scholarly journals WOOD VOLUMETRY OF Tachigali vulgaris PURE PLANTATIONS IN DIFFERENT PLANTING SPACINGS

FLORESTA ◽  
2021 ◽  
Vol 51 (4) ◽  
pp. 990
Author(s):  
Larissa De Oliveira Ramos ◽  
Rodrigo Otávio Veiga de Miranda ◽  
Alvaro Augusto Vieira Soares ◽  
Thiago De Paula Protásio ◽  
Delman De Almeida Gonçalves
Keyword(s):  
Equivalent Diameter ◽  
Maximum Percentage ◽  
Diameter At Breast Height ◽  
Independent Variables ◽  
Breast Height ◽  
Volumetric Models ◽  
Volumetric Model ◽  
Identity Test ◽  
Volume Estimates ◽  
Production Accuracy

The aim of this study was to develop volumetric equations for tachi-branco trees (Tachigali vulgaris L. G. Silva & H. C. Lima), by assessing the effect of initial planting spacing in volume estimates, as well as developing an equation to estimate the equivalent diameter (deq). Data are from an experiment located in north Pará. The experiment was conducted with the randomized blocks design, being three blocks with six treatments each. The most used volumetric models were assessed for two distinct situations: considering each trunk as a tree and using the tree deq as independent variables in the volumetric model. The need for individual equations for initial planting spacing was tested. In addition, an equation for deq estimate was proposed. The use of deq provided more precise and accurate volumetric estimates regarding diameter at breast height. Among the models tested, the Schumacher-Hall model was selected. Through the model identity test, the equation  can be used to estimate tree volume of Tachigali vulgaris, regardless of planting spacing. The equivalent diameter can be estimated via equation from minimum and maximum diameters of tree trunks. The maximum percentage differences of volume by hectare obtained with the measurement of all trunks and deq were only 5% without loss in production accuracy per unit of area

scholarly journals An Evaluation of Selection for Volume Growth in Loblolly Pine

2008 ◽  
Vol 57 (1-6) ◽  
pp. 22-28 ◽  
Author(s):  
J. R. Sherrill ◽  
T. J. Mullin ◽  
B. P. Bullock ◽  
S. E. Mckeand ◽  
R. C. Purnell ◽  
...  
Keyword(s):  
Loblolly Pine ◽  
Selection Criterion ◽  
Direct Determination ◽  
Stem Volume ◽  
Bark Thickness ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Taper ◽  
Selection For ◽  
Volume Estimates

Abstract Total inside-bark volume is the most important selection criterion for productivity in tree breeding programs in the Southeastern U.S. Tree breeders typically estimate total inside-bark volume based on outside-bark diameter at breast height and total height without accounting for stem taper or bark thickness. To make a direct determination of total inside- and outside-bark volume, a loblolly pine (Pinus taeda L.) open-pollinated family trial replicated with cultural treatments of weed control and fertilization was measured. This direct measurement was compared to typical volume estimates. In this trial, approximately 40 individuals from each of 25 open-pollinated first- and second-generation families were destructively sampled in the 13th growing season. Selection for volume using a combined-variable (diameter2 * height) equation was found to be highly effective for making volume gain. There was a high correlation between estimated and directly-measured total inside-bark volumes (0.99). Bark thickness and stem taper had low importance for stem volume selection. There was a positive genetic correlation between bark thickness and diameter at breast height (0.66). This indicates that selection for larger diameters may produce individuals with thicker bark, which may eventually affect total inside-bark volume estimates.

scholarly journals Estimation of Genetic Parameters and Wood Yield Selection Index in a Clonal Trial of Korean Pine (Pinus koraiensis) in Northeastern China

2021 ◽  
Vol 13 (8) ◽  
pp. 4167
Author(s):  
David Kombi Kaviriri ◽  
Huan-Zhen Liu ◽  
Xi-Yang Zhao
Keyword(s):  
Selection Index ◽  
Tree Height ◽  
Stem Volume ◽  
Korean Pine ◽  
Branch Number ◽  
Basal Diameter ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Straightness ◽  
Clonal Trial

In order to determine suitable traits for selecting high-wood-yield Korean pine materials, eleven morphological characteristics (tree height, basal diameter, diameter at breast height, diameter at 3 meter height, stem straightness degree, crown breadth, crown height, branch angle, branch number per node, bark thickness, and stem volume) were investigated in a 38-year-old Korean pine clonal trial at Naozhi orchard. A statistical approach combining variance and regression analysis was used to extract appropriate traits for selecting elite clones. Results of variance analysis showed significant difference in variance sources in most of the traits, except for the stem straightness degree, which had a p-value of 0.94. Moderate to high coefficients of variation and clonal repeatability ranged from 10.73% to 35.45% and from 0.06% to 0.78%, respectively. Strong significant correlations on the phenotypic and genotypic levels were observed between the straightness traits and tree volume, but crown breadth was weakly correlated to the volume. Four principal components retaining up to 80% of the total variation were extracted, and stem volume, basal diameter, diameter at breast height, diameter at 3 meter height, tree height, and crown height displayed high correlation to these components (r ranged from 0.76 to 0.98). Based on the Type III sum of squares, tree height, diameter at breast height, and branch number showed significant information to explain the clonal variability based on stem volume. Using the extracted characteristics as the selection index, six clones (PK105, PK59, PK104, PK36, PK28, and K101) displayed the highest Qi values, with a selection rate of 5% corresponding to the genetic gain of 42.96% in stem volume. This study provides beneficial information for the selection of multiple traits for genetically improved genotypes of Korean pine.

scholarly journals Seemingly Unrelated Mixed-Effects Biomass Models for Black Locust in West Poland

Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 380
Author(s):  
Karol Bronisz ◽  
Szymon Bijak ◽  
Rafał Wojtan ◽  
Robert Tomusiak ◽  
Agnieszka Bronisz ◽  
...  
Keyword(s):  
Black Locust ◽  
Random Effect ◽  
Tree Height ◽  
Cross Model ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Dependent Variables ◽  
Dry Biomass ◽  
Biomass Components ◽  
Independent Variable

Information about tree biomass is important not only in the assessment of wood resources but also in the process of preparing forest management plans, as well as for estimating carbon stocks and their flow in forest ecosystems. The study aimed to develop empirical models for determining the dry mass of the aboveground parts of black locust trees and their components (stem, branches, and leaves). The research was carried out based on data collected in 13 stands (a total of 38 sample trees) of black locust located in western Poland. The model system was developed based on multivariate mixed-effect models using two approaches. In the first approach, biomass components and tree height were defined as dependent variables, while diameter at breast height was used as an independent variable. In the second approach, biomass components and diameter at breast height were dependent variables and tree height was defined as the independent variable. Both approaches enable the fixed-effect and cross-model random-effect prediction of aboveground dry biomass components of black locust. Cross-model random-effect prediction was obtained using additional measurements of two extreme trees, defined as trees characterized by the smallest and largest diameter at breast height in sample plot. This type of prediction is more precise (root mean square error for stem dry biomass for both approaches equals 77.603 and 188.139, respectively) than that of fixed-effects prediction (root mean square error for stem dry biomass for both approaches equals 238.716 and 206.933, respectively). The use of height as an independent variable increases the possibility of the practical application of the proposed solutions using remote data sources.

Calotropis procera (apple of sodom).

2021 ◽  
Author(s):  
Julissa Rojas-Sandoval ◽  
Pedro Acevedo-Rodríguez
Keyword(s):  
Sand Dunes ◽  
Fibre Production ◽  
Calotropis Procera ◽  
Desert Grassland ◽  
Evergreen Shrub ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Shifting Sand ◽  
Pale Green

Abstract C. procera is a fleshy evergreen shrub about 1.8-5.5 m tall, with a diameter at breast height of 15-20 cm (von Maydell, 1986). The flowers are pale green to white, with purple tips. A fibre obtained from the bark is used to make lines, bow-strings and twine; it can also be spun with cotton, or used to stuff mattresses and pillows. The fibre is strengthened by soaking in water for 1-2 days, but extensive soaking may reduce durability. The wood is of small dimensions and is too light for most uses. C. procera produces a distinctive white latex, which contains cardiotoxins and hydrocarbons with many medicinal and pesticidal properties. C. procera has been widely planted for fibre production and has become naturalized on the American and Australian continents. It is often abundant on degraded areas and is an indicator of overgrazing. C. procera is a widespread pioneer in semi-desert grassland and bushland (e.g. in Africa), and it also colonizes shifting sand-dunes such as in Rajasthan, India. However, due to its properties as a pioneer, there is a risk that this species may become a weed. More research is needed on C. procera to maximize production and marketing of its many potential products.

Yield and diametric structure of Dimorphandra mollis Benth

2021 ◽  
Vol 51 ◽  
Author(s):  
Karoline Paulino Costa ◽  
Messulan Rodrigues Meira ◽  
Silma Leite Rocha ◽  
Thaíse Ohana Moura Fernandes ◽  
Ernane Ronie Martins
Keyword(s):  
Environmental Protection ◽  
Social Economic ◽  
Average Diameter ◽  
Brazilian Savanna ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Minas Gerais State ◽  
Environmental Protection Area ◽  
Protection Area ◽  
Environmental Importance

ABSTRACT Dimorphandra mollis is native to the Brazilian Savanna and has social, economic and environmental importance. This study aimed to evaluate the yield and diametric distribution of Dimorphandra mollis Benth. in the Pandeiros River Environmental Protection Area, in Bonito de Minas, Minas Gerais state, Brazil. Five areas were assessed, totaling five hectares (50 plots of 1,000 m2). The total number of plants, yield per plant (2018, 2019 and 2020) and diameter at breast height were recorded, considering all trees from the plots in diametric classes. The average diameter at breast height of all plants was 6.05 ± 3.07 cm, and that of the plants that produced in at least one of the evaluated years was 7.46 ± 3.15 cm. The diametric distribution showed classes with no individuals, indicating imbalance, as well as a trend to inverted “J” shape. The maximum annual yield was 8.08 kg ha-1 of dry fruits (2019), the minimum 0.42 kg ha-1 (2018), and the average 2.74 kg ha-1, with biennial characteristic.

scholarly journals PRESERVATION OF PRIMARY FOREST CHARACTERISTICS DESPITE FRAGMENTATION AND ISOLATION IN A FOREST REMNANT FROM VIÇOSA, MG, BRAZIL1

2015 ◽  
Vol 39 (6) ◽  
pp. 985-994 ◽  
Author(s):  
Markus Gastauer ◽  
Marcos Eduardo Guerra Sobral ◽  
João Augusto Alves Meira-Neto
Keyword(s):  
Species Richness ◽  
Endemic Species ◽  
Tree Species ◽  
Primary Forest ◽  
Forest Patch ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Forest Remnant ◽  
Primary Forests ◽  
Biotic Resources

According to its owners, the Forest of Seu Nico (FSN) from the Viçosa municipality, Minas Gerais, Brazil, never has been logged and is therefore considered a primary forest. Nevertheless, the forest patch suffered impacts due to selective wood and non-timber extraction, fragmentation and isolation. Aim of this study was to test if the FSN, despite impacts, preserved characteristics of primary forests, which are elevated percentages of non-pioneer (>90%), animal-dispersed (>80 %), understory (>50%) and endemic species (~40%). For that, all trees with diameter at breast height equal or major than 3.2 cm within a plot of 100 x 100 m were identified. With 218 tree species found within this hectare, the FSN's species richness is outstanding for the region. The percentages of non-pioneer (92 %), animal-dispersed (85 %), understory (55 %) and endemic species (39.2 %) from the FSN fulfill the criteria proposed for primary forest. Therefore, we conclude that the FSN maintained its characteristics as a primary forest which highlights its importance for the conservation of biotic resources in the region, where similar fragments are lacking or not described yet.

scholarly journals Genetic diversity in Australian Cedar genotypes selected by mixed models

2012 ◽  
Vol 36 (2) ◽  
pp. 171-179 ◽  
Author(s):  
Rulfe Tavares ◽  
Alexandre Pio Viana ◽  
Deborah Guerra Barroso ◽  
Antonio Teixeira do Amaral Júnior
Keyword(s):  
Genetic Diversity ◽  
Mixed Models ◽  
Forest Products ◽  
Raw Material ◽  
Morphological Data ◽  
Technical Improvement ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Toona Ciliata ◽  
Increasing Demand

The increasing demand for raw material for multiple uses of forest products and by-products has attracted the interest for fast growing species, such as the Australian Cedar (Toona ciliata), which presents high productive and economic potential. The present work aimed at estimating genetic diversity by DNA markers and morphological traits supported for the mixed models. The following traits were measured and genotypes were sampled randomly in different areas: diameter at breast height, height, cylindrical volume, diameter, distance between nodes and crown diameter. Twelve RAPD primers were used and generated a total of 91 marks, 82 of which were polymorphic. The high percentage of polymorphic markers, 90.10%, demonstrated that discrimination in this species is efficient, but it yet little studied, for this case we can find the extent of the genetic basis for the application of technical improvement. The assessment of genetic diversity by the UPGMA method using the binary and morphological data provided the expression of genetic dissimilarities among the accessions evaluated, optimizing the perception of this divergence. The use of mixed models was efficient to assess combined genetic diversity to optimize the selection of genotypes with divergent genetic values for diameter at breast height.

scholarly journals Field Evaluation of Populus deltoides Bartr. ex Marsh. at Two Sites in Indo-gangetic Plains of India

2010 ◽  
Vol 59 (1-6) ◽  
pp. 1-7 ◽  
Author(s):  
G. P. S. Dhillon ◽  
Avtar Singh ◽  
Pritpal Singh ◽  
D. S. Sidhu
Keyword(s):  
Populus Deltoides ◽  
Growth Traits ◽  
Tree Height ◽  
Field Evaluation ◽  
Site Conditions ◽  
Genetic Advance ◽  
Gangetic Plains ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Northwestern India

Abstract Results from clonal trials of Populus deltoides conducted in two distinct agroclimatic regions of Punjab in northwestern India are reported and discussed. Sixteen clones were evaluated at Hambran and Bathinda where commonly grown clone ‘G-48’ was considered as control. Significant differences among clones (P < 0.001) were observed for diameter at breast height (DBH), tree height and volume at the age of four and six years under both the site conditions. Clone ‘L-48’ ranked first for volume at six year age at both sites and was followed by clone ‘Ranikhet’. The respective superiority for volume of these clones over control was 44.8 and 23.2 per cent at Hambran and 72.5 and 30.7 per cent at Bathinda. All growth traits registered significantly higher values at Hambran in comparison to those at Bathinda. Clone x site interaction was also significant (P < 0.001). The clones ‘L-168’, ‘154/86’, ‘Solan-z’ and ‘170/88’ experienced huge fluctuation in ranking between sites for volume at 6-year age. The DBH and height showed significant and positive correlation with each other and with tree volume at all the age combinations. The clonal mean heritability was quite high both at Hambran (0.73-0.86) and Bathinda (0.80-0.95). The genetic advance were the highest for volume (33.34-64.26%) and the lowest (10.65-22.79%) in case of height.

scholarly journals Tending operation model for red oak stands

2017 ◽  
pp. 133-136
Author(s):  
Károly Rédei ◽  
Zsolt Keserű ◽  
Imre Csiha ◽  
János Rásó ◽  
Csaba Kovács ◽  
...  
Keyword(s):  
Quercus Rubra ◽  
Regulation System ◽  
Red Oak ◽  
Operation Model ◽  
Stem Number ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Relationship Of ◽  
Native Literature

Red oak (Quercus rubra L.) is our most important exotic oak species, that possesses growing culture with almost one hundred years in our country. Plantation character of red oak growing predominates principally by applied regeneration method (mostly artificial), regular planting space, applying defined method and planting space regulation system. Forest tending model for red oak, that considered stopgap in the native literature is intended to serving the latter. Especially important equation in the viewpoint of stand growing, that describes relationship of stem number (N, in hectare) and diameter at breast height (D1.3 in cm) is: N=e9.80220-1.12607lnD1.3.

Sign in / Sign up

Export Citation Format

Share Document