scholarly journals Dehydration Kinetics of Cassava, Yam and Potato Slices Using a Refractance WindowTM Dryer

2018 ◽  
Vol 3 (2) ◽  
Author(s):  
Akinjide A Akinola ◽  
Stanley N. Ezeorah
Keyword(s):  
Moisture Content ◽  
Thin Layer ◽  
Coefficient Of Determination ◽  
Plastic Film ◽  
Thin Layer Drying ◽  
Drying Models ◽  
Thin Layer Drying Models ◽  
Drying Curves ◽  
Kinetics Of ◽  
Potato Slices

 This study aims to investigate the drying characteristics of cassava, yam, and potato slices using a laboratory scale batch Refractance Window™ (RW) dryer. The experimental dryer was constructed by modifying a laboratory water bath. The bath was covered with a transparent Polyethylene terephthalate (PET) plastic film held in-place with angled edges. The cassava, yam, and potato slices were dried on the Refractance WindowTM dryer, and the variation of the moisture content of the slices during the drying process was measured. The water temperature beneath the plastic film was maintained at 60oC. The dehydration data were fitted to thin-layer drying models. Regression analysis suggested that the Haghi and Ghanadzadeh model best describes the dehydration behaviour for the 3 mm thick slices for the cassava, yam, and potato tubers. The coefficient of determination (R2) values of 0.999, 0.998, and 0.998 for the cassava, yam, and potato slices respectively were reported in all the models studied. The drying curves, the drying rate curves, and the Krischer curves, from the experimental drying data, was plotted. Observations indicate that the cassava, yams, and potatoes slices dried to below 0.11 g water/g-solid moisture content in about 150 min. This study was performed to facilitate the understanding of the design, modelling, and operations of a continuously operating RW dryer. Keywords: Refractance Window Drying, Thin Layer Drying Models, Yams, Cassava, Potatoes.

scholarly journals Drying Kinetics of Sliced Pineapples in a Solar Conduction Dryer

2017 ◽  
Vol 7 (2) ◽  
pp. 14 ◽  
Author(s):  
Luqman Ebow Ibn Daud ◽  
Isaac Nyambe Simate
Keyword(s):  
Thin Layer ◽  
Average Moisture Content ◽  
Drying Time ◽  
Sun Drying ◽  
Thin Layer Drying ◽  
Drying Models ◽  
Drying Model ◽  
Thin Layer Drying Models ◽  
Drying Curves ◽  
Kinetics Of

As a means of adding value to pineapple production and minimising post-harvest losses, sliced pineapples were dried using a Solar Conduction Dryer (SCD) and appropriate thin layer drying models to predict drying were developed whilst the performance of the SCD was also investigated. For the period of the experiment, ambient temperature and temperature in the dryer ranged from 24 to 37 °C and 25 to 46 ℃ respectively. The performance of the dryer was compared to open sun drying using pineapple slices of 3-5 mm in thickness where the slices were reduced from an average moisture content of 85.42 % (w.b.) to 12.23 % (w.b.) by the SCD and to 51.51 % (w.b.) by the open sun drying in 8 hours effective drying time. Pineapple slices of thicknesses 3 mm, 5 mm, 7 mm and 10 mm were simultaneously dried in the four drying chambers of the SCD and their drying curves simulated with twelve thin layer drying models. The Middilli model was found as the best fitted thin layer drying model for sliced pineapples. The optimum fraction of drying tray area that should be loaded with pineapples was also investigated by simultaneously loading 7 mm slices of pineapples at 50, 75, and 100 percent of drying tray area. Loading the slices at 50, 75 and 100 percent of drying tray area gave overall thermal efficiencies of 23, 32 and 44 percent, respectively, hence loading pineapple slices at 100 percent drying tray area was recommended as the best.

scholarly journals Evaluation and Selection of Thin-layer Drying Models for Paddy Dried in Static Flat-bed Batch Dryer

2020 ◽  
pp. 55-65
Author(s):  
Lubna Sadaf Anchal ◽  
Abhinav Dubey ◽  
Prassana Kumar
Keyword(s):  
Moisture Content ◽  
Thin Layer ◽  
Statistical Parameters ◽  
Heating Chamber ◽  
Thin Layer Drying ◽  
Drying Models ◽  
Thin Layer Drying Models ◽  
Drying Conditions ◽  
Kinetics Of ◽  
Selection Of

A Static flat-bed batch dryer was developed for drying paddy from harvesting moisture content (20 – 22%) to 12% for safe storage. The dryer mainly consisted of Blower, Heating chamber, Plenum chamber and drying chamber. Twenty kg paddy was dried in the developed dryer at two different inlet air flow rate (1 m3/min. and 1.26 m3/min). The machine has a capacity of 20 kg and temperature of drying air was 60 and 55°C respectively. The moisture content was recorded at every 15 minutes interval and moisture ratio plots were generated. The experimental data were fit in 8 different thin-layer drying models and statistical parameters along with the model constants were obtained. It was found that the Wang and Singh model with the highest values for R2 and the least values of RMSE in selected drying conditions has the best fit. Henderson & Pabis and Newton models were also found suitable for describing the drying kinetics of paddy in the developed dryer. 

scholarly journals Kinetika Pengeringan Lapisan Tipis Daun Jati Belanda (Thin Layer Drying Kinetics of Guazuma Ulmifolia Leaves)

2021 ◽  
Vol 8 (2) ◽  
pp. 53-62
Author(s):  
Hendri Syah ◽  
Armansyah Halomoan Tambunan ◽  
Edy Hartulistiyoso ◽  
Lamhot Parulian Manalu
Keyword(s):  
Mass Transfer ◽  
Thin Layer ◽  
Moisture Diffusivity ◽  
Drying Kinetics ◽  
Coefficient Of Determination ◽  
Convective Mass Transfer ◽  
Thin Layer Drying ◽  
Drying Models ◽  
Guazuma Ulmifolia ◽  
Kinetics Of

The objectives of this study were to determine a suitable thin layer drying model to describe the drying kinetics of Guazuma ulmifolia leaves and determine the mass transfer parameters of Guazuma ulmifolia leaves. The drying of Guazuma ulmifolia leaves was conducted in a laboratory scale dryer with various temperature (40oC, 50oC, and 60oC) and relative humidity (30%, 40%, 50% and 60%). Five drying models, namely, Newton, Henderson and Pabis, Page, Midilli-Kucuk, and Verma et al. were fitted to the drying data. The drying curve of guazuma leaves did not show a constant drying period during the drying period. The models suitability were compared base on coefficient of determination (R2), root square mean errors (RSME), and reduced mean square of deviation (X2). It was found that, among the models evaluated, the Midilli and Kucuk model is the best to describe the drying kinetics of Guazuma ulmifolia leaves. The effective moisture diffusivity was found to be in the range of 10-13 – 10-12 m2/s and the convective mass transfer coefficient was in the range of 10-9 – 10-10 m/s. The activation energy value was found to be 89.21 kJ/mol.

scholarly journals Modelling and characteristics of thin layer convective air-drying of thyme (Thymus vulgaris) leaves

2019 ◽  
Vol 37 (No. 2) ◽  
pp. 128-134
Author(s):  
Osman Yağız Turan ◽  
Ebru Fıratlıgil
Keyword(s):  
Thin Layer ◽  
Goodness Of Fit ◽  
Food Preservation ◽  
Moisture Ratio ◽  
Coefficient Of Determination ◽  
Thymus Vulgaris ◽  
Drying Process ◽  
Thin Layer Drying ◽  
Drying Models ◽  
Kinetics Of

Fruit and vegetable dehydration has been extensively studied for the improvement of food preservation. Effects of drying temperature on the drying kinetics of thyme were investigated and a suitable drying model was obtained to describe the drying process. Drying behaviour of thyme leaves at temperatures of 50, 60, 70 and 80°C was determined by using a conventional drying oven, and moisture ratio and drying rates were calculated. Four different thin layer drying models, namely Lewis, Henderson and Pabis, Page, and logarithmic models, were used to fit the experimental moisture ratio data. Three statistical parameters: coefficient of determination (R<sup>2</sup>), chi-square (χ<sup>2</sup>) and root mean square error (RMSE) were used to compare the goodness of fit of the drying models. Logarithmic model and Page model give the best description of the drying process kinetics of thyme leaves by comparing the experimental values and predicted values.

Evaluation of thin-layer drying models for describing drying kinetics of figs (Ficus carica)

2006 ◽  
Vol 75 (2) ◽  
pp. 205-214 ◽  
Author(s):  
Stamatios J. Babalis ◽  
Elias Papanicolaou ◽  
Nikolas Kyriakis ◽  
Vassilios G. Belessiotis
Keyword(s):  
Thin Layer ◽  
Drying Kinetics ◽  
Ficus Carica ◽  
Thin Layer Drying ◽  
Drying Models ◽  
Thin Layer Drying Models ◽  
Kinetics Of

scholarly journals Statistical prediction of the drying behavior of blanched ginger rhizomes

2021 ◽  
Vol 4 (2) ◽  
pp. 98-107
Author(s):  
A. I. Gbasouzor ◽  
J. E. Dara ◽  
C. O. Mgbemena
Keyword(s):  
Linear Regression ◽  
Moisture Content ◽  
Thin Layer ◽  
Goodness Of Fit ◽  
Drying Time ◽  
Thin Layer Drying ◽  
Non Linear ◽  
Drying Behavior ◽  
Drying Models ◽  
Thin Layer Drying Models

ARS-680 environmental chamber was employed in this study to determine the drying behavior of sliced ginger rhizomes. Blanched and unblanched treated ginger rhizomes were considered at drying temperature of 40 °C for a period of 2 – 24 h. Linear and non-linear regression analyses were employed to establish the correlation that exits between the drying time and the moisture ratio. Correlation analysis, root mean square error (RMSE) and standard error of estimate (SEE) analysis were chosen in selecting the best thin layer drying models. Higher values of determination coefficient (R2) show goodness of fit and lower values of SEE implies better correlation; and RMSE values were also utilized in determining the goodness of fit. The drying data of the variously treated ginger samples were fitted into the twelve thin layer drying models and the data obtained were fitted by multiple non-linear regression technique. Blanched treated sample exhibited a better drying behavior losing about 82.87 % moisture content compared with unbleached sample that lost about 62.03 % of moisture content. Two-term exponential drying model proved to be the most suitable model for predicting the drying behavior of ginger rhizome. The model exhibited high R2 values of 0.9349-0.9792 (which are close to unity) for both blanched and unbleached samples. Also, it recorded relatively low values of RMSE and SEE (3.6865 - 2.0896 and 3.6564-2.7486 respectively) for both treatments.  

scholarly journals Thin layer drying of zucchini in solar dryer located in Osmaniye region

2018 ◽  
Vol 12 (2) ◽  
pp. 79-85 ◽  
Author(s):  
Kamil Neyfel Çerçi ◽  
Özge Sufer
Keyword(s):  
Thin Layer ◽  
Linear Regression Analysis ◽  
Chi Square ◽  
Mathematical Expressions ◽  
Thin Layer Drying ◽  
Drying Models ◽  
Drying System ◽  
Thin Layer Drying Models ◽  
Dehydration Behavior ◽  
And Diffusion

In this study, the dehydration behavior of zucchini using solar assisted drying system was examined according to 22 thin layer drying models available in literature. The correlation coefficient (R2), chi-square (χ2) and root mean square error (RMSE) values were calculated to check the suitability of models by non-linear regression analysis. It was found that Cubic and Modified Midilli-1 models were the most suitable equations and their R2 values were calculated as 0.99963. χ2 and RMSE values of related mathematical expressions were 1.89343×10‒5, 1.91692×10‒5 and 0.01685×10‒3, 0.01721×10‒3 respectively. In addition, heat transfer, mass transfer and diffusion coefficients, which were important parameters in design of drying systems were also determined as 5.18124 W/m2°C, 1.57129×10‒7 m/s and 2.335718×10‒9 m2/s respectively.

Thin Layer Drying Process of Some Leafy Vegetables under Open Sun

2007 ◽  
Vol 13 (1) ◽  
pp. 35-40 ◽  
Author(s):  
O. P. Sobukola ◽  
O. U. Dairo ◽  
L. O. Sanni ◽  
A. V. Odunewu ◽  
B. O. Fafiolu
Keyword(s):  
Thin Layer ◽  
Effective Diffusivity ◽  
Thin Layers ◽  
Leafy Vegetables ◽  
Drying Process ◽  
Chi Square ◽  
Thin Layer Drying ◽  
Rate Period ◽  
Drying Models ◽  
Drying Curves

Open sun drying experiments in thin layers of crain-crain (CC), fever (FV) and bitter (BT) leaves grown in Abeokuta, Nigeria were conducted. The drying process took place in the falling rate period and no constant rate period was observed from the drying curves. Eight thin layer mathematical drying models were compared using the multiple determination coefficients (R2), reduced chi-square (χ2) and root mean square error (RMSE) between the observed and predicted moisture ratios. Accordingly, Midilli et al. model satisfactorily described the drying curves of the three leaves with R2 of 0.9980, χ2 of 2.0×10-4 and RMSE of 1.09×10-2 for CC leaves; R2 of 0.9999, χ2 of 2×10-6 and RMSE of 1.11×10-3 for FV leaves; and R2 of 0.9998, χ2 of 1.9×10-5 and RMSE of 3.3×10-3 for BT leaves. The effective diffusivity was found to be 52.91×10-10, 48.72×10-10 and 43.42×10-10 m2/s for CC, BT and FV leaves, respectively.

Sign in / Sign up

Export Citation Format

Share Document