scholarly journals Functionalized Porous Nanoscale Fe3O4 Particles Supported Biochar From Peanut Shell For Pb(II) Ions Removal From Landscape Wastewater

2021 ◽  
Author(s):  
Xiaojun Jin ◽  
Renrong Liu ◽  
Huifang Wang ◽  
Li Han ◽  
Muqing Qiu ◽  
...  
Keyword(s):  
Heavy Metal ◽  
High Efficiency ◽  
Adsorption Process ◽  
Low Cost ◽  
Agricultural Waste ◽  
Maximum Adsorption Capacity ◽  
Complexation Reaction ◽  
Order Kinetic ◽  
Peanut Shell ◽  
Adsorption Mechanisms

Abstract The large amounts of heavy metal from landscape wastewater have become serious problems of environmental pollution and risks for human health. It affects the growth of plant and aquatic, and leads to the destruction of landscape. Therefore, the development of efficient novel adsorbent is a very important for treatment of heavy metal. A low-cost and easily obtained agricultural waste (Peanut Shell) was modified by nanoscale Fe3O4 particles. Then, the functionalized porous nanoscale Fe3O4 particles supported biochar from peanut shell (PS-Fe3O4) for removal of Pb(II) ions from aqueous solution was investigated. The characterization of PS-Fe3O4 composites showed that PS from peanut shell was successfully coated with porous nanoscale Fe3O4 particles. The pseudo second-order kinetic model and Langmuir model were more fitted for describing the adsorption process of Pb(II) ions in solution. The maximum adsorption capacity of Pb(II) ions removal in solution by PS-Fe3O4 composites could reach 188.68 mg/g. The adsorption process of Pb(II) ions removal by PS-Fe3O4 composites was a spontaneous and endothermic process. The adsorption mechanisms of Pb(II) ions by PS-Fe3O4 composites were mainly controlled by the chemical adsorption process. They included Fe-O coordination reaction, co-precipitation, complexation reaction and ion exchange. PS-Fe3O4 composites were thought as a low-cost, good regeneration performance and high efficiency adsorption material for removal of Pb(II) ions in solution.

Potential of Agricultural Waste Material (Ananas cosmos) as Biosorbent for Heavy Metal Removal in Polluted Water

2020 ◽  
Vol 1010 ◽  
pp. 489-494
Author(s):  
Abdul Hafidz Yusoff ◽  
Rosmawani Mohammad ◽  
Mardawani Mohamad ◽  
Ahmad Ziad Sulaiman ◽  
Nurul Akmar Che Zaudin ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Adsorption Capacity ◽  
Metal Removal ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Pineapple Peel

Conventional methods to remove heavy metals from polluted water are expensive and not environmentally friendly. Therefore, this study was carried out to investigate the potential of agricultural waste such as pineapple peel (Ananas Cosmos) as low-cost absorbent to remove heavy metals from synthetic polluted water. The results showed that Cd, Cr and Pb were effectively removed by the biosorbent at 12g of pineapple peels in 100 mL solution. The optimum contact time for maximum adsorption was found to be 90 minutes, while the optimum pH for the heavy metal’s adsorption was 9. It was demonstrated that with the increase of adsorbent dosage, the percent of heavy metals removal was also increased due to the increasing adsorption capacity of the adsorbent. In addition, Langmuir model show maximum adsorption capacity of Cd is 1.91 mg/g. As conclusions, our findings show that pineapple peel has potential to remove heavy metal from polluted water.

scholarly journals Adsorption of Cr(VI) and Cu(II) from aqueous solutions by biochar derived from Chaenomeles sinensis seed

2019 ◽  
Vol 80 (12) ◽  
pp. 2260-2272 ◽  
Author(s):  
Xiaoling Hu ◽  
Jianyang Song ◽  
Hongyu Wang ◽  
Wei Zhang ◽  
Bin Wang ◽  
...  
Keyword(s):  
Heavy Metal ◽  
High Efficiency ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Heavy Metal Remediation ◽  
Chaenomeles Sinensis ◽  
Wide Ph Range ◽  
Different Temperatures ◽  
Isotherms And Thermodynamics ◽  
Ph Range

Abstract In order to utilize the discarded Chaenomeles sinensis seed (CSS) and develop low-cost biochar for heavy metal pollution control, this study pyrolyzed CSS to prepare biochar at three different temperatures (300, 450 and 600 °C). The physicochemical properties of CSS biochar such as elemental composition, surface area, surface morphology and surface functional groups were characterized. Its adsorption properties including kinetics, isotherms and thermodynamics were studied. The results showed that the adsorption equilibrium was reached at 5 h, which was relatively fast. CSS biochar prepared at 450 °C (CSS450) had the maximum adsorption capacity for Cr(VI) and Cu(II), which was 93.19 mg/g and 105.12 mg/g, respectively. The thermodynamic parameter ΔG0 < 0 and the isotherm parameter RL between 0 and 1 all revealed the feasibility and spontaneity of the adsorption process. The removal of Cr(VI) exhibited high efficiency in a wide pH range (1–10), while the removal of Cu(II) was pH-dependent and optimal at pH = 6. The coexisting ions in the solution showed slight inhibition of the adsorption of Cr(VI) and Cu(II). Additionally, Cu(II) exhibited better affinity for CSS450 than Cr(VI) in dynamic adsorption. This is the first study to prepare biochar from CSS and confirms its potential application for heavy metal remediation.

scholarly journals Facile preparation and highly efficient sorption of magnetic composite graphene oxide/Fe3O4/GC for uranium removal

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Aili Yang ◽  
Zhijun Wang ◽  
Yukuan Zhu
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
High Efficiency ◽  
Removal Rate ◽  
Low Cost ◽  
Hydrothermal Carbonization ◽  
Maximum Adsorption Capacity ◽  
Magnetic Composite ◽  
Order Kinetic

AbstractIn this work, we reported for the first time a novel magnetic composite graphene oxide/Fe3O4/glucose-COOH (GO/Fe3O4/GC) that was facilely prepared from glucose through the hydrothermal carbonization and further combination with graphene oxide (GO). The chemical and structural properties of the samples were investigated. By the batch uranium adsorption experiments, the magnetic composite GO/Fe3O4/GC exhibits an excellent adsorption performance and fast solid–liquid separation for uranium from aqueous solution. GO/Fe3O4/GC (the maximum adsorption capacity (Qm) was 390.70 mg g−1) exhibited excellent adsorption capacity and higher removal rate (> 99%) for U(VI) than those of glucose-COOH (GC) and magnetic GC (MGC). The effect of the coexisting ions, such as Na+, K+, Mg2+, Ca2+, and Al3+, on the U(VI) removal efficiency of GO/Fe3O4/GC was examined. The equilibrium sorption and sorption rate for the as-prepared adsorbents well fit the Langmuir model and pseudo second-order kinetic model, respectively. The thermodynamic parameters (ΔH0 = 11.57 kJ mol−1 and ΔG0 < 0) for GO/Fe3O4/GC indicate that the sorption process of U(VI) was exothermic and spontaneous. Thus, this research provides a facile strategy for the preparation of the magnetic composite with low cost, high efficiency and fast separation for the U(VI) removal from aqueous solution.

scholarly journals Removal of Fast Green FCF dye from aqueous solutions using Flower Gel as a low-cost adsorbent

2017 ◽  
Vol 77 (5) ◽  
pp. 1213-1221
Author(s):  
Sara Abdi ◽  
Masoud Nasiri
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Process ◽  
Low Cost ◽  
Microscopic Analysis ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Fast Green ◽  
Order Kinetic Model ◽  
Fast Green Fcf

Abstract The purpose of this study was to investigate the removal of Fast Green FCF dye from aqueous solutions using Flower Gel in a batch adsorption process. The effect of different parameters such as pH, contact time, adsorbent dosage, stirrer speed and temperature were studied, and various isotherms including Langmuir, Freundlich and Tempkin were applied. The adsorbent characteristics were determined by microscopic analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction and ultraviolet-visible (UV-vis) spectrophotometry. The results showed that the equilibrium experimental data fitted well to the Langmuir isotherm and the maximum adsorption capacity for this adsorbent was 58.82 mg/g. The adsorption kinetic data followed the pseudo-second-order kinetic model and the thermodynamic parameters of the adsorption, such as Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°), showed that the Fast Green FCF adsorption process by Flower Gel was spontaneous and exothermic in nature.

scholarly journals Fast adsorption of phosphate (PO4−) from wastewater using glauconite

2019 ◽  
Vol 80 (9) ◽  
pp. 1643-1653
Author(s):  
Hassan Younes ◽  
Hani Mahanna ◽  
Hisham Kh. El-Etriby
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Complete Removal ◽  
Phosphate Removal ◽  
Bet Surface Area ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Irreversible Adsorption ◽  
Order Kinetic Model ◽  
Adsorption Desorption

Abstract In this study, the removal of phosphate (PO4−) from wastewater using glauconite was investigated. Glauconite was characterized by N2 adsorption–desorption isotherm, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis, and Fourier transform infrared (FTIR) spectroscopy. The effects of contact time, pH, initial phosphate concentrations, adsorbent dose, and temperature were investigated by batch experiments. The isotherms, kinetics and thermodynamics for phosphate removal were studied. The results showed that glauconite had a rough surface and abundant pores. The determined Brunauer–Emmett–Teller (BET) surface area was 55 m2/g with a pore radius of 1.99 nm and the pore volume was 0.032 cm3/g. FTIR analysis revealed that the abundance of various functional groups on the surface of glauconite may play an important role for the adsorption process. The optimum pH was 11 with complete removal of phosphate in a short time (nearly 1 min). The experimental data fitted very well with the Langmuir isotherm (R2 = 0.999) with a maximum adsorption capacity of 32.26 mg/g at 50 °C. Adsorption kinetic data were best fitted with the pseudo-second-order kinetic model (R2 = 0.999). Thermodynamic study confirmed the spontaneous, endothermic and irreversible adsorption process. Therefore, glauconite is a promising natural low-cost adsorbent for phosphate removal from wastewater.

scholarly journals Porous Activated Carbon from Lignocellulosic Agricultural Waste for the Removal of Acetampirid Pesticide from Aqueous Solutions

Molecules ◽  
2020 ◽  
Vol 25 (10) ◽  
pp. 2339 ◽  
Author(s):  
Somaia G. Mohammad ◽  
Sahar M. Ahmed ◽  
Abd El-Galil E. Amr ◽  
Ayman H. Kamel
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Adsorption Process ◽  
Low Cost ◽  
Agricultural Waste ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Equilibration Time ◽  
Freundlich Isotherms ◽  
Before And After

A facile eco-friendly approach for acetampirid pesticide removal is presented. The method is based on the use of micro- and mesoporous activated carbon (TPAC) as a natural adsorbent. TPAC was synthesized via chemical treatment of tangerine peels with phosphoric acid. The prepared activated carbon was characterized before and after the adsorption process using Fourier- transform infrared (FTIR), X-ray diffraction (XRD), particle size and surface area. The effects of various parameters on the adsorption of acetampirid including adsorbent dose (0.02–0.2 g), pH 2–8, initial adsorbate concentration (10–100 mg/L), contact time (10–300 min) and temperature (25–50 °C) were studied. Batch adsorption features were evaluated using Langmuir and Freundlich isotherms. The adsorption process followed the Langmuir isotherm model with a maximum adsorption capacity of 35.7 mg/g and an equilibration time within 240 min. The adsorption kinetics of acetamiprid was fitted to the pseudo-second-order kinetics model. From the thermodynamics perspective, the adsorption was found to be exothermic and spontaneous in nature. TPAC was successfully regenerated and reused for three consecutive cycles. The results of the presented study show that TPAC may be used as an effective eco-friendly, low cost and highly efficient adsorbent for the removal of acetamiprid pesticides from aqueous solutions.

scholarly journals Facile Preparation and Highly Efficient Sorption of Magnetic Composite Graphene Oxide/Fe3O4/GC for Uranium Removal

2021 ◽  
Author(s):  
Aili Yang ◽  
Zhijun Wang ◽  
Yukuan Zhu
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
High Efficiency ◽  
Removal Rate ◽  
Low Cost ◽  
Hydrothermal Carbonization ◽  
Maximum Adsorption Capacity ◽  
Magnetic Composite ◽  
Order Kinetic

Abstract In this work, we reported for the first time a novel magnetic composite graphene oxide/Fe3O4/glucose-COOH (GO/Fe3O4/GC) that was facilely prepared from glucose through the hydrothermal carbonization and further combination with graphene oxide (GO). The chemical and structural properties of the samples were investigated. By the batch uranium adsorption experiments, the magnetic composite GO/Fe3O4/GC exhibits an excellent adsorption performance and fast solid-liquid separation for uranium from aqueous solution. GO/Fe3O4/GC (the maximum adsorption capacity (Qm) was 390.70 mg g-1) exhibited excellent adsorption capacity and higher removal rate (> 99%) for U(VI) than those of glucose-COOH (GC) and magnetic GC (MGC). The effect of the coexisting ions, such as Na+, K+, Mg2+, Ca2+, and Al3+, on the U(VI) removal efficiency of GO/Fe3O4/GC was examined. The equilibrium sorption and sorption rate for the as-prepared adsorbents well fit the Langmuir model and pseudo second-order kinetic model, respectively. The thermodynamic parameters (ΔH0 = 11.57 kJ mol-1 and ΔG0 < 0) for GO/Fe3O4/GC indicate that the sorption process of U(VI) was exothermic and spontaneous. Thus, this research provides a facile strategy for the preparation of the magnetic composite with low cost, high efficiency and fast separation for the U(VI) removal from aqueous solution.

scholarly journals Environmentally Friendly Gelatin/β-Cyclodextrin Composite Fiber Adsorbents for the Efficient Removal of Dyes from Wastewater

Molecules ◽  
2018 ◽  
Vol 23 (10) ◽  
pp. 2473 ◽  
Author(s):  
Yu Chen ◽  
Yanli Ma ◽  
Weipeng Lu ◽  
Yanchuan Guo ◽  
Yi Zhu ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
High Efficiency ◽  
Removal Rate ◽  
Gentian Violet ◽  
Low Cost ◽  
Environmentally Friendly ◽  
Composite Fiber ◽  
Raw Material ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic

In this paper, environmentally friendly gelatin/β-cyclodextrin (β-CD) composite fiber adsorbents prepared by electrospinning were used for the removal of dyes from wastewater. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and a universal materials tester were employed to characterize the internal structures, surface morphologies and mechanical strength of the composite fiber adsorbents. Additionally, the fiber was evaluated as an adsorbent for the removal of methylene blue (MB) from aqueous solution. The effects of the raw material ratio, pH, temperature, concentration and adsorption time were studied. The results show that the gelatin/β-CD composite fiber adsorbents possess excellent mechanical strength and high adsorption efficiency for MB. The adsorption equilibrium and adsorption kinetics are well-described by the Langmuir isotherm model and the pseudo-second-order kinetic model, respectively. The theoretical maximum adsorption capacity is 47.4 mg·g−1. Additionally, after nine successive desorption-adsorption cycles, the removal rate is still over 70%. Moreover, the gelatin/β-CD composite fiber adsorbents exhibit excellent adsorption capability for basic fuchsin, gentian violet, brilliant blue R and malachite green dyes. Therefore, owing to the characteristics of degradability, low cost and high-efficiency, the gelatin/β-CD composite fiber can be used as an efficient adsorbent for the removal of dyes from wastewater.

Surface interaction of sweet potato peels (Ipomoea batata) with Cd(II) and Pb(II) ions in aqueous medium

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Aqueous Medium ◽  
Sweet Potato ◽  
Adsorption Process ◽  
Low Cost ◽  
Correlation Coefficients ◽  
Order Kinetic ◽  
Thermodynamic Evaluation ◽  
Dissociative Mechanism ◽  
Pseudo Second Order ◽  
Potato Peels

The removal of Cd(II) and Pb(II) ions from aqueous medium was studied using potato peels biomass. The adsorption process was evaluated using Atomic Absorption Spectrophotometer (AAS). The Vibrational band of the potato peels was studied using Fourier Transform Infrared Spectroscopy (FTIR). The adsorption process was carried out with respect to concentration, time, pH, particle size and the thermodynamic evaluation of the process was carried at temperatures of 30, 40, 50 and 60(0C), respectively. The FTIR studies revealed that the potato peels was composed of –OH, -NH, –C=N, –C=C and –C-O-C functional groups. The optimum removal was obtained at pH 8 and contact time of 20 min. The adsorption process followed Freundlich adsorption and pseudo second-order kinetic models with correlation coefficients (R2) greater than 0.900. The equilibrium adsorption capacity showed that Pb(II) ion was more adsorbed on the surface of the potato peels biomass versus Cd (II) ion (200.91 mg/g &gt; 125.00 mg/g). The thermodynamic studies indicated endothermic, dissociative mechanism and spontaneous adsorption process. This study shows that sweet potato peels is useful as a low-cost adsorbent for the removal of Cd(II) and Pb(II) ions from aqueous medium.

Comparison of the fixation of several metal ions onto a low-cost biopolymer

2002 ◽  
Vol 2 (5-6) ◽  
pp. 217-224 ◽  
Author(s):  
Z. Reddad ◽  
C. Gérente ◽  
Y. Andrès ◽  
P. Le Cloirec
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Low Cost ◽  
Operating Conditions ◽  
Order Kinetic ◽  
Adsorption Mechanisms ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Beet Pulp ◽  
Removal Of Metal Ions

In the present work, sugar beet pulp, a common waste from the sugar refining industry, was studied in the removal of metal ions from aqueous solutions. The ability of this cheap biopolymer to sorb several metals namely Pb2+, Cu2+, Zn2+, Cd2+ and Ni2+ in aqueous solutions was investigated. The metal fixation capacities of the sorbent were determined according to operating conditions and the fixation mechanisms were identified. The biopolymer has shown high elimination rates and interesting metal fixation capacities. A pseudo-second-order kinetic model was tested to investigate the adsorption mechanisms. The kinetic parameters of the model were calculated and discussed. For 8 × 10-4 M initial metal concentration, the initial sorption rates (v0) ranged from 0.063 mmol.g-1.min-1 for Pb2+ to 0.275 mmol.g-1.min-1 for Ni2+ ions, with the order: Ni2+ &gt; Cd2+ &gt; Zn2+ &gt; Cu2+ &gt; Pb2+. The equilibrium data fitted well with the Langmuir model and showed the following affinity order of the material: Pb2+ &gt; Cu2+ &gt; Zn2+ &gt; Cd2+ &gt; Ni2+. Then, the kinetic and equilibrium parameters calculated qm and v0 were tentatively correlated to the properties of the metals. Finally, equilibrium experiments in multimetallic systems were performed to study the competition of the fixation of Pb2+, Zn2+ and Ni2+ cations. In all cases, the metal fixation onto the biopolymer was found to be favourable in multicomponent systems. Based on these results, it is demonstrated that this biosorbent represents a low-cost solution for the treatment of metal-polluted wastewaters.

Sign in / Sign up

Export Citation Format

Share Document