scholarly journals THE RELATIONSHIP BETWEEN THE LENGTH OF PRODUCTIVE LIFE AND THE BODY CONFORMATION TRAITS IN COWS

2011 ◽  
Vol 12 (2) ◽  
pp. 239-254 ◽  
Author(s):  
Peter Strapák ◽  
PETER JUHÁS ◽  
Eva Strapáková
Author(s):  
Eva Strapáková ◽  
Peter Strapák ◽  
Juraj Candrák ◽  
Ivan Pavlík ◽  
Katarína Dočkalová

The goal of the work was to discover the influence of conformation traits evaluated by the Fleckscore system on the length of productive life of Slovak Simmental dairy cows. Evaluation of body conformation traits according to the Fleckscore system was performed on 3 452 cows. The relationship of individual traits to longevity was analysed using the Weibull proportional hazard model. The results confirmed that smaller and longer cows, which were well muscular and with a deeper body, had a lower risk of early culling than cows in the reference group. Hock angularity, pastern and hoof height scored with low or high marks were associated with an early culling of cows. In terms of the length of productive life, a slightly more elastic pattern is required. Cows with a deeper udder and a stronger and tighter fore udder attachment, which were also average in notching and height central ligament and centrally placed teats, reached a longer productive life.  


2010 ◽  
Vol 53 (4) ◽  
pp. 393-402
Author(s):  
P. Strapák ◽  
P. Juhás ◽  
E. Strapáková ◽  
M. Halo

Abstract. Data obtained from the evaluation of longevity in 118 646 dairy cows of the Slovak Simmental breed were analyzed. The average length of productive life reached 1 451 days (3.88 years). Based on the analysis of the length of productive life for the whole cattle population, we calculated the ratio of cows that reached more than 12, 24, 36, 48, 60, 72 and 84 months respectively. The most important effects were the sire (F=53.43, P<0.001) and the farm effect (F=26.32, P<0.001). The milk production at first lactation was an important factor, too. The effects of conformation traits on the length of productive life were analyzed in a group of 6 585 culled cows. From the main conformation traits the most important effects were recorded for body frame, udder, feet and legs. For a detailed evaluation, the level of the effects of a particular body conformation trait were tested. The most important effects were rump angle, croup height and body depth. The analysis of udder traits showed that the most important effects were udder depth, teats length, rear udder attachment and rear udder. From the feet and legs traits the most important effects were recorded for fetlock, foot and rear legs.


2005 ◽  
Vol 21 (5-6) ◽  
pp. 53-59 ◽  
Author(s):  
Peter Strapák ◽  
P. Juhás ◽  
V. Canji

nema


2013 ◽  
Vol 56 (1) ◽  
pp. 127-136 ◽  
Author(s):  
M. Kaproń ◽  
E. Czerniak ◽  
M. Łukaszewicz ◽  
A. Danielewicz

Abstract. The study covered 11 376 horses registered in the six successive volumes of the Wielkopolski Herdbook. The level of variability in the body conformation indices and in the performance value indices was analysed. The genetic basis parameters for the body conformation and performance traits of the Wielkopolski horses were assessed. A high level of heritability was identified for the wither height (h2 = 0.566) and cannon circumference (h2 = 0.418), with an average heritability level of the other analysed characteristics (ranging from h2 = 0.205 – for the stallion performance test results to h2 = 0.350 – in the case of chest circumference). On the other hand, genetic correlation between the analysed indices produced the highest values for the relationship between wither height and cannon (rG = 0.636) and chest (rG = 0.551) circumference, as well as for the interrelation between the above dimensions and the following body structure indices: »boniness« (rG = 0.690) and »bulkiness« (rG = 0.541). Considering the extensive scope of the study – and the fact that the breed population was registered in the Wielkopolski Herdbook – the authors suggested the advisability of using the results of the present study for the modification of breeding programs with a view to improve the breed in question, both its principal population and the one included in the program of gene-pool protection.


Author(s):  
Shirazu I. ◽  
Theophilus. A. Sackey ◽  
Elvis K. Tiburu ◽  
Mensah Y. B. ◽  
Forson A.

The relationship between body height and body weight has been described by using various terms. Notable among them is the body mass index, body surface area, body shape index and body surface index. In clinical setting the first descriptive parameter is the BMI scale, which provides information about whether an individual body weight is proportionate to the body height. Since the development of BMI, two other body parameters have been developed in an attempt to determine the relationship between body height and weight. These are the body surface area (BSA) and body surface index (BSI). Generally, these body parameters are described as clinical health indicators that described how healthy an individual body response to the other internal organs. The aim of the study is to discuss the use of BSI as a better clinical health indicator for preclinical assessment of body-organ/tissue relationship. Hence organ health condition as against other body composition. In addition the study is `also to determine the best body parameter the best predict other parameters for clinical application. The model parameters are presented as; modeled height and weight; modelled BSI and BSA, BSI and BMI and modeled BSA and BMI. The models are presented as clinical application software for comfortable working process and designed as GUI and CAD for use in clinical application.


2020 ◽  
Vol 17 (1) ◽  
pp. 59
Author(s):  
Ching Ching Wong

Enterprise Risk Management (ERM) is an effective technique in managing risk within an organization strategically and holistically. Risk culture relates to the general awareness, attitudes and behaviours towards risk management in an organisation. This paper presents a conceptual model that shows the relationship between risk culture and ERM implementation. The dependent variable is ERM implementation, which is measured by the four processes namely risk identification and risk assessment; risk treatment; monitor and consult; communicate and consult. The independent variables under risk culture are risk policy and risk appetite; key risk indicators; accountability; incentives; risk language and internal relationships. This study aims to empirically test the relationship between risk culture and ERM implementation among Malaysian construction public listed companies. Risk culture is expected to have direct effects and significantly influence ERM. This study contributes to enhance the body of knowledge in ERM especially in understanding significant of risk culture that influence its’ implementation from Malaysian perspective.


Author(s):  
Mohamed Ahmed Darwish Abdulla Larii ◽  
◽  
Fatma Ahmed Lari ◽  
Mohamed Ahmed Darwish Abdulla Lari ◽  
◽  
...  

This study intends to find out the mediating effect of organisational culture on the relationship between information system and sustainable performance of manufacturing sector in UAE. This study used AMOS-SEM software to develop mediation model that linking the mediating relationships between Information System, Organisational Culture and Sustainable operation Performance. Data was collected through questionnaire survey among the operation staff of Abu Dhabi manufacturing companies. A total 250 questionnaires were distributed however 205 were returned and only 200 are valid which indicates a response rate of 80%. The analysis found that TPS has positive but not significant effect to SP; OIS has positive but not significant effect to SP; FMW has a positive and significant effect on SP; SDS has a negative and not significant effect to SP and SP has positive but not significant effect OC. For the path relationship between the four exogenous variables (TPS, OIS, SDS, and FMW) and the mediator variable (OC), the results are TPS has positive and significant effect to OC; OIS has positive but not significant effect to OC; FMW has positive and significant effect to OC and SDS has positive and not significant effect to OC. Collectively, the five exogenous constructs (TPS, OIS, SDS, FMW and OC) explained 89% variation in operational performance and 86% of the variation in organisational culture. However, for a mediator, it was found that OC has no significant mediating effect on the relationship between TPS and SP; OC has no significant mediating effect on the relationship between OIS and SP; OC has no significant mediating effect on the relationship between SDS and SP and OC has no significant mediating effect on the relationship between FMW and SP. it can be concluded that there is a positive relationship between information system dimensions and operational performance. However organizational culture has no contributing any mediating effect to the relationship. These findings have contributed to the body of knowledge and could be shared among the UAE manufacturing practitioners.


Author(s):  
Aleksandra Rakhmanova ◽  
Georgiy Loginov ◽  
Vladimir Dolich ◽  
Nataliya Komleva ◽  
Galina Rakhmanova

The relevance of the article is determined by the existence of contradictions between the need to introduce innovative technologies into the educational process at school, as an integral attribute of modern education, and the negative influence of factors on the physical and psycho-emotional state of health of students related to the use of information and communication tools (computers, phones, headphones). The goal of the study was to assess the relationship between the timing of the use of information and communication tools and the frequency of functional and psycho-emotional complaints in groups of middle and high school schoolchildren. 400 schoolchildren of the Saratov Region, the Moscow Region, Leningrad Region and the Republic of Dagestan were surveyed, who made up two groups of research: middle-school schoolchildren (grades 5–6) and high-school schoolchildren (grades 10–11 The survey was carried out by means of the standardized formalized cards which included the questions considering usage time of computers and mobile phones, complaints to a headache, hands pain, other pain and/or feeling of discomfort from visual organ and the organs of hearing, as well as a psycho-emotional state. Statistical analysis of the data was performed using the STATISTICA application software program by StatSoft Inc (USA). To compare the frequencies of a binary feature, a fourfold table of absolute frequencies was constructed and the level of statistical significance for the exact Fisher’s two-tailed test criterion was determined. The study was conducted according to the requirements of bioethics, after signing informed consent statement by teenagers and their parents. The study examined the relationship between the timing of the use of information and communication tools and the frequency of complaints in groups of schoolchildren. The results of the study should be taken into account when developing and implementing preventive measures to prevent negative effects of computers and mobile devices on the body of students.


Author(s):  
M.P. Sutunkova ◽  
B.A. Katsnelson ◽  
L.I. Privalova ◽  
S.N. Solovjeva ◽  
V.B. Gurvich ◽  
...  

We conducted a comparative assessment of the nickel oxide nanoparticles toxicity (NiO) of two sizes (11 and 25 nm) according to a number of indicators of the body state after repeated intraperitoneal injections of these particles suspensions. At equal mass doses, NiO nanoparticles have been found to cause various manifestations of systemic subchronic toxicity with a particularly pronounced effect on liver, kidney function, the body’s antioxidant system, lipid metabolism, white and red blood, redox metabolism, spleen damage, and some disorders of nervous activity allegedly related to the possibility of nickel penetration into the brain from the blood. The relationship between the diameter and toxicity of particles is ambiguous, which may be due to differences in toxicokinetics, which is controlled by both physiological mechanisms and direct penetration of nanoparticles through biological barriers and, finally, unequal solubility.


2019 ◽  
pp. 3-13
Author(s):  
Alexandru Cîtea ◽  
George-Sebastian Iacob

Posture is commonly perceived as the relationship between the segments of the human body upright. Certain parts of the body such as the cephalic extremity, neck, torso, upper and lower limbs are involved in the final posture of the body. Musculoskeletal instabilities and reduced postural control lead to the installation of nonstructural posture deviations in all 3 anatomical planes. When we talk about the sagittal plane, it was concluded that there are 4 main types of posture deviation: hyperlordotic posture, kyphotic posture, rectitude and "sway-back" posture.Pilates method has become in the last decade a much more popular formof exercise used in rehabilitation. The Pilates method is frequently prescribed to people with low back pain due to their orientation on the stabilizing muscles of the pelvis. Pilates exercise is thus theorized to help reactivate the muscles and, by doingso, increases lumbar support, reduces pain, and improves body alignment.


Sign in / Sign up

Export Citation Format

Share Document