scholarly journals Swelling Behavior of Elastomers under Water, Oil, and Acid

2021 ◽  
Author(s):  
Sayyad Zahid Qamar ◽  
Maaz Akhtar ◽  
Tasneem Pervez
Keyword(s):  
Modeling And Simulation ◽  
Experimental Studies ◽  
Swelling Behavior ◽  
Material Behavior ◽  
Field Conditions ◽  
Related Material ◽  
Sultan Qaboos University ◽  
Design Improvement ◽  
Petroleum Development

It is very important to determine the behavior of elastomer materials under realistic well conditions in order to select appropriate swelling elastomers for a particular set of field conditions, for successful modeling and simulation of various downhole processes, and for design improvement of swell packers and other sealing applications. In collaboration with national and regional petroleum development and rubber engineering companies, a series of experimental studies were therefore conducted at Sultan Qaboos University for characterization of swelling related material behavior of different elastomers. Results from some of these investigations (studies A, B, and C) are reported and discussed in this chapter.

EXPERIMENTAL STUDIES OF OIL VISCOSITY IN FIELD CONDITIONS TO ASSESS THE ERROR OF THE MEASUREMENT WHEN USING HOPPLER VISCOSITY GAGE

2020 ◽  
pp. 54-59
Author(s):  
A.A. Isaev ◽  
◽  
V.I. Malykhin ◽  
A.A. Sharifullin ◽  
◽  
...  
Keyword(s):  
Experimental Studies ◽  
Field Conditions ◽  
Oil Viscosity

Synthesis and characterization of L-threonine ammonium bromide: grown on single crystal with experimental studies on NLO

2021 ◽  
Vol 44 (3) ◽  
Author(s):  
T KALAIARASI ◽  
M SENTHILKUMAR ◽  
S SHANMUGAN ◽  
T JARIN ◽  
V CHITHAMBARAM ◽  
...  
Keyword(s):  
Single Crystal ◽  
Experimental Studies ◽  
Synthesis And Characterization ◽  
Ammonium Bromide

scholarly journals Characterization of swelling behavior of carbon nano-filler modified polydimethylsiloxane composites

2021 ◽  
pp. 009524432110061
Author(s):  
Bo Yang ◽  
Balakrishnan Nagarajan ◽  
Pierre Mertiny
Keyword(s):  
Digital Image Analysis ◽  
Swelling Behavior ◽  
Optical Measurements ◽  
Natural Phenomenon ◽  
Cross Linking ◽  
Dimensional Changes ◽  
Experimental Findings ◽  
Carbon Based

Polymers may absorb fluids from their surroundings via the natural phenomenon of swelling. Dimensional changes due to swelling can affect the function of polymer components, such as in the case of seals, microfluidic components and electromechanical sensors. An understanding of the swelling behavior of polymers and means for controlling it can improve the design of polymer components, for example, for the previously mentioned applications. Carbon-based fillers have risen in popularity to be used for the property enhancement of resulting polymer composites. The present investigation focuses on the effects of three carbon-based nano-fillers (graphene nano-platelets, carbon black, and graphene nano-scrolls) on the dimensional changes of polydimethylsiloxane composites due to swelling when immersed in certain organic solvents. For this study, a facile and expedient methodology comprised of optical measurements in conjunction with digital image analysis was developed as the primary experimental technique to quantify swelling dimensional changes of the prepared composites. Other experimental techniques assessed polymer cross-linking densities and elastic mechanical properties of the various materials. The study revealed that the addition of certain carbon-based nano-fillers increased the overall swelling of the composites. The extent of swelling further depended on the organic solvent in which the composites were immersed in. Experimental findings are contrasted with published models for swelling prediction, and the role of filler morphology on swelling behavior is discussed.

scholarly journals Material parametrization of natural rubber based compound and characterization of crack propagation under consideration of dissipative effects

2021 ◽  
Author(s):  
Dan Pornhagen ◽  
Konrad Schneider ◽  
Markus Stommel
Keyword(s):  
Energy Dissipation ◽  
Crack Propagation ◽  
Natural Rubber ◽  
Experimental Tests ◽  
Material Behavior ◽  
Prony Series ◽  
Material Forces ◽  
Cracking Behavior ◽  
Dissipative Effects

AbstractMost concepts to characterize crack propagation were developed for elastic materials. When applying these methods to elastomers, the question is how the inherent energy dissipation of the material affects the cracking behavior. This contribution presents a numerical analysis of crack growth in natural rubber taking energy dissipation due to the visco-elastic material behavior into account. For this purpose, experimental tests were first carried out under different load conditions to parameterize a Prony series as well as a Bergström–Boyce model with the results. The parameterized Prony series was then used to perform numerical investigations with respect to the cracking behavior. Using the FE-software system ANSYS and the concept of material forces, the influence and proportion of the dissipative components were discussed.

Experimental studies on the punch shear characterization of satin weave graphite/epoxy composites at room and elevated temperatures

2004 ◽  
Vol 368 (1-2) ◽  
pp. 269-279 ◽  
Author(s):  
M.V Hosur ◽  
S.M.Waliul Islam ◽  
U.K Vaidya ◽  
P.K Dutta ◽  
S Jeelani
Keyword(s):  
Elevated Temperatures ◽  
Experimental Studies ◽  
Epoxy Composites

Structural Response and Remaining Life of Damaged Composites

2015 ◽  
Vol 813-814 ◽  
pp. 106-110
Author(s):  
Dalbir Singh ◽  
C. Ganesan ◽  
A. Rajaraman
Keyword(s):  
Hybrid Approach ◽  
Experimental Studies ◽  
Structural Response ◽  
Material Behavior ◽  
Experimental Results ◽  
Life Assessment ◽  
Nonlinear Material ◽  
Remaining Life ◽  
Design Effectiveness ◽  
Remaining Life Assessment

Composites are being used in variety of applications ranging from defense and aircraft structures, where usage is profuse, to vehicle structures and even for repair and rehabilitation. Most of these composites are made of different laminates glued together with matrix for binding and now-a-days fibers of different types are embedded in a composite matrix. The characterizations of material properties of composites are mostly experimental with analytical modeling used to simulate the system behavior. But many times, the composites develop damage or distress in the form of cracking while they are in service and this adds a different dimension as one has to evaluate the response with the damage so that its performance during its remaining life is satisfactory. This is the objective of the present study where a hybrid approach using experimental results on damaged specimens and then analytical finite element are used to evaluate response. This will considerably help in remaining life assessment-RLA- for composites with damage so that design effectiveness with damage could be assessed. This investigation has been carried out on a typical composite with carbon fiber reinforcements, manufactured by IPCL Baroda (India) with trade name INDCARF-30. Experimental studies were conducted on undamaged and damaged specimens to simulate normal continuous loading and discontinuous loading-and-unloading states in actual systems. Based on the experimental results, material characterization inputs are taken and analytical studies were carried out using ANSYS to assess the response under linear and nonlinear material behavior to find the stiffness decay. Using stiffness decay RLA was computed and curves are given to bring the influence of type of damage and load at which damage had occurred.

Dynamic Characterization of a Valveless Micropump Considering Entrapped Gas Bubbles

2013 ◽  
Vol 135 (9) ◽  
Author(s):  
Songjing Li ◽  
Jixiao Liu ◽  
Dan Jiang
Keyword(s):  
Numerical Simulation ◽  
Theoretical Model ◽  
Experimental Studies ◽  
Gas Bubbles ◽  
Chamber Pressure ◽  
Dynamic Characterization ◽  
Valveless Micropump ◽  
Performance Deterioration ◽  
Trapped Gas

Unexpected gas bubbles in microfluidic devices always bring the problems of clogging, performance deterioration, and even device functional failure. For this reason, the aim of this paper is to study the characterization variation of a valveless micropump under different existence conditions of gas bubbles based on a theoretical modeling, numerical simulation, and experiment. In the theoretical model, we couple the vibration of piezoelectric diaphragm, the pressure drop of the nozzle/diffuser and the compressibility of working liquid when gas bubbles are entrapped. To validate the theoretical model, numerical simulation and experimental studies are carried out to investigate the variation of the pump chamber pressure influenced by the gas bubbles. Based on the numerical simulation and the experimental data, the outlet flow rates of the micropump with different size of trapped gas bubbles are calculated and compared, which suggests the influence of the gas bubbles on the dynamic characterization of the valveless micropump.

scholarly journals Properties of the high burnup structure in nuclear light water reactor fuel

2017 ◽  
Vol 105 (11) ◽  
Author(s):  
Thierry Wiss ◽  
Vincenzo V. Rondinella ◽  
Rudy J. M. Konings ◽  
Dragos Staicu ◽  
Dimitrios Papaioannou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Nuclear Fuel ◽  
Experimental Studies ◽  
Fuel Pellet ◽  
Extended Defects ◽  
Safety Margins ◽  
Fission Gas ◽  
High Burnup ◽  
Formed Structure

AbstractThe formation of the high burnup structure (HBS) is possibly the most significant example of the restructuring processes affecting commercial nuclear fuel in-pile. The HBS forms at the relatively cold outer rim of the fuel pellet, where the local burnup is 2–3 times higher than the average pellet burnup, under the combined effects of irradiation and thermo-mechanical conditions determined by the power regime and the fuel rod configuration. The main features of the transformation are the subdivision of the original fuel grains into new sub-micron grains, the relocation of the fission gas into newly formed intergranular pores, and the absence of large concentrations of extended defects in the fuel matrix inside the subdivided grains. The characterization of the newly formed structure and its impact on thermo-physical or mechanical properties is a key requirement to ensure that high burnup fuel operates within the safety margins. This paper presents a synthesis of the main findings from extensive studies performed at JRC-Karlsruhe during the last 25 years to determine properties and behaviour of the HBS. In particular, microstructural features, thermal transport, fission gas behaviour, and thermo-mechanical properties of the HBS will be discussed. The main conclusion of the experimental studies is that the HBS does not compromise the safety of nuclear fuel during normal operations.

Material Behavior of 2D Steel Lattices with Different Unit-Cell Patterns

2021 ◽  
Vol 1046 ◽  
pp. 15-21
Author(s):  
Paiboon Limpitipanich ◽  
Pana Suttakul ◽  
Yuttana Mona ◽  
Thongchai Fongsamootr
Keyword(s):  
Elastic Modulus ◽  
Experimental Studies ◽  
Base Material ◽  
Unit Cell ◽  
Material Behavior ◽  
Closed Form Solutions ◽  
The Past ◽  
Weight Density ◽  
Unit Cells ◽  
Cell Patterns

Over the past years, two-dimensional lattices have attracted the attention of several researchers because they are lightweight compared with their full-solid counterparts, which can be used in various engineering applications. Nevertheless, since lattices are manufactured by reducing the base material, their stiffnesses then become lower. This study presents the weight efficiency of the lattices defined by relations between the elastic modulus and the weight density of the lattices. In this study, the mechanical behavior of 2D lattices is described by the in-plane elastic modulus. Experimental studies on the elastic modulus of the 2D lattices made of steel are performed. Three lattices having different unit cells, including square, body-centered, and triangular unit cells, are considered. The elastic modulus of each lattice is investigated by tensile testing. All specimens of the lattices are made of steel and manufactured by waterjet cutting. The experimental results of the elastic modulus of the lattices with the considered unit-cell patterns are validated with those obtained from finite element simulations. The results obtained in this study are also compared with the closed-form solutions founded in the literature. Moreover, the unit-cell pattern yielding the best elastic modulus for the lattice is discussed through weight efficiency.

Sign in / Sign up

Export Citation Format

Share Document