Evaluation and Selection of Thin-layer Drying Models for Paddy Dried in Static Flat-bed Batch Dryer
A Static flat-bed batch dryer was developed for drying paddy from harvesting moisture content (20 – 22%) to 12% for safe storage. The dryer mainly consisted of Blower, Heating chamber, Plenum chamber and drying chamber. Twenty kg paddy was dried in the developed dryer at two different inlet air flow rate (1 m3/min. and 1.26 m3/min). The machine has a capacity of 20 kg and temperature of drying air was 60 and 55°C respectively. The moisture content was recorded at every 15 minutes interval and moisture ratio plots were generated. The experimental data were fit in 8 different thin-layer drying models and statistical parameters along with the model constants were obtained. It was found that the Wang and Singh model with the highest values for R2 and the least values of RMSE in selected drying conditions has the best fit. Henderson & Pabis and Newton models were also found suitable for describing the drying kinetics of paddy in the developed dryer.