scholarly journals PEMERIKSAAN DNA SENTUHAN DARI BARANG BUKTI DENGAN PERBEDAAN JENIS BAHAN

2021 ◽  
Vol 1 (3) ◽  
pp. 1-7
Author(s):  
Vira Saamia ◽  
I MADE WIRANATHA ◽  
Irfan Rofik ◽  
Setia betaria Aritonang ◽  
Dwi Ana Oktaviani

Analysis of Touch DNA on forensic laboratory has been a favorite approach to identify a person. Every investigator demand the identity of whom the perpetrator that commit the crime, that leaved their DNA on the evidence. Many factors affect touch DNA, one of these is the substrate of the evidence. Common evidences that often examined in forensic lab are firearms, knife, swords, clothes, and switch bomb. To collect the cell on the evidence we use tapelift method using the duct tape. PrepFilerTM BTA Extraction Kit used to extract the DNA from the duct tape, followed by Quantifiler® Duo. For profiling the DNA we use GlobalFilerTM and fragment analyzed on ABI 3500 Genetic Analyzer followed by GeneMapper ID.X. V.1.4. Based on our analysis, DNA from fabric substrate has the higher percentage of success DNA profiling. The success DNA profiling rate of fabric and plastic substrate is 100%, and 0% for wood substrate. According to recent researches, smooth substrate, like plastic and glass, has higher percentage to get full profile than rough substrate, like woods. But on the fabric, they found has much higher percentage than smooth substrate. This can be due to the absorption ability of the fabric to obtain more cells

2014 ◽  
Vol 54 (5) ◽  
pp. 369-372 ◽  
Author(s):  
Filip Van Nieuwerburgh ◽  
David Van Hoofstat ◽  
Christophe Van Neste ◽  
Dieter Deforce

2020 ◽  
Vol 16 (3) ◽  
pp. 341-348
Author(s):  
Surinya Traipop ◽  
Suchada Chuanuwatanakul ◽  
Orawon Chailapakul ◽  
Eakkasit Punrat

Background: Recently, Derris scandens, a Thai herbal medicine with anti-inflammatory activity, is widely used as beverage and supplementary food. When the traditional medicine is a choice for health therapy, the simple and reliable equipment is required to control the suitable consuming amount of the active component. Objective: To develop the electrochemical sensor for genistein determination in Derris scandens with high sensitivity and rapid operation. Methods: An in-house screen-printed electrochemical sensor consisting of a three-electrode system was developed for genistein determination. A silver/silver chloride (Ag/AgCl) reference electrode, a carbon counter electrode and a carbon working electrode were prepared on a 0.3-mm-thick plastic substrate by the screen-printing technique using conductive ink. The dimensions of each sensor were 2.5×1.0 cm. Only 50 µL of sample solution was required on this device for the determination of genistein concentration by rapid response square wave voltammetry. Results: The oxidation peak of genistein appeared with good response in acidic media at a peak potential of 0.6 V. Moreover, the signal was enhanced by modifying the conductive carbon ink with cobalt( II) phthalocyanine. Under the optimized conditions, the linear range was found to be 2.5-150 µM and the detection limit was 1.5 µM. Moreover, the small volume extraction was successfully developed without any further pre-concentration. This proposed method was applied to determine genistein in Derris scandens with satisfying results. Conclusion: The proposed method is promising as an alternative method for genistein determination with facile and fast analysis.


Author(s):  
Jessica Champion ◽  
Piyamas Kanokwongnuwut ◽  
Roland A. H. Oorschot ◽  
Duncan Taylor ◽  
Adrian Linacre
Keyword(s):  

Holzforschung ◽  
2012 ◽  
Vol 66 (8) ◽  
pp. 927-934 ◽  
Author(s):  
Noridah B. Osman ◽  
Armando G. McDonald ◽  
Marie-Pierre G. Laborie

Abstract The effects of thermal compression on the organic-soluble material of a uniform wood substrate, hybrid poplar (clone OP-367), has been studied. Poplar veneers were preconditioned to 0% or 8% moisture content and subsequently hot pressed at 150°C, 200°C, and 250°C. The dichloromethane (DCM) extracts were characterized by various hyphenated analyses [gas chromatography-mass spectrometry (GC-MS), analytical pyrolysis (Py-GC-MS), electrospray ionization-mass spectrometry (ESI-MS), and gel permeation chromatography (GPC)]. The yields and composition of extractable compounds were markedly influenced by treatment at 250°C compared to those obtained at lower temperatures. Most importantly, the organic extracts contained a significant portion of lignin-derived compounds after treatment at 250°C.


Author(s):  
Yinon Harush‐Brosh ◽  
Yael Levy‐Herman ◽  
Ravell Bengiat ◽  
Carla Oz ◽  
Michal Levin‐Elad ◽  
...  
Keyword(s):  

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1465
Author(s):  
Chao Shen ◽  
Liuyan Huang ◽  
Guangwu Xie ◽  
Yulai Wang ◽  
Zongkai Ma ◽  
...  

Increasing discharge of plastic debris into aquatic ecosystems and the worsening ecological risks have received growing attention. Once released, plastic debris could serve as a new substrate for microbes in waters. The complex relationship between plastics and biofilms has aroused great interest. To confirm the hypothesis that the presence of plastic in water affects the composition of biofilm in natural state, in situ biofilm culture experiments were conducted in a lake for 40 days. The diversity of biofilm attached on natural (cobble stones (CS) and wood) and plastic substrates (Polyethylene terephthalate (PET) and Polymethyl methacrylate (PMMA)) were compared, and the community structure and composition were also analyzed. Results from high-throughput sequencing of 16S rRNA showed that the diversity and species richness of biofilm bacterial communities on natural substrate (observed species of 1353~1945, Simpson index of 0.977~0.989 and Shannon–Wiener diversity index of 7.42~8.60) were much higher than those on plastic substrates (observed species of 900~1146, Simpson index of 0.914~0.975 and Shannon–Wiener diversity index of 5.47~6.99). The NMDS analyses were used to confirm the taxonomic significance between different samples, and Anosim (p = 0.001, R = 0.892) and Adonis (p = 0.001, R = 808, F = 11.19) demonstrated that this classification was statistically rigorous. Different dominant bacterial communities were found on plastic and natural substrates. Alphaproteobacterial, Betaproteobacteria and Synechococcophycideae dominated on the plastic substrate, while Gammaproteobacteria, Phycisphaerae and Planctomycetia played the main role on the natural substrates. The bacterial community structure of the two substrates also showed significant difference which is consistent with previous studies using other polymer types. Our results shed light on the fact that plastic debris can serve as a new habitat for biofilm colonization, unlike natural substrates, pathogens and plastic-degrading microorganisms selectively attached to plastic substrates, which affected the bacterial community structure and composition in aquatic environment. This study provided a new insight into understanding the potential impacts of plastics serving as a new habitat for microbial communities in freshwater environments. Future research should focus on the potential impacts of plastic-attached biofilms in various aquatic environments and the whole life cycle of plastics (i.e., from plastic fragments to microplastics) and also microbial flock characteristics using microbial plastics in the natural environment should also be addressed.


Sign in / Sign up

Export Citation Format

Share Document