scholarly journals Stabilization of black cotton soil using coconut fiber

Author(s):  
K.U. Arathi ◽  
K.M. Arhulya ◽  
V. Vinaya ◽  
P.V. Pooja ◽  
V.V. Athira

Black cotton soil is a soil with low bearing capacity, swelling and shrinkage characteristics. Due to its peculiar characteristics, it forms a very poor foundation material. As black cotton soil is an expansive soil; it creates problem for lightly loaded structure than moderately loaded structure. Through this project, we are trying to study the improvements in the properties of soil by adding coconut fiber of varying percentages. Tests will be conducted to determine liquid limit and unconfined compression strength. Stabilization of soil is an effective method for improving the properties of soil. It has great significance in the future projects. Keywords: Soil stabilization, CBR, Atterberg limits

2021 ◽  
Vol 878 (1) ◽  
pp. 012050
Author(s):  
R P W Gultom ◽  
R M Simanjuntak

Abstract Expansive clay soils are high shrinkage soils that have low bearing capacity. So an effort is needed to reduce the nature of its swelling. One effort that can be done is the method of soil stabilization, where the soil is mixed with materials that can reduce soil swelling and increase the shear strength of the soil. One of the materials that can be used is kaolin powder. Kaolin is a stabilizing agent found in nature so it is easy to obtain. The purpose of this research is to analyse the decrease of expansive soil swelling and the value of its unconfined compression strength at various soaking times. The test was carried out by mixing 9% kaolin powder against dry soil weight. The stabilized soils were then compacted as samples to be soaked with time variations of 0 days, 3 days, 7 days, 10 days, and 14 days. The results of the test after soaking 14 days is a decrease of the stabilized soil swelling value up to 67.78%. The unconfined compression strength is increase up to 77.28% compared to its natural condition.


2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Ali Ateş

Soil stabilization has been widely used as an alternative to substitute the lack of suitable material on site. The use of nontraditional chemical stabilizers in soil improvement is growing daily. In this study a laboratory experiment was conducted to evaluate the effects of waterborne polymer on unconfined compression strength and to study the effect of cement grout on pre-venting of liquefiable sandy soils. The laboratory tests were performed including grain size of sandy soil, unit weight, ultrasonic pulse velocity, and unconfined compressive strength test. The sand and various amounts of polymer (1%, 2%, 3%, and 4%) and cement (10%, 20%, 30%, and 40%) were mixed with all of them into dough using mechanical kneader in laboratory conditions. Grouting experiment is performed with a cylindrical mould of  mm. The samples were subjected to unconfined compression tests to determine their strength after 7 and 14 days of curing. The results of the tests indicated that the waterborne polymer significantly improved the unconfined compression strength of sandy soils which have susceptibility of liquefaction.


Abstract. The analysis of GSA for the stabilization of soil samples is the subject of this research paper. In recent years, soil stabilization techniques have been effective in improving the shear strength parameters of poor soils. GSA is a naturally occurring substance that causes human health and environmental issues. Physical properties of soil were calculated, including Atterberg's limits, compaction characteristics, and strength characteristics of virgin soil samples. GSA was applied to the soil in various percentages (2 to 10 percent). The soil sample's intensity increased up to 6% before decreasing. It is clear that 6% of GSA to the soil is an optimum percentage and it leads to an increase in shear strength and bearing capacity in expansive soil.


2019 ◽  
Vol 8 (4) ◽  
pp. 1921-1926

Expansive soil implies low bearing capacity and high swelling property perhaps causes serious problems during construction includes low stability, non-uniform settlements and shear distribution. The soil stabilization is one such method to improve the process and it depends upon the soil condition and the nature of soil according to the desired requirements of footing. This study aims to increase the index and engineering properties of soil by addition of the natural fiber (sisal), lime and silica fume. Soil stabilization by lime involves the admixture in the form of calcium oxide or calcium hydroxide to the soil and silica fume as an industrial waste by product acts as a pore filling material. The project is economically viable because the stabilizing materials are easily available and less cost. This project is also analyzed by using the PLAXIS software.


2019 ◽  
Vol 28 (50) ◽  
pp. 44-61 ◽  
Author(s):  
Jijo James

The investigation evaluated the strength benefits obtained by amending cement stabilization of an expansive soil by using saw dust ash (SDA), a waste generated in wood milling industries due to burning. The experimental program involved the preparation of cylindrical specimens of size 38 mm x 76mm for evaluating the unconfined compression strength (UCS) of the cement stabilized and amended samples cured for varying periods of 2 hours, 7, 14 and 28 days. Two cement contents of 2% and 6% by weight of soil were adopted to stabilize the soil. The SDA amended cement stabilized samples adopted SDA contents of 5%, 10% and 20% by weight of soil. Strength gain trends for the amended samples were also fitted based on the results of the UCS tests. In order to analyse benefits in pavement design and thickness reduction, the UCS values were used to predict the CBR value of the specimens based on which the reduction in pavement thickness was calculated for different traffic densities. The investigation revealed that 5% SDA amendment of cement stabilization can result in up to 26% increase in early strength and 20% increase in delayed strength. Based on the predicted CBR values, pavement thickness can be reduced up to 8.3%.


2021 ◽  
Author(s):  
Jing Ni ◽  
Shan-Shan Li ◽  
Lei Ma ◽  
Xueyu Geng

Recently, biopolymers have emerged in soil stabilisation. The efficiency of biopolymers in groundimprovement is mainly dependent on biopolymer types, soil types, biopolymer contents, curing periods,thermal treatment and mixing methods. However, the effect of the initial moisture content during samplepreparation stages, on the mechanical behaviours of biopolymer-treated soils, has not been fullyunderstood. The first part of this study probed the role of initial moisture content, in treating Shanghaiclay with the xanthan gum by performing standard proctor compaction tests, Atterberg limit tests,unconfined compression strength (UCS) tests and microstructural analysis, while the second part contributedto capture the fatigue behaviours of the samples treated with an ideal moisture content by performingconstant-amplitude and stepping-amplitude fatigue loading tests. Our results showed that theimprovement appeared to occur from an average optimum moisture content for the treated soils (treatedoptimum), which was 3% wet of the untreated optimum. As the initial moisture content increased, theUCS values were elevated. However, there existed an ideal initial moisture content leading to the maximumstrengthening efficiency. For xanthan gum content (i.e., the mass of xanthan gum with respect tothe mass of dry soil) ranging from 1.0% to 5.0%, this ideal value was between 1.1 and 1.2 times the treatedoptimum. Our results also indicated that xanthan gum, as a biopolymer soil strengthener, was efficient inincreasing either fatigue life or bearing capacity, under repeated loading for xanthan gum-soil matrices,when compared to untreated soils. While the untreated soils failed at the stress level of only half the UCS,the xanthan gum-treated soils with a 3.0% xanthan gum content sustained at the end of the tests. Thesedata imply the potential use of xanthan gum in soil stabilisation, under repeated loads.


2011 ◽  
Vol 374-377 ◽  
pp. 1823-1826
Author(s):  
Zhong Yu Liu ◽  
Yong Gang Xue ◽  
Xi Jun Wang

In order to investigate the mechanical behaviors of lime-stabilized soils with small lime content, the specimens with 4%~8% lime content and 90%~95% degree of compaction are prepared, and then in use for the unconfined compression strength test, the diametral compression test and the compression resilience modulus test after they have cured in a standard curing room for 7 to 180 days respectively. These test results show that all of the unconfined compression strength, the splitting strength and the compression modulus of resilience increase with the degree of compaction and the curing time. Thereinto, the compression modulus of resilience does rapidly between 28 and 90 curing days, and the unconfined compression strength of the soil with 4% lime content does little after 28 curing days while the compression strengths and the splitting strengths of the other soils do quickly until 90 curing days. In addition, for a given degree of compaction, these strengths of the soils with the less lime content are potentially greater at the early curing time.


Sign in / Sign up

Export Citation Format

Share Document