scholarly journals Numerical Investigation of Hydrodynamics Induced by a Pitched Blade Turbine: Effect of the Shape of Vessel Base

Mechanika ◽  
2019 ◽  
Vol 25 (5) ◽  
pp. 370-376 ◽  
Author(s):  
BELHANAFI Abdelghani
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Turbulent Model ◽  
Stirred Tanks ◽  
Navier Stokes Equation ◽  
Stirred Vessel ◽  
Pitched Blade Turbine ◽  
Hydrodynamic Structure

This paper presents an numerical analysis influence of bottom shape on the hydrodynamic structure for cylindrical stirred vessel with bump. The turbulent flow generated in stirred tanks is numerically predicted by the resolution of the Navier-Stokes equation using standard k-ε turbulent model. Several parameters on the mixture efficiency has been investigated. Particularly, we have studied the bottom shape of the tank, which is the distance between the bump-turbine with down pumping direction  and impeller diameter.  The numerical obtained results of the CFD (computational fluid dynamics) code CFX V13.0 with the MRF (Multi Reference Frame) are presented in order to understand the flow structure. The three components velocity profiles and the turbulent kinetic energy dimensionless distributions obtained at bottom tanks with three different heights are analyzed and discussed. From these results, we can confirm that including a bump at the bottom center of the tank closer to the turbine improves significantly the operating conditions of stirring and mixing. Predictions have been compared with literature data and a satisfactory agreement has been found.

scholarly journals What does computational fluid dynamics tell us about intracranial aneurysms? A meta-analysis and critical review

2019 ◽  
Vol 40 (5) ◽  
pp. 1021-1039 ◽  
Author(s):  
Khalid M Saqr ◽  
Sherif Rashad ◽  
Simon Tupin ◽  
Kuniyasu Niizuma ◽  
Tamer Hassan ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Intracranial Aneurysms ◽  
Meta Analysis ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Fundamental Properties ◽  
Cfd Models ◽  
Computational Fluid Dynamics Cfd ◽  
Supplementary Material

Despite the plethora of published studies on intracranial aneurysms (IAs) hemodynamic using computational fluid dynamics (CFD), limited progress has been made towards understanding the complex physics and biology underlying IA pathophysiology. Guided by 1733 published papers, we review and discuss the contemporary IA hemodynamics paradigm established through two decades of IA CFD simulations. We have traced the historical origins of simplified CFD models which impede the progress of comprehending IA pathology. We also delve into the debate concerning the Newtonian fluid assumption used to represent blood flow computationally. We evidently demonstrate that the Newtonian assumption, used in almost 90% of studies, might be insufficient to describe IA hemodynamics. In addition, some fundamental properties of the Navier–Stokes equation are revisited in supplementary material to highlight some widely spread misconceptions regarding wall shear stress (WSS) and its derivatives. Conclusively, our study draws a roadmap for next-generation IA CFD models to help researchers investigate the pathophysiology of IAs.

scholarly journals Mixing Performance of Counter-Axial Flow Impeller using Computational Fluid Dynamics

2018 ◽  
Vol 8 (02) ◽  
Author(s):  
Ian Torotwa ◽  
Changying Ji
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Axial Flow ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Ansys Fluent ◽  
Rushton Turbine ◽  
Mixing Performance ◽  
Computational Fluid Dynamics Cfd

In this study, turbulent flow fields in a baffled vessel stirred by counter-axial flow impeller have been investigated in comparison to the Rushton turbine. The resultant turbulence was numerically predicted using computational fluid dynamics (CFD). Turbulence models were developed in ANSYS Fluent 18.1 solver using the Navier-Stokes equation with the standard k-ε turbulence model. The Multiple Reference Frame (MRF) approach was used to simulate the impeller action in the vertical and horizontal planes of the stirred fluid volume. Velocity profiles generated from the simulations were used to predict and compare the performance of the two designs. To validate the CFD model, the simulation results were compared with experimental results from existing work and a satisfactory agreement was established. It was concluded that the counter-axial flow impeller could provide better turbulence characteristics that would improve the quality of mixing systems.

scholarly journals Application of non-linear k-e turbulence model in flow simulation over underwater axisymmetric hull at higher angle of attack

2011 ◽  
Vol 8 (2) ◽  
pp. 149-163 ◽  
Author(s):  
R Sakthivel ◽  
S Vengadesan ◽  
S K Bhattacharyya
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Autonomous Underwater Vehicle ◽  
Angle Of Attack ◽  
Cross Flow ◽  
Flow Simulation ◽  
Underwater Vehicle ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Non Linear

This paper addresses the Computational Fluid Dynamics Approach (CFD) to simulate the flow over underwater axisymmetric bodies at higher angle of attacks.  Three Dimensional (3D) flow simulation is carried out over MAYA Autonomous Underwater Vehicle (AUV) at a Reynolds number (Re) of 2.09×106. These 3D flows are complex due to cross flow interaction with hull which produces nonlinearity in the flow. Cross flow interaction between pressure side and suction side is studied in the presence of angle of attack. For the present study standard k-ε model, non-linear k-ε model models of turbulence are used for solving the Reynolds Averaged Navier-Stokes Equation (RANS). The non-linear k-ε turbulence model is validated against DARPA Suboff axisymmetric hull and its applicability for flow simulation over underwater axisymmetric hull is examined. The non-linear k-ε model performs well in 3D complex turbulent flows with flow separation and flow reattachment.  The effect of angle of attack over flow structure, force coefficients and wall related flow variables are discussed in detail. Keywords: Computational Fluid Dynamics (CFD); Autonomous Underwater Vehicle (AUV); Reynolds averaged Navier-Stokes Equation (RANS); non-linear k-ε turbulence modeldoi: http://dx.doi.org/10.3329/jname.v8i2.6984   Journal of Naval Architecture and Marine Engineering 8(2011) 149-163

Numerical analysis of textured piston compression ring conjunction using two-dimensional-computational fluid dynamics and Reynolds methods

2018 ◽  
Vol 232 (11) ◽  
pp. 1467-1485 ◽  
Author(s):  
Chengwei Wen ◽  
Xianghui Meng ◽  
Wenxiang Li
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Reynolds Equation ◽  
Stokes Equations ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Compression Ring ◽  
Dynamics Method

The Reynolds equation, in which some items have been omitted, is a simplified form of the Navier–Stokes equations. When surface texturing exists, it may unreasonably reveal the tribological effects in some cases. In this paper, both the two-dimensional computational fluid dynamics method, which is based on the Navier–Stokes equations, and the corresponding one-dimensional Reynolds method are adopted to analyze the performance of the textured piston compression ring conjunction. To conduct a comparison between these two methods, the modified Elrod algorithm for Jakobsson–Floberg–Olsson cavitation model is chosen to solve the Reynolds equation. The results show that the Reynolds method is somewhat different from the computational fluid dynamics method in the minimum oil film thickness, pressure distribution, and cavitation at given operating conditions. Moreover, for a low ratio of texture depth to length, the Reynolds equation is still suitable to predict the overall effects of the designed groove textures. The simulation results also reveal that it is not always beneficial for the tribological performance and sometimes may increase the total friction force when the ring is textured.

Numerical and Experimental Study of Cooling Fan Noise

2014 ◽  
Vol 592-594 ◽  
pp. 1930-1934
Author(s):  
G.V.R. Seshagiri Rao ◽  
V.V. Subbarao ◽  
C. Prabakara Rao
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Experimental Studies ◽  
Axial Flow ◽  
Field Analysis ◽  
Navier Stokes ◽  
Axial Flow Fan ◽  
Navier Stokes Equation ◽  
Volume Method ◽  
Physical Features

Abstract. This paper presents the results of experimental studies of the noise of marine application pump axial flow fan. Axial flow fan is verified by both geometrical and experimental approaches. This section includes grid system used in geometric simulation, and boundary conditions. In order to know the complicate and complex physical features of an axial flow fan, a commercial computational fluid dynamics code, FLUENT, is utilized to perform the flow field analysis, which solves the Navier–Stokes equation using an amorphous finite volume-method. As a commercial computational fluid dynamics code, FLUENT has been extensively used in many turbo machinery applications. In this paper the noise predicted according to geometrical results will be compare with investigational results.

Numerical Simulation of Muzzle Flow Field of Gun Based on CFD

2013 ◽  
Vol 291-294 ◽  
pp. 1981-1984
Author(s):  
Zhang Xia Guo ◽  
Yu Tian Pan ◽  
Yong Cun Wang ◽  
Hai Yan Zhang
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Stokes Equation ◽  
Wave Structure ◽  
Flow Fields ◽  
Single Equation ◽  
Navier Stokes ◽  
Turbulent Model ◽  
Navier Stokes Equation ◽  
Numerical Simulation Result

Gunpowder was released in an instant when the pill fly out of the shell during the firing, and then formed a complicated flow fields about the muzzle when the gas expanded sharply. Using the 2 d axisymmetric Navier-Stokes equation combined with single equation turbulent model to conduct the numerical simulation of the process of gunpowder gass evacuating out of the shell without muzzle regardless of the pill’s movement. The numerical simulation result was identical with the experimental. Then simulated the evacuating process of gunpowder gass of an artillery with muzzle brake. The result showed complicated wave structure of the flow fields with the muzzle brake and analysed the influence of muzzle brake to the gass flow field distribution.

scholarly journals Computational Analysis to Factor Wind into the Design of an Architectural Environment

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Hassam Nasarullah Chaudhry ◽  
John Kaiser Calautit ◽  
Ben Richard Hughes
Keyword(s):  
Fluid Dynamics ◽  
Power Generation ◽  
Computational Fluid Dynamics ◽  
Three Dimensional ◽  
Numerical Data ◽  
Navier Stokes ◽  
Windward Side ◽  
Average Value ◽  
Continuity Equations ◽  
Prevailing Wind Direction

The effect of wind distribution on the architectural domain of the Bahrain Trade Centre was numerically analysed using computational fluid dynamics (CFD). Using the numerical data, the power generation potential of the building-integrated wind turbines was determined in response to the prevailing wind direction. The three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations along with the momentum and continuity equations were solved for obtaining the velocity and pressure field. Simulating a reference wind speed of 6 m/s, the findings from the study quantified an estimate power generation of 6.4 kW indicating a capacity factor of 2.9% for the benchmark model. At the windward side of the building, it was observed that the layers of turbulence intensified in inverse proportion to the height of the building with an average value of 0.45 J/kg. The air velocity was found to gradually increase in direct proportion to the elevation with the turbine located at higher altitude receiving maximum exposure to incoming wind. This work highlighted the potential of using advanced computational fluid dynamics in order to factor wind into the design of any architectural environment.

Computational Fluid Dynamics Thermohydrodynamic Analysis of Three-Dimensional Sector-Pad Thrust Bearings With Rectangular Dimples

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
C. I. Papadopoulos ◽  
L. Kaiktsis ◽  
M. Fillon
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Carrying Capacity ◽  
Thermal Effects ◽  
Operating Conditions ◽  
Load Carrying Capacity ◽  
Performance Indices ◽  
Thrust Bearings ◽  
Load Carrying ◽  
Texture Design

The paper presents a detailed computational study of flow patterns and performance indices in a dimpled parallel thrust bearing. The bearing consists of eight pads; the stator surface of each pad is partially textured with rectangular dimples, aiming at maximizing the load carrying capacity. The bearing tribological performance is characterized by means of computational fluid dynamics (CFD) simulations, based on the numerical solution of the Navier–Stokes and energy equations for incompressible flow. Realistic boundary conditions are implemented. The effects of operating conditions and texture design are studied for the case of isothermal flow. First, for a reference texture pattern, the effects of varying operating conditions, in particular minimum film thickness (thrust load), rotational speed and feeding oil pressure are investigated. Next, the effects of varying texture geometry characteristics, in particular texture zone circumferential/radial extent, dimple depth, and texture density on the bearing performance indices (load carrying capacity, friction torque, and friction coefficient) are studied, for a representative operating point. For the reference texture design, the effects of varying operating conditions are further investigated, by also taking into account thermal effects. In particular, adiabatic conditions and conjugate heat transfer at the bearing pad are considered. The results of the present study indicate that parallel thrust bearings textured by proper rectangular dimples are characterized by substantial load carrying capacity levels. Thermal effects may significantly reduce load capacity, especially in the range of high speeds and high loads. Based on the present results, favorable texture designs can be assessed.

Sign in / Sign up

Export Citation Format

Share Document