Synthesis of Anti-Inflammatory Spirostene-Pyrazole Conjugates by a Consecutive Multicomponent Reaction of Diosgenin with Oxalyl Chloride, Arylalkynes and Hydrazines or Hydrazones

Steroid sapogenin diosgenin is of significant interest due to its biological activity and synthetic application. A consecutive one-pot reaction of diosgenin, oxalyl chloride, arylacetylenes, and phenylhydrazine give rise to steroidal 1,3,5-trisubstituted pyrazoles (isolated yield 46–60%) when the Stephens–Castro reaction and heterocyclization steps were carried out by heating in benzene. When the cyclization step of alkyndione with phenylhydrazine was performed in 2-methoxyethanol at room temperature, steroidal α,β-alkynyl (E)- and (Z)-hydrazones were isolated along with 1,3,5-trisubstituted pyrazole and the isomeric 2,3,5-trisubstituted pyrazole. The consecutive reaction of diosgenin, oxalyl chloride, phenylacetylene and benzoic acid hydrazides efficiently forms steroidal 1-benzoyl-5-hydroxy-3-phenylpyrazolines. The structure of new compounds was unambiguously corroborated by comprehensive NMR spectroscopy, mass-spectrometry, and X-ray structure analyses. Performing the heterocyclization step of ynedione with hydrazine monohydrate in 2-methoxyethanol allowed the synthesis of 5-phenyl substituted steroidal pyrazole, which was found to exhibit high anti-inflammatory activity, comparable to that of diclofenac sodium, a commercial pain reliever. It was shown by molecular docking that the new derivatives are incorporated into the binding site of the protein Keap1 Kelch-domain by their alkynylhydrazone or pyrazole substituent with the formation of more non-covalent bonds and have higher affinity than the initial spirostene core.

Understanding of the Key Factors Determining the Activity and Selectivity of CuZn Catalysts in Hydrogenolysis of Alkyl Esters to Alcohols

CuZn catalysts are perspective catalysts for esters hydrogenolysis, but more knowledge is needed to optimize their catalytic performance. In this work, we consider the impact of CuZn catalysts composition on their structure, activity, selectivity, and stability in esters hydrogenolysis. Four catalysts with various Cu/Zn ratio were synthesized by a co-precipitation and characterized in as-prepared, calcined, reduced, and spent state by XRF, XRD, N2 physisorption, CO2-TPD, NH3-TPD, and N2O chemisorption. XRD data revealed the effect of the composition on the size of Cu and ZnO particles. The catalytic performance was investigated using an autoclave. All catalysts exhibited high methyl hexanoate conversion about 48–60% after 3 h but their activity and selectivity were found to be dependent on Cu/Zn ratio. The conversion of methyl hexanoate and hexyl hexanoate was compared to explain the observed product selectivity. Moreover, the catalysts stability was investigated in three consecutive reaction cycles and correlated with changes in the size of constituent particles. Moreover, when different esters were tested, a slight decrease in conversion and increase in alcohol selectivity with a growth in molecule size was observed. Obtained results allow making a conclusion about the optimal composition that provides the good performance of CuZn catalysts in ester hydrogenolysis.

A 5-(2-Pyridyl)tetrazolate Complex of Molybdenum(VI), Its Structure, and Transformation to a Molybdenum Oxide-Based Hybrid Heterogeneous Catalyst for the Epoxidation of Olefins

There is a considerable practical interest in discovering new ways to obtain organomolybdenum heterogeneous catalysts for olefin epoxidation that are easier to recover and reuse and display enhanced productivity. In this study, the complex salt (H2pytz)[MoO2Cl2(pytz)] (1) (Hpytz = 5-(2-pyridyl)tetrazole) has been prepared, structurally characterized, and employed as a precursor for the hydrolysis-based synthesis of a microcrystalline molybdenum oxide/organic hybrid material formulated as [MoO3(Hpytz)] (2). In addition to single-crystal X-ray diffraction (for 1), compounds 1 and 2 were characterized by FT-IR and Raman spectroscopies, solid-state 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR, and scanning electron microscopy (SEM). Compounds 1 and 2 were evaluated as olefin epoxidation catalysts using the model reaction of cis-cyclooctene (Cy8) with tert-butyl hydroperoxide (TBHP), at 70 °C, which gave 100% epoxide selectivity up to 100% conversion. While 1 behaved as a homogeneous catalyst, hybrid 2 behaved as a heterogeneous catalyst and could be recovered for recycling without showing structural degradation or loss of catalytic performance over consecutive reaction cycles. The substrate scope was broadened to monoterpene DL-limonene (Lim) and biobased unsaturated fatty acid methyl esters, methyl oleate (MeOle), and methyl linoleate (MeLin), which gave predominantly epoxide products.

Superior operational stability of immobilized l-asparaginase over surface-modified carbon nanotubes

Abstractl-asparaginase (ASNase, EC 3.5.1.1) is an enzyme that catalyzes the l-asparagine hydrolysis into l-aspartic acid and ammonia, being mainly applied in pharmaceutical and food industries. However, some disadvantages are associated with its free form, such as the ASNase short half-life, which may be overcome by enzyme immobilization. In this work, the immobilization of ASNase by adsorption over pristine and modified multi-walled carbon nanotubes (MWCNTs) was investigated, the latter corresponding to functionalized MWCNTs through a hydrothermal oxidation treatment. Different operating conditions, including pH, contact time and ASNase/MWCNT mass ratio, as well as the operational stability of the immobilized ASNase, were evaluated. For comparison purposes, data regarding the ASNase immobilization with pristine MWCNT was detailed. The characterization of the ASNase-MWCNT bioconjugate was addressed using different techniques, namely Transmission Electron Microscopy (TEM), Thermogravimetric Analysis (TGA) and Raman spectroscopy. Functionalized MWCNTs showed promising results, with an immobilization yield and a relative recovered activity of commercial ASNase above 95% under the optimized adsorption conditions (pH 8, 60 min of contact and 1.5 × 10–3 g mL−1 of ASNase). The ASNase-MWCNT bioconjugate also showed improved enzyme operational stability (6 consecutive reaction cycles without activity loss), paving the way for its use in industrial processes.

H2 Production from Formic Acid Using Highly Stable Carbon-Supported Pd-Based Catalysts Derived from Soft-Biomass Residues: Effect of Heat Treatment and Functionalization of the Carbon Support

The production of hydrogen from liquid organic hydrogen carrier molecules stands up as a promising option over the conventional hydrogen storage methods. In this study, we explore the potential of formic acid as a convenient hydrogen carrier. For that, soft-biomass-derived carbon-supported Pd catalysts were synthesized by a H3PO4-assisted hydrothermal carbonization method. To assess the impact of the properties of the support in the catalytic performance towards the dehydrogenation of formic acid, three different strategies were employed: (i) incorporation of nitrogen functional groups; (ii) modification of the surface chemistry by performing a thermal treatment at high temperatures (i.e., 900 °C); and (iii) combination on both thermal treatment and nitrogen functionalization. It was observed that the modification of the carbon support with these strategies resulted in catalysts with enhanced performance and outstanding stability even after six consecutive reaction cycles, thus highlighting the important effect of tailoring the properties of the support.

Glycerol Esterification for Triacetin Production using Fe3O4@SiO2@PO43- as Heterogeneous Magnetic Catalyst

To facilitate the magnetic separation, phosphate group is embedded onto silica-coated Fe3O4 magnetic nanoparticles to prepare Fe3O4@SiO2@PO43− solid catalyst for the glycerol esterification with acetic acid. The catalyst was characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), vibrating magnetic spectroscopy (VSM) and Fourier Transform Infrared (FTIR) spectroscopy. The Fe3O4@SiO2@PO43− magnetic catalyst during the glycerol esterification with acetic acid was found to demonstrate excellent glycerol conversion levels (97 %) while retaining 92 % triacetin selectivity. The plausible mechanism of glycerol esterification suggests the initiation of the reaction by the protonation of the acetic acid. The catalyst was recovered from the reaction mixture under the influence of external magnetic field and reused during 4 consecutive reaction cycles.

Kinetic Study of Subcritical Water Extraction of Carbohydrate from Microalgae Nannochloropsis sp.

Microalgae contain a significant amount of carbohydrates that can be converted further to produce valuable compounds. To extract carbohydrates from microalgae, sub-critical water extraction (SWE) is a viable and novel method. Compared to other existing chemical and biological extraction methods, SWE is more economical, effective, and efficient in terms of process conditions. This process uses high temperature and pressure of water at just below supercritical conditions to keep water at a liquid state. This study aims to investigate the factors that affect the extraction yield of carbohydrates from microalgae Nannochloropsis sp. using the SWE process. The extraction was carried out at a temperature of 160 – 320 oC, a duration of 5 – 25 min, and microalgal biomass loading of 5 - 25% w/v. The kinetics study was conducted in an extraction time of 5 – 25 min at 200 oC and 5% (w/v) biomass loading. A simplified kinetic model based on a consecutive reaction was used to describe carbohydrate production and decomposition via SWE. It was found that the maximum yield of total carbohydrate was 18.04 g/100 g which was obtained at 200 oC, 10 min, and 5% (w/v) microalgal biomass loading. The carbohydrate concentration was decreased as the temperature, extraction time and microalgal biomass loading increased. This result indicated that the SWE is a promising extraction method for carbohydrate recovery from microalgae, and the factors investigated here had a significant effect on the extraction process. The proposed kinetic model was also able to capture the experimental data well within the range of operating conditions studied in this work.

Catalytic Oxidation of Benzyl Alcohol to Benzaldehyde on Au8 and Au6Pd2 Clusters: A DFT Study on the Reaction Mechanism

Density functional theory calculations were performed to investigate the reaction mechanism of the aerobic oxidation of benzyl alcohol to benzaldehyde catalyzed by Au and Au–Pd clusters. Two consecutive reaction mechanisms were examined with Au8 and Au6Pd2 clusters: (1) the oxidation of benzyl alcohol with dissociated O atoms on metal clusters generating benzaldehyde and H2O; and (2) oxidation with adsorbed oxygen molecules generating benzaldehyde and H2O2. The calculations show that the aerobic oxidation of benzyl alcohol energetically prefers to proceed in the former mechanism, which agrees with the experimental observation. We demonstrate that the role of Au centers around the activation of molecular oxygen to peroxide-like species, which are capable of the H–abstraction of benzyl alcohol. The roles of Pd in the Au6Pd2 cluster are: (1) increasing the electron distribution to neighboring Au atoms, which facilitates the activation of O2; and (2) stabilizing the adsorption complex and transition states by the interaction between positively charged Pd atoms and the π-bond of benzyl alcohol, both of which are the origin of the lower energy barriers than those of Au8.