Influence of laser power on stiffness calibration of optical tweezers

2016 ◽  
Vol 37 (6) ◽  
pp. 517-522
Author(s):  
Zhang Yuling ◽  
Zhou Zhehai ◽  
Zhu Lianqing
Keyword(s):  
2013 ◽  
Vol 787 ◽  
pp. 423-426
Author(s):  
Kai Xu ◽  
Jing Li ◽  
Gang Du ◽  
Chun Li Zhu ◽  
Peng Fei Li ◽  
...  

A microsphere trapped by optical tweezers moves according to the Brownian motion law, which can be described by the Langevin equation. Based on it, a quadrant photodiode (QD) is used to track the displacement of the microsphere with a diameter of 2.5um trapped by holographic optical tweezers, and power spectrum method is adopted to obtain radial trap stiffness. Experiments show that the trap stiffness increases with the increase of the laser power, and decreases as the distance between the optical trap and the inside bottom surface of the sample cell increases.


2020 ◽  
Vol 30 (4) ◽  
pp. 355
Author(s):  
Nguyen Manh Thang

In this paper, a new nonlinear double-arm optical tweezer combining Mach-Zenhder interferometer, objective lens and organic dye layer is proposed. Based on the ray-optical and wave optical approximations, the expression describing the separation of two trap centers and laser intensity distribution is derived. The obtained results show that the separation between two trap centers, the laser intensity distribution, trap region's area and optical trap efficiency can be controlled by tuning laser power. The proposed model is seen to be a double-arm optical tweezer for controlling 3D microsphere by optical method.


2020 ◽  
Vol 61 (9) ◽  
Author(s):  
P. Ghoddoosi Dehnavi ◽  
D. Wei ◽  
M.-E. Aubin-Tam ◽  
D. S. W. Tam

Abstract In the study of micro-scale biological flows, velocimetry methods based on passive tracers, such as micro-PIV and micro-PTV, are well established to characterize steady flows. However, these methods become inappropriate for measuring unsteady flows of small amplitude, because, on these scales, the motion of passive tracers cannot be distinguished from Brownian motion. In this study, we use optical tweezers (OTs) in combination with Kalman filtering, to measure unsteady microscopic flows with high temporal accuracy. This method is referred to as optical tweezers-based velocimetry (OTV). The OTV method measures the nanometric displacements of a trapped bead, and predicts the instantaneous velocity of the flow by employing a Kalman filter. We discuss the accuracy of OTV in measuring unsteady flows with 1.5–70 $$\upmu$$ μ m s$$^{-1}$$ - 1 amplitudes and 10–90 Hz frequencies. We quantify how the bead size and the laser power affect the velocimetry accuracy, and specify the optimal choices for the bead size and laser power to measure different unsteady flows. OTV accurately measures unsteady flows with amplitudes as small as 3–6 $$\upmu$$ μ m s$$^{-1}$$ - 1 . We compare the accuracy of OTV and micro-PTV, and characterize the flow regime for which OTV outperforms micro-PTV. We also demonstrate the robustness of OTV by measuring the unsteady flow created by the cilia of green alga Chlamydomonas reinhardtii, and comparing with numerical predictions based on Stokes equations. An open-source implementation of the OTV software in Matlab is available through the 4TU.Centre for Research Data. Graphic abstract


2018 ◽  
Vol 1 (4) ◽  
pp. 44 ◽  
Author(s):  
Leandro Oliveira ◽  
Warlley Campos ◽  
Marcio Rocha

We propose an optical tweezers setup based on an annular-shaped laser beam that is efficient to trap 2.8 μ m-diameter superparamagnetic particles. The optical trapping of such particles was fully characterized, and a direct absolute comparison with a geometrical optics model was performed. With this comparison, we were able to show that light absorption by the superparamagnetic particles is negligible for our annular beam tweezers, differing from the case of conventional Gaussian beam tweezers, in which laser absorption by the beads makes stable trapping difficult. In addition, the trap stiffness of the annular beam tweezers increases with the laser power and with the bead distance from the coverslip surface. While this first result is expected and similar to that achieved for conventional Gaussian tweezers, which use ordinary dielectric beads, the second result is quite surprising and different from the ordinary case, suggesting that spherical aberration is much less important in our annular beam geometry. The results obtained here provide new insights into the development of hybrid optomagnetic tweezers, which can apply simultaneously optical and magnetic forces on the same particles.


2013 ◽  
Vol 647 ◽  
pp. 278-282
Author(s):  
Ju Nan Kuo ◽  
Tian Lin Rao

Cell-cell interactions through direct contact play a critical role in cellular communication and coordination. In this paper, the adhesion force between Jurkat cells in contact with one another and in contact with a PDMS surface, respectively, is measured using optical tweezers. The experimental results show that the optical tweezers have a power-normalized force of 0.015 pN/mW. It is shown that laser power of 4.0 mW and 12.0 mW are required to separate two and three mutually-attached Jurkat cells, respectively. Moreover, the separation power increases as the adhesion time between the cells increases.


2008 ◽  
Vol 74 (8) ◽  
pp. 2441-2446 ◽  
Author(s):  
M. B. Rasmussen ◽  
L. B. Oddershede ◽  
H. Siegumfeldt

ABSTRACT We investigated the degree of physiological damage to bacterial cells caused by optical trapping using a 1,064-nm laser. The physiological condition of the cells was determined by their ability to maintain a pH gradient across the cell wall; healthy cells are able to maintain a pH gradient over the cell wall, whereas compromised cells are less efficient, thus giving rise to a diminished pH gradient. The pH gradient was measured by fluorescence ratio imaging microscopy by incorporating a pH-sensitive fluorescent probe, green fluorescent protein or 5(6)-carboxyfluorescein diacetate succinimidyl ester, inside the bacterial cells. We used the gram-negative species Escherichia coli and three gram-positive species, Listeria monocytogenes, Listeria innocua, and Bacillus subtilis. All cells exhibited some degree of physiological damage, but optically trapped E. coli and L. innocua cells and a subpopulation of L. monocytogenes cells, all grown with shaking, showed only a small decrease in pH gradient across the cell wall when trapped by 6 mW of laser power for 60 min. However, another subpopulation of Listeria monocytogenes cells exhibited signs of physiological damage even while trapped at 6 mW, as did B. subtilis cells. Increasing the laser power to 18 mW caused the pH gradient of both Listeria and E. coli cells to decrease within minutes. Moreover, both species of Listeria exhibited more-pronounced physiological damage when grown without shaking than was seen in cells grown with shaking, and the degree of damage is therefore also dependent on the growth conditions.


2005 ◽  
Vol 73 (3) ◽  
pp. 201-205 ◽  
Author(s):  
N. B. Viana ◽  
M. S. Rocha ◽  
O. N. Mesquita

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4108
Author(s):  
Jarinee Kiang-ia ◽  
Rahut Taeudomkul ◽  
Pongthep Prajongtat ◽  
Padetha Tin ◽  
Apichart Pattanaporkratana ◽  
...  

Continuous rotation of a cholesteric droplet under the heat gradient was observed by Lehmann in 1900. This phenomenon, the so-called Lehmann effect, consists of unidirectional rotation around the heat flux axis. We investigate this gradient heat effect using infrared laser optical tweezers. By applying single trap linearly polarized optical tweezers onto a radial achiral nematic liquid crystal droplet, trapping of the droplet was performed. However, under a linearly polarized optical trap, instead of stable trapping of the droplet with slightly deformed molecular directors along with a radial hedgehog defect, anomalous continuous rotation of the droplet was observed. Under low power laser trapping, the droplet appeared to rotate clockwise. By continuously increasing the laser power, a stable trap was observed, followed by reverse directional rotation in a higher intensity laser trap. Optical levitation of the droplet in the laser beam caused the heat gradient, and a breaking of the symmetry of the achiral nematic droplet. These two effects together led to the rotation of the droplet under linearly polarized laser trapping, with the sense of rotation depending on laser power.


2011 ◽  
Vol 19 (12) ◽  
pp. 11759 ◽  
Author(s):  
Mohammed Mahamdeh ◽  
Citlali Pérez Campos ◽  
Erik Schäffer
Keyword(s):  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
F. Mangini ◽  
M. Ferraro ◽  
M. Zitelli ◽  
V. Kalashnikov ◽  
A. Niang ◽  
...  

AbstractWe demonstrate a new practical approach for generating multicolour spiral-shaped beams. It makes use of a standard silica optical fibre, combined with a tilted input laser beam. The resulting breaking of the fibre axial symmetry leads to the propagation of a helical beam. The associated output far-field has a spiral shape, independently of the input laser power value. Whereas, with a high-power near-infrared femtosecond laser, a visible supercontinuum spiral emission is generated. With appropriate control of the input laser coupling conditions, the colours of the spiral spatially self-organize in a rainbow distribution. Our method is independent of the laser source wavelength and polarization. Therefore, standard optical fibres may be used for generating spiral beams in many applications, ranging from communications to optical tweezers and quantum optics.


Sign in / Sign up

Export Citation Format

Share Document