m. Fibre properties, as well as their standard deviation, were closely related to ring number and distance from the pith. Intra-ring variation of fibre characteristics was high compared to their variation between trees. Fertilisation reduced fibre length and cell wall thickness, but increased fibre and lumen diameter in rings of the same age. The difference in fibre width, cell wall thickness and lumen diameter between fertilised and control trees was less apparent, but a greater difference in fibre length was found between the treatments with regard to distance from the pith. There was a similar effect of fertilisation on fibre properties in early- and latewood. The effect of enhanced growth rate was less pronounced at a height of 4 m (near the pith) than at breast height (in older rings). It was demonstrated that it is possible to model intra-tree variability of fibre characteristics using ring width and cambial age as independent variables. Models presented are, however, limited by the relatively young age of the sample trees used.

Effects of thinning and fertilisation on tracheid dimensions and lignin content of Norway spruce

Holzforschung ◽  
2007 ◽  
Vol 61 (3) ◽  
pp. 301-310 ◽  
Author(s):  
Tuula Jaakkola ◽  
Harri Mäkinen ◽  
Pekka Saranpää
Keyword(s):  
Cell Wall ◽  
Norway Spruce ◽  
Wall Thickness ◽  
Lignin Content ◽  
Block Design ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Commercial Thinning ◽  
Tracheid Length ◽  
Treatment Onset

Abstract The effects of the intensity and timing of commercial thinning and fertilisation on tracheid properties and lignin content of Norway spruce [Picea abies (L.) Karst] were studied in two long-term fertilisation-thinning experiments in central and eastern Finland. The experiments consisted of three thinning and three fertilisation treatments in a randomised block design. Fertilisation levels were: unfertilised (F 0), 150 kg N ha-1 (F 1), and 300 kg N ha-1 (F 2). Thinning treatments were: delayed first thinning (T 0), normal thinning (T 1), and intensive first thinning (T 2). A total of 85 trees were sampled 26 years after treatment onset. Tracheid length was measured for 24 trees and cell wall thickness and lumen diameter for 16 trees grown under treatments F 0 T 0, F 0 T 2, F 1 T 0, and F 1 T 2. Lignin content was determined for all trees sampled (n=85) grown in all the different treatment combinations. We found only small differences in tracheid length (0–6%), cell wall thickness (1–17%) and lumen diameter (0–9%), depending on the different fertilisation and thinning conditions. We also found only slightly (1–2%) higher lignin content for fertilised (F 1 and F 2) than for unfertilised (F 0 ) trees (25.8% and 26.0% vs. 25.4%). Trees yielded 26.0% lignin content after intensive first thinning (T 2), 25.9% following normal thinning (T 1), and 25.4% after delayed first thinning (T 0). Thus, the prevailing fertilisation and thinning practice for Norway spruce stands in Finland may not cause essential changes in tracheid properties and lignin content.

scholarly journals Effects of altitude on density and biometric properties of hornbeam wood (Carpinus betulus)

2019 ◽  
Vol 28 (2) ◽  
pp. e011 ◽  
Author(s):  
Majid Kiaei ◽  
Valiullah Moosavi ◽  
Seyed Eshagh Ebadi
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Fiber Length ◽  
Fiber Diameter ◽  
Tree Height ◽  
Wood Properties ◽  
Cell Wall Thickness ◽  
Dry Density ◽  
Carpinus Betulus ◽  
Fiber Dimensions

Aim of the study: This study aimed to investigate the effect of altitude difference on the wood dry density, fiber dimensions, and morphological properties of hornbeam wood (Carpinus betulus L.).Area of study: The study area was located in the province of Mazandaran, north of Iran.Material and method: 18 mature trees were randomly selected and harvested at six altitude levels (300, 500, 700, 900, 1100, and 1300 m) in the north of Iran. The clear test samples‎ were prepared‎ at diameter at breast height (DBH) to measure the wood dry density, fiber length, fiber diameter, cell wall thickness, Runkel coefficients, flexibility coefficients, and slenderness coefficients. Further ‎analyses included the relationships between the wood properties and site conditions (temperature, ‎precipitation, crown canopy, ‎and understory herb layer) as well as tree’s main dimensions ‎(tree height and the DBH).Main results: The results indicated significant effects of altitude variations on the studied ‎properties. The pattern variations of wood properties were very regular at different levels of height. The average fiber length and fiber diameter decreased while the wood dry density and cell wall thickness increased with increasing the altitude levels. The average values of wood dry density, fiber length, fiber diameter, cell wall thickness, slenderness coefficients, flexibility coefficients, and Runkel coefficients of hornbeam wood were 698 kg/m3, 1.42mm, 25.58 µm, 5.72µm, 55.55, 54.04%, and 0.93, respectively, in the above six altitudes. Pearson matrix correlation showed that there were significant relationships between temperature, crown canopy, tree height and DBH ‎with the studied wood properties (except the slenderness coefficients)‎.Research highlights: The hornbeams grown at altitudes above 900-1300 m were not suitable for pulp and ‎paper production‎ due to relatively higher Runkel coefficients, the lower flexibility coefficients, as well as smaller fiber length than other altitude levels.Additional Keywords: Carpinus betulus; altitude variation; density; fiber dimensions; morphological properties.Abbreviations used: WDD (wood dry density); FL (fiber length); FD (fiber diameter), CWT (cell wall thickness); FC (flexibility coefficient); RC (Runkel coefficients); SC (slenderness coefficient).

Does thinning intensity affect the tracheid dimensions of Norway spruce?

2005 ◽  
Vol 35 (11) ◽  
pp. 2685-2697 ◽  
Author(s):  
Tuula Jaakkola ◽  
Harri Mäkinen ◽  
Matti-P Sarén ◽  
Pekka Saranpää
Keyword(s):  
Growth Rate ◽  
Cell Wall ◽  
Norway Spruce ◽  
Wall Thickness ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Stand Age ◽  
Average Cell ◽  
Thinning Intensity ◽  
Forestry Practice

The effect of thinning intensity on the growth rate and tracheid dimensions of Norway spruce (Picea abies (L.) Karst) was studied in two long-term thinning experiments (Heinola and Punkaharju) in southeastern Finland. The stand age was 86 and 67 years in Heinola and Punkaharju, respectively. Thinning intensities in this study were lower and higher than recommended in the 1960s for forestry practice in Finland. An increase in tree growth rate (31% in Heinola and 37% in Punkaharju) caused by the high thinning intensity resulted in slightly shorter tracheids (9% in Heinola and 4% in Punkaharju) than with the low thinning intensity. Increased growth rate had no pronounced effect on tracheid cell wall thickness and lumen diameter. A faster growth rate slightly decreased the average cell wall thickness of an annual ring, but the changes in average lumen diameter were small. The effect of thinning intensity was similar in earlywood and latewood. Variation in fiber properties between and within individual trees and annual rings was large. In conclusion, the current thinning intensities used in Finnish forestry practice enhance growth rate but have a rather small effect on tracheid dimensions.

Characterization of microstructures of SAN foam core using micro-computed tomography

2021 ◽  
pp. 026248932110068
Author(s):  
Youming Chen ◽  
Raj Das ◽  
Hui Wang ◽  
Mark Battley
Keyword(s):  
Cell Wall ◽  
Cell Size ◽  
Wall Thickness ◽  
Strain Localization ◽  
Cell Wall Thickness ◽  
Micro Computed Tomography ◽  
Average Cell Size ◽  
Average Cell ◽  
3D Images ◽  
Compressive Tests

In this study, the microstructure of a SAN foam was imaged using a micro-CT scanner. Through image processing and analysis, variations in density, cell wall thickness and cell size in the foam were quantitatively explored. It is found that cells in the foam are not elongated in the thickness (or rise) direction of foam sheets, but rather equiaxed. Cell walls in the foam are significantly straight. Density, cell size and cell wall thickness all vary along the thickness direction of foam sheets. The low density in the vicinity of one face of foam sheets leads to low compressive stiffness and strength, resulting in the strain localization observed in our previous compressive tests. For M80, large open cells on the top face of foam sheets are likely to buckle in compressive tests, therefore being another potential contributor to the strain localization as well. The average cell wall thickness measured from 2D slice images is around 1.4 times that measured from 3D images, and the average cell size measured from 2D slice images is about 13.8% smaller than that measured from 3D images. The dispersions of cell wall thickness measured from 2D slice images are 1.16–1.20 times those measured from 3D images. The dispersions of cell size measured from 2D slice images are 1.12–1.36 times those measured from 3D images.

Summer temperature in northeastern Siberia since 1642 reconstructed from tracheid dimensions and cell numbers of Larix cajanderi

2003 ◽  
Vol 33 (10) ◽  
pp. 1905-1914 ◽  
Author(s):  
Irina P Panyushkina ◽  
Malcolm K Hughes ◽  
Eugene A Vaganov ◽  
Martin AR Munro
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Cell Number ◽  
Cell Wall Thickness ◽  
Cell Dimension ◽  
Cell Numbers ◽  
Age Related ◽  
Cambial Age ◽  
Northeastern Siberia ◽  
Larix Cajanderi

We reconstructed air temperature for two periods in the growth season from cell dimension and cell number variability in cross-dated tree rings of Larix cajanderi Mayr. from northeastern Siberia. Thirteen tree-ring chronologies based on cell size, cell wall thickness, and cell number were developed for AD 1642–1993. No clear evidence was found of an age-related trend in cell dimensions in the sampled materials, but cell numbers were correlated with cambial age. The chronologies contain strong temperature signals associated with the timing of xylem growth. We obtained reliable reconstructions of mean June temperature from the total cell number and July–September temperature from the cell wall thickness of latewood. June temperature and July–September temperature covaried for most of the period from AD 1642 to AD 1978. After that time, June temperature became cooler relative to July–September temperature. This difference caused disproportional changes in earlywood tracheids because of the late start of growth and cool conditions in June followed by warming during the rest of the season. The identification of this unusual recent change has shown that intraseasonal resolution may be achieved by cell dimension and cell number chronologies.

Sign in / Sign up

Export Citation Format

Share Document