SOI Waveguide Bragg Grating Photonic Sensor for Human Body Temperature Measurement Based on Photonic Integrated Interrogator

A waveguide Bragg grating (WBG) provides a flexible way for measurement, and it could even be used to measure body temperature like e-skin. We designed and compared three structures of WBG with the grating period, etching depth, and duty cycle. The two-sided WBG was fabricated. An experimental platform based on photonic integrated interrogator was set up and the experiment on the two-sided WBG was performed. Results show that the two-sided WBG can be used to measure temperature changes over the range of 35–42 °C, with a temperature measurement error of 0.1 °C. This approach has the potential to facilitate application of such a silicon-on-insulator (SOI) WBG photonic sensor to wearable technology and realize the measurement of human temperature.

High tunability and sensitivity of 1D topological photonic crystal heterostructure

A modality to high tunability and sensing performance of one-dimensional (1D) topological photonic crystal (PC) heterostructure is realized based on a new mechanism through 1D topological PC. With inserting a defect aqueous layer as a sandwich between two 1D PCs, the transmittance gradually decreases with the increasing thickness of the defect layer. When the two layers of the topological heterostructure interface are replaced by the defect layer, the tunability, all sensing capabilities have been improved and the principle of topology is preserved. A topologically protected edge state is formed at the heterostructure interface with a highly localized electric field. For glucose sensing, high sensitivity S = 603.753 nm/RIU is obtained at the low detection limit of about DL = 1.22×10^(-4) RIU with high-quality factor Q = 2.33×10^4 and a high figure of merit FOM = 8147.814 RIU^(-1). Besides, the transmittance can be maintained more than 99% at low and/or high glucose concentrations, due to the coupling topological edge mode between defect mode and topological edge state. An excellent platform is examined for the design of a topological photonic sensor which is a flexible platform that can be used for any type of sensor solely by replacing the interface layers with the sensor materials. Thus, our results will promote the development of 1D topological photonic devices.

Energy conversion of electrostrictive poly(vinylidene fluoride-co-hexafluoropropylene)/Graphene composites

This study investigates energy-conversion properties of the electrostrictive polymer, poly(vinylidene fluoride-co-hexafluoropropylene), P(VDF-HFP), filled with graphene nanosheets (GNPs). The composites (i.e., P(VDF-HFP) and GNPs) were fabricated by using the solution casting method. The dielectric constant of these electrostrictive materials was measured to observe the energy conversion property with different frequencies using an LCR meter. Their mechanical properties were measured using a photonic sensor with varying various input vibrations and electric fields to calculate their electrostrictive coefficients. These characterized results revealed that dielectric constants and electrostrictive coefficients were significantly increased when GNPs fillers were filled higher. For the electrical property, the generating current, which was measured across these polymer films, increased proportionally with respect to the adding GNPs. In this obtained result, the main finding of P(VDF-HFP)/GNPs composites is a promising electrostrictive material for applications of electromechanical energy conversions in many smart-material systems.

Whispering Gallery Mode Resonator Temperature Compensation and Refractive Index Sensing in Glucose Droplets

Among the different types of photonic sensor devices, optical whispering gallery mode resonators (WGMRs) have attracted interest due to their high level of sensitivity, small size, and ability to perform real-time temperature measurements. Here we demonstrate the applicability of temperature measurements using WGMR in both air and liquid environments. We also show that WGMR allowed measurements of the refractive index variations in an evaporating glucose–water solution droplet. The thermal tuning of WGMR can be reduced by coating WGMRs with a thin layer of polymethyl methacrylate (PMMA). Dip-coating the silica microsphere multiple times significantly reduced the resonance shift, partially compensating for the positive thermo-optical coefficient of silica. The shift direction changed the sign eventually.

Monitoring Serum Spike Protein with Disposable Photonic Biosensors Following SARS-CoV-2 Vaccination

While mRNA vaccines have been well-studied in vitro and in animals prior to their use in the human population during the Covid-19 pandemic, their exact mechanisms of inducing immunity are still being elucidated. The large-scale collection of data necessary to fully understand these mechanisms, and their variability across heterogeneous populations, requires rapid diagnostic tests that accurately measure the various biomarkers involved in the immune response following vaccination. Recently, our lab developed a novel “Disposable Photonics” platform for rapid, label-free, scalable diagnostics that utilizes photonic ring resonator sensor chips combined with plastic micropillar cards able to provide passive microfluidic flow. Here, we demonstrate the utility of this system in confirming the presence of SARS-CoV-2 spike protein in the serum of recently vaccinated subjects, as well as tracking a post-vaccination rise in anti-SARS-CoV-2 antibodies. A maximum concentration in SARS-CoV-2 spike protein was detected one day after vaccination and was reduced below detectable levels within 10 days. This highlights the applicability of our rapid photonic sensor platform for acquiring the data necessary to understand vaccine mechanisms on a large scale, as well as individual patient responses to SARS-CoV-2 mRNA vaccines.

High-accuracy source-independent radiometric calibration with low complexity for infrared photonic sensors

Radiometric calibration (RC) is an essential solution to guarantee measurements from infrared photonic sensors with certain accuracy, the main task of which is to determine the radiometric responsivity of sensor and usually be solved by comparing with some radiation source (i.e., blackbody), called source-based RC (SBRC). In addition to the complexity in manufacture, the nonideal characteristics of an available source will inevitably introduce unexpected uncertainties to reduce the final calibration accuracy by around 0.2–0.5 K in SBRC. Therefore, we propose an original source-independent RC (SIRC) principle based on modeling instead of comparing for SBRC, where the incident background radiation to detector, as a dominated factor influencing the responsivity characteristics of a photonic sensor, is modeled to implement RC for both two fundamental types (photoconductive and photovoltaic) of HgCdTe photonic detectors. The SIRC merely requires the temperature information of main components of a sensor other than some complex source and its assembly, and provides a traceable way at lower uncertainty costs relative to the traditional SBRC. The SIRC is being implemented in Fengyun-2 satellites since 2019, which ensures a long-term stable service of Chinese geostationary meteorological satellites for the global observation system under the framework of World Meteorological Organization. Moreover, a 20-year-period traceable Fengyun-2 dataset to be recalibrated with SIRC will benefit the further climate applications.

Overcoming thermo-optical dynamics in broadband nanophotonic sensing

Advances in integrated photonics open up exciting opportunities for batch-fabricated optical sensors using high-quality-factor nanophotonic cavities to achieve ultrahigh sensitivities and bandwidths. The sensitivity improves with increasing optical power; however, localized absorption and heating within a micrometer-scale mode volume prominently distorts the cavity resonances and strongly couples the sensor response to thermal dynamics, limiting the sensitivity and hindering the measurement of broadband time-dependent signals. Here, we derive a frequency-dependent photonic sensor transfer function that accounts for thermo-optical dynamics and quantitatively describes the measured broadband optomechanical signal from an integrated photonic atomic force microscopy nanomechanical probe. Using this transfer function, the probe can be operated in the high optical power, strongly thermo-optically nonlinear regime, accurately measuring low- and intermediate-frequency components of a dynamic signal while reaching a sensitivity of 0.7 fm/Hz1/2 at high frequencies, an improvement of ≈10× relative to the best performance in the linear regime. Counterintuitively, we discover that a higher transduction gain and sensitivity are achieved with lower quality-factor optical modes for low signal frequencies. Not limited to optomechanical transducers, the derived transfer function is generally valid for describing the small-signal dynamic responses of a broad range of technologically important photonic sensors subject to the thermo-optical effect.