scholarly journals Comparing the effect of Reciproc R25 rotary file system on the amount of apical extrusion of debris via using it with different reciprocal angles

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 63-66
Author(s):  
Nezif Çelik ◽  
Sadullah Kaya ◽  
Özkan Adıgüzel
Keyword(s):  
File System ◽  
Native Speakers ◽  
Single Root ◽  
Apical Extrusion ◽  
Working Length ◽  
Significant Difference ◽  
Native Speakers Of English ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Aim: To compare the amount of apically extruded debris using Reciproc (R25) file with different reciprocal angles. Methodology: In this research, 60 extracted mandibular premolars with a single root, a single canal, and a single apical foramen were used. Specimens, the working length of which was determined by a stainless steel 10-K file, were randomly distributed into three experimental groups (n = 20) as follows: Group 1 150° counterclockwise (CCW)-30° clockwise (CW); Group 2 180° CCW-60° CW; and Group 3 210° CCW-90° CW. For the irrigation, 10 mL of distilled water was administered via syringe pump. The extruded debris was collected into Eppendorf tubes tared in advance. The distribution of data was analyzed using a Shapiro-Wilk test. A Kruskal-Wallis H test was used for statistical analysis. The null hypothesis is no significant difference between the groups in terms of the amount of apical extrusion of debris. Results: There was no statistically significant difference between the groups with regard to amount of apical extrusion of debris (p>0.05). Nevertheless, the highest average amount of extrusion of debris was detected in group 1, and the lowest in group 3. Conclusion: According to the results of this study, different reciprocal angles during chemomechanical preparation has no significant effect on the amount of apical extrusion of debris.   How to cite this article: Çelik N, Kaya S, Adıgüzel Ö. Comparing the effect of Reciproc R25 rotary file system on the amount of apical extrusion of debris via using it with different reciprocal angles. Int Dent Res 2021;11(Suppl.1):63-6. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.10   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Apical extrusion of debris by manual and mechanical instrumentation

2007 ◽  
Vol 18 (1) ◽  
pp. 16-19 ◽  
Author(s):  
Lilia E. Leonardi ◽  
Diana M. Atlas ◽  
Guillermo Raiden
Keyword(s):  
Root Canal ◽  
Significance Level ◽  
Root Canals ◽  
Group 4 ◽  
Apical Extrusion ◽  
Working Length ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

The aim of the present study was to assess the presence of apically extruded debris and evaluate the influence of canal curvature on the amount of debris produced by manual and mechanical techniques. Forty single-rooted mature teeth with 15 to 30 degree of root canal curvature were selected. The presence of only one foramen was confirmed using a magnifying lens. A size 15 K-file was placed up to the apical foramen to determine the patency. Working length was determined with the same instrument, 1 mm short of the foramen. According to the employed technique, the groups were labeled as follows: Group 1 - Manual instrumentation with Mor-flex files; Group 2 - Mechanical instrumentation with Cursor and Mor-flex files; Group 3 - Manual instrumentation with Flexi-cut files; Group 4 - Mechanical instrumentation with Cursor and Flexi-cut files. During instrumentation, the root canals were irrigated with 20 mL. Debris extruded through the apical foramen was collected using the Myers and Montgomery technique. The values (in mg) were: Group 1: 0.422 ± 0.683; Group 2: 0.688 ± 0.795; Group 3: 0.409 ± 0.323; Group 4: 0.810 ± 0.708. Data were analyzed statistically by ANOVA at 5% significance level. There was no statistically significant difference among the groups (p<0.05). No statistically significant differences were found between slight and moderate curvatures in terms of the amount of extruded debris (p>0.05).

scholarly journals Comparison of cyclic fatigue of a reciprocating file system at different angles of rotation

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 67-73
Author(s):  
Ahmet Akay ◽  
Özkan Adıgüzel ◽  
Seda Erkan Akay ◽  
Sadullah Kaya
Keyword(s):  
Analysis Of Variance ◽  
Fatigue Resistance ◽  
File System ◽  
Cyclic Fatigue ◽  
Curvature Radius ◽  
Two Samples ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Aim: The purpose of this in vitro study is to compare the cyclic fatigue resistance of Reciproc Nickel-Titanium (Ni-Ti) rotary files while operating root canals using in three different reciprocal angles. Methodology: Forty-five pieces of Reciproc R25 canal files were tested using artificial canals with a 60° angle of curvature, 5 mm curvature radius, and 1.5 mm diameter carved into a stainless steel block. The Ni-Ti files were checked with a stereomicroscope and then randomly separated into 3 groups. Group 1 consisted of reciprocal angles CCW 150°–CW 30°, Group 2 consisted of CCW 180°–CW 60°, and Group 3 consisted of CCW 210°–CW 90°. The duration of the cyclic fatigue being measured, elapsed time until a file fractured was determined with a chronometer. The lengths of the fractured pieces were measured with a digital caliper. After the cyclic fatigue test, two samples from each group were examined with a Scanning Electron Microscope (SEM) to determine the signs of cyclic fatigue. Results: One-way analysis of variance (ANOVA) was applied to the normally distributed groups (p<0,05). Since there was a significant statistical difference of file’s cyclic fatigue resistance (p=0,001) between the groups, Tukey’s honestly significant difference (HSD) post-hoc pairwise comparison test were used for determine to between which groups. While there were statistically significant differences between Group 1 and Group 2 (p=0,001), and between Group 1 and Group 3 (p=0,001), there was no significant difference between Group 2 and Group 3 (p=0,376). Group 1 displayed the highest resistance to cyclic fatigue. There were no statistically significant differences between the lengths of the fractured files within the three groups according to the one-way analysis of variance (p=0,847). Conclusion: In our study, it was observed that the reciprocal angles of CCW 150°–CW 30°, which were also suggested by the file manufacturer firms, had the highest fracture resistance against cyclic fatigue.   How to cite this article: Akay A, Adıgüzel Ö, Erkan Akay S, Kaya S. Comparison of cyclic fatigue of a reciprocating file system at different angles of rotation. Int Dent Res 2021;11(Suppl.1):67-72. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.11   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.  

scholarly journals Apical Extrusion of Debris during Root Canal Preparation with ProTaper Next, WaveOne Gold and Twisted Files

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6254
Author(s):  
Wojciech Eliasz ◽  
Beata Czarnecka ◽  
Anna Surdacka
Keyword(s):  
Root Canal ◽  
Root Canal Preparation ◽  
Movement Kinematics ◽  
Liquid Component ◽  
Apical Extrusion ◽  
Working Length ◽  
Adaptive Motion ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

(1) Background: Apical extrusion of debris is an example of a complication that may arise during root canal treatment, and it has been proven to be an unavoidable occurrence during endodontic treatment by numerous authors. Even though it may not hinder the long-term outcome of treatment, it may lead directly to increased levels of postoperative pain and, therefore, lower levels of patient acceptance and satisfaction. The aim of the study was to assess the weight of apically extruded debris during root canal preparation with instruments that use different movement kinematics (rotary, reciprocating, and adaptive motion); (2) Methods: The study was performed using the Myers and Montgomery model. Sixty human premolar teeth were inserted into preweighed Eppendorf tubes and randomly classified into three groups. After manual glide-path preparation, teeth in each group were instrumented to working length set 1 mm short of the anatomical apex using the standard sequence provided by the manufacturers (for Group 1: ProTaper Next X1 & X2; for Group 2: WaveOne Gold Primary, for Group 3: Twisted Files SM1-SM3). Root canals were irrigated with 1 mL of 0.9% NaCl solution between each file insertion. The tubes with collected debris were stored in an incubator at 70 °C for 5 days in order to evaporate the liquid component. Measurement of the weight of extruded debris was performed by subtracting the preinstrumentation from the postinstrumentation weight of the tubes. The results were analyzed with Kruskal–Wallis ANOVA, with significance level set at 0.05; (3) Results: The weight of extruded debris was 0.337 mg (SD = 0.148) for Group 1, 0.305 mg (SD = 0.201) for Group 2, and 0.348 mg (SD = 0.135) for Group 3. (4) Conclusions: Engine-driven root canal preparation with the use of instruments ProTaper Next, WaveOne Gold and Twisted Files that use different movement kinematics (rotary, reciprocating, and adaptive motion) was associated with apical extrusion of debris to a similar extent.

scholarly journals Evaluation of apical debris extrusion during root canal preparation using Hand K file, Revo S, Protaper Next and Wave One file system: An in vitro study.

2020 ◽  
Vol 6 (2) ◽  
pp. 16-21
Author(s):  
Mohd Salman Akhtar ◽  
Ankit Agarwal ◽  
Mohammed Ayaz Malick ◽  
Sheeba Khan ◽  
Sachin Yadav ◽  
...  
Keyword(s):  
Root Canal ◽  
File System ◽  
Root Canal Preparation ◽  
Group 4 ◽  
Apical Extrusion ◽  
Intergroup Comparison ◽  
Significant Difference ◽  
Final Weight ◽  
Group 3 ◽  
Group 2

Introduction: The key step during the root canal treatment is the biomechanical preparation of the infected root canals. This preparation may result in pushing the apical debris through the apical foramen into the periapical space leading to initiation of immunological response by the host leading to postoperative pain and discomfort. Therefore the aim of the study was to compare the apical debris extrusion during root canal preparation using Hand k file, Revo S, Protaper Next and Wave One file system.    Materials and Method: Sixty extracted human mandibular premolars with single canal were selected and randomly divided into four groups (n = 15) for instrumentation with four different files. Group 1: Hand k file, Group 2: Revo S file, Group 3: ProTaper Next, and Group 4: WaveOne single reciprocating file. Debris extruding during instrumentation were collected into pre-weighed Eppendorf tubes. These tubes were then stored in an incubator at 70°C for 5 days and were then weighed to obtain the final weight, with the extruded debris. Weight of extruded debris was calculated by subtracting the initial weight from the final weight. Statistical analysis was performed using one-way analysis of variance and post hoc Tukey’s test. Result: For intergroup comparison, significant differences were found for the debris extruded. Instrumentation with hand K files resulted in significantly more debris extrusion apically as compared to other three NiTi groups. Maximum debris extrusion was seen by Hand K file, followed by group 2(Revo S), then group 4(Wave One) and least by group 3(Protaper Next). However, there was no significant difference in debris extrusion amongst groups prepared with either NiTi rotary or reciprocating file systems. Conclusion: The Pro Taper Next resulted in least debris extrusion when compared to Hand k file, reciprocating Wave One and rotary Revo S. However there was not a significant difference between all the NiTi rotary and reciprocating file system. Keywords: Apical extrusion debris; Hand k file, instrumentation; ProTaper Next, RevoS and WaveOne.

In-vivo evaluation of the effect of cyanoacrylate on prosthetic vascular graft infection – does cyanoacrylate increase the severity of infection?

VASA ◽  
2020 ◽  
Vol 49 (4) ◽  
pp. 281-284
Author(s):  
Atıf Yolgosteren ◽  
Gencehan Kumtepe ◽  
Melda Payaslioglu ◽  
Cuneyt Ozakin
Keyword(s):  
Vascular Graft ◽  
Graft Infection ◽  
Vascular Graft Infection ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Prosthetic Vascular Graft Infection ◽  
Group 1

Summary. Background: Prosthetic vascular graft infection (PVGI) is a complication with high mortality. Cyanoacrylate (CA) is an adhesive which has been used in a number of surgical procedures. In this in-vivo study, we aimed to evaluate the relationship between PVGI and CA. Materials and methods: Thirty-two rats were equally divided into four groups. Pouch was formed on back of rats until deep fascia. In group 1, vascular graft with polyethyleneterephthalate (PET) was placed into pouch. In group 2, MRSA strain with a density of 1 ml 0.5 MacFarland was injected into pouch. In group 3, 1 cm 2 vascular graft with PET piece was placed into pouch and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. In group 4, 1 cm 2 vascular graft with PET piece impregnated with N-butyl cyanoacrylate-based adhesive was placed and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. All rats were scarified in 96th hour, culture samples were taken where intervention was performed and were evaluated microbiologically. Bacteria reproducing in each group were numerically evaluated based on colony-forming unit (CFU/ml) and compared by taking their average. Results: MRSA reproduction of 0 CFU/ml in group 1, of 1410 CFU/ml in group 2, of 180 200 CFU/ml in group 3 and of 625 300 CFU/ml in group 4 was present. A statistically significant difference was present between group 1 and group 4 (p < 0.01), between group 2 and group 4 (p < 0.01), between group 3 and group 4 (p < 0.05). In terms of reproduction, no statistically significant difference was found in group 1, group 2, group 3 in themselves. Conclusions: We observed that the rate of infection increased in the cyanoacyrylate group where cyanoacrylate was used. We think that surgeon should be more careful in using CA in vascular surgery.

scholarly journals Isometric Handgrip Exercise Training Improves Spirometric Parameters and Pulmonary Capacity

2021 ◽  
Vol 28 (3) ◽  
pp. 328-338
Author(s):  
Ogbutor Udoji Godsday ◽  
Nwangwa Eze Kingsley ◽  
Nwogueze Bartholomew Chukwuebuka ◽  
Chukwuemeka Ephraim ◽  
Ezunu Emmanuel ◽  
...  
Keyword(s):  
Pulmonary Function ◽  
Isometric Exercise ◽  
Handgrip Exercise ◽  
Isometric Handgrip ◽  
Post Exercise ◽  
Significant Difference ◽  
Isometric Handgrip Exercise ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Decline in normal physiological pulmonary function has been attributed to premorbid conditions such as prehypertension. Research evidence suggests that physical activity reduces age-related decline in pulmonary function and improves the efficiency of the lungs in prehypertensive patients. However, there is a scarcity of data evidence relating to isometric exercise and pulmonary function. Furthermore, the interrelationship between the intensity and duration of isometric exercise and pulmonary function in these patients is still uncertain. Therefore, this study was undertaken to investigate the effect of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. To determine the effectiveness of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. A quasi experiment using a pre- and post-exercise method was carried out in two out-patients hospital settings. The sample comprised 192 sedentary pre-hypertensive subjects, aged between 30–50 years, that were randomly distributed into three groups of 64 participants each. The subjects performed, for 24 consecutive days, an isometric handgrip exercise at 30% Maximum Voluntary Contraction (M.V.C.). At the end of the 24 days, group one (GP1) discontinued, while group two (GP2) continued the exercise protocol for another 24 consecutive days and group three (GP3) continued with the exercise protocol for another 24 consecutive days but at 50% M.V.C. Determinants of lung function (outcomes) were Forced Expiratory Volume in 1 s (FEV1), Forced Vital Capacity (FVC), FEV1/FVC Ratio and Peak Expiratory Flow Rate (PEFR). The study shows that there was no statistically significant difference in the pre- and post-exercise outcomes for FEV1, FVC, FEV1/FVC Ratio and PEFR after 24 days for group 1. In group 2, there was a statistically significant difference in the FVC [(mean = 0.12 ± 0.12), (p = 0.002)], FEV1 [(mean = 0.15 ± 0.17), (p = 0.003)] and PEF [(mean = 0.85 ± 0.35), (p = 0.001)] after 48 days. In group 3, there was a statistically significant difference (p = 0.001) in all the outcomes assessed after 48 days. There was a between groups difference in favour of group 2 compared with group 1 for outcomes of FEV1 [(mean = 0.142 ± 0.68), (p = 0.005)] and PEF [(mean = 0.83 ± 0.19), (p = 0.0031)]. There was statistically significant difference in favour of group 3 compared to group 2, by increasing the exercise intensity from 30% to 50% M.V.C., for outcomes of FVC [mean change = 0.10 ± 0.052), (p = 0.005)], FEV1/FVC [mean change = 3.18 ± 0.75), (p = 0.017)] and PEF [(mean change = 0.86 ± 0.35), (p = 0.001)] after 48 days. Isometric handgrip exercise (after 48 days at 30% to 50% M.V.C.) improves outcomes of pulmonary function capacity in adults with prehypertension. Meanwhile, duration and/or increase in intensity of the isometric effort significantly contributed to the affects attained.

scholarly journals Effects of posterior tibial slope on the mid-term results of medial unicompartmental knee arthroplasty

Arthroplasty ◽  
2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Zhijie Chen ◽  
Kaizhe Chen ◽  
Yufei Yan ◽  
Jianmin Feng ◽  
Yi Wang ◽  
...  
Keyword(s):  
Knee Flexion ◽  
Tibial Slope ◽  
Posterior Tibial ◽  
Significant Difference ◽  
Medial Unicompartmental Knee Arthroplasty ◽  
Group 3 ◽  
Group 2 ◽  
Postoperative Knee ◽  
Group 1

Abstract Objective To evaluate the effect of medial posterior tibial slope (PTS) on mid-term postoperative range of motion (ROM) and functional improvement of the knee after medial unicompartmental knee arthroplasty (UKA). Methods Medical records of 113 patients who had undergone 124 medial UKAs between April 2009 through April 2014 were reviewed retrospectively. The mean follow-up lasted 7.6 years (range, 6.2–11.2 years). Collected were demographic data, including gender, age, height, weight of the patients. Anteroposterior (AP) and lateral knee radiographs of the operated knees were available in all patients. The knee function was evaluated during office follow-up or hospital stay. Meanwhile, postoperative PTS, ROM, maximal knee flexion and Hospital for Special Surgery (HSS) knee score (pre−/postoperative) of the operated side were measured and assessed. According to the size of the PTS, patients were divided into 3 groups: group 1 (<4°), group 2 (4° ~ 7°) and group 3 (>7°). The association between PTS and the knee function was investigated. Results In our cohort, the average PTS was 2.7° ± 0.6° in group 1, 5.6° ± 0.9° in group 2 and 8.7° ± 1.2° in group 3. Pairwise comparisons showed significant differences among them (p < 0.01). The average maximal flexion range of postoperative knees in each group was 112.4° ± 5.6°, 116.4° ± 7.2°, and 117.5° ± 6.1°, respectively, with significant difference found between group 1 and group 2 (p < 0.05), and between group 1 and group 3 (p < 0.05). However, the gender, age, and body mass index (BMI) did not differ between three groups and there was no significant difference between groups in terms of pre−/postoperative HSS scores or postoperative knee ROM. Conclusion A mid-term follow-up showed that an appropriate PTS (4° ~ 7°) can help improve the postoperative flexion of knee. On the other hand, too small a PTS could lead to limited postoperative knee flexion. Therefore, the PTS less than 4° should be avoided during medial UKA.

The Relationship between Serum Ferritin Levels and 5-Year All-Cause Mortality in Hemodialysis Patients

2021 ◽  
pp. 1-7
Author(s):  
Emre Erdem ◽  
Ahmet Karatas ◽  
Tevfik Ecder
Keyword(s):  
Serum Ferritin ◽  
Hemodialysis Patients ◽  
Rank Test ◽  
Significant Difference ◽  
All Cause Mortality ◽  
Group 3 ◽  
Group 2 ◽  
The Relationship ◽  
Group 1

<b><i>Introduction:</i></b> The effect of high serum ferritin levels on long-term mortality in hemodialysis patients is unknown. The relationship between serum ferritin levels and 5-year all-cause mortality in hemodialysis patients was investigated in this study. <b><i>Methods:</i></b> A total of 173 prevalent hemodialysis patients were included in this study. The patients were followed for up to 5 years and divided into 3 groups according to time-averaged serum ferritin levels (group 1: serum ferritin &#x3c;800 ng/mL, group 2: serum ferritin 800–1,500 ng/mL, and group 3: serum ferritin &#x3e;1,500 ng/mL). Along with the serum ferritin levels, other clinical and laboratory variables that may affect mortality were also included in the Cox proportional-hazards regression analysis. <b><i>Results:</i></b> Eighty-one (47%) patients died during the 5-year follow-up period. The median follow-up time was 38 (17.5–60) months. The 5-year survival rates of groups 1, 2, and 3 were 44, 64, and 27%, respectively. In group 3, the survival was lower than in groups 1 and 2 (log-rank test, <i>p</i> = 0.002). In group 1, the mortality was significantly lower than in group 3 (HR [95% CI]: 0.16 [0.05–0.49]; <i>p</i> = 0.001). In group 2, the mortality was also lower than in group 3 (HR [95% CI]: 0.32 [0.12–0.88]; <i>p</i> = 0.026). No significant difference in mortality between groups 1 and 2 was found (HR [95% CI]: 0.49 [0.23–1.04]; <i>p</i> = 0.063). <b><i>Conclusion:</i></b> Time-averaged serum ferritin levels &#x3e;1,500 ng/mL in hemodialysis patients are associated with an increased 5-year all-cause mortality risk.

scholarly journals Different lead locations guided by fluoroscopy and ECG parameters and their effect on patients functional status

2019 ◽  
Vol 71 (1) ◽  
Author(s):  
Mohamed MesbahTahaHassanin ◽  
Ahmad ShafieAmmar ◽  
Radwa M. Abdullah ◽  
Mohammad Hassan Khedr
Keyword(s):  
Functional Capacity ◽  
Systolic Function ◽  
Left Ventricular ◽  
Left Ventricular Dyssynchrony ◽  
Qrs Complex ◽  
Significant Difference ◽  
Septal Pacing ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Abstract Background Right ventricular apical pacing with the resultant left ventricular dyssynchrony often leads to depressed systolic function and heart failure. This study aimed at investigating the relation between various septal locations guided by ECG and fluoroscopy and the intermediate term functional capacity of the patients. Results Fifty patients who received a single lead pacemaker with assumed > 90% pacemaker dependency. Patients were randomized according to RV pacing site RV into group 1 “high septum” (n = 15), group 2 “mid septum” (n = 25), and group 3 “low septum” (n = 10) using QRS vector and duration as well as fluoroscopic parameters. Their clinical status was assessed 6 months after device implementation using 6-min walk test (6MWT). The study showed that paced QRS complex duration itself has no significant difference between the different septal pacing locations (P-value 0.675), although its combination with the paced QRS complex vector can signify the optimal pacing site and 6MWT showed a significant difference among the groups in favor of group 1; group 1 (413.3 ± 148.5), group 2 (359.8 ± 124.6), and group 3 (276.0 ± 98.5) P value 0.04. Conclusion There was a significant difference found between the three septal pacing sites concerning the patient functional capacity with superiority of high septal location. By contrast, different septal sites showed no significant difference of the paced QRS complex duration. To optimize the pacing site in the septum, assessment of the paced QRS vector in leads I and III is of a great benefit especially when combined with paced QRS complex duration assessment.

scholarly journals Fracture resistance of immature teeth filled with mineral trioxide aggregate, bioaggregate, and biodentine

2016 ◽  
Vol 10 (02) ◽  
pp. 220-224 ◽  
Author(s):  
Emre Bayram ◽  
Huda Melike Bayram
Keyword(s):  
Fracture Resistance ◽  
Mineral Trioxide Aggregate ◽  
Mean Values ◽  
Root Canals ◽  
Immature Teeth ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Post Hoc ◽  
Group 1

ABSTRACT Objective: The purpose of this study was to evaluate fracture resistance of teeth with immature apices treated with coronal placement of mineral trioxide aggregate (MTA), bioaggregate (BA), and Biodentine. Materials and Methods: Forty-one freshly extracted, single-rooted human premolar teeth were used for the study. At first, the root length was standardized to 9 mm. The crown-down technique was used for the preparation of the root canals using the rotary ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland) of F3 (30). Peeso reamer no. 6 was stepped out from the apex to simulate an incompletely formed root. The prepared roots were randomly assigned to one control (n = 5) and three experimental (n = 12) groups, as described below. Group 1: White MTA (Angelus, Londrina, Brazil) was prepared as per the manufacturer's instructions and compacted into the root canal using MAP system (Dentsply Maillefer, Ballaigues, Switzerland) and condensed by pluggers (Angelus, Londrina, Brazil). Group 2: The canals were filled with DiaRoot-BA (DiaDent Group International, Canada). Group 3: Biodentine (Septodont, Saint Maur des Fosses, France) solution was mixed with the capsule powder and condensed using pluggers. Instron was used to determine the maximum horizontal load to fracture the tooth, placing the tip 3 mm incisal to the cementoenamel junction. Mean values of the fracture strength were compared by ANOVA followed by a post hoc test. P < 0.05 was considered statistically significant. Results: No significant difference was observed among the MTA, BA, and biodentine experimental groups. Conclusion: All the three materials tested, may be used as effective strengthening agents for immature teeth.

Sign in / Sign up

Export Citation Format

Share Document