scholarly journals Tuning the Morphology of Ag3PO4 Photocatalysts with an Elevated Concentration of KH2PO4

2019 ◽  
Vol 14 (3) ◽  
pp. 625 ◽  
Author(s):  
Khusnul Afifah ◽  
Roy Andreas ◽  
Dadan Hermawan ◽  
Uyi Sulaeman
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
High Photocatalytic Activity ◽  
Elevated Concentration ◽  
X Ray Diffraction ◽  
X Ray ◽  
Defect Sites ◽  
Excellent Photocatalytic Activity

Tuning the morphology of Ag3PO4 photocatalysts with an elevated concentration of KH2PO4 have been successfully conducted. This photocatalyst was prepared by starting material of AgNO3 and KH2PO4.  The KH2PO4 aqueous solution with five concentrations of 0.10 M, 0.15 M, 0.30 M, 0.45 M, and 0.60 M was reacted with AgNO3 aqueous solution. The products were characterized using X-ray Diffraction (XRD), UV-Vis Diffuse Reflectance Spectroscopy (DRS), and Scanning Electron Microscopy (SEM). The concentration of KH2PO4 significantly affected the morphology, size, and crystallinity of catalyst. The morphology of Ag3PO4 may be tuned with the synthesis using an elevated concentration of KH2PO4. The sample with the synthesis using 0.15 M of KH2PO4 exhibited the excellent photocatalytic activity. The high photocatalytic activity was caused by the small size of mixed morphology of sphere and tetrahedron, high crystallinity and defect sites. Copyright © 2019 BCREC Group. All rights reserved 

Effect of Ag+ and PO43− ratios on the microstructure and photocatalytic activity of Ag3PO4

2016 ◽  
Vol 09 (05) ◽  
pp. 1650063 ◽  
Author(s):  
Jiaqian Qin ◽  
Xinyu Zhang ◽  
Chengwu Yang ◽  
Aijun Song ◽  
Bing Zhang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Diffuse Reflectance ◽  
Photocatalytic Performance ◽  
Diffuse Reflectance Spectroscopy ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible ◽  
The Rich

In this work, the catalyst silver phosphate (Ag3PO[Formula: see text] with different initial ratios of Ag[Formula: see text] and PO[Formula: see text] in aqueous solution was synthesized by a simple precipitation method from AgNO3 and NH4H2PO4 which were used as the precursor. After that, the prepared samples were characterized by different techniques such as field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (UV-DRS) and decomposition evolution of rhodamine B (RhB) solution. The results indicate that the initial ratios of Ag[Formula: see text]/PO[Formula: see text] in aqueous solution can modify the morphology and also it can significantly affect the photocatalytic performance. During photocatalytic process, the rich Ag[Formula: see text] ion Ag3PO4 can form the surface plasmon resonance (SPR) of Ag nanoparticles, which inhibit the reduction of Ag3PO4 resulting in higher photocatalytic activity and stability.

scholarly journals Synthesis of g-C3N4/InVO4 materials as novel photocatalysts for degradation of antibiotics under visible light

2021 ◽  
Vol 10 (2) ◽  
pp. 49-53
Author(s):  
Tung Mai Hung Thanh ◽  
Dong Thanh Dong ◽  
Quoc Nguyen Tri ◽  
The Do Minh ◽  
Phuong Tran Thi Thu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Infrared Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Weight Ratio ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Excellent Photocatalytic Activity ◽  
Visible Irradiation

Novel g-C3N4/InVO4 materials were synthesized by a fabricated via hydrothermal and heating methods. The physicochemical properties of the photocatalysts were investigated by X-ray diffraction (XRD), infrared spectroscopy (IR),  Photoluminescence spectroscopy (PL), UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS) and Energy dispersive X-ray spectroscopy (EDX). The photocatalytic performances were evaluated by degradation of tetracycline (TC). The g-C3N4/InVO4 composite at a weight ratio of 10 % exhibited the most excellent photocatalytic activity for TC degradation under visible irradiation which was more active than that of pure components.

Preparation of Nanoparticulate ErFeO3 by Microwave Assisted Process and its Photocatalytic Activity

2014 ◽  
Vol 809-810 ◽  
pp. 140-143 ◽  
Author(s):  
Chao Wan Tang ◽  
Jia Ni Ying ◽  
Dong Jing Ni ◽  
Qian Yang ◽  
Li Mei Wu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Single Phase ◽  
Diffuse Reflectance Spectroscopy ◽  
High Photocatalytic Activity ◽  
Experimental Simulation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible

Using Er (NO3)3·5H2O and Fe (NO3)3·9H2O as major materials, the ErFeO3 nanoparticles were prepared by successive microwave processing and high temperature calcination. The samples were characterized by thermogravimetric and differential thermal analysis (TG-DTA), powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible diffuse reflectance spectroscopy (DRS). It was found that the single phase ErFeO3 can be obtained through the calcination of microwave processed ErFeO3 precursors at 800°C, and the resulting product was approximation flake of 20-80 nm. The visible-light photocatalytic activity of ErFeO3 nanoparticles was investigated in experimental simulation wastewater containing 10 mg/L methyl orange (MO). The results show that ErFeO3 nanoparticles appear high photocatalytic activity for the decomposition of MO under visible-light irradiation.

Molten Salt Synthesis of SnS2 Nanoparticles with Visible-Light Driven Photocatalytic Activity for the Degradation of Rhodamine B

2015 ◽  
Vol 655 ◽  
pp. 203-207 ◽  
Author(s):  
Tie Kun Jia ◽  
Guang Sun ◽  
Jian Liang Cao ◽  
Zhan Ying Zhang
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Molten Salt ◽  
Diffuse Reflectance ◽  
High Photocatalytic Activity ◽  
Molten Salt Synthesis ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Visible Light Driven

SnS2 nanoparticles with perfectly crystalline morphology were synthesized via a molten salt synthesis route at a relatively low temperature. The resulting SnS2 nanoparcticles were characterized by X-ray diffraction (XRD), field scanning electron microscopy (FESEM), and UV-vis diffuse reflectance spectra (UV-vis). The observations of FESEM images showed that the sample consists of a large number of aggregates assembled with numerous nanoparticles packed into compact texture. The photocatalytic activity of the as-prepared SnS2 samples was evaluated by the degradation of RhB aqueous solution. The effect of the molar ratio of thiourea to SnCl2 on the photocatalytic activity was also investigated, and the result showed that the as-prepared SnS2 sample has high photocatalytic activity efficiency in the degradation of RhB aqueous solution when the molar ratio of thiouea to SnCl2 was 3.

Visible-Light-Induced Photocatalytic Activity of Boron-Doped BiVO4

2014 ◽  
Vol 809-810 ◽  
pp. 890-894
Author(s):  
Dan Li ◽  
Lian Wei Shan ◽  
Gui Lin Wang ◽  
Li Min Dong ◽  
Wei Li ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Reflectance Spectroscopy ◽  
Scheelite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Boron Doped

Boron-BiVO4 samples were synthesized by sol-gel method. They were characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction. Photocatalytic activity of the obtained BiVO4 samples was investigated through degrading methylene blue (MB). The results reveal that boron-BiVO4 catalysts have monoclinic scheelite structure. The BiVO4 and Co-BiVO4 photocatalysts were responsive to visible light. Co-BiVO4 photocatalyst showed higher photocatalytic activity than pure BiVO4, resulting in the significantly improved efficiency of degradation of MB.

Synthesis and Photocatalytic Properties of Flower-Like ZnIn2S4 Microspheres by a Solvothermal Method

2014 ◽  
Vol 881-883 ◽  
pp. 1101-1104 ◽  
Author(s):  
Min Jie Zhou ◽  
Peng Cui
Keyword(s):  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Diffuse Reflectance ◽  
Solvothermal Method ◽  
Diffuse Reflectance Spectroscopy ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

In this work, flower-like ZnIn2S4 microspheres were synthesized using a solvothermal method. The as-synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and ultraviolet-visible diffuse reflectance spectroscopy (DRS) techniques. The photocatalytic activity of the ZnIn2S4 microspheres was investigated. The ZnIn2S4 microspheres exhibit much higher photocatalytic activity than pure P25 TiO2.

Synthesis of ZnO Crystals with High Photocatalytic Activity by a Facile Solution Route

2011 ◽  
Vol 374-377 ◽  
pp. 919-922
Author(s):  
Juan Xie ◽  
Li Bian ◽  
Yan Xie ◽  
Zhi Yong Liu ◽  
Wei Zhao
Keyword(s):  
Photocatalytic Activity ◽  
Diffuse Reflectance ◽  
Particle Morphology ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Close Relationship ◽  
Solution Route ◽  
Temperature Scanning ◽  
Degradation Of Methyl Orange

ZnO crystals with different morphologies were successfully prepared via a simple solution route at low temperature. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV-Vis diffuse reflectance spectra (UV-Vis DRS) were used to characterize the products. Photocatalysis of the as-prepared ZnO crystals was evaluated by degradation of methyl orange in an aqueous solution exposed to ultraviolet light. Results suggested a close relationship between the photocatalytic activity and the particle morphology and size.

Preparation of Nanoparticulate YFeO3 by Ultrasonic Assisted Method and its Visible-Light Photocatalytic Properties

2014 ◽  
Vol 636 ◽  
pp. 7-10 ◽  
Author(s):  
Pei Song Tang ◽  
Chao Wan Tang ◽  
Jia Ni Ying ◽  
Dong Jing Ni ◽  
Qian Yang ◽  
...  
Keyword(s):  
Visible Light ◽  
Diffuse Reflectance ◽  
Optical Band Gap ◽  
Diffuse Reflectance Spectroscopy ◽  
High Photocatalytic Activity ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ultrasonic Assisted ◽  
Uv Visible

Using Fe (NO3)3⋅9H2O, Y(NO3)3⋅6H2O and citric acid as the main raw material, the YFeO3 nanoparticles were synthesized by ultrasonic assisted process and calcination. The YFeO3 nanoparticles were characterized by thermogravimetry and differential thermal analysis (TG-DTA), powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible diffuse reflectance spectroscopy (DRS). The results show that the perovskite structureYFeO3 (YFeO3-800) can be obtained through the calcination of ultrasonic processed YFeO3 precursors at 800 °C, and the resulting product has a particle size of 70 nm and an optical band gap of 2.0 eV. Consequently, the YFeO3-800 nanoparticles show high photocatalytic activity for decomposition of methyl orange under visible-light irradiation.

scholarly journals Synthesis and photocatalytic activity of ZnO/CuO composite for the degradation of methyl blue under vilsible light iradiation

2020 ◽  
Vol 9 (3) ◽  
pp. 94-100
Author(s):  
Kim Nguyen Van ◽  
Nga Nguyen Thi Viet ◽  
Tuyen Vo Thi Thanh ◽  
Vien Vo
Keyword(s):  
Photocatalytic Activity ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Photogenerated Electron ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Microwave System ◽  
Direct Formation

Composite ZnO/CuO was prepared by direct formation of ZnO from Zn(OOCCH3)2 precursor in the presence of CuO with the assistant of the microwave system. The obtained composite was characterized by X-Ray Diffraction (XRD) and Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV-vis DRS), which shows that the composite with a bandgap of 3.27 eV contains two components, ZnO and CuO. The photocatalytic activity of ZnO/CuO was assessed by the degradation of methylene blue (MB) in water under visible light, shows that the photocatalytic activity for the ZnO/CuO composite was remarkably improved compared to single ZnO and CuO. This result is attributed to the reduced recombination rate of photogenerated electron-hole pairs by the presence of CuO in the composite, therefore photocatalysis activity increases.

Characterization and Photocatalytic Activity of Microspheres ZnO by Hydrothermal Method

2019 ◽  
Vol 814 ◽  
pp. 487-492
Author(s):  
Xi Hao Lin ◽  
Pei Song Tang ◽  
Bei Bei Wang ◽  
Hai Qiang Tang
Keyword(s):  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Hydrothermal Method ◽  
Diffuse Reflectance Spectroscopy ◽  
Raw Materials ◽  
Average Diameter ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
Excellent Photocatalytic Activity ◽  
Ultraviolet Light Irradiation

Using zinc acetate, glycerol alcohol and sodium hydroxide as principal raw materials, the ZnO microspheres were prepared by hydrothermal method at 200°C. The samples were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and diffuse reflectance spectroscopy (DRS). Using methyl orange as the degradation object, the photocatalytic activities and recycling stability of ZnO were characterized. The results show that ZnO samples are spherical and the average diameter is approximately 3-4μm. Moreover, the bandgap width is 3.1eV. Under ultraviolet light irradiation, it is testified that ZnO shows a excellent photocatalytic activity for the degradation of methyl orange. From experience, we can draw a conclusion that the ZnO samples were in line with first-order kinetics, with an apparent rate constant of 0.016min-1. At the same time, ZnO showed excellent recycling performance. Although the samples have been recycled three times, it still maintained high photocatalytic activity.

Sign in / Sign up

Export Citation Format

Share Document