Physical and chemical properties of cream multistep modes of ripening and fermentations are investigation and their role in the production of sour-cream butter is studied. The process of ripening of cream was carried out multistep, regimes were selected depending on seasonal changes in the composition of milk fat. For raw materials of the autumn-winter period, for the values of iodine number 29.1–34.5, the first stage of ripening was carried out at a temperature of 8°C for 2 hours, the second stage – at 21°C for 7 hours, the third stage – at 13°C for 10 hours. For raw of spring-summer period, for the values of iodine number 34.5–40.1, the first stage of ripening was carried out at 21°C for 6 hours, the second stage – at 13°C for 4 hours, the third stage – at 8°C for 8 hours. It has been established that individual modes of low-temperature cream preparation, taking into account seasonal changes in the composition of milk fat, make it possible to obtain cream before churning almost with the same indexes of effective viscosity. The content of the crystalline phase of milk fat under both temperature regimes was 38.7–40.1%, which is sufficient to obtain of proper consistency sour-cream butter. The content of diacetyl and volatile organic acids more depend on the level of fermentation of cream than on the technological regimes of ripening and seasonality of raw materials. It has been proved that an increase in the fermentation degree of cream promotes an increase in the acidity of plasma and the content of aroma-producing components in the butter, and, accordingly, affects the degree of the sour taste. It is recommended for the production of cultured butter to begin the cream when the acidity of the plasma reaches 60ºT, which ensures the formation of high sensorial characteristic of the finished product.
Investigation of Physical and Chemical Properties of Low-temperature Hydraulic Binder from Latvia’s Raw Materials
