CEMENT PRODUCTION IN RUSSIA: BEST AVAILABLE TECHNIQUES AND OPPORTUNITIES FOR USING ALTERNATIVE FUELS

2019 ◽  
Author(s):  
Irina Tikhonova
Keyword(s):  
Alternative Fuels ◽  
Cement Production ◽  
Best Available Techniques

Carbon Management in an Emissions-Intensive Industry in a Developing Economy: Cement Manufacturing in Indonesia

2018 ◽  
Vol 2 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Togar W. S. Panjaitan ◽  
Paul Dargusch ◽  
Ammar A. Aziz ◽  
David Wadley
Keyword(s):  
Alternative Fuels ◽  
Cement Industry ◽  
Cement Production ◽  
Carbon Management ◽  
Production And Consumption ◽  
Carbon Dioxide Equivalents ◽  
Strategic Position ◽  
Reduce Emissions ◽  
Cement Manufacturing ◽  
Capital Intensive

Around 600 Mt carbon dioxide equivalents (CO2e) of anthropogenic greenhouse gases (GHG) emission originates from energy production and consumption in Indonesia annually. Of this output, 40 Mt CO2e comes from cement production. This makes the cement industry a key sector to target in Indonesia’s quest to reduce its emissions by 26% by 2020. Substantial opportunities exist for the industry to reduce emissions, mainly through clinker substitution, alternative fuels, and the modernization of kiln technologies. However, most of these abatement options are capital intensive and considered as noncore business. Due to this, the private sector is unlikely to voluntarily invest in emission reduction unless it saves money, improves revenue, enhances the strategic position of the firm, or unless governments provide incentives or force adoption through regulatory and policy controls. In this study, we review the profile of the Indonesian cement industry and assess the carbon management and climate policy actions available to reduce emissions. The case highlights opportunities for improved carbon management in emission-intensive industries in developing countries.

scholarly journals Towards the Correct Measurement of Thermal Conductivity of Ionic Melts and Nanofluids

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 99 ◽  
Author(s):  
Carlos A. Nieto de Castro ◽  
Maria José V. Lourenço
Keyword(s):  
Thermal Conductivity ◽  
Ionic Liquids ◽  
Molten Salts ◽  
Alternative Fuels ◽  
The United States ◽  
Design Parameters ◽  
Physical Situation ◽  
The Sustainable Development ◽  
Best Available Techniques ◽  
Energy Field

Thermophysical properties of engineering fluids have proven in the past to be essential for the design of physical and chemical processing and reaction equipment in the chemical, metallurgical, and allied industries, as they influence directly the design parameters and performance of plant units in the of, for example, heat exchangers, distillation columns, phase separation, and reactors. In the energy field, the search for the optimization of existing and alternative fuels, either using neutral or ionic fluids, is an actual research and application topic, both for new applications and the sustainable development of old technologies. One of the most important drawbacks in the industrial use of thermophysical property data is the common discrepancies in available data, measured with different methods, different samples, and questionable quality assessment. Measuring accurately the thermal conductivity of fluids has been a very successful task since the late 1970s due to the efforts of several schools in Europe, Japan, and the United States. However, the application of the most accurate techniques to several systems with technological importance, like ionic liquids, nanofluids, and molten salts, has not been made in the last ten years in a correct fashion, generating highly inaccurate data, which do not reflect the real physical situation. It is the purpose of this paper to review critically the best available techniques for the measurement of thermal conductivity of fluids, with special emphasis on transient methods and their application to ionic liquids, nanofluids, and molten salts.

Co-Processing Hazardous Waste in the Chinese Cement Industry - Status 2014

2015 ◽  
Vol 768 ◽  
pp. 679-686 ◽  
Author(s):  
Juan Xu ◽  
Shao Feng Sun ◽  
Kårehelge Karstensen ◽  
Da Hai Yan ◽  
Zheng Peng
Keyword(s):  
Waste Management ◽  
Hazardous Waste ◽  
Alternative Fuels ◽  
Raw Materials ◽  
Cement Industry ◽  
Waste Generation ◽  
Cement Production ◽  
Management Capacity ◽  
The World

As China develops its economy, hazardous waste generation is expected to increase rapidly. Recovery and recycling, i.e. co-processing of Alternative Fuels and Raw materials (AFRs) and treatment of hazardous waste in energy-and resource-intensive industries such as the cement industry seems to be an supplementary option to conventional technologies which can increase the overall waste management capacity in China significantly. With the largest cement production in the world, the industry can save significant amounts of non-renewable coal and raw materials by substitution with wastes which needs treatment. However, co-processing requires appropriate regulations and policies to support its development and safe and sound implementation.

scholarly journals Metode Menentukan Klor dalam Sludge Oil: Perbandingan Metode Wet dan Metode Jena

2021 ◽  
Vol 10 (1) ◽  
pp. 1-7
Author(s):  
Herliati Rahman ◽  
Akhirudin Salasa
Keyword(s):  
Environmental Sustainability ◽  
Alternative Fuels ◽  
Negative Impact ◽  
Raw Materials ◽  
Cement Industry ◽  
Raw Material ◽  
Chlorine Content ◽  
Cement Production ◽  
Average Accuracy ◽  
The Difference

Currently, the use of alternative fuels and raw materials (AFR) in the cement industry is very attractive. This is driven by demands for environmental sustainability and the efficiency of fuel and raw material costs. One of the materials that can be used as AFR is sludge oil. However, it needs to be ensured that the chlorine content in the sludge oil does not exceed the threshold so that it does not have a negative impact during the cement production process. It is known that if the chlorine content is more than the threshold, it can cause blocking or clogging of the separator and the kiln. This study aims to determine the performance of the Jena Multi EA 4000 instrument in determining the chlorine content in sludge oil quickly and accurately. Analytic Jena Multi EA 4000 is an Atomic Absorption Spectrometers (AAS) instrument that can be used for analysis of samples in the form of solids or slurries containing chlorine. As validation of the resulting analysis, the wet method is used, which as usual, to determine chlorine levels. From the statistic analysis, namely the F-test and T-test, We found that F-count equal to 0.0080 and F-table equal to 4.2839. it shows that F-count < F-table, indicating the difference in the variance of the two methods H0: s12 = s22 is accepted because there is no difference to the variability of these two tests and the value of T-count = -3.9717 and T-table = 2.1788 so that T-count <T-table is accepted because there is no difference in the average accuracy of the two methods H0: M1 = M2.  

Use of waste derived fuels in cement industry: a review

2016 ◽  
Vol 27 (2) ◽  
pp. 178-193 ◽  
Author(s):  
Nickolaos Chatziaras ◽  
Constantinos S. Psomopoulos ◽  
Nickolas J. Themelis
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Fossil Fuel ◽  
Cement Industry ◽  
Wastewater Sludge ◽  
Cement Clinker ◽  
Firing Process ◽  
Cement Production ◽  
Content Type ◽  
Recycled Plastics

Purpose – Cement production has advanced greatly in the last few decades. The traditional fuels used in traditional kilns include coal, oil, petroleum coke, and natural gas. Energy costs and environmental concerns have encouraged cement companies worldwide to evaluate to what extent conventional fuels can be replaced by waste materials, such as waste oils, mixtures of non-recycled plastics and paper, used tires, biomass wastes, and even wastewater sludge. The paper aims to discuss these issues. Design/methodology/approach – The work is based on literature review. Findings – The clinker firing process is well suited for various alternative fuels (AF); the goal is to optimize process control and alternative fuel consumption while maintaining clinker product quality. The potential is enormous since the global cement industry produces about 3.5 billion tons that consume nearly 350 million tons of coal-equivalent fossil and AF. This study has shown that several cement plants have replaced part of the fossil fuel used by AF, such waste recovered fuels. Many years of industrial experience have shown that the use of wastes as AF by cement plants is both ecologically and economically justified. Originality/value – The substitution of fossil fuels by AF in the production of cement clinker is of great importance both for cement producers and for society because it conserves fossil fuel reserves and, in the case of biogenic wastes, reduces greenhouse gas emissions. In addition, the use of AF can help to reduce the costs of cement production.

scholarly journals Recent Progress in Green Cement Technology Utilizing Low-Carbon Emission Fuels and Raw Materials: A Review

2019 ◽  
Vol 11 (2) ◽  
pp. 537 ◽  
Author(s):  
Ali Naqi ◽  
Jeong Jang
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Alternative Fuels ◽  
Raw Materials ◽  
Low Cost ◽  
Cement Industry ◽  
Industrial Wastes ◽  
Low Carbon ◽  
Cement Production ◽  
Cement Manufacturing

The cement industry is facing numerous challenges in the 21st century due to depleting natural fuel resources, shortage of raw materials, exponentially increasing cement demand and climate linked environmental concerns. Every tonne of ordinary Portland cement (OPC) produced releases an equivalent amount of carbon dioxide to the atmosphere. In this regard, cement manufactured from locally available minerals and industrial wastes that can be blended with OPC as substitute, or full replacement with novel clinkers to reduce the energy requirements is strongly desirable. Reduction in energy consumption and carbon emissions during cement manufacturing can be achieved by introducing alternative cements. The potential of alternative cements as a replacement of conventional OPC can only be fully realized through detailed investigation of binder properties with modern technologies. Seven prominent alternative cement types are considered in this study and their current position compared to OPC has been discussed. The study provides a comprehensive analysis of options for future cements, and an up-to-date summary of the different alternative fuels and binders that can be used in cement production to mitigate carbon dioxide emissions. In addition, the practicalities and benefits of producing the low-cost materials to meet the increasing cement demand are discussed.

scholarly journals Parametric Studies of Cement Production Processes

2020 ◽  
Vol 2020 ◽  
pp. 1-17 ◽  
Author(s):  
John P. John
Keyword(s):  
Energy Consumption ◽  
Alternative Fuels ◽  
Cement Industry ◽  
Production Costs ◽  
Cement Clinker ◽  
Cement Production ◽  
Exhaust Gases ◽  
Industrial Sectors ◽  
Study Results ◽  
Parametric Studies

The cement industry is one of the most intensive energy consumers in the industrial sectors. The energy consumption represents 40% to 60% of production cost. Additionally, the cement industry contributes around 5% to 8% of all man-made CO2 emissions. Physiochemical and thermochemical reactions involved in cement kilns are still not well understood because of their complexity. The reactions have a decisive influence on energy consumption, environmental degradation, and the cost of cement production. There are technical difficulties in achieving direct measurements of critical process variables in kiln systems. Furthermore, process simulation is used for design, development, analysis, and optimization of processes, when experimental tests are difficult to conduct. Moreover, there are several models for the purpose of studying the use of alternative fuels, cement clinker burning process, phase chemistry, and physical parameters. Nonetheless, most of them do not address real inefficiency taking place in the processes, equipment, and the overall system. This paper presents parametric study results of the four-stage preheater dry Rotary Kiln System (RKS) with a planetary cooler. The RKS at the Mbeya Cement Company (MCC) in Tanzania is used as a case study. The study investigated the effects of varying the RKS parameters against system behaviour, process operation, environment, and energy consumptions. Necessary data for the modelling of the RKS at the MCC plant were obtained either by daily operational measurements or laboratory analyses. The steady-state simulation model of the RKS was carried out through the Aspen Plus software. The simulation results were successfully validated using real operating data. Predictions from parametric studies suggest that monitoring and regulating exhaust gases could improve combustion efficiency, which, in turn, leads to conserving fuels and lowering production costs. Composition of exhaust gases also depends both on the type of fuel used and the amount of combustion air. The volume of exit flue gases depends on the amount of combustion air and infiltrating air in the RKS. The results obtained from the study suggest a potential of coal saving at a minimum of about ṁcoal=1263 kg·h−1, which approximates to 76,126 tons per year at the current kiln feed of 58,000 kg·h-1. Thus, this translates to a specific energy saving of about 1849.12 kJ·kgcl-1, with relatively higher clinker throughput. In this vein, process modelling provides effective, safe, and economical ways for assessing the performance of the RKS.

Sign in / Sign up

Export Citation Format

Share Document