Detection and Evaluation of process related impurities in Obeticholic Acid Drug material using HPLC Method

Obeticholic acid (OBE) is being used to treat primary biliary cirrhosis and cholangitis. An HPLC with refractive index detection method for eight process related substances of OBE was developed and verified for use in quality assurance laboratories for regular analysis. The separation and analysis were performed on YMC Triart C18 (3.0 µm particle size, 250 mm × 4.6 mm) column. Mobile phase employed consisted of 0.01N potassium phosphate buffer (3.0 ± 0.05 pH, set with 0.1% orthophosphoric acid) and acetonitrile at 45:55 (v/v) ratio. The method established for determination of eight impurities in OBE was validated and verified in keeping with International Council for Harmonisation guidelines. This method can be used for routine analysis of eight impurities in OBE bulk samples.

Application of the Principles of Green Chemistry for the Development of a New and Sensitive Method for Analysis of Ertapenem Sodium by Capillary Electrophoresis

An innovative method is validated for the analysis of ertapenem sodium by capillary electrophoresis using potassium phosphate buffer 10 mM pH 7 and 15 kV voltage, in the concentration range of 70 to 120 μg mL−1. Ertapenem had a migration time of 3.15 minutes and the linearity curve was y = 2281.7 x - 24495 with a R2 = 0.9994. Thus, we propose a routine analysis method that meets the principles of green analytical chemistry for the routine analysis of ertapenem sodium by capillary electrophoresis.

DEVELOPMENT OF A HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY METHOD FOR ANALYZING DISODIUM 5′-GUANYLATE AND DISODIUM 5′-INOSINATE LEVELS IN FLAVOR ENHANCERS

Objective: This study aimed to develop a selective analytical method for assessing disodium 5′-guanylate and disodium 5′-inosinate levels in flavorenhancers.Methods: The levels were assessed using high-performance liquid chromatography (HPLC) with a photodiode array detector (PDA) (wavelength=255 nm) and a SunFire® C18 column (250 mm × 4.6 mm × 5 μm). The mobile phase comprised a mixture of potassium phosphate buffer and anion pair reagent-hexane-1-sulfonic acid sodium salt - with a flow rate of 1.2 mL/min. The ion pair was used to generate a neutral equilibrium, whichresulted in increased retention of the analytes. Optimized analysis conditions were then validated regarding accuracy, precision, linearity, selectivity,and the limits of detection and quantification.Results: The average levels of disodium 5′-inosinate in the six analyzed samples were 0.24±1.46, 0.21±2.69, 0.58±3.26, 0.21±0.84, 0.22±3.59, and0.47±2.21%, respectively. Regarding disodium 5′-guanylate, the average levels were 0.15±2.85, 0.15±0.12, 0.41±3.80, 0.16±1.72, 0.27±1.18, and0.34±1.83, respectively.Conclusion: The optimal conditions for analyzing disodium 5′-guanylate and disodium 5′-inosinateusing HPLC with a PDA and SunFire C18 columnwere λ=255 nm, a mobile phase of potassium phosphate buffer and sodium hexane sulfonate, and a flow rate of 1.2 mL/min. For disodium 5′-inosinate,its average levels in samples A–F were 0.24±1.46, 0.21±2.69, 0.58±3.26, 0.21±0.84, 0.22±3.59, and 0.47±2.21%, respectively. Meanwhile, the averagelevels of disodium 5′-guanylate in the samples were 0.15±2.85, 0.15±0.12, 0.41±3.80, 0.16±1.72, 0.27±1.18, and 0.34±1.83%, respectively.

Protecting ultra- and hyperhydrophilic implant surfaces in dry state from loss of wettability

Ultrahydrophilic titanium miniplates with sandblasted and acid etched (SLA) surfaces were protected from loss of hydrophilicity by an exsiccation layer of salt and stored in a dry state. Various salts in different concentrations were tested in respect to their conservation capacity and optical appearance. Potassium phosphate buffer in a specified composition appeared to be optimal. This optimal system was applied in a long time storage experiment showing no loss of hydrophilicity over years. It was also transferred with success to hyperhydrophilic dental implants.

Ultraviolet spectrophotometric method for analytical determination of mianserin hydrochloride in coated tablets and comparison with LC

abstract Ultraviolet spectrophotometric (UV) and Liquid Chromatographic (LC) methods for the determination of mianserin hydrochloride in pharmaceutical formulation were developed and validated. The various parameters, such as specificity, linearity, precision and accuracy were studied according to International Conference on Harmonization (ICH, 2005). For UV method, mianserin hydrochloride was determinate at 278 nm using HCl 0.1 M as the solvent. The response was linear in the concentration range of 20.0 - 140.0 µg/mL (r = 0.9998). Precision data evaluated by relative standard deviation was lower than 2%. The UV method was simple, rapid and low cost. Chromatographic analyses were performed in an Ace C18 column and the mobile phase was composed of methanol, 50 mM monobasic potassium phosphate buffer and 0.3% triethylamine solution adjusted to pH 7.0 with phosphoric acid 10% (85:15). LC method was specific, linear, precise, exact and robust. The results confirmed that the both methods are valid and useful to the routine quality control of mianserin hydrochloride in coated tablets. Statistical analysis by Student´s t-test showed no significant difference between the results obtained by UV and LC methods.