Third Molar Surgery: Risk Factors and Complications after Removal of Third Molars

Objective: There is a need for this research because it aims to identify characteristics that increase the likelihood of negative outcomes following the removal of third molars. Study Design: Observational/transversal study Place and Duration: Dental College HITEC-IMS Taxilla/ Gulraiz Dental Clinic Quaid Avenue Main Road, Gulraiz 3, Rawalpindi. Nov 2020-June 2021 Methods: A total of 180 male and female participants were included in this study. The patients ranged in age from 20 to 50. Pericoronitis and tooth impaction were among the complaints of the patients included in the study. The oral and maxillofacial department operated on all of the patients who requested the removal of their third molars. All patients provided written consent before having their personal data collected, including their age, gender, BMI, kind of impaction, and location of their third molar. Various operative variables were employed. In our research, we looked at post-operative complications and risk variables. The whole data was analyzed with SPSS 23.0. Results: 110 (61.1%) patients were males and 70 (38.9%) cases were females. 28.17±9.47 years were the mean age with mean BMI 24.11±3.65 kg/m2. Most of the teeth impacted in left side found in 102 (56.7%) patients. Most common type of impaction was mesioangular among 90 (50%) cases followed by distoangular 45 (23.7%) cases. Majority of the third molars were fully impacted 120 (66.7%), 38 (21.1%) were partially impacted and frequency of erupted tooth was 22 (12.2%). All the third molars were removed by buccal guttering technique under local anesthesia. Post-operative infection was the most common complication found in 80 (44.4%) cases followed by gingival defect in 27 (15%) radicular fractures in 24 (13.3%) cases. Location of the third molar and bone removal was the most common factor found. Conclusion: There was an increased risk of problems with tooth sectioning, bone removal, and/or tooth localization in patients above the age of 22. Both the evaluation of the indications for the removal of third molars and the process of informed consent should reflect this information. Keywords: Third Molars, Surgery, Anesthesia, Complications, Impactions

Usefulness of Selected Acute-Phase Proteins in the Postsurgical Monitoring of Arthroscopy and Splint Bone Removal in Horses

Background: Arthroscopy and splint bone removal are the common orthopedic procedures in horses. Estimation of the dynamics of acute phase proteins in postoperative monitoring seems to be interesting diagnostic approach. The aim of the study was to investigate changes in the concentrations of plasma inflammatory markers—fibrinogen, haptoglobin, and protease inhibitors—following orthopedic surgery in horses. The study involved 114 horses, divided into two study groups undergoing: arthroscopy (41 horses) and splint bone removal (13 horses). The control group consisted of 60 healthy horses. The blood was collected before the surgery and 24, 48, 72 h, 5, 7, 10, 14 and 28 days after the surgery. Plasma fibrinogen, serum haptoglobin and proteinase inhibitors were measured. Results: In non-complicated cases of arthroscopy and splint bone removal, fibrinogen and haptoglobin increased stepwise from 24 h, achieved the maximum level at 72 h and returned to preoperative levels after 10–14 days. In one complicated case after arthroscopy surgery the marked increase in fibrinogen and haptoglobin concentrations was observed 24 h earlier than standard parameters of inflammation Conclusion: The study shows the evolution of APPs after arthroscopy and splint bone removal in 28 days postsurgery period and in the case of one complicated case of arthroscopy.

Estimation of time utilized in suturing of oral flaps post-surgical wisdom teeth removal using Negus knot pusher instrument (a comparative study)

Wisdom teeth were the most common teeth affected among the rest of the teeth, these teeth need accurate evaluation and diagnosis, surgical removal of impacted wisdom needs time for incision, bone removal and suture, so the use of any instrument helps to reduce this time is essential. Objective The objectives of this study were to estimate the time needed for the suture of oral flaps post-surgical removal of the lower wisdom teeth by using Negus knot pusher and compare it with the time used for stitching in conventional manual holding single stitching. Material and Methods: Data had been collected from thirty patients through history, clinical examination and radiographic assessment, followed by classical surgical removal performed on the same principles for all patients, at the suture level patients divided arbitrarily into two groups, control group 15 patients and 15 patients Negus pusher group, using Negus knot pusher, which is usually used to hold the stitch and stop bleeding post tonsillectomy operations by ligation, time elapsed for suturing with knot tying is calculated for both groups. Results: Among the 30 patients incorporated in the clinical study, control group mean was (1 minutes and 11 seconds and 70 milliseconds) while for the pusher group was (1 minutes and 32 seconds and 57 milliseconds), the comparison by means of T-test was not significant with the (0.424) value. Conclusion: the Negus pusher instrument can be used for the knotting stiches post wisdom teeth removal as an auxiliary tool and the time can be shortened by the use of a modified handling technique and more satisfaction for patients. Keywords Time; Suturing; Wisdom teeth; Negus knot pusher.

Augmented Reality for Retrosigmoid Craniotomy Planning

While medical imaging data have traditionally been viewed on two-dimensional (2D) displays, augmented reality (AR) allows physicians to project the medical imaging data on patient's bodies to locate important anatomy. We present a surgical AR application to plan the retrosigmoid craniotomy, a standard approach to access the posterior fossa and the internal auditory canal. As a simple and accurate alternative to surface landmarks and conventional surgical navigation systems, our AR application augments the surgeon's vision to guide the optimal location of cortical bone removal. In this work, two surgeons performed a retrosigmoid approach 14 times on eight cadaver heads. In each case, the surgeon manually aligned a computed tomography (CT)-derived virtual rendering of the sigmoid sinus on the real cadaveric heads using a see-through AR display, allowing the surgeon to plan and perform the craniotomy accordingly. Postprocedure CT scans were acquired to assess the accuracy of the retrosigmoid craniotomies with respect to their intended location relative to the dural sinuses. The two surgeons had a mean margin of davg = 0.6 ± 4.7 mm and davg = 3.7 ± 2.3 mm between the osteotomy border and the dural sinuses over all their cases, respectively, and only positive margins for 12 of the 14 cases. The intended surgical approach to the internal auditory canal was successfully achieved in all cases using the proposed method, and the relatively small and consistent margins suggest that our system has the potential to be a valuable tool to facilitate planning a variety of similar skull-base procedures.

Effects of compressive lesions on intraoperative human spinal cord elasticity

OBJECTIVE Although evaluating tissue elasticity has various clinical applications, spinal cord elasticity (SCE) in humans has never been well documented. In this study, the authors aimed to evaluate the impact of compression on human SCE in vivo. METHODS The authors prospectively assessed SCE using intraoperative shear wave elastography (SWE). All consecutive patients undergoing spinal cord (SC) decompression (laminectomy or corpectomy) between June 2018 and June 2019 were included. After intraoperative exposure of the patient’s dura mater, at least three SWE measurements of the SC and its coverings were performed. Intraoperative neurological monitoring in the form of motor and somatosensory evoked potentials was utilized. Cases were divided into two groups based on the state of SC compression following bone removal (laminectomy or corpectomy): patients with adequate decompression (the decompressed SC group [DCG]) following bone removal and patients with remining compression, e.g., compressing tumor or instability (the compressed SC group [COG]). RESULTS A total of 25 patients were included (8 females and 17 males) with a mean age of 48.28 ± 21.47 years. Most cases were degenerative diseases (10 cases) followed by tumors (6 cases), and the compression was observed at cervical (n = 14), thoracic (n = 9), and conus medullaris (n = 2) levels. The COG (6 cases) expressed significantly higher elasticity values, i.e., greater stiffness (median 93.84, IQR 75.27–121.75 kPa) than the decompressed SC in DCG (median 9.35, IQR 6.95–11.22 kPa, p < 0.001). Similarly, the compressed dura mater in the COG was significantly stiffer (mean ± SD 121.83 ± 70.63 kPa) than that in the DCG (29.78 ± 18.31 kPa, p = 0.042). Following SC decompression in COG, SCE values were significantly reduced (p = 0.006; adjusted for multiple comparisons). Intraoperative monitoring demonstrated no worsening from the baseline. CONCLUSIONS The current study is to the authors’ knowledge the first to quantitatively demonstrate increased stiffness (i.e., elasticity value) of the human SC and dura mater in response to external compression in vivo. It appears that SCE is a dynamic phenomenon and is reduced following decompression. Moreover, the evaluation of human SCE using the SWE technique is feasible and safe. Information from future studies aiming to further define SCE could be valuable in the early and accurate diagnosis of the compressed SC.

Odontossecção intermediária em retenção atípica de caninos inferiores

Two lower canines horizontally situated in the anterior mental region were removed. In order to minimize bone loss during teeth extraction it was used an intermediate tooth section technique. Sectioning allows central, crown and apical portions of the tooth to be removed through a not too large opening provided by bone removal.

Ultrasonic bone removal from the ossicular chain affects cochlear structure and function

Introduction Ultrasonic bone removal devices (UBD) are capable of cutting through bony tissue without injury to adjacent soft tissue. The feasibility and safety of using this technology for removal of bone from an intact ossicular chain (as might be required for otosclerosis or congenital fixation) was investigated in an animal model. Methods This was a prospective animal study conducted on seven anesthetised adult chinchillas. An UBD was used to remove bone from the malleus head in situ. Pre and post-operative distortion product otoacoustic emission (DPOAE) levels and auditory brainstem response (ABR) thresholds were recorded. Scanning electron microscopy (SEM) was used to assess cochlear haircell integrity. Results Precise removal of a small quantity of bone from the malleus head was achieved by a 30s application of UBD without disruption of the ossicular chain or tympanic membrane. DPOAEs became undetectable after the intervention with signal-to-noise ratios (SNR) < 5 dB SPL in all ears. Furthermore, ABR thresholds were elevated > 85 dB SPL in 13 ears. SEM showed significant disruption of structural integrity of the organ of Corti, specifically loss and damage of outer haircells. Conclusions Although UBD can be used to reshape an ossicle without middle ear injury, prolonged contact with the ossicular chain can cause structural and functional injury to the cochlea. Extensive cochlea pathology was found, but we did not investigate for recovery from any temporary threshold shift. In the authors’ opinion, further study should be undertaken before consideration is given to use of the device for release of ossicular fixation. Graphical abstract

A Unique Way of Removing Mandibular Third Molars - Implosion Technique

The average time consumed for disimpaction of mandibular third molar using rotatory instruments was approximately 17 mins and 23 mins while using a piezotome. The authors introduce a new technique of disimpaction of mandibular third molar with the least amount of bone removal ever achieved during mandibular third molar removal. This technique can be readily included in routine clinical practice and can be performed by using routine rotary instruments. This technique was successfully accomplished in 10 individuals with the least amount of discomfort and post-operative complications reported from day 1 to day 14. The procedure was evaluated based on time of the procedure, pain score, bleeding, nerve injury, trismus, swelling & dry socket. Third molar removal has been the most frequently performed oral surgical procedure in the modern world of dentistry.1 Although, mandibular third molar is the most commonly performed procedure, it demands skill, technique and experience. Several techniques have been implied for disimpaction of mandibular third molar, but every method involves either considerable amount of bone removal or splitting the bone. Bone manipulation is done by using a rotary instruments or chisel and mallet. The most popular techniques are buccal bone guttering, distal bone removal, lingual bone split technique and lingual bone guttering.2 According to the traditional classifications of impacted mandibular third molar (Pell & Gregory and Winter’s classification), the minimum amount of bucco-distal bone removed during disimpaction of mesioangularly positioned class I A impacted mandibular third molar using rotary instruments and conventional techniques can be calculated as 157.5 mm2 (volume of a rectangle = L X W X H; where L = 15 mm, W = 1.5 mm [width of the bur] and H = 7 mm). The mandibular third molar requiring osteotomy and tooth section have the highest risk of complications3. Surgical time had significantly increased in cases which required osteotomy and tooth section. Post-operative swelling and pain has been recorded as significant complications after using rotary instruments via buccal approach followed by use of chisel & mallet and least in lingual split approach. On the contrary, post-operative nerve injury and trismus were significantly high in lingual split technique. Dry socket was more in patients of bur technique.2

Perianal abscess due to a long fish bone: a case report

Few articles have reported cases of perianal abscess due to ingested foreign bodies. Herein, we report a case of perianal abscess due to a long fish bone. A 72-year-old man who was toothless and wore a denture had a chief complaint of anal pain. His left-side buttock had swelling and redness. Computed tomography revealed a perianal abscess on his left-side buttock and high-intensity linear structure in the abscess cavity. We made a diagnosis of perianal abscess due to a fish bone and performed an emergency operation. We opened the abscess cavity and removed the 5 cm fish bone from the cavity. After drainage of the abscess cavity and antibiotic administration, he was discharged from our hospital on day 8. A long fish bone could cause perianal abscesses. Rapid diagnosis and ensuring fish bone removal are important to prevent sepsis.