Dynamic in Vivo Subtalar Joint Kinematics Measured Using a Skin Marker–Based Protocol

2014 ◽  
Vol 104 (4) ◽  
pp. 357-364 ◽  
Author(s):  
Ivan Birch ◽  
Kevin Deschamps
Keyword(s):  
Subtalar Joint ◽  
Stance Phase ◽  
Face Validity ◽  
Exclusion Criteria ◽  
In Vivo Kinematics ◽  
Skin Marker ◽  
The Face ◽  
And Function ◽  
Interpatient Variation

Background The subtalar joint allows complex motion of the foot relative to the leg, the analysis of which has presented a major challenge for researchers. The considerable interpatient variation in structure and function of the subtalar joint highlights the importance of developing a protocol to assess the kinematics in individuals rather than developing an overarching description of function. The use of skin-mounted markers is, therefore, preferable, allowing the noninvasive collection of data. We sought to assess the face validity of a skin-mounted marker–based protocol to measure the in vivo kinematics of the subtalar joint. Methods Thirty participants were recruited using minimal exclusion criteria. A previously tested skin-mounted marker placement protocol was used in conjunction with two CODA MPX 30 sensors to capture data during walking. The data produced were compared with those from previous studies that used bone-mounted markers. Results The results in all three planes represented feasible outcomes compared with those of previous studies, the data falling within the ranges published. Patterns of movement demonstrated are similar to, although not the same as, those shown by previous investigations. Conclusions This study did not produce patterns of movement that exactly matched those of previous investigations. The results were, however, within the ranges previously published, and the patterns of movement shown were feasible. The results suggest the face validity of the method as a means of assessing the in vivo kinematics of the subtalar joint during the stance phase of gait.

Three-Dimensional In Vivo Kinematics of the Subtalar Joint During Dorsi-Plantarflexion and Inversion-Eversion

2009 ◽  
Vol 30 (05) ◽  
pp. 432-438 ◽  
Author(s):  
Akira Goto ◽  
Hisao Moritomo ◽  
Tomonobu Itohara ◽  
Tetsu Watanabe ◽  
Kazuomi Sugamoto
Keyword(s):  
Subtalar Joint ◽  
Three Dimensional ◽  
In Vivo Kinematics ◽  
And Inversion

scholarly journals In Vivo Kinematics of the Tibiotalar and Subtalar Joints in Asymptomatic Subjects: A High-Speed Dual Fluoroscopy Study

2016 ◽  
Vol 138 (9) ◽  
Author(s):  
Koren E. Roach ◽  
Bibo Wang ◽  
Ashley L. Kapron ◽  
Niccolo M. Fiorentino ◽  
Charles L. Saltzman ◽  
...  
Keyword(s):  
Subtalar Joint ◽  
High Speed ◽  
External Rotation ◽  
Translational Motion ◽  
Three Dimensional ◽  
Tibiotalar Joint ◽  
In Vivo Kinematics ◽  
Asymptomatic Subjects ◽  
Capture Techniques

Measurements of joint kinematics are essential to understand the pathomechanics of ankle disease and the effects of treatment. Traditional motion capture techniques do not provide measurements of independent tibiotalar and subtalar joint motion. In this study, high-speed dual fluoroscopy images of ten asymptomatic adults were acquired during treadmill walking at 0.5 m/s and 1.0 m/s and a single-leg, balanced heel-rise. Three-dimensional (3D) CT models of each bone and dual fluoroscopy images were used to quantify in vivo kinematics for the tibiotalar and subtalar joints. Dynamic tibiotalar and subtalar mean joint angles often exhibited opposing trends during captured stance. During both speeds of walking, the tibiotalar joint had significantly greater dorsi/plantarflexion (D/P) angular ROM than the subtalar joint while the subtalar joint demonstrated greater inversion/eversion (In/Ev) and internal/external rotation (IR/ER) than the tibiotalar joint. During balanced heel-rise, only D/P and In/Ev were significantly different between the tibiotalar and subtalar joints. Translational ROM in the anterior/posterior (AP) direction was significantly greater in the subtalar than the tibiotalar joint during walking at 0.5 m/s. Overall, our results support the long-held belief that the tibiotalar joint is primarily responsible for D/P, while the subtalar joint facilitates In/Ev and IR/ER. However, the subtalar joint provided considerable D/P rotation, and the tibiotalar joint rotated about all three axes, which, along with translational motion, suggests that each joint undergoes complex, 3D motion.

In Vivo Forces in the Plantar Fascia During the Stance Phase of Gait

2003 ◽  
Vol 93 (6) ◽  
pp. 429-442 ◽  
Author(s):  
Erin D. Ward ◽  
Kevin M. Smith ◽  
Jay R. Cocheba ◽  
Patrick E. Patterson ◽  
Robert D. Phillips
Keyword(s):  
Muscle Activity ◽  
Plantar Fasciitis ◽  
Subtalar Joint ◽  
Stance Phase ◽  
Plantar Fascia ◽  
Heel Strike ◽  
Cadaveric Specimen ◽  
Orthopedic Medicine ◽  
Loading System

Plantar fasciotomies have become commonplace in podiatric and orthopedic medicine for the treatment of plantar fasciitis. However, several complications have been associated with plantar fascial release. It has been speculated that the cause of these complications is excessive release of the plantar fascia. The aim of this project was to determine whether the amount of fascia released, from medial to lateral, causes a significant increase in force in the remaining fascia. A dynamic loading system was developed that allowed a cadaveric specimen to replicate the stance phase of gait. The system was capable of applying appropriate muscle forces to the extrinsic tendons on the foot and replicating the in vivo timing of the muscle activity while applying force to the tibia and fibula from heel strike to toe-off. As the plantar fascia was sequentially released from medial to lateral, from intact to 33% released to 66% released, the real-time force and the duration of force in the remaining fascia increased significantly, and the force was shifted later in propulsion. In addition, the subtalar joint was unable to resupinate as the amount of fascia release increased, indicating a direct relationship between the medial band of the plantar fascia and resupination of the subtalar joint during late midstance and propulsion. (J Am Podiatr Med Assoc 93(6): 429-442, 2003)

In vivo kinematics of functional ankle instability patients during the stance phase of walking

2019 ◽  
Vol 73 ◽  
pp. 262-268 ◽  
Author(s):  
Shengxuan Cao ◽  
Chen Wang ◽  
Gonghao Zhang ◽  
Xin Ma ◽  
Xu Wang ◽  
...  
Keyword(s):  
Stance Phase ◽  
Ankle Instability ◽  
Functional Ankle Instability ◽  
In Vivo Kinematics

The In Vitro Reliability of the CODA MPX30 as the Basis for a Method of Assessing the In Vivo Motion of the Subtalar Joint

2011 ◽  
Vol 101 (5) ◽  
pp. 400-406 ◽  
Author(s):  
Ivan Birch ◽  
Kevin Deschamps
Keyword(s):  
Subtalar Joint ◽  
Joint Movement ◽  
Marker Position ◽  
In Vivo Measurement ◽  
Marker Location ◽  
Analysis System ◽  
And Function ◽  
Segmental Orientation

Background: The considerable variation in subtalar joint structure and function shown by studies indicates the importance of developing a noninvasive in vivo technique for assessing subtalar joint movement. This article reports the in vitro testing of the CODA MPX30, an active infrared marker motion analysis system. This work represents the first stage in the development of a noninvasive in vivo method for measuring subtalar joint motion during walking. Methods: The in vitro repeatability of the CODA MPX30 system’s measurements of marker position, simple and intermarker set angles, was tested. Angular orientations of markers representing the position of the talus and the calcaneus were measured using a purpose-designed marker placement model. Results: Marker location measurements were shown to vary by less than 1.0 mm in all of the planes. The measurement of a 90° angle was also found to be repeatable in all of the planes, although measurements made in the yz plane were shown to be consistently inaccurate (mean, 92.47°). Estimation of segmental orientation was found to be repeatable. Estimations of marker set orientations were shown to increase in variability after a coordinate transform was performed (maximum SD, 1.14°). Conclusions: The CODA MPX30 was shown to produce repeatable estimations of marker position. Levels of variation in segmental orientation estimates were shown to increase subsequent to coordinate transforms. The combination of the CODA MPX30 and an appropriate marker placement model offers the basis of an in vivo measurement strategy of subtalar joint movement, an important development in the understanding of the function of the joint during gait. (J Am Podiatr Med Assoc 101(5): 400–406, 2011)

Osseointegration interface of calcified bone and endosseous implants

1992 ◽  
Vol 50 (2) ◽  
pp. 1096-1097
Author(s):  
K.E. Krizan ◽  
J.E. Laffoon ◽  
M.J. Buckley
Keyword(s):  
Structure And Function ◽  
Titanium Implants ◽  
En Bloc ◽  
Endosseous Implants ◽  
Ultrastructural Studies ◽  
The Past ◽  
Cacodylate Buffer ◽  
One Year ◽  
And Function

With increase use of tissue-integrated prostheses in recent years it is a goal to understand what is happening at the interface between haversion bone and bulk metal. This study uses electron microscopy (EM) techniques to establish parameters for osseointegration (structure and function between bone and nonload-carrying implants) in an animal model. In the past the interface has been evaluated extensively with light microscopy methods. Today researchers are using the EM for ultrastructural studies of the bone tissue and implant responses to an in vivo environment. Under general anesthesia nine adult mongrel dogs received three Brånemark (Nobelpharma) 3.75 × 7 mm titanium implants surgical placed in their left zygomatic arch. After a one year healing period the animals were injected with a routine bone marker (oxytetracycline), euthanized and perfused via aortic cannulation with 3% glutaraldehyde in 0.1M cacodylate buffer pH 7.2. Implants were retrieved en bloc, harvest radiographs made (Fig. 1), and routinely embedded in plastic. Tissue and implants were cut into 300 micron thick wafers, longitudinally to the implant with an Isomet saw and diamond wafering blade [Beuhler] until the center of the implant was reached.

Functional characterization of human brown adipose tissue metabolism

2020 ◽  
Vol 477 (7) ◽  
pp. 1261-1286 ◽  
Author(s):  
Marie Anne Richard ◽  
Hannah Pallubinsky ◽  
Denis P. Blondin
Keyword(s):  
Adipose Tissue ◽  
Brown Adipose Tissue ◽  
Functional Characterization ◽  
Human Infants ◽  
Positron Emission ◽  
Brown Adipose ◽  
Treatment Of Obesity ◽  
And Function

Brown adipose tissue (BAT) has long been described according to its histological features as a multilocular, lipid-containing tissue, light brown in color, that is also responsive to the cold and found especially in hibernating mammals and human infants. Its presence in both hibernators and human infants, combined with its function as a heat-generating organ, raised many questions about its role in humans. Early characterizations of the tissue in humans focused on its progressive atrophy with age and its apparent importance for cold-exposed workers. However, the use of positron emission tomography (PET) with the glucose tracer [18F]fluorodeoxyglucose ([18F]FDG) made it possible to begin characterizing the possible function of BAT in adult humans, and whether it could play a role in the prevention or treatment of obesity and type 2 diabetes (T2D). This review focuses on the in vivo functional characterization of human BAT, the methodological approaches applied to examine these features and addresses critical gaps that remain in moving the field forward. Specifically, we describe the anatomical and biomolecular features of human BAT, the modalities and applications of non-invasive tools such as PET and magnetic resonance imaging coupled with spectroscopy (MRI/MRS) to study BAT morphology and function in vivo, and finally describe the functional characteristics of human BAT that have only been possible through the development and application of such tools.

Sign in / Sign up

Export Citation Format

Share Document