scholarly journals Evaluation of Variance Components and Genetic Parameters in F1 Progenies of Coffea canephora Pierre x C. congensis Froehner

2021 ◽  
pp. 12-23
Author(s):  
Kouassi M. Ouattara ◽  
Yapo A. Antoine ◽  
Nguetta A. Simon-Pierre ◽  
Okoma M. Pamela ◽  
Gba Kossia M. Karine ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Block Design ◽  
Diploid Species ◽  
Coffea Canephora ◽  
Broad Sense ◽  
High Yield ◽  
Narrow Sense ◽  
Vegetative Traits ◽  
Additive Gene

The diploid species Coffea congensis is of interest in improving the organoleptic quality of                        C. canephora. F1 crosses of C. canephora x C. congensis named Congusta in 3 x 5 factorial design have been carried out. The work aimed to assess the genetic parameters in the hybrids in order to integrate them into the selection schemes under way in Côte d'Ivoire.  The experimental design was a randomized complete block design. Each cross was represented by a minimum of 29 plants and a maximum of 55 plants. The spacing used was 3 x 1.5 m. Male genotypes C. congensis brought little improvement in offspring regardless of their insignificant additive gene effect in the hybrids. Low heritabilities were found for vegetative vigor traits DICO, GAT and NPLA ranging from 0.13 to 0.23 in the narrow sense and from 0.18 to 0.32 in the broad sense. For production, the narrow sense heritabilities were stable during the first three years of harvest with values ​​between 0.23 and 0.25 whereas the broad sense heritability was irregular. The estimation GCA and SCA showed that all the traits except RCAR had ratio between both effects above 1. The study of correlations between traits showed insignificant correlations between production and vegetative traits, with coefficients below 0.30. However, The selection of 83 high-producing trees from 14 out of 15 studied families make it possible to create good vegetative trees linked to high yield.

scholarly journals ESTIMATION OF HETEROSIS AND GENETIC PARAMETERS FOR SOME FLOWERING AND VEGETATIVE TRAITS IN MAIZE USING THE DIALLEL CROSS METHOD

2015 ◽  
Vol 2 (2) ◽  
pp. 157-166
Author(s):  
Maamoun Ahmed Abdel-Moneam ◽  
M.S. Sultan ◽  
S.E. Sadek ◽  
M.S. Shalof
Keyword(s):  
Plant Height ◽  
Genetic Parameters ◽  
Diallel Cross ◽  
Wilt Disease ◽  
Broad Sense ◽  
Narrow Sense ◽  
Planting Dates ◽  
Vegetative Traits ◽  
Heritability Estimates ◽  
Combined Data

A diallel cross among inbred lines of maize (Zea mays L.) with medium maturity and an evaluation to estimate the genetic parameters for days to 50 % tasseling, days to 50% silking, plant and ear heights, resistance to late wilt disease, ear position were carried out. Mean squares were significant for all of the studied traits. Hybrids mean squares were highly significant for the all studied traits under both planting dates and combined analysis, except days to 50% silking. Indicating that the hybrids performance differed from planting date to another. The highest negative heterosis effect was exhibited by cross P5XP2, P6 x P2, P2 x P6, P3 x P5and P3 x P6 over better parent, crosses P5 x P2 , P6 x P2 and P2 x P6 over mid- parents and crosses P5 x P1, P3 x P2 , P4 x P2 ,P5 x P2 , P6 x P2 , P2 x P6 , P3 x P5 and P3 x P6 over check varieties for tasseling date. For days to 50% silking showed that highest significant and negative heterotic effect was exhibited by crosses P6 x P1, P6 x P2, P2 x P6, P4 x P3 and P3 x P6 over mid- parents and all crosses had highly significant and negative heterosis over check varieties, the highest significant and negative heterotic effects were reported by P6 x P1, P6 x P2, P2 x P6, P4x P3 and P3 x P6 over mid- parents and, P3 x P2, P4 x P2 reciprocal, P5 x P2, P6 x P2 and P3 x P6 over check varieties, The highest significant and positive heterotic effect was exhibited by P3 x P5 and P4 x P3 (40.35 and 37.46%) over better-parent and mid-parents respectively, P4 x P2 (13.93%) highest negative significant heterotic effect over check varieties for plant height. For ear height cross P4—P3 showed maximum negative heterosis over check varieties. For resistance to late wilt disease results regarding significant for crosses P1 x P3,P3 x P1,P1 x P4 ,P4 x P1,P1—P5 and P5 x P1 (1.522%) over mid-parents , indicating that these crosses are the best combinations for resistance to late wilt disease. For ear position , 25 crosses show highly significant and negative heterosis over better-parent value for ear position ,P4 x P3 showed maximum negative heterosis over better-parent and over mid-parents . Seven crosses show highly significant and negative heterosis over check varieties value for ear position, P6 x P4 (-8.92%) showed maximum negative heterosis over check varieties. Heritability estimates in broad sense were generally higher at combined data. In the combined data percentage of heritability in the narrow sense for studied traits ranged from 20% for plant height to 46% for days to 50% tasseling or silking. Heritability estimates were low for plant and ear heights in narrow sense (20% and 28%) and the same in broad sense (29% and 38%), respectively. Heritability estimates in broad sense were medium (29% -64%) of all studied traits. Hence it could be concluded that these crosses may be useful for improving maize grain yield program.

scholarly journals Genetic parameters and combining ability of some important traits in rice (Oryza sativa L.)

Genetika ◽  
2017 ◽  
Vol 49 (3) ◽  
pp. 1001-1014 ◽  
Author(s):  
Hasanalideh Haghighi ◽  
Ezatollah Farshadfar ◽  
Mehrzad Allahgholipour
Keyword(s):  
Combining Ability ◽  
Genetic Parameters ◽  
Amylose Content ◽  
Oryza Sativa L ◽  
Block Design ◽  
Regression Line ◽  
Diallel Cross ◽  
Combining Ability Analysis ◽  
Additive Gene ◽  
F2 Generation

In order to study the combining ability, genetic parameters and gene actions of yield, yield components and quality characters in rice, fifteen F2 generation of a 6?6 diallel cross, excluding reciprocals, was grown in a randomized complete block design (RCBD) with three replications. The results of analysis of variance showed significant differences between the genotypes for grain yield (GY), 100-grain weight (HGW), number of panicles per plant (PN), panicle length (PL), number of full grains per panicle (FGN) and for quality characters including amylose content (AC) and gel consistency (GC). The results of combining ability analysis revealed that general combining ability (GCA) and specific combining ability (SCA) were significant for characters GY, FGN, GC, AC, HGW and PN indicating the involvement of additive and non-additive effects in their inheritance, however high amounts of Bakers ratio remarked that additive gene effect had more portion in controlling these traits. The best combiners for GY, HGW, FGN, PN and PL, were RI18447-2, IR 50, Daylamani, RI18430-46 and Daylamani respectively. For AC and GC, the best combiner was Daylamani. Hayman's graphs showed that regression line passed below the origin cutting Wr axis in the negative region for HGW, PN, PL and GC, indicating the presence of over dominance. Estimates of genetic parameters showed significant amount of H1 and H2, and non-significant amount of D for the characters GY, PN, PL and GC, which confirmed the existence of dominance in the inheritance of these traits.

scholarly journals Evaluating Genetic Parameters and Combining Ability of Starch Viscosity Parameters in Rice Cultivars (Oryza sativa L.)

2019 ◽  
Vol 7 (4) ◽  
pp. 665
Author(s):  
Alireza Haghighi Hasanalideh ◽  
Mehrzad Allahgholipour ◽  
Ezatollah Farshadfar
Keyword(s):  
Combining Ability ◽  
Gene Action ◽  
Oryza Sativa L ◽  
Block Design ◽  
Breeding Methods ◽  
Narrow Sense ◽  
Narrow Sense Heritability ◽  
Gene Effects ◽  
Diallel Mating Design ◽  
Additive Gene

This study was undertaken to assess the combining ability of 6 rice varieties, for viscosity parameters and determining gene action controlling Rapid Visco Analyser (RVA) characters. F2 progenies derived from a 6×6 half diallel mating design with their parents were grown in a randomized complete block design with three replications at the research farm of Rice Research Institute of Iran (RRII) in 2015. The diallel analysis by Griffing`s method indicated the involvement of additive and non-additive gene actions controlling RVA traits. For traits PV and FV RI18447-2 and IR50 were the best combiners for increasing and decreasing, respectively. Deylamani and IR50 were the best combiners for increasing and decreasing BV, respectively. Beside, due to more portion of non-additive gene action in controlling trait SV, The Gilaneh × RI18430-46, and Deylamani × RI18430-46 crosses were the best for increasing and decreasing SV, respectively. The high estimates of broad sense heritability and narrow sense heritability for BV and FV, indicated the importance of additive effects in expression of these traits. Therefore, selection base breeding methods will be useful to improve these traits and selection in the early generations could be done to fix the favourable genes. Low estimate of narrow sense heritability for SV revealed that non-additive gene effects play important role in controlling setback viscosity. So, hybrid base breeding methods will be useful to improve this trait.

Inheritance of seed protein and seed oil content in early maturing soybean

1985 ◽  
Vol 27 (5) ◽  
pp. 603-607 ◽  
Author(s):  
Anne L. McKendry ◽  
Peter B. E. McVetty ◽  
Harvey D. Voldeng
Keyword(s):  
Seed Oil ◽  
Seed Protein ◽  
Gene Action ◽  
Broad Sense ◽  
Narrow Sense ◽  
Additive Gene Action ◽  
Narrow Sense Heritability ◽  
Partial Dominance ◽  
Early Maturing ◽  
Additive Gene

The inheritance of seed protein, seed oil, and the sum of protein and oil was investigated in two early maturing soybean crosses, 'Maple Presto' × 'Sioux' and 'Maple Presto' × X446-2-1, in 2 years (1981 and 1982) at one location (Winnipeg). Analyses of variance of the parental performance over years indicated that the parents differed significantly for all three traits studied and that genotype by year interactions were effectively zero. Generation means analysis indicated that gene action for seed protein was primarily additive, with partial dominance for low protein. Seed oil was also conditioned primarily by additive gene action. Partial dominance was not consistently detected over years and therefore was of minor importance. Additive × additive epistatic effects for seed oil were also detected but were not consistent over years. The sum of seed protein and oil was conditioned solely by additive gene action. Variance analyses indicated a predominance of additive genetic variance for all three traits. Dominance variance was also detected for both seed protein and the sum of protein and oil. Broad sense heritability for the F2 generation ranged from 76 to 83% for seed protein and from 68 to 86% for the sum of protein and oil, while narrow sense heritability ranged from 34 to 72% for seed protein and from 39 to 65% for the sum of protein and oil. Narrow sense heritability values equalled broad sense values for seed oil and ranged from 58 to 68%. Heritability was also estimated from standard unit parent – progeny regression analyses and values for all three traits were found to approach the variance analyses estimated broad sense heritabilities. Comparisons with the results of late maturing soybean crosses are made and implications of the results obtained in this study on early maturing soybean breeding programs are discussed.Key words: Glycine max, heritability, 00 and 000 maturity groups, breeding strategies.

scholarly journals Parameter Genetik dan Deteksi Segregan Transgresif pada Populasi Kacang Tanah (Arachis hypogaea L.) Generasi F3

2017 ◽  
Vol 45 (2) ◽  
pp. 162 ◽  
Author(s):  
Siti Nurhidayah ◽  
Yudiwanti Wahyu ◽  
Dan Willy Bayuardi Suwarno
Keyword(s):  
Gene Action ◽  
Block Design ◽  
Continuous Distribution ◽  
High Yield ◽  
Arachis Hypogaea L ◽  
Additive Gene ◽  
High Heritability ◽  
Genetic Coefficient Of Variation ◽  
Transgressive Segregants ◽  
Genetic Coefficient

<p align="center"><strong>ABSTRACT</strong></p>Selection of transgressive segregants is considered as one effective way of obtaining peanut genotypes with high yield on early segregation. The objective of the study was to estimate genetic parameters and to identify transgressive segregants of peanut family in F3 generation. The experiment was conducted at Leuwikopo, Dramaga, Bogor on August-Desember 2014. The genetic materials evaluated were 218 family F3 generation from 5 biparental population (Jerapah/GWS79A1, GWS79A1/Zebra, GWS79A1/Jerapah, Zebra/GWS79A1 and Zebra/GWS18) and 4 commercial varieties as checks (Gajah, Jerapah, Sima, and Zebra). The experiment was conducted in an augmented randomized complete block design with 4 replications for the checks. The results showed that quantitative characters had continuous distribution and they were controlled by many genes with additive, dominance, complementary epistasis, or additive epistasis gene action. Total number of pod and number of pod had high heritability and moderate genetic coefficient of variation. Selection with 10% intensity showed that 22 families had large total number of pods while six families had larger total number of pods than both parents. Family U2-39 estimated was identified as a putative transgressive segregant with high total number of pod and had smaller variance within family than Sima variety. <br /><br />Keywords: additive,gene action, heritability, GCV

scholarly journals Heritability estimation in early generations of two-way crosses in soybean

Bragantia ◽  
2008 ◽  
Vol 67 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Marcelo Marchi Costa ◽  
Antonio Orlando Di Mauro ◽  
Sandra Helena Unêda-Trevisoli ◽  
Nair Helena Castro Arriel ◽  
Ivana Marino Bárbaro ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Genetic Variance ◽  
Selection Process ◽  
Broad Sense ◽  
Selection Methods ◽  
Narrow Sense ◽  
Breeding Programs ◽  
Heritability Estimation ◽  
The Family ◽  
Simple Selection

The estimation of genetic parameters, especially in early generations, is very useful for directing the selection process in breeding programs. The present research was undertaken to estimate heritabilities in the broad sense, narrow sense and using parent-offspring regression in F3 soybean populations from six two-way crosses, originated from the Soybean Breeding Program of Faculdade de Ciências Agrárias e Veterinárias (UNESP), Jaboticabal campus. It was used the family design with common checks located ten plots apart. It was observed highly significant differences among families. The experimental coefficient of variation (CVe), the CVg/CVe ratio and the heritability showed wide variation among traits, being the highest values found for number of pods, number of seeds and grain yield, making evident the existence of variance to be exploited by breeding. The estimation of the heritability coefficients in the broad sense, narrow sense and by regression were close in most of the situations, showing that the largest part of genetic variance is of additive nature, in which simple selection methods can lead to satisfactory genetic gains.

scholarly journals Associations between vegetative and production traits in guava tree full-sib progenies

2017 ◽  
Vol 52 (5) ◽  
pp. 303-310 ◽  
Author(s):  
Paulo Ricardo dos Santos ◽  
Sandra da Costa Preisigke ◽  
Alexandre Pio Viana ◽  
Natan Ramos Cavalcante ◽  
Carlos Misael Bezerra de Sousa ◽  
...  
Keyword(s):  
Genetic Correlation ◽  
Genetic Parameters ◽  
Correlation Coefficients ◽  
Psidium Guajava ◽  
High Yield ◽  
Production Traits ◽  
Canonical Correlations ◽  
Canopy Volume ◽  
Vegetative Traits ◽  
Fruit Mass

Abstract: The objective of this work was to estimate the genetic parameters and to evaluate the associations between vegetative and yield characteristics, in full-sib progenies of guava tree (Psidium guajava). The following characteristics were evaluated: yield per plant, number of fruits, fruit mass, plant height, stem diameter, and canopy volume. The estimation of genetic parameters was obtained by the REML/Blup procedure. Based on the breeding values predicted by Blup, the genetic and canonical correlations were estimated, and the genetic correlation coefficients were unfolded into direct and indirect effects on the character yield per plant using path analysis. Genetic variability was estimated for number of fruits (567.66) and yield per plant (11.818), with high genetic correlation (0.9045), indicating simultaneous selection. Indirect selection did not promote simultaneous gains for yield per plant with the primary components number of fruits and fruit mass, making it difficult to obtain guava cultivars with high yield, number of fruits, and fruit mass. The vegetative traits had little effect on yield, number of fruits, and fruit mass.

scholarly journals Vegetative development and production of ‘Tahiti’ acid lime clone selections grafted on different rootstocks

2020 ◽  
Vol 42 (3) ◽  
Author(s):  
Andréia Lopes de Morais ◽  
Moises Zucoloto ◽  
Renan Garcia Malikouski ◽  
Dimmy Herllen Silveira Gomes Babosa ◽  
Orlando Sampaio Passos ◽  
...  
Keyword(s):  
Block Design ◽  
Productive Efficiency ◽  
Vegetative Development ◽  
Randomized Block Design ◽  
Vegetative Traits ◽  
Citrus Production ◽  
Acid Lime ◽  
Cultivated Species ◽  
Swingle Citrumelo

Abstract Brazil accounts for a large percentage of the world’s citrus production, with ‘Tahiti’ acid lime tree standing out among several cultivated species. However, its cultivation is supported by a very narrow genetic base, being composed of few scion and rootstock options. In this way, the aim of this study was to evaluate the vegetative development and production of twelve ‘Tahiti’ acid lime clones on two rootstocks. The experiment was carried out at Fazenda José Guarete, municipality of São Mateus – ES. A randomized block design was used in the split plot scheme, with plot consisting of two rootstocks and subplot of the twelve ‘Tahiti’ acid lime clones. Traits evaluated were: vegetative development, production and productive efficiency, internal and external quality of fruits. Bello Fruit, Iconha, BRS Passos, Itarana, Persian 58, CNPMF 5059 and Elédio clones were superior in terms of production, vegetative traits and fruit quality. ‘Swingle’ citrumelo rootstock showed higher values for vegetative traits compared to ‘Riverside’ citrandarin. The clone and rootstock combinations that provided better agronomic performance in this study were BRS Passos, Bello Fruit, Elédio and Iconha grafted on ‘Swingle’ citrumelo and CNPMF 5059, Iconha and Elédio grafted on ‘Riverside’ citrandarin.

scholarly journals Yield and quality of tomato grown in a hydroponic system, with different planting densities and number of bunches per plant

2018 ◽  
Vol 48 (4) ◽  
pp. 340-349 ◽  
Author(s):  
Flávio Barcellos Cardoso ◽  
Herminia Emilia Prieto Martinez ◽  
Derly José Henriques da Silva ◽  
Carla do Carmo Milagres ◽  
José Geraldo Barbosa
Keyword(s):  
Fruit Quality ◽  
Plant Density ◽  
Irrigation System ◽  
Block Design ◽  
Total Yield ◽  
Fresh Mass ◽  
Planting Density ◽  
High Yield ◽  
Hydroponic System

ABSTRACT Obtaining a high yield of good quality fruits is one of the main challenges of the tomato crop. The enhancement in plant density promotes a reduction in the fruit fresh mass and an increase the yield per area. On the other hand, commercialization parameters take into account number and fresh mass of fruits. This study aimed at evaluating the yield and fruit quality of indeterminate growth hybrid tomato (Rebeca), cultivated in a hydroponic system, with different planting densities and number of bunches per plant. The experiment was conducted under greenhouse conditions, in a sub-irrigation system containing expanded clay as substrate. A split-plot randomized block design, with three replications, was used. In the plots, four planting densities (11.1 plants m-2, 8.3 plants m-2, 6.6 plants m-2 and 5.5 plants m-2) were allocated and, in the subplots, the number of bunches per plant (one or two). The total yield was influenced by the interaction planting density x number of bunches per plant. The treatment that allowed the highest yield was 11.1 plants m-2 with two bunches, with 22.61 kg m-2 or 226.1 t ha-1, in a crop cycle of 134 days. The observed variations for the nutrient contents of leaves and fruits of tomato plants with one or two bunches, at densities of 5.5-11.1 plants m-2, do not compromise the fruit quality nor influence the production of tradable fruits, using the hydroponic system.

scholarly journals ANALYSIS OF GENETIC PARAMETERS FOR BEAN PHYSICAL QUALITY CHARACTERS AND CLUSTERIZATIONS OF ELEVEN GENOTYPES OF ROBUSTA COFFEE (Coffea canephora)

2013 ◽  
Vol 14 (2) ◽  
pp. 55
Author(s):  
Rubiyo Rubiyo ◽  
Edi Wardiana
Keyword(s):  
Coefficient Of Variation ◽  
Genetic Parameters ◽  
Block Design ◽  
Coffea Canephora ◽  
Direct Selection ◽  
Genetic Advance ◽  
Physical Quality ◽  
Robusta Coffee ◽  
Randomized Complete Block Design ◽  
Genotypic Coefficient Of Variation

The genetic parameters of coffee related to their bean physical quality characters are important for breeder to improve the  bean quality. Eleven genotypes of robusta coffee were identified and their genetic relationship to the bean physical quality were characterized. The research was conducted at coffee plantation of the Association of Indonesian Coffee Exporters in West Lampung, altitude of 800 m above sea level, Latosol type of soil, and A type of climate, starting from 2010 to 2012. The objectives of this study were to estimate the genotypic coefficient of variation, heritability and genetic advance of the bean physical quality characters, and clusterization analysis of eleven genotypes of robusta coffee. A randomized complete block design with eleven treatments of coffee genotypes and three replications was used in this study. The results showed that the estimated values of genotypic coefficient of variation, heritability and genetic advance for small-size normal bean characters of robusta coffee were very high, so the genetic improvement for these characters has a high probability of success by direct selection. Clusterization of the genotypes resulted three clusters with their respective characteristics. The study implies that future breeding program especially for hybridization should be conducted between genotypes arising from different clusters to obtain the possible high heterosis effects.<br /><br />

Sign in / Sign up

Export Citation Format

Share Document